Change Win7 64-bit to 32-bit on the Satellite Pro C660-16N

Similar Questions

• Satellite Pro C660-1JL - how to change the language of Windows 7?

  Hello

  I bought Toshiba preinstalled official Windows 7 Professional 64 service Pack 1. And I would like to change the language from German to the Russia.
  In accordance with the instructions of the microsoft home page I could not get the result. MUI Pack does not appear when you are looking for Windows updated (some other updates are available only, but not language pack)...

  What would you recommend how to fix this?
  Its Satellite Pro C660-1JL

  Hey,.

  > I bought Toshiba preinstalled official Windows 7 Professional 64 service Pack 1
  You can change the language on Windows 7 Professional t, this is possible on Windows 7 Enterprise (volume license) and Windows 7 Ultimate edition.

  So if you want another language, buy Windows 7 Ultimate or be happy with the current language of Windows 7 Professional. ;)

• Need to Win7 32 bit drivers for Satellite C660-1MP

  I recently bought by Satellite C660-1MP
  Product Code PSC1NE - 006004G 5

  I bought Windows7 32 bit

  I tried 32 bit drivers on the toshiba site and there is no 32-bit. I tried vain to 64-bit.

  Please advice if you have the correct drivers. I canoe install the 64-bit version caused you some conflicts between applications.

  You are right. Drivers for Win7 32-bit are not available. But there is one interesting thing: your laptop has Intel HM65 Express Chipset, this chipset is offered on several other models and none of them are supported for 32 bit OS.

  I tried to find something but unfortunately without success. I'm sorry. Try to find the driver on Intel support page. If you have made know us. We can try to find other important factors.

• Need to WIn7 32 bit drivers for Satellite A660-14 t

  Where can I find drivers for Satellite A660-14 t for Win7 32 bit. ????? ?? ??????

  Help, please

  If your laptop is not supported for Win7 32 bit, you won't find them on one place but should probably take Win7 32 bit drivers for the different laptop models.

  Is that what you have already installed Win32bit on your laptop?
  Do you need a specific driver?

• Hard drive does not correctly identified under Win7 64 bit and the blocking of access to the disk.

  I use a Maxtor Ultra 16 L01F500 SATA, but Win7 (64 bit) is to identify it as a SCSI drive Maxtor L100P0. He not only identifies by mistake, but also blocks access. I get an error indicating that the location is not accessible. Under computer management, the drive is there and gives the correct size and format (NTFS - was previously my main drive until I upgraded to Win7) when we look under properties. Also, Windows shows the drive is healthy and active. Don't know what to do to get access again (I have admin access to the player thought that would help). I also ran the disk error checking and it showed no errors. You don't know why Win7 has misidentified or why it will not allow access. Any info or help would be appreciated. I can't seem to find the drivers for the drive, otherwise I would have tried that. Thanks for reading.

  In disk management, remove this disk partitions, and then create a new partition

• Where to find Win XP 64 bit for the Satellite M305D-S4830 energy management/conservation

  I was able to completely load Windows XP 64-bit on my Satellite M305D-S4830 with all the drivers.
  Everything is great except my battery only lasts is not too long to work.

  I've searched but have not been able to find a working copy of Toshiba Power Saver that works on my laptop with XP 64.

  Any ideas or suggestions?

  Hello!

  I think that you will not find a 64-bit version of Toshiba Power Saver.
  Toshiba is not compatible XP 64 bits are therefore no available 64-bit software.

  You must use the Windows settings or change you to Vista 64-bit. Vista has more options for saving energy and it s the same as energy saving.

  Good bye

• Installation of Vista 64 bit on the Satellite P500/025

  I just bought a P500/025 and should have chosen installation 64 bit but installed 32-bit instead.
  Could someone please give me instructions on how to install vista 64-bit on Vista 32 bit?

  I will lose everything I have installed on my current installation of 32-bit?
  Thanks in advance.

