Changing resolution of 7 Media Center "will not stick.

Similar Questions

• Media Center will not register a particular channel, but all other records very well

  Hello, I can not Media Center to record a particular channel unless I am diverted listed steps below.  I get all the live channels.

  -the channel, I can't save is 30.1 in Memphis, TN (subsidiary CW) channel

  -My tuner: AVerMedia AVerMedia Duet - PCTV Tuner (A188 - white box) Interface PCI-Express x 1 MTVHDDUWB

  When I try to record a program at any time on channel 30, Media Center loses signal.

  While playing with it, I discovered that I can click to save while watching channel 30, then after that Media Center loses signal, follow these steps:

  Reach

  Settings/TV/TV Signal / Scan for multiple channels

  So, I have to empty the scanned channels and re-scan.

  Then it will start to record the channel 30.1.

  Help, please!  Why Media Center will not record 30.1 without all this trouble?

  Thank you

  Kris

  Go to settings-guide-add missing channels. Type in right channel # (like 8.1). Then put in the right frequency for the over-the-air station (35 in my case). You can find this info here (http://www.antennaweb.org/aw/welcome.aspx) if necessary. Now, you will have 2 channels in guide for 8.1 lists. Right-click on the new guide that lists you just create and go change the channel-edit lists. Change the source from the list to the channel that you have problems with. Next pass parameter-signal digital tv signal strength and a Coachman television that did not properly record to remove the Guide channel. This will fix your problem.

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• Window Media Center will not configure my Xbox says that there is an error in moan by train

  Window Media Center will not configure my Xbox says that there is an error in moan by train

  Hello

  What is you get the exact error message?

  Please follow the steps mentioned in the links below.

  Set up a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  You tried to set up your console Xbox 360 as a Media Center Extender, but the installer is not started

  http://support.Microsoft.com/kb/916180

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Media-Center-FAQ

• Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

  Windows vista Media Center will not download the latest options for my region.  It is under the TV signal, TV download

  configuration options.  When I finally get through all the steps I get only 1 station with a signal strong enough.  I was able to get much more than that in the past.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

   

  Check if that helps.

• Windows Media Center will not stop to come when I click on my user name

  Windows Media Center will not stop when I click on my username to come...

  Hello
  Try to create a new user account and transfer the files from the user account damaged to the new user account
   
  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile

• Windows Media Center - I get an error message indicating that Windows Media Center will not open

  Hello

  Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance

  Robert,
  Thanks for reporting the good news. Enjoy!
   
  Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:
   
  >
  >
  > Hi Barb,
  >
  > Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.
  >
  > Cordially.
  >
  > Robert.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Windows Media Center will not work

  Windows Media Center will not run.
  Using Windows 8.0 Pro with Media Center
  Version: 6.2.9200

  Application error:
  Name of the failing application: ehshell.exe, version: 6.2.9200.16384, time stamp: 0x50109c45
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
  Exception code: 0xe0434352
  Offset: 0x0000000000047b8c
  ID of the process failed: 0 x 318
  Start time of application vulnerabilities: 0x01d041a3b75a3eb4
  The failing application path: C:\Windows\ehome\ehshell.exe
  Path of the failing module: C:\Windows\system32\KERNELBASE.dll
  Report ID: f6eacea1-ad96-11e4-be9e-681729142589
  Faulting full name of the package:
  ID of the failed package-parent application:

  .NET runtime:
  Application: ehshell.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception details: System.InvalidOperationException
  Battery:
  at Microsoft.MediaCenter.Store.ObjectStore.Open (System.String, System.String, System.String, System.Reflection.Assembly, Boolean)
  at Microsoft.MediaCenter.Store.ObjectStore.Open (System.String, System.String, System.String, Boolean)
  at Microsoft.MediaCenter.Store.ObjectStore.AddObjectStoreReference)
  at Microsoft.MediaCenter.Store.ObjectStore.get_DefaultSingleton)
  at ServiceBus.UIFramework.UserControlPoint.Launch (System.String)

  Support Microsoft Search, community and Internet research and

  Tried the following with no results:
  -System restore
  SFC/scannow (no error)
  -Enable Windows features and disable.
  -WMC disabled WMC, restart, turned his back on back
  -Turned .net framework, stop, reboot, turned their backs
  -Re-record files associated with Windows Media center.
  -regsvr32 jscript.dll
  -regsvr32 vbscript.dll
  -Troubleshooting
  -Windows Media Player DVD - No problem
  -Windows Media Player Library-corrupt-fixed
  -Windows Media Player settings-fixed
  -Rebuild the Media Center data store.
  -%SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB (the file does not exist)
  -Ran as administrator

  This error points to the mcstoredb.dll which can indicate a corruption of the data bank:

  GIS [3]. Name = Signature of the 04 problem
  GIS [3]. Value =mcstoredb

  Try the following method 2 in the MS article to rename the mcepg2 - 0.db and other file with extension .db in the folder C:\ProgramData\Microsoft\eHome to rebuild the Media Center data store.

  http://support.Microsoft.com/kb/2400410/

  Article is for Windows 7, but should also work for Windows 8.

