changing the computer name root

Similar Questions

• Change the computer name in the network discovery, view old and new names and get error code 0 x 80070035

  I changed the computer names of computers each with windows 7 and a home network sharing. Network discovered each poster now the old and new names. I also have an error code 0 x 80070035.

  How can I get rid of the old names?

  Hello

  Are you able to access computers using the names?

  Step 1: Check out the link to learn how to delete the old name and create a new name:

  Change the name of your computer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-computer-name

  Step 2: Refer to the section below for more information to correct the error 0 x 80070035 and steps.

  Open the homegroup troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Error 0 x 80070035 appears if you are not able to access the network computer. Follow the instructions in the thread below if you are faced with a similar question:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-error-0x80070035-when-trying-to-share/d8168c72-D51C-41C3-8B8F-3b6bb7f65f43

  It will be useful.

• Want to change the computer name of PC/crumbs to PC/CrystalDawn without reformatting or open new account

  Hi all!

  I hope someone can help me with this; I'm trying to change my computer name of PC/crumbs to PC/CrystalDawn without having to reformat or open a new account CrystalDawn and manually migrate thousands of items saved so far, as suggested by another user in this Forums MS 2009 post on my computer:

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/88d24e9-C944-4DC8-86cd-6057ccfc04a2

  It seems a little silly that I have to go through so much trouble to make such a minor change and back.  If someone could explain if and why it must be so annoyingly difficult just make this small change, perhaps understanding would help me decide if I would go through with the whole rigamarole if it is really necessary.

  I guess my other question will be, is it really necessary?  The people at the other end of files displayed in a portal online or any other place see the ' PC/crumbs' or 'Documents/Crumbs/filename.doc' or do they see just "door"?  I'll keep it like that if it's only visible as of the crumbs in my computer, but since I work online and send files of professional document a lot, a lot, I certainly don't want will be called "crumbs".

  Any help would be appreciated because I don't have the $60,00 by every 10 minutes if I had to call Microsoft itself.

  See you soon! ~ AwmostDone

  If you want to rename your computer, here's how: http://www.ehow.com/how_5124750_change-computer-name-vista.html

  However, I think you mean you want to rename your account. You can do, but the record of account will be always called crumbs here:C:\Users and everything related to saving the files. The files will always be completely when you put them and nothing's wrong turn.

  If you download the file to a service such as skydrive, the file is stored on the server of the site and has nothing to do with your computer more (so they'll just see).

  I know it's annoying that you cannot rename the folder of the user himself. Maybe they'll fix it someday...

  teengeek.freehostingcloud.com Microsoft community contributor

• How to change the computer name of existing desktop computers linked clone pool?

  Hello

  I'm curious about something that has developed in our Organization.  New guidelines came down and we have to change the name of the computer for all of our offices to meet the new criteria.

  I have many of our users is on the offices of Linked-Clone (automated pool, dedicated, assignment see 5.1) which will have their names have been changed.  I use a 'model' for the name of the computer.

  I tried this before by simply change the settings of the pool, and then recompose the pool.  Recompose worked well, but NONE of the virtual machine names have been changed.  All machines, recomposed just fine, but keep the old name of the computer (non-compliant).

  How can I change the name of the computer of my clone in an existing pool offices?  Maybe I have something wrong.  I'm doing it instead of having to create a new pool and move the persistent disks.  I would like to change the name in the settings of the pool and recompose, but it did not work.

  Scenario:
  See 5.1

  Automated cloning related pool

  Assignment of dedicated (persistent disks)

  Thanks in advance

  It is not possible to change the name of existing workstations by modifying the settings of the pool. There is no way to make this happen automatically and in doing so manually would not seen happy.

  Unfortunately, for dedicated pools, you will have more work to do. If you do not use Persona you detach the persistent disks and recreate virtual machines in the pool with this disk to create a new virtual machine with a new name to be generated.

  If you use Persona you could remove all virtual machines and have Persona to extract profile data down to the virtual machine that would be entitled to the user when they connect then. This will cause all user installed programs go, but I hope that's not common if you are already using linked clones.

  I encourage to go to the next page, click on the feature request form link and publish information on what you're trying to do:

  https://www.VMware.com/support/policies/feature.html

  Notifications about features are reviewed by VMware and if you can get enough of your friends/colleagues notice to users to ask something often a solution will grow in any kind, nature or form.

  Hope this helps.

  -Mike

• stop the warning to change the host name

  I continue to be careful:

  Your computer name is already in use on this network. the name has been changed...

  I click ok and keeps coming back with many more and will not stop!

  Thank you

  This is the share name that is duplicated on another device on the network, or the name of VICTORIES under the Ethernet settings. Both are in system preferences.

  Under network, click the network connection you are using (wired or wireless). Click the Advanced button, then the WINS tab change the NetBIOS name to something else. Click OK. If it is active, click on the button apply.

