Changes in the driver vi using the Simulation Interface Toolkit (SIT) for PXI get do not appear.
Hello
I use Simulation Interface Toolkit to target a controller built in Simulink on a PXI target. I used the SIT connection manager to generate the driver screws I had to make some changes in the screw driver specifically Read.vi IO. I made the changes and the entire application runs without error. But the changes are not getting in the functioning of the application, essentially when I load the thing on PXI and run it, it contains exactly as it was before behaiving I made these changes. Some how the changes I make to the Read.vi of e/s are not begin day somewhere in the top vi driver.
Could someone help me with this please.
Eliane.
Hi Justin_P,
Thank you very much for the reply. Solved the problem. What you're saying, that's certainly true, but I do not use the project.
The problem was that whenever it makes a change one driver that saw VI top-level driver must be opened and saved again. This opening and registration links the pilot with new changed correctly VI and then everything works fine.
Thanks again.
Eliane.
Tags: NI Hardware
Similar Questions
-
During the installation of an update for Skype get device not detected DirectX error
Original title: is no longer detected device DirectX
When you install an update to Skype, it crashed (and does so every time I have install and reinstall) peripheral suitor DirectX not detected. Someone knows what to do?
Hello
· The issue is only with Skype?
· What operating system do you use?
I suggest you to contact the Skype support for any known problem connects to the update of Skype.
See also:
Diagnosing basic problems with DirectX
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX
Run the DirectX Diagnostic tool
http://Windows.Microsoft.com/en-us/Windows-Vista/run-DirectX-Diagnostic-tool
-
Reproduction of example of Simulation Interface Toolkit
Hello everyone,
trying to replicate the example provided in the Simulation Interface Toolkit - how-to , I am facing an error with LabVIEW 2009.
I have created a host VI working with the file .mdl Simulink on localhost as Simulation environment that runs smoothly.
And I can't properly compile the file desired .dll (sinewave.dll) with Simulink and nidll.tlc.
But if I want to use a cRio-9024 as time real target FPGA-interface I get the following error when I start the host-VI:
Missing file of Simulation Model
The sinewave.out simulation file could not lie in the projected paths. Please FTP the file manually to your system in real time.
The following planned paths do not contain the simulation model:
C:\ [...] \sinewave_nidll_vxworks_rtw\sinewave.out
C:\ [...] \sinewave_nidll_rtw\sinewave.out>>>
It's the State of deployment resulting:
Initializing...
Calculating dependencies...
The checking for conflicts. This may take some time...
Prepare the items for download. This may take some time...
Deployment NI_FileType.lvlib
Deployment NI_SIT_util.lvlib
Deployment NI_LVConfig.lvlib
Deployment NI_SIT_Replay.lvlib
Deployment XDNodeRunTimeDep.lvlib
Deployment NI_SIT_Data Log.lvlib
Deployment NI_SIT_SITServer.lvlib
Deployment NI_SIT_driversupportVIs.lvlib
Deployment NI_SIT_ClientConnMngr.lvlib
Deployment NI_SIT_sitctls.lvlib
Deployment sinewave_Driver.lvproj
Deployment of NO-Mess-Fix(successfully deployed target settings)
Deployment NI_SIT_Data Log.lvlib:Expand Signal Name.vi (7.85 K)
Number.VI NI_SIT_Data Log.lvlib:Get group deployment (4.46 K)
Deployment of Text.vi "BOLD" (11.92 K)
Deployment whitespace.ctl (2.09 K)
Deploy the value string Value.vi (5.06 K)
Deployment of NI_SIT_Replay.lvlib:Wait for Ack.vi (5.50 K)
Deployment NI_SIT_driversupportVIs.lvlibIT pilot FP Strings.vi (2.31 K)
Deployment NI_SIT_driversupportVIs.lvlibCommand.ctl Server IT (2.09 K)
Deployment NI_SIT_Data Log.lvlib:Enable turn off Item.vi LPG (13.12 K)
Deployment NI_SIT_Data Log.lvliband group probe list is activated (9,54 K) Groups.vi
Deployment NI_SIT_Data Log.lvliband group probe list active record State.vi (7,41 KB)
Deployment NI_SIT_driversupportVIs.lvlibcalendar Src.viNI_SIT_driversupportVIs.lvlib ITIT Timing Src.vi loaded with errors on the target and was closed.
LabVIEW: Unable to load the shared library SIT_TimingInterface.*IT_InitTimingSrc:C on the device target RT.
LabVIEW: Unable to load the shared library SIT_TimingInterface.*IT_GenerateOneTick:C on the device target RT.
LabVIEW: Unable to load the shared library SIT_TimingInterface.*IT_ClearTimingSrc:C on the device target RT.
Deployment of container NO-Mess-Fix
Completed with errors of deployment>>>
Why should I produce a file called sinewave.out? I don't think that I really need.
Can someone tell me please how to use the sinewave.dll properly to make it work on my cRio?
(I don't want to use e/s material and yet, just run the file .dll on the cRio.)
The best help for would be a description step by step from a VI of work using sinewave.mdl inside LabVIEW with ready to use sinewave.dll.
I need to examine any document in order to complete this example?
Thanks for your effort!
Hi Jan,
Yes it s a target VxWorks.
