Change Windows 10 and CC2015 works correctly.
I recently changed my windows 10 and now CC2015 works correctly.
Bridge and Camera Raw works correctly, but when Photoshop try to open still I have a message and closed.
Hi miguinini,
I think that you have installed in your PS Nik that is causing the problem, you may need to reinstall Nik and as if now open PS while holding the shift button, a prompt should appear click Yes or no, please click Yes and PS will open
Concerning
Rohit
Tags: Photoshop
Similar Questions
-
Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.
What should I do next
Hello
- Are you referring to the NEC USB Floppy Driver?
- You try to format floppy disks?
- Was - this earlier work, if so, did the chnages on the computer before this problem?
If it worked, I suggest the following methods and check the status of the issue.
Method 1:
Open the hardware and devices troubleshooter.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Update a hardware driver that is not working properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
Satellite A300-1EH - windows installer does not work correctly
Hello, this is my first post on this forum!
My windows installer does not work correctly.
What should do?Soryy, but I did not now much on computer systems.
I have reinstall this installer?I'm waiting for your answers.
> My windows installer does not work correctly.
What do you mean exactly? You see a mistake? What exactly happens?
Maybe your CD is scratched or damaged. -
Some virtual machines have intermittent network connectivity problems and rest work correctly. The VMs are in the same group of port and on a 4-node cluster. Physical network interface cards are appearing in vsphere client
Please confirm if the issue has been resolved after you complete the steps.
-
Has anyone upgraded one aspire 7520 to windows 8 and found the correct graphics drivers?
I clean installed an upgrade of Windows 8 32-bit on an Aspire 7520 (graphics, GeForce 7000 M) previously under Vista 32.
The graphics driver has been replaced by a generic driver from Microsoft that works for simple use, but has limited resolution (1024 * 768) and cannot correctly the video.
Device Manager indicates that there are 4 devices lack drivers. I healed two by downloading the card reader driver Ricoh (v 6.10.01.03) for Windows 7/32 of Acer and another by downloading the driver AMT_ENE also from Acer for Win 7/32.
The dveice remaining is presented as "co-processor", so I expected to fix this by downloading graphics drivers for Win7/32 x 86 Acer site. I tried several versions which load ok and seeing full resoultion on the desktop BUT the lock on the new start screen - bottom shows, applications disappear after a few seconds and Manager tasks indicates Windows explore burn 50% cpu. Device Manager still shows the coprocessor as not having not a pilot, but the graphics card shows Nvidia driver did not install Microsoft. The only solution is to roll back that the graphics display driver Microsoft generic adapter.
I also tried to load the latest chipset NVIDIA MCP67 Win7/32 chipset for Acer's drivers, but the installation program never ends properly.
Any advice welcome. Piriform Speccy Chipset is MCP67M, Nforce 560, motherboard (bios?) v 1.09
I found a video driver that works: install 7.15.11.7948 by downloading the Windows 7 beta driver 179,48 for nForce 610M from www.siliconguide.com/drivers/device/2307/ . (also at /2306/ even file available for GeForce 7000 M).
Simply download the file is a .exe and run it.
Full resolution of 1440 * 900 is now posted and the video plays smoothly.
Note This is a more recent driver version for Windows 7 or Vista 32 times install version 167.49 (7.15.11.6749) available on the Acer support site - this does not work for Windows 8.
Applications and Windows 8 seems to work now in the new interface and desktop modes very well.
The Device Manager shows always "other device" VEN_10DE & DEV_0543 & SUBSYS_01261025 & Rev_A2 as having no driver... always looking for it.
-
As I said in the title, my hard drive went bad on my Dell XPS 420. I was running 32 bit windows vista service Pack 2 since the last time my hard drive gone bad. The first time I replaced my hard drive I used the cd of Windows Vista install with cd drivers and using automatic updates of windows. In a few hours, I had my pc up and running. But with this record, it's a completely different story.
I did the same thing with her. Installed Windows and drivers as before and I go ahead and do the automatic updates. Everything is okay until I get to point when I download and install windows Service Pack 1. I download, install and it seems to work very well. Then it restarts to complete the installation and configuration. After about 30 minutes of this, he finally said service pack error. Restoration of the changes. He then takes 30 minutes more to do. After that, I get a screen saying that Windows does not start. A recent hardware or software change might be the cause. Follow-up by telling him to use the windows cd repair section.I did this 3 or 4 times to do different techniques. I did it with the automatic windows update. Manually as an administrator. After using the analysis tool in Windows Vista and in another way when restore you some files. I am about to throw my pc because I've probably spent nearly 10 hours of messing around with it and honestly it's not my time unless there is ANOTHER way that deserves to be tried before I "Offices" of the thing.Honestly, I think I read every article on this subject online. If I type in service pack 1 and vista online I went to all the links on the first 10-12 pages...If anyone has AN idea please let me know. Yes, I would like at the office space that it but it would also be good to have another pc with a new hard drive...Thank you.Hello
If you go to Start, all programs, Windows Update and view update history, you will see the entry failed for SP1.
If you right-click and choose details, it should give you the details of the error.
You can also read the following article and check:
-
My computer crashed and it was restored. I am running Windows XP and I do not re - install Firefox Aurora after the computer has been restored with the new motherboard and HDs. All my software works, but the AutoComplete is not the case. Firefox remembers my username for login and my password. It's just the AutoComplete. I have to tap completely in the name of the site. When I opened the window of the history and bookmarks, there is no entry. The yellow star in the address bar does not work. When I click it, nothing happens.