  Before starting the discussion on the installation of Vista 64-bit, visit the Toshiba download page and check if this laptop is 64 bit supported and if you can find all drivers 64-bit.
  I assume you have an Australian model of laptop. Do you have?

  Download page for Toshiba Australia - http://www.isd.toshiba.com.au/71/live.dll/topic/content/driver_search.jsp?MODE=NPRO&CATOID=-15058

• Change of keyboard USB external Apple connected to the Macbook Pro

  Dear ladies and gentlemen,

  I need your help. I have a MacBook Pro running the last Sierra 17 "MacOS. I bought a 27 "Thunderbolt display and wanted to use a full external keyboard USB Apple (with the help of the digital keys). I have connected to the screen "USB port, closed down the internal screen MacBook... magic happened... keyboard poped office to the top of the screen external AND external full resolution was working properly..." Unfortunately only for 1-2 minutes, then the layout changed back irreversible in a layout resembling the layout if I would press "alt". Only way I could "resolve" to disconnect the keyboard USB plug and then plug again... but after 1-2 minutes did the same thing...

  I tried to plug the USB plug into the MacBook Pro directly, but the same thing happened...

  I am so unhappy that I can't use correctly the full length external Apple keyboard, large... Any hint/resolution?

  Thank you for your help in advance,

  Péter

  System Preferences > keyboard > Input Sources > [√] see Input menu in the menu bar

  ... then the menu icon before, choose «Show Keyboard Viewer»

  Now, look at the chart of the keyboard that appears on the screen. If the Alt/Option key is stuck, the key will be gray, as if it is held down. If you press it again, he himself is not?

• Satellite Z830 - 64it change Win7 32 bit version

  I just bought a Satellite Z830 PT22LA-001001 which comes with Windows 7 64 - pulled upward and began to load my favorite programs/applications - almost all who are several years old at least! I find that virtually none of them work.

  Could not load the 32-bit Windows 7 vsn?

  I choose if I do a recovery? (I did have a choice when I started the computer)

  > Would it not possible to load the 32-bit Windows 7 vsn?
  Of course, BUT before you anything create recovery DVDs that you can use in the future, in case you want to have once again the factory settings AND check the support from Toshiba and download if page your cell phone is supported for 32-bit version. If Toshiba supports 32-bit for your laptop model and offer all necessary drivers, tools and utilities you can do.

  If this is not the case it may be problematic to find these things and it will be better to stay with the 64-bit version.
  > Can I choose if I do a recovery?
  Unfortunately not because the recovery that one image is saved on the HARD disk and you cannot switch between two different versions of the OS.

  If you have any other questions you are welcome.

• BSOD when trying to install Win7 64 bit with the new motherboard

  Hi all

  I have the following BSOD problem:
  I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.

  Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.

  My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)

  I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.

  If you have any suggestions, please, don't keep it to yourself :-D

  Thank you!
  Alex

  Hello

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ==============================================

  References to Vista also apply to Windows 7.

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  General troubleshooting BlueScreen to use with the methods above.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Can't find Win7 64 bit drivers for Satellite S50 - 10 p

  Hey, there don't seem to be drivers for this laptop for windows 7... just windows 8

  I managed to install most of them anyway using this page: http://support.toshiba.com/drivers and selecting windows 7 64 bit it and install missing drivers (hopefully, they are actually compatible, everything seems to work fine) but there aren't only one I can't understand what it is, it shows up as unknown device under other devices in Device Manager

  research in Information System and the website of pcidatabase.com, I found this: http://www.pcidatabase.com/search.php?device_search_str=DABA3FF&device_search = search

  which seems that either, but I still have no idea what it is and what driver I need for this...

  could someone help me please?

  Thank you!

  What lack you is BT. You can download it from http://aps2.toshiba-tro.de/bluetooth/

  Can you please post cell phone number?