Marco
-
I would like to be able to programmatically change the time step, a Simulink model uses when it is called by the model Interface Toolkit LabVIEW. The time step is a template parameter or a signal of model. Is this possible to do?
It is not possible. The timestep for the model is fixed and compiled in the model. You can do things like relaxation model subsystems based on a value entry or event within the model.
-
Currency of the line has changed since the user interface has been made on creating
Hi all
I'm ' currency of the line has changed since the user interface has been made. " The key to the planned line was oracle.jbo.Key' error on create action. Use case is simple. He saw table and create a button. When I click the Create button, I get this error. Back button of the browser is never used.
The strange thing is that I don't get this error when I run my application on your premises. However, after I had it deployed in real development environment, he started up this error and I do not get this error on other pages.
JDeveloper Version: 11.1.2.2.0 (JSF 2.0)
Weblogic Version development environment: 11.1.1.6
Kind regards
AnilSame question: do you have the correct version of the runtime ADF your server?
Timo
-
I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.
Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?
-
just upgraded to Imac 27 "5K, installed the Software Photoshop cs4, then saving files get 'could not save file currently in use or is still open' how can I remedy?
Check this message: Re: "cannot save (file name) because the file is already in use or left pending."
-
I use microsoft Windows xpsp3 teacher that my question is wn I install winxp after 6 months that my hardware (motherboard) will be too bad so I'll be changed motherboard so I can use my OS still this material, I've heard could not appu .so wy use winxp.so me.pls help
You can reuse your current XP only if the version is not OEM. OEM is a version that must be supported directly by the manufacturer of the computer first. OEM is always linked to the first PC, the license is activated on. This license is suppused to 'die' with the PC. Now, there is a "grey area" on the definition of a PC, but accepted the more common definition all came to the conclusion that the 'mother' is the building block for the definition. Therefore, change of motherboards would mean you have a "new" PC
-
When I opened TB, I don't see no information on the TB account that I used for years. Instead, the main menu shows only 'accounts'-'Create a new account - Email, Chat, newsgroup, feed'. Option: "view settings for this account" does NOT appear.
Also the main menu does NOT appear "Email - messages, write a new Message" or "Advanced functions", etc...
Real emails regarding the TB account I used for years are still present in the "users-> xxxxyyyy-> AppData-> Roaming-> Thunderbird' folder."
http://KB.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared
-
Photos added in the download on my PC "iCloud Photos" folder do not appear in iCloud. In addition, iCloud library box get unchecked by itself after a minute. I had already added a subdirectory with images in the "Uploads" directory that uses 54 MB and I don't see them going to the cloud.
The problem disappeared after restarting my PC. Thanks to the support of Apple make this stage of growth of fundamental problems.
-
STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.
Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please
Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.
Solution:
1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.
2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)
3. type: BATCH spuninst.txt
4. type: exit
Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.
-Tom Steele
http://www.hawkandtom.com Tom Steele -
I installed "downloadhelper". It shows in the list of add-ons/extensions, but it does not appear in the toolbar. I reinstalled foxfire, various foxfire files updated, tried other modules, but none of this helps.
Have you tried to click on "Restore default settings" in the palette to customize?
Have you checked the settings in the VDH extension?
-
The model Interface Toolkit does support the cRIO-9068 again based on Linux?
Hello, I have a cRIO-9068 and need to integrate a Simulink model in my controller. The model Interface Toolkit does support the cRIO-9068 again based on Linux? Besides, don't Veristand? This page assumes that it is not:
http://digital.NI.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751
Thank you
Hi Southern_Cross,
Based on the readme:
http://digital.NI.com/public.nsf/allkb/D3F40C101B66128186257D020049D679
It seems that it is now supported! These resources should provide a few more details:
http://zone.NI.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/
http://digital.NI.com/public.nsf/allkb/E552B0CD4E48215586257DF7005BE055
Please note that NI VeriStand 2014 can't stand it targets NOR Linux in real time.
Kind regards
-
No idea why the latest update of security for WindowsXP (KB2686509) install not on my computer? Have tried many times, keeps on coming it was not installed.
See the RESPONSE of two 2 messages in this thread-online http://answers.microsoft.com/thread/0deeacb6-115c-419d-ac37-03ff8927b79c
Tip: Start with Christian script execution.
-
Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.
Hello
Try this:
http://support.Microsoft.com/kb/306318
b Eddie
Maybe you are looking for
-
T is possible to burn discs double layer in Satellite M30X 124 model
-
What HARD drive max can I use for Satellite 2410-504
Hello I have a Toshiba 2410-504 P241E the 20 GB drive HARD is almost full, and I would like to buy another larger capacity disc to replace.My question is what is the maximum capacity disc and what type of drive this machine will support? Note: I have
-
I have an iPhone 5 s, which is currently covered by Apple Care. I dropped the phone to the point where it is irreparable (catastrophic damage, came wide screen) What are my options to get a replacement? I was told to buy Apple care (extended warranty
-
Re: Satellite A500 - 1 H 4 memory upgrade: what characteristics?
Hello I own a Toshiba Satellite A500 - 1 H 4, and I would like to improve my memory of 4 & 2 GB 4 & 4 installation.Given the complexity of the subject, I need some information: -What are the detailed specifications? Memory of 1066 or 1333 MHz? Should
-
When I double click on an image in the folder my pictures, it opens using Microsoft Photo edit. How to open with Windows Picture and Fax Viewer?