You can temporarily rename the file to places.sqlite.sav as a test.
-
Get a message that Windows Installer does not work correctly.
Original title: Windows Installer problem
I get a message that my Windows Installer is not workiing correctly. What should I do?
Thanks to all who tried to help. I finally finished on the pone to a tech assistant who could still find a solution. End of the story: crossed the system recovery and I am now busy do everything to come back as much as I can. Thanks again for your efforts.
-
Windows hangs and nothing works, when I go to the Twitter site
I have a strange problem. I am running Firefox, Windows 7 64 bit. Windows by hanging anything works keyboard, mouse, Manager of the tasks. He does for about 3 minutes, then it goes again. The funny part is he does it only when I go to my Twitter page. Also windows Explorer closes a little work. Happens that when I use Firefox, Chrome, IE all other browsers do not cause windows to hang all tried. Fire fox will stop responding, then start up again only on my Twitter page. Ago that I know that Firefox is the problem, but their support is saying that Firefox can not cause Windows hang on Twitter. Funny, it seems that these problems begin when I install Firefox. But everyone tells me it's a matter of Windows. Can anyone help?
Hello
If you have only these problems when using Firefox, the solution seems obvious.
Stop using Firefox and and uninstall this browser.
Start using another browser that works.
Concerning
-
Cannot change the font - "changing windows color and metrics" partially disabled
Hello
All of a sudden my fonts system has changed and I can't change them back.
That's what I see when I open 'change the metrics and the windows colors'.
http://ImageShack.us/photo/my-images/198/capturevlx.jpg/
I can't scroll in this window, and I can't make changes to fonts.
I have tried rebooting etc.
Help, please.Thank you!
I thought about it - the fonts were corrupted
I went in the fonts folder and deleted everything I could (some files were 'in service').
I found online to a package with the default fonts of Windows7.
I copied all drag them to the fonts folder, replacing what I could: the problem was fixed immediately! -
All Windows programs do not work correctly. !
Including: Windows Media Player, Windows Media Center & Windows Live Photo Gallery.
Usually, he will say 'No response' for Windows Media Player & Windows Live Photo Gallery.
Windows Media Center says "a necessary component of the Windows Media Center has not started properly. Restart Windows media Center.
I'm not a computer guy and do not know what is happening. Help, please!restore your video driver or reinstall it.BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
Windows 7 Sp3. using Firefox 7.01
Non admin users.
Home page change to what they want and it can work.
BUT when they close firefox and open it again the home page goes back to the default settingYou have a (security) installed software that can restore files when starting?
See:
-
I bought a LR 6 license and I I've installed on my Windows PC slot, I'll change the hard drive pour an SSD, can I use the same license with the serial no that was provided to me and how? I'm going to buy an APPLE Mac computer, can I use the license I bought pour install on the Mac? and how?
Hello
You can install Lightroom on 2 computers according to your license.
You can download it from the following link: https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html
Kind regards
Tanuj
-
I'm tring to burn a cd in the drive, windows media and nothings working
, I click Start burn, and two seconds later at the bottom it will say burn complete but my cd is not out and that's what I put for. to have the cd pop when its actually burn. Help?
Hi whitekidd,
1 did you change on your computer before the show?
2. how many time in the face of this problem?
3. do you have a third-party software installed on your computer to burn?
Method: 1
If you have any third-party burning software then I suggest you to uninstall the software and check how it works.
Method: 2
Also perform in the form of troubleshooting steps the following article.
-
"Stop" Windows function does not work correctly
My windows stop does not. I can only close by manually pressing the power button or by Log off-change user-windows stop - stop.
Pls help.
Hello
It's not easy to say why the closure works doesn t work.
But above all harm or damage registry entries are responsible for these issues.
You can try to use the System Restore tool to roll back the OS to the beginning.In addition, you can consult the Microsoft document that described the shutdown problems in Windows XP. It s useful. Check it out.
http://support.Microsoft.com/kb/308029/en-us/
Maybe you are looking for
-
Why does Firefox not open the site Web (or Google searches) more when I type a Word?
In the latest version of Firefox, when I typed in a word (for example "Amazon" to go to amazon.com) it directed me to the Web site instantly most of the time, if he doesn't not it would redirect me to Google search results for the word I typed.Now, w
-
Computer crash: memory dump
After a system update to install KB973879, KB970653 and KB972036 on 8-26), the system has crashed 3 times on its own, and twice when I removed the Flash DRIVE to the printer with an error message about the memory dump (I don't remember exactly what h
-
HP OfficeJet 4500 (g5010g-m) report shows network offline status.
After plugging the ethernet cable, the printer indicates Network Status: offline. How can I get the printer to recognize/go online?
-
Hi all I have a client who uses a 506e with the cleint 4.02 for the remote VPN Cisco. The pix is multiple inside roads. The first network inside is 192.168.1.X and E1 of the 506 is 192.168.1.1. The second network is 10.71.56.X. The problem is as soon
-
My serial number does not work for elements of the Prem. What should I do?
I try to install the first Elements 8. My serial number does not work. What should I do? I looked the number up when I logged on the Adobe site. I am using Windows