  You may have to restart the computer later,

• PlayReady in Media Center will not update.

  PlayReady in Media Center will not update.  The message is "PlayReady update was incomplete.  "You can watch or save protected content until the update is successful.  All attempts to return the same error.  Netflix also only a black screen shows when you watch a movie.  Live TV works except HBO which is protected against copying.  How can I fix?

  Hi William,.

  Thanks for posting your query in the Microsoft Community Forums.

  From the problem description, I understand that you have problems with the PlayReady Media Center update on Windows 8 computers. I will certainly help you in this regard.

  Try these methods and see if it makes a difference.

  Method 1
  Loan will not update if the date is wrong. I suggest you to check if the system date and time is correct.

  Method 2
  Temporarily disable your firewall settings and check if you are able to update.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  
  Method 3

  Open Windows "Services" via the Control Panel > Administrative Tools > Services.
  With Media Center open and show "the PlayReady update was incomplete. Do you want to retry? "Go to the 'Services' Panel you just opened and scroll all the way up to"Services Windows Media Center Receiver", double-click it, then click on"Stop ".

  Navigate to the folder ReadyPlay HIDDEN (C:\ProgramData\Microsoft\PlayReady), and then delete the mspr.hds file.

  Return to the OPEN & CONTINUES, Media Center and click 'Yes' and 'Next' to the question of the PlayReady update. He should immediately zip past and say update complete & you can watch and record the protected against copying.

  Carry out these methods and let us know if you need more assistance. I'll be happy to help you.

• Cannot play online games and Media Center will not work.

  Original title: can't play games online

  I have internet explorer 9 and adobe flashplayer 11 but used to my computer let me play games on the internet, my I player and other television channels, even my media Center do not work. They keep stopping and starting or won't work.  What is java? and should I install on my computer. Any help would be greatly appreciated.

  Hello

  1. is the specific question of part or all of the games on the internet?

  2. what happens when you play videos on Windows Media Center? You get the error message? If so, what is the full message?

  3. have you done any software or hardware changes on your computer before this problem?

  Method 1:

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  For more information on Java, see the above link.

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/why-Don

  Warning to reset Internet Explorer:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Method 2:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833

  Method 3:

  Problem with Windows Media Center, refer to this method.

  You can try to reset Windows Media Center, see these steps.

  (a) click Start

  (b) open the Control Panel, then programs and features.

  (c) click on ""turn Windows features on or off ' in the left pane. "

  (d) develop "multimedia functions", uncheck "Windows Media Center". Click 'Yes' to continue and click OK to exit.

  (e) and then restart the computer.

  Once the computer is restarted, perform the following steps.

  (f) open 'Windows turn features on or off' again. Enable features. "Windows Media Center". Restart the computer.

  (g) launch Windows Media Center, initialize the program.

  Check if the problem persists.

  Further, I suggest that you open the display of the event logs and are looking for complete errors when Windows Media Center is unable to start.

  Reference: Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  See also: What are the information contained in the logs of the event (Event Viewer)? http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-event-viewer

  Hope the information is useful.

• Windows Media Center will not show images

  My windows media game will not display images in the library.  They appear as being there but have no photo attached.   If I open them it says "cannot display the image.

  Videos seem to work very well.

  Help, please.

  Hi sjeri,

  If you want thumbnails to display in your library, you can do the following:

  1. click on the "Start" button, type options files and click on the link 'Options folders' that appears.

  2. when several tabs 'Folder Options' dialog box is displayed, click the "View" tab

  3 always check "show icons, never thumbnails" to disable the generation of thumbnails. Clear this check box to enable the generation of thumbnails.

  4. click 'OK' to close the dialog box.

  Please check if you get a symbol of locking for images icons in windows Explorer.

  You can also visit the link below:

  Change the thumbnail size details and file

  http://Windows.Microsoft.com/en-us/Windows7/change-thumbnail-size-and-file-details

  Hope this information is useful.

  Please let us know if you need further assistance.

  Concerning

  Rehman - Microsoft Support

• Windows Media Center will not scan digital channels using a dual tuner (analog/digital)

  I have an AverMedia Volar Max tuner which is analog and digital double Windows 7 Professional
  Media Library 'sees' the tuner as an analog tuner and properly identifies all the analog channels, that I see on TV.
  However, none of the digital channels are detected. I have not found a way to "force" a search using QAM256 or any other research of digital formats.   Using the tuner, cable and connections the same BUT with a linux sotware (mythtv) all digital channels have been identified.
  Is the problem because its analog and digital modes? How can I force Media Center to see the digital capacity of the tuner?

