Change the width of the border of a control of LED?

Similar Questions

• change the border color of an image control

  Hi all

  I shows 30 photos on the façade by using an image control. I want the user to select 12 peaks of 30 photos.

  is there an interactive way to show what image has been selected. I thought that it would be OK to change the color of the border of the control.

  I would like to know how to change the border color of th and you are really welcome if you have a better way to say what peak has been selected.

  Thank you

  Ritesh

  Hi Ritesh,

  in my LV7.1 installation I could change bordercolor using the tool to color in development mode, but I couldn't find a property to change the colors by programming...

  So my advice would be to put a little bigger Boolean flags (or color boxes) behind the indicators of the photo. When the image is clicked/selected just change you the color of the underlying Boolean value. In this way imitate you the colorchanging of an indicator of the photo border...

• Action to change the border color changes the color of full object instead

  Whenever I try to do an action in which I change the color of the border, the action is not the way that I save it. Instead to change the border color, as I did in the record, the action changes the color of the whole object (for the color that I have saved) and leaves the border to be black.

  Ok. I think that actions make a difference between the stroke and fill. If you have an action to apply a swatch/color, it will apply this color to everything you have 'face' (look at your tool palette: fill overlaps the race?).

  to get what you want, you may need to make a graphic with the fill color style, as you want and use the action to apply instead of the shade.

• How to change the border style of the list items in the apex

  
  Hi all

  We have created a few items from the selection list in the Apex and ask users to make changes to the border.

  I tried many ways, but he was not able to make changes, some could help me how we can change the border style of list items in Apex. By, the approach has been used by us

  Attributes of the element in the HTML form -> style = "" border: 1px solid #E5E4E2; "" [I speak that way] but no luck.

  Kind regards

  Sheikh tayeb.

  SruthiTamiri wrote:

  Hello

  Please find the details below

  APEX version # 3.2

  Internet Explorer version #7

  Mozilla version 12.0.

  Used theme #Blue

  Topic identification number is #12

  It is not possible to change the appearance of the borders of the selection list in IE7.

  To the borders of all the elements of the selection list style on a page in other browsers, include the following style sheet in the HTML Header page:

  .formlayout select {
    border: 1px solid #E5E4E2;
  }
  

  APEX 3.2 is no longer supported, and IE7 is obsolete. Upgrade to the current version is recommended.

• How to change the properties for some controls at run time?

  Hello

  I would like to change some properties for some controls in front of Panel at run time. Number of properties of the control I want to change is based on a newspaper user file opens in the final application.

  I've attached an example where I'm changing the visibility of digital controls. Problem I have I don't know what reference to connect to the property node in the case where the control loop for is not a digital control. The example is based on the label.text property but I could use the more generic classname property as well.

  Kind regards

  Petri

  Initially, a control has no legend.  It is not just the caption string is empty and the legend isn't visible, but the caption object does not exist.

  At the time of change, when a legend is on something other than an empty string, the object of legend is created.  If you redefine the legend with an empty string, the object of legend is deleted.

  During execution, the object of the legend cannot be created or destroyed, but if it exists, it can be changed.

  When I legends I want to change during execution, I initially affect the '. '.

• How can I change the value of a control on front panel?

  On the front panel, I'm doing a complex control that consists of a Slider control and control of the digital inputs. Both controls display the same information and either may be used for entry. When changing value, I want the other control to display the same value.

  How can I change the value of a control on front flap when another control changes the value? I know how to use a structure of the event to detect value has changed, but I do not know how to impose control on front panel to change its value in the block diagram.

  Why do you not use a digital display on the slider, and no code is required:

  

  EDIT: Yes, he said. ***

• Change the tab order of controls installation changes

  Hello

  When designing my UIR for a new project, I realized that when I use the function "change the controls' to change the attributes of several controls at once, the tab order changes.

  I noticed that, because the constants of the UIR are essential for my application and they are changed automatically in the header file according to the tab order.

  If I change the attributes one by one, then the tab order is preserved.

  Is it really a bug or am I missing a point here?

  (I'm with CVI 8.5.1)

  Thank you for the provision of the UIR and for reporting this bug. Unfortunately, it has been reported too late to get into the next version 9.0, but we will try to fix it in the maintenance release.

  -jared

• Is there an easy way to change the border color in CS4 image?

  This is probably a ridiculously simple question, but I have scoured my book resources and can't seem to find the answer, although I find the topic. (And I'm new to Dreamweaver but by my question, which is no doubt already apparent). So, on my index page (oamasters.com), when I added a border to the image on top, the border was blue. However, on the page pictures, when I added a border to the border color was black. I know not how/if/when I put one of those, but now I need to change and don't know where to go. Looks like it was an easy fix and it's probably, I just can't understand it. In particular, the pictures on the photo page. Thanks in advance for any help, you can suggest.

