Changes made to the screw driver in the Interface of Simulation Toolkit (SIT) are not translated

Hello

I use Simulation Interface Toolkit to target a controller built in Simulink on a PXI target. I used the SIT connection manager to generate the driver screws I had to make some changes in the screw driver specifically Read.vi IO. I made the changes and the entire application runs without error. But the changes are not getting in the functioning of the application, essentially when I load the thing on PXI and run it, it contains exactly as it was before behaiving I made these changes. Some how the changes I make to the Read.vi of e/s are not begin day somewhere in the top vi driver.

Could someone help me with this please.

Eliane.

Hi Bill,

Thank you very much for looking into this. Solved the problem.

The problem was that whenever it makes a change one driver that saw VI top-level driver must be opened and saved again. This opening and registration links the pilot with new changed correctly VI and then everything works fine.

Thanks again.

Eliane.

Tags: NI Software

Similar Questions

  • Uninstall/Change programs, all the programs installed on my system are not visible

    Uninstall/Change programs, all the programs installed on my system are not visible.

    That's why I not able to uninstall some programs.

    help out me.

    Avast has a removal utility completely on their website for download.

    You can also try the free trial of http://www.revouninstaller.com/

  • Anti-phishing/malware blocking is enabled, but the test of Firefox phishing sites are not blocked.

    I went to Tools-Options-Security and made sure all reported attack/block fake websites have been checked. I went to the sites of phishing/malware test on this page: http://www.mozilla.org/en-US/firefox/phishing-protection/

    Both sites loading even if the assignment of security options, they should not have. I tried to restart my computer and Firefox, the problem persists.

    Sorry, never mind, problem solved.

    Discussed in this post: https://support.mozilla.org/en-US/questions/911396#answer-297537

  • JAR: Changes made to the file packaged AP Project_1007.ini require restarting services by BDUS to enter into force?

    Hello

    I have a small doubt regarding the changes made on the packaged AP Project_1007.ini AP Imaging project file.

    I have a supplier search button in my auditor and I must make a few changes to the application of it. This provider search query is defined in section search provider OFR the AP packaged Project_1007.ini file.

    I added my additional condition in the where clause of the query to extract from sellers. But when I check in the WebVerifier, I don't see reflected.

    So in general, any changes made to packaged AP Project_1007.ini requires a restart of the services/auditor of WFR etc. of have reflected them?

    Let me know if I am not clear with my question.

    Kind regards

    Srikanth R

    Usually just stop and start the console RTS toured, but sometimes you need to restart the icons green funnel management service. A script is maintained in the project, no not the ini file, you must make sure that you save the project after adding or editing a script in designer of as it warns you not save changes

  • How to see changes made to the file in Oracle EBS on browser

    Hello

    When I change any file such as Javascript or Base.htm or all the files on the EBS server and it does not reflect on browser until then I restart the server of the EBS. After restarting the server, it reflects the browser but the EBS server restart is not so easy. It takes more time to restart.

    If anyone knows another way to see the changes made to the file on the browser, then please reply to this post.

    Thank you very much

    Othmane

    Othmane,

    Take a look at the link below. It answers your question.

    http://www.appsdba.info/docs/oracle_apps/R12/HowToUpdateJavaCodeClass.PDF

    See also:

    Welcome to my Blogspot Oracle: Bounce Apache Server - Oracle Apps R12

    See you soon

    AJ

  • How to merge the changes made to the same analysis?

    Hello

    I have an analysis and there are two issues raised against it, in a real environment.

    In development, the problems starts at the same time. However, only the first resolution should be tested. Assuming that the first problem is solved, how can I "apply" the changes made to the second issue fixed / fixed?

    What are the means and best practices in this situation? OBIEE version is 11.1.1.7.0.

    Thank you.

    Kind regards

    Maury.

    You can use a text editor such as Notepad ++ and the plugin in comparison to compare the XML from the analyses and differences in merger.  That would be the fastest easy/more...

    Just a word of warning - this is completely not supported by Oracle and can VERY easily lead to a corrupted analysis. You'll find plenty of OBIEE'ers experienced out there who have hacked the XML on analysis, but you have also messed up in the process. Always make sure you have a backup and Don ' t cry about it if it breaks.

    To the OP - I don't think that there is a good answer to this problem. The analyses are simple objects, there is no option of merger for them.

  • Tracking of changes made by the customer?

    Is there a way to track the changes made by the receiver/writer on some fields in a form? I need some fields to be open to both the sender and the signatory, but need a way to indicate if one of these fields have been modified by the signatory prior to approval.

    Anyone know of a way to do this?