  Might have been a better place to look for information on the AverMedia Max Volar tuner AverMedia USA site.

  If you had looked here to find the latest drivers or to read support information, you would have found:

  The support of the AVerTV Hybrid Volar MAX QAM signals on Microsoft Windows Media Center?

  Currently, Microsoft Windows Media Center does not signal QAM. You will need to use our AVer Media Center in order to receive the QAM signal. Please download the application on our website programs: http://www.aver.com/mpd/support/download/combopcie.html

• Windows Media Center will not load DVD

  To the right;

  The Windows Media Center does not load DVD. Please notify.

  Thanks in advance,

  Ted Chalkidis

  To the right;

  The Windows Media Center does not load DVD. Please notify.

  Thanks in advance,

  Ted Chalkidis

  What happens if you try the same outside Media Center?

• Media Center: Will not add folders to the library

  For about a week now through yesterday morning, I had several video files put in place in Media Center: specifically, two folders on local and network disks several (five or six) on records.

  Last night, I went to the video library in Media Center, and it was completely empty. Records and all video files are always accessible through the browser and the network as needed, so I go to Media Center and re-add the same folders. Return to the video library. It is empty. I will go back to the library settings and all defined records are previously selected is no longer! So I go through and add them back. Only to make them all disappear.

  I do this several times, including the second to the last test where I waited in circles and looked at the gauge progress and a total number of 300 + video files displayed. But the library is still empty and not setup all files as added!

  So my last try: I remove all other music and image files and add just a video file. And still no videos!

  I already rebooted once and now I am at a complete loss as to what could be the problem. The files are a mix of .avi (xvid, for the most part), .mkv and .ts who worked before this question last night.

  I said that I should leave the Media Centre, stop the windows media player network service, and then remove windows media player db file. I did all this, restarted the service and then media center, added a video file and guess what? Still no file (or folder) in my Media Center video library.

  What is happening here!

  Edited to add:

  Well, I did a few experiences more.

  In Windows Media PLAYER, I wasn't able to add folder to library video (via organize) it is. However, I was able to add folders to the library in Windows Explorer. I could then drag and drop the Windows Explorer video library in WMP. However, none of this has changed the fact that the video library in Media Center remains empty and I can not add ALL the video files via the parameters.

  In the meantime, I have two choices, I can browse my multimedia files via WMP which is not half bad but I prefer reading via Media Center. so... currently, I navigate through Explorer Windows and Media Center set as default player for all types of video file in the video library of the Explorer.

  However, I would really like this work all through (some) Media Center :)

  I wonder if there might be a corruption of the current library which is not resolved by simply removing the CurrentDatabase_ # .wmdb as suggested earlier.  You see the question even if you plan to display this content in Windows Media Player as well?  If so, in Windows 7, there is an option to rebuild the library.  This is done through Windows Media Player tools > advanced > restore library... menu (an open area along the top or bottom of the drive to find this right click menu).

  Thank you

  Chad

• Windows Media Center will not record shows?

  I just brought a new model of the series Gateway ZRX 6971, with touch screen

  I have upgraded to Windows 8 Pro

  Get the free download for Windows Media Center

  Previously recorded shows that has been saved so I still had Windows 7 has played without problems in Windows 8

  However, it won't save poster now because I have "insufficient disk space".

  But I have over 900 GB of free space!

  I tried to tweak the settings in the settings options and even tried to disable recording of HD!

  Still no luck!  Help!

  See my post "Windows 8 - record TV with Windows Media Center problem"

  The answer to my problem is in the penultimate position...

  I managed to solve it now by running a recovery job in the computer management application.

  In case anyone else has this problem, here's what I did:

  1. close Windows Media Center

  2. open the computer management application and navigate to the bottom of the tree in the left panel by selecting system tools-> Task Scheduler-> Task Scheduler Library-> Microsoft-> Windows-> Media Center

  3. at the top, the central panel find the "MediaCenterRecoveryTask" task, which should have a status of "Ready".  Right-click on the task and select run (status changes to "Running")

  4 wait for the task to do his stuff (the status does not change) then right click on the task again and select end (State dates back to "Ready")

  5. open Windows Media Center, which will realize that there is a problem and that it is necessary to rerun the configuration

  After the execution of the task above and completing a successful installer of Windows Media Center, I found I could record once more tv!

  Guess I'll never know exactly what was wrong, but I'll settle for having working again!

  Hope that works for you