  See you soon,.

  Betty.

  Use CSS.  Add this to your embedded CSS or external style sheet.

  IMG {border: 4px solid #0062C 8 ;}}

  It is a light blue border around all the images in your site.  Change the color and width (px) to be agreed.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• Change the border color

  How can I change the color of the borders of a red button on the click event

  Thank you

  Can be done with the script on clik the button event.

  1. go in "Border properties" of the button and update the "relief - 3D" (this can be a default) to "Solid" in the drop down menu.

  2. If you need any default color for the border before you click, you can select a color from the color white select palette elase.

  3. now assign red color for the border on the click event of the button, put the script on the click event of the button below.

  This.Border.Edge.Color.Value = "255, 0,0;

  4. now you can see the red border button on the click event, if you need wider of the border can be increased the size of "border properties" button.

  Hope this will help.

• Change the border color of the overview image

  The search for solutions on the web at this problem seems only to show manual changes in the CSS code. I'm looking for the solution of how to proceed in Dreamweaver. Being new development web I want to keep my code run by Dreamweaver rather than beginning to hack the code myself who could create an uncontrollable mess!

  The problem

  ------------------

  I have a developed page which is a gallery of thumbnails.

  When the user clicks on a thumbnail, I want to launch a new window and display the magnified image.

  It's easy to work in Dreamweaver with the behavior Add < window >.

  However, if you use Add-behavior you lose the 'hand' when you move the thumbnail image.

  So as a workaround to lose the 'hand', I would like to change the color of the border of the miniature of the "bubble".

  I have a CSS govern together 'thumbnailBorder' to the top (in a model) that correctly gives a gray px border 3 any thumbnail images with this style is applied.

  The Question

  -------------------

  How can I change the "thumbnailBorder" CSS rule (using Dreamweaver) so that it changes the color of the border when the image is hovered over?

  Thank you very much

  As soon as I remove the link in the field of the Properties tag disappears.

  Of course, so put it back.  You can even simply enter "#" in the link of properties field and press return to do this.  Now you have a link here and use it.

  But tell me again why the first method (which also works) was not working for you?  You simply apply the behavior of Windows OpenBrowser directly to the image.  After clicking on OK, and with the selected image, override you the onclick onclick EVENT behavior.

• Change the border color of the elements required

  Adobe Livecycle Designer ES v8.2.1

  Dynamic PDF

  I spent the last hour searching the tangential broken links and tutorials. I have a group of required exclusion (radio buttons), and the user must select one of the values so that the form is valid. The problem is, I have hundreds of boxes, and they all have a gigantic red border stuck around them. There is no highlight when it is not verified and the form is submitted, they are all simply bright red.

  Here is what I tried:

  Group of exclusion on "initialize".

  This.Border.Presence = "invisible";

  This.Border.Edge.Presence = "invisible";

  This.Border.Fill.Presence = "invisible";

  this.borderColor.fillColor = "invisible";

  this.borderColor.presence = "invisible";

  this.fillColor.presence = "invisible";

  Group of exclusion on 'form::ready '.

  This.Border.Presence = "invisible";

  This.Border.Edge.Presence = "invisible";

  This.Border.Fill.Presence = "invisible";

  this.borderColor.fillColor = "invisible";

  this.borderColor.presence = "invisible";

  this.fillColor.presence = "invisible";

  Group of exclusion on 'layout::ready '.

  This.Border.Presence = "invisible";

  This.Border.Edge.Presence = "invisible";

  This.Border.Fill.Presence = "invisible";

  this.borderColor.fillColor = "invisible";

  this.borderColor.presence = "invisible";

  this.fillColor.presence = "invisible";

  None of them work. Is there honestly no way to control the border color / visibility of a required element? I can do him point together disappear pretty easy but that solves nothing. If the default value is not an option that the customer wants to ensure that all fields have been reviewed by the "clicked".

  Thanks for your time.

  Hello

  LC Designer ES2 has improved handling for Forms validation. It does not require the user to have version 9 of Acrobat/Reader.

  

  So, for these features, you must upgrade to LC Designer ES2 and you need be happy that your users would have version 9 of Acrobat/Reader.

  If this isn't the case, then you can enable and disable highlighting. However, this applies to all fields. Also you can change the color of the highlighted field using script, you can change the color of the Red manditory border. See: http://assure.ly/ * 6tn.

  John Brinkman has several examples of custom/scripted validation models, with samples:

  http://blogs.Adobe.com/formfeed/2008/11/validation_patterns_part_1.html

  http://blogs.Adobe.com/formfeed/2008/11/validation_patterns_part_2.html

  http://blogs.Adobe.com/formfeed/2008/11/validation_patterns_part_3.html

  Hope that helps,

  Niall

• How to change the border against zero using javascript?