    Thank you all.

    Red Hello,

    By default, a field can be assigned to anyone as well but if it's full of any beneficiary, then it becomes read-only and cannot be modified by the other beneficiaries involved in the transaction.

    Kind regards

    -Usman

  • Why Adobe Muse is stuck while trying to merge changes made in the browser edition?

    My client contacted me this morning to let me know that one of his pages on its website was down and that it is urgent that it gets fixed. I immediately tried to open the Muse to merge the changes and re - upload the files. I did not work. Muse is stuck in the fusion of customer changes made in the browser edition. So, I called Adobe and have just spent two hours on the phone with a representative of Adobe Muse trying to solve the problem. It reaches point merger/day 2/3 of the files then crashes. The representative asked me to update to Muse that I did and again tried to merge the changes, and it did not work. Then, the representative asked me to change the Preferences of Muse folder in the library of 'old' then I was instructed to uninstall Muse and re - install on my computer. I did it. It still does not. Then the representative asked me to create a new user on my computer. What? Which makes no sense at all. When I asked to speak to the level 3 technical support, I was told that no one was available, but that she would have a supervisor call me back in a few minutes. I'm still waiting for a callback.

    For my client's site is not down, I decided with the permission of my client to not merge the changes she made and simply re - download the file I recorded previously.

    Can you get it someone please let me know how to solve the problem with ability to Muse to merge updates so that the next time this happens, I'm not wasting two hours on the phone and still not return the right answer or a call from Adobe? Gets a little frustrated by the lack of product support. Thank you.

    Hello Andrea,

    First of all, I apologize for bad support experience you had. I forwarded this thread on the support Manager to take a look.

    It sounds like you hit a bug we have heard reports of the but have not yet isolated, when merging text. There are probably setting a text which, when trying to merge, plant Muse. Until fix us the bug, the best work around is to find this block of text (usually by clicking on merge on each change until it crashes in the Muse, sorry), restart Muse and then jump merger than one change. Afterwords, re-do the changes as part of this text by hand. I know this isn't a great work autour, but it should at least get you operational return.

    Best,

    Sam

  • Changes made to the database

    Hi friends,

    How to find changes made to the last the two level database and the physical object? (without going for logminer or audit). Please suggest me.

    Thank you
    KSG

    As... How findout what are the procedures/tables/views (added /deleted/ modified), tablespace/data files (added/removed) to a particular database the previous day? *(without Going for Analysing LogMiner, or Auditing) *. Please suggest other is possible to find it?

    procedures/tables/views (added modified /deleted/) - ONLY by views

    have a look at http://vsbabu.org/oracle/sect06.html

    or

    Select * from dba_objects where LAST_DDL_TIME > SYSDATE - 7;

    to add/remove data files, check the file path of the controlfile

    Thank you

  • How to get changes made to the TLF text

    Hello

    Is there a way to TLF to get the number of changes made to the TLF text? Like if I applied underscore of a text or changed the font size, etc.

    Can I get these changes made to the text?

    As whenever I do an operation, can I keep the operation whenever an operation is complete.

    UndoManager can undo changes through the EditManager, but not the changes directly to the TextFlow. Similarly, we do operations and send messages of operation for the things happening across the EditManager. I would say that if you want to remove the terminal node, you can remove it by getting his range of text and remove it through the EditManager. Then, the change would be infeasible. Try something like this:

    editManager.deleteText (new SelectionState (textFlow, leaf.getAbsoluteStart (), leaf.getAbsoluteStart () + leaf.textLength));

    -robin

  • changes made to the code do not appear in the file swf, even trace instructions not.

    I just picked up a clients flex project and I can't get the app to reflect even a simple statement trace.

    Before that I took over, the project was built last successfully with the environment/sdk Flash Builder Beta 2. I have the latest version of Flash Builder 4.

    To import the project into FB4, I get a ton of errors.  Most of them, mainly because of changes made to the beta2 sdk for free.

    Some of the things that I fixed:

    -mx to library://ns.adobe.com/flex/mx library://ns.adobe.com/flex/halo namespace

    -player video count: many names of the State for the video player component had been changed, more correctly States had been added.  There are also other related component video and property names that needed to be updated.

    But I have corrected this and the application is finally able to compile (but with a few caveats the type of variable in double especially)

    The only thing is now that any change I make to the project is not reflected in the build (debug or release).  I have changed the existing traces, added additional traces. Nothing is displayed.  I even removed the applicationComplete property in the main.mxml.  Still, everything worked as nothing has changed.