• I accidentally installed Win7 32 bit on my Satellite L505-110

  If I had to format my computer. I used the cd that came with the laptop. (Satellite L505-110) Which is Windows 7 32 bit. I discovered he had the 64-bit installation program in the drive "C". and now I'm stuck with 32-bit which is trolling. I can't even surf the internet. I need another format.

  My computer gurantee ended. If an ask for 64 bit cd will send a? I am a student and I have no money to buy :/ (Sorry for the bad language)

  Hello

  Your only mistake is that you don't l l create original recovery disk. Now after the original 32 bit version 64-bit version is available on your laptop more.
  You can order the 64-bit version, but unfortunately it is not for free. It costs about 30 euros.

  Please visit https://backupmedia.toshiba.eu/landing.aspx and you you can find all the information on the order of recovery disk.

• Dual boot Win7 32 bit and the 64 bit Win8?

  In anticipation to Windows 8 be accessible to the masses, I would like to know what are the possibilities to install 64-bit Windows 8 when Windows 7 32-bit is already installed.

  Would Windows 7 32 bit and all the 32-bit drivers need to be reinstalled with the 64-bit versions?

  Which means a complete reinstallation of parameters/data and applications existing/installed all be kept or partition the hard disk drive and to start new to new is the only solution?

  Or install another hard drive would be more appropriate?

  In anticipation to Windows 8 be accessible to the masses, I would like to know what are the possibilities to install 64-bit Windows 8 when Windows 7 32-bit is already installed.

  Would Windows 7 32 bit and all the 32-bit drivers need to be reinstalled with the 64-bit versions?

  If you dual-boot Windows 7 32-bit and 64-bit Windows 8, you will need to install the 64-bit native drivers. Windows 8 and 7 64 bit do not support 32-bit drivers.

  Which means a complete reinstallation of parameters/data and applications existing/installed all be kept or partition the hard disk drive and to start new to new is the only solution?

  Yes, you will have to reinstall applications too. You will be able to migrate your personal files and settings by using the Windows Easy Transfer utility.

  Or install another hard drive would be more appropriate?

  You can install it on another partition or hard disk. If you are installing on another partition or hard drive, you will need a full version of Windows 8.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• Win7 64 bit, all the devices code 52 after unsigned driver install

  I am running Windows 7 Pro 64-bit in test mode, I accidentally forgot to 'fake sign' a libusb-win32 with "driver signature enforcement overrider" driver forehand and tried to installed, the computer froze during installation and then after a hard reset, most of the devices in the Device Manager show a code 52 (windows cannot verify the digital signature for the drivers required for this device). This error applies to the devices even with drivers faith. No USB devices work since the host controller will not work. I can't use my mouse or access the internet from this computer (wireless and ethernet also does not work).

  I uninstalled entries hidden for the device I've initially tried to install and rebooted and still the problem has not disappeared.

  I have no System Restore enabled.

  Disabling test mode is not enough, even after rebooting.

  delete the DLL and SYS to C:/Windows libusb0 did not help

  Reinstall the Dell WLAN drivers does not resolve wireless

  beginning with "Disable Driver Signature Enforcement" does not help

  Unable to perform the backup due to not having any capacity USB or network

  Frank_26080115,

  See the link below to put on with similar problem and try the steps mentioned by"Gokul T" and check if it helps!

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/2379017c-D513-478C-A184-0d1b7cd408b2

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Do not start after having been arrested in the menu "alt + f4" in win7 64 bit for the first time

  I always stop the laptop from the start menu. But now when I stopped it for the first time by the "alt + f4" - menu, it does not restart. Or rather, it starts, but looks like the HARD disc spins down after a second or two, and he did not get past the first screen of boot of Lenovo. I can hit the ESC key to see the detailed (with RAM-tests and other) boot screen, but then nothing happens. I can't go in the BIOS or boot menu. And it does not start on a dvd of Win7. Any ideas?

  Sorry, apparently, that was my (Corsair F-Series 90 GB) SSD that suddenly broke down. I'm back to Corsair.

  Problem solved I guess.