  Hello

  guys im quite new to adobe live cycle designer es2 I have a really easy.

  How can I change the hour or the appearance of a solid against zero TextBox after pressing a button

  I tried this on the FTT even click a button but seems to not work.

  NumericField1 [0] .border = 'None ';

  any suggestions? would be appreciated a youn noob.

  Hello

  The problem in your form was that it has been defined as static form.

  You must do the following to make the script work.

  (1) file menu Goto-> properties of the form and select the default values tab change the default rendering in dynamic XML form Format

  (2) select the Preview Tab. Set the type of overview as a form 'Interactive form' and preview Adobe XML dynamic XML form

  (3) Finally, while saving the PDF select Save As Type 'Adobe Dynamic XML Form.

  I corrected the form and is available at the link below.

  https://Acrobat.com/#d=R7qmed71zsu744V0Qvddvg

  Also try to give unique names to controls that are not related to each other.

  Thank you

  Srini

• Change the border color of text field based on a value from the drop-down list

  I have a dropdown menu with 4 choices of priority for maintenance.  With a javascript script, I need to be able to select a 'priority' in a list box and a text box border then color with an appropriate color.

  'High priority' with an export value of 0

  "Medium priority" with a value of exports of 1

  'Low priority' of an export value of 2

  "When the time allowed" with a value of exports of 3

  When one of these selections has been filed, a text box becomes available in order to write the gap. My goal is as follows.

  When "High priority" is selected, the border of the text box where you write the gap would blush.

  When "Moderately urgent" is checked, the border around the text box where you write the gap would turn yellow.

  When "Low Priority" is checked, the border of the text box where you write the gap would become green.

  When "when she allows" is checked, the border around the text box where you write the gap would have turned blue.

  Otherwise, the border would be white.

  This form will be used ultimately on an iPad using Expert PDF under the player.     I use Acrobat X to create the form.

  Any help would be appreciated.

  Yes, I accidentally left a hug. I can fix it so it won't be a problem if someone tries to use it. Happy that you guessed it work.

  To handle resetting, you can use a script to validate drop-down list:

  Script to Validate drop-down list

  If (event.value = "" "") {}

  getField("discrepancy_1").strokeColor = color.white;

  }

• To change the data type of control/led

  Is it possible to change the underlying data type of the indicator or a control?  I a VI that I want to use that accepts any type of data (essentially data varriant) and display it accordingly.  I have different controls selected to display data of different types in the sense of data vs decimal boolean data vs integer, but certain types of data will be of type uint32 vs int16 vs uint64 etc..  Is it possible to programmatically change the data type, so I need to have all the combinations of indicators?

  The short answer is no. The long answer is that LabVIEW has not 'generic' controls that allow you to display any type of data (apart from the variant of course). There are several ways to address this problem, but all require you as the programmer to manage explicitly each type of data you could possibly meet. Here are some possibilities (in no particular order), please let me know if you would like to help a particular implementation of these.

  1. Force incoming data to variant, use the info option to determine the data type of the original data in a case structure (open G can do this VERY easy), have an indicator on the front panel for each type of data you want and hide those unused
  2. Use a sub-group of experts on the front panel and sub - vi call of to view specific types (that lends itself very well to encapsulate your data in a class and you leave OOP allows to expand into different types of data)
  3. Use a tab with the variant (similar to option 1) control put each kind of data in its own tab, enable only the current
  4. Do a Control-X to accept a Variant option 1 under the hood
  5. Just as a string of format and use a string indicator

  That's all I can think of right now, once again, let me know if you need more information/help on the options.

• Dynamically change the elements in a control menu ring array

  I have a table menu ring controls (32 rows, 5 columns).  When a menu choice is made in the first column of a given line, the content of the menu for the following columns (same line) ring may vary.  If this is possible, how would you do it?  Thank you.

  jschichl wrote:

  For example, if I had a ring of 1,2,3,4 menu.  I want to write a logic that says that when the 4 is selected, then ring menu in the following line replaces 5,6,7,8.

  A ring is just a number as far as LabVIEW is concerned, so the cluster underlying need only store numbers, not rings.

  In the example I posted in a thread bound, where the controls are moved on a table, you need to control a ring. Whenever you show the ring, you can assign a new set of strings and values, using the property of strings and values. You can decide what the value of the channels show based on the existing data in the cluster, which will be updated each time you change the value in a cell in the table. Who is? I don't have the time now to set up a more detailed example than what I already downloaded in other threads, and it is only a small change to it.

  Ring menu updated at the time wherever the user wants to select a value from it, not at the time the user changes the value that determines which set of menu items to display.