    Also I can't debug the application.  Whenever I try to debug... Flash builder said... "Swf application contains no debug information required...". "

    Anyone has any idea how to even begin to tackle this? Any help or pointers would be greatly appreciated.

    Hello

    Have you tried to project-> 'clean' the project?

    Also, instead of wasting more time with the import, I try and create a new project in FB 4 and copy all the code sorce and assets in the new project. Flex 2 has been a long time ago.

    Mike

  • Most of the sites are not loading on all browsers

    Hello

    2 weeks ago my MacBook Pro was working fine and I used it on the internet using an Ethernet cable for the 1st time. Then I had to travel and come back 2 days without it. When I tried to use it via my WiFi router, I realized that most of the sites are not loading on safari, chrome, firefox, etc. Only Youtube, Facebook, Twitter, Apple.com, Google and Yahoo are working. When I try other websites I get messages such as;

    Unable to connect

    Firefox can't establish a connection to the server www.google.com.

    The site may be temporarily unavailable or too busy. Try again in a few moments.

    If you are unable to load any pages, check your computer's network connection.

    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.


    and


    Safari cannot connect to the server.

    Other applications using internet work very well. My router is also OK. When I use the laptop mode safe mode everything works fine and I can access the sites but I need my machine in its maximum capacity.

    Please help me, I would greatly appreciate it

    Thank you

    This is probably a problem with Server DNS (Domain Name). If you enter anything in the DNS domains for your Wi - Fi configuration, it rolls too the parameters provided by your router.

    The best way to dig you out of ANY configuration problem, is to set up again from scratch, using:

    System Preferences > network > Wi - Fi > (help me) > (Assistant)...

    Be sure to specify a set of 'Place' new, mnemonic name, NOT the default. After answering questions, don't forget to click (apply) and close the window to have the changes take effect. Now, this set of parameters can be applied "all at once" when you're back at this place.

    When, in another location, create a new package from 'Rental' from scratch, so as not to crush those who work somewhere else.

  • sides of my layout of the Web site are not aligned correctly - view this thread for a much better understanding!

    The sides of my layout of the Web site are not aligned correctly, and the image is slightly moved above.

    To much better understand what I mean... First discovered my site here: http://www.clanmog.hostei.com/ - I noticed that this problem only occurs in Firefox (to my knowledge) and not Internet Explorer. It does not have this in IE, but Firefox does.

    then look at this image: http://img261.imageshack.us/img261/7210/helpme.PNG

    How can I solve this problem?

    At a glance I'd say it's because you are clearing out the average divs, but not others. This changes the alignment calculations...

    Mylenium

  • icons on the toolbar (Messaging, quickfilter etc.) are not in color

    Mozilla Thunderbird, the toolbar icons are simply not in colour.

    The deletion is not red... they are all just... austere black.

    Color helps recognize that the function involved by the icon easier I think.
    But the belief is not the same as knowledge and I'm not a fundamentalist of the color.

    icons on the toolbar (Messaging, quickfilter etc.) are not in color

    I guess the color black and white icons of the toolbar is intentionally in the current default theme.
    You can search another theme.
    https://addons.Mozilla.org/en-us/Thunderbird/complete-themes/

  • I downloaded the update to FF twice, but the web sites are not displayed despite my being on the page. Also restarted.

    Web pages (I tried different web sites) are not displayed, but the line at the bottom of the screen indicates that I am indeed on the web site. Previously, before, I downloaded the version nerw of FF, display web pages seemed slow unless I'm assured by cursor was "large" of the space on the screen that displays the web page.

    I checked with another browser and websites I went to work and are displayed in the browser.


Maybe you are looking for

  • App notes like behavior of (very) slow

    Hello To take advantage of the new features in the Notes app, I migrated my Evernote notes to the native application of the OS X. I have about 1200 note with all kinds of information and attachments. After this procedure, I noticed a great reduction

  • HP 2000-2061TU: How can I upgrade my graphic card in my laptop and my model number is hp 2000-2061TU

    How can I update my graphic card in my laptop? and my model number is hp 2000-2061TU Please help me...

  • config dll

    I have configured the dll, but it does not work. What will be the name of the function. I did the dll of the whole project, then it will give for function name

  • Scamming phone calls

    I recently received a phone call from someone who said they were by Microsoft and that my computer was in danger from malicious software, etc.  He stressed that he had nothing to do with viruses, etc..   He asked me to connect to my computer and then

  • Impossible to enter safe mode get code error 0x0000007b

    I am trying to load my computer in safe mode with networking, but I get the blue screen with an error message with a code (0x0000007B) and there are other codes behide it. Can someone tell me what this means?