  If that doesn't help, click on the share icon. Change the computer name to something else. This is necessary, or even do anything if at least one of the options of sharing is checked.

• change the original name of my computer results so the original name first to get my computer completely disappears

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://www.howtogeek.com/HOWTO/Windows-Vista/change-your-computer-name-in-Windows-Vista/

  http://www.Vistax64.com/tutorials/122011-user-account-name.html

  Read the above info and 'related links' to Vista64.com.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I change the default name of my computer?

  When I bought my computer, my daughter set up for me as a surprise for me when I arrived home from work, my computer would be in place and running and it was... However, she named my system with my name and my ex-boyfriend!  I can't understand how to change it!  I don't want to connect and see his name given so that mine to 'MY' computer!  Please help me change that... I was pulling my hair out trying to figure it out for about a year now!  Lady in distress... lol!  Thanks in advance!

  This should really be posted in
  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/threads or
  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/threads

  See "change the name of your computer.  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-computer-name Brian Tillman [MVP-Outlook]

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• How to change the SSID name of the computer to be Compatible with the new name SSID router

  Need to change the default name of the SSID router and then reconfigure adapters wireless in each PC to be compatible with the new router SSID.  A PC has Windows XP Home Edition Version 2002 Service Pack 3 and the other Vista Home Premium.  What are the steps to change the SSID on each PC?  Your response will help complete a home network wireless system.  Thanks in advance.

  Hello

  Your computers use the SSID of your router - sound essentially its name.

  Check this box:
   
  Setting up a wireless router with Vista
  http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

  If necessary:

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  Setting up a wireless router with Vista
  http://www.ehow.com/how-does_4899098_setting-up-wireless-router-Vista.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I change my computer name that a name appears to start and it is not one of my accounts that I have to delete out and put a real name, I'm working with windows xp

  I need to know how to change the name of the computer, so when I start at the top one of account names I installed will come

  Hello

  Welcome to the Microsoft Community Forums. According to the description of your problem, I understand that you want to change the name of the computer that appears at startup upward.

  Your computer is connected to the domain network?

  Method 1:

  I suggest you check out the link to change the name of the computer.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003.

  http://support.Microsoft.com/kb/295017

  Method 2:

  I suggest you to refer to a link to delete the user account.

  How to create and configure user accounts in Windows XP.

  http://support.Microsoft.com/kb/279783

   

  If the problem persists and if you have any problems related to Windows please answer we will be happy to help you.

  Thank you.

• Properties of the system; General tab. How can I change the registered name?

  I am the second owner of my computer and I would like to change the registered name to show my own.  How can I do this?

  It's Windows XP Edition SP3 addition family

  Saturday, July 17, 2010, 11:24:04 + 0000, Dawgbrother wrote:

  I am the second owner of my computer and I would like to change the registered name to show my own.  How can I do this?

  It's Windows XP Edition SP3 addition family

  It is a Windows 7 forum, not a Windows XP forum. But since the same
  answer works for both versions of Windows, it's here:

  If I bought a used computer, no matter who previously owned, the first thing I have with it would be to reinstall the operating system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone of another errors and problems, possibility of kiddy p0rn, etc, and I would not recommend anyone else to do.
  But if you just want to change the name of "registered to", you can do
  editing HKLM\Software\Microsoft\Windows NT\Current
  Version\RegisteredOwner with Regedit.

  Ken Blake

• change the user name in Windows 7

  I upgraded from Vista to Win7 pro 64 64. "" My logon icon and the name is always ' Max 64 "Vista how to change name of ' Max win7 64"?

  Try this.  Click Start, right-click computer, and click Properties.  Scroll up to where it says "Settings of domain and workgroup of the computer" and click on change settings.  Then in the computer name tab, click on change.

  Good luck.

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• How to set the computer name and domain name

  I try to install R12.1.1 EBS on windows server 2003
  I'm in following the
  Thread: Oracle E-Business Suite R12 Installation on Windows 2003
  
  
  to write hswaan in step 2
  
  (2) set "ComputerName" and "Domain Name".
  
  How can I set the computer name and domain name in my windows 2003
  Please send me the steps to do
  
  respect of
  Noman

  Hello

  It is already mentioned in the same thread.

  -Right click on "My computer" > properties > "ComputerName" > change
  -The value "name of the computer.
  -Click on more
  -The value "This computer's primary DNS suffix"

  Steps for installing Oracle E-Business Suite R12 on Windows XP
  Steps for installing Oracle E-Business Suite R12 on Windows XP

  Kind regards
  Hussein

• TB change the sender name to my name to email classic. Fritz! Box send a pushmail with the name "Fritz!" Box '. In the Inbox of my ISP of this name is present. ...

  TB change the sender name to my name to email classic.
  Fritz! Box send a pushmail with the name of the sender "Fritz!" Box' to my standard email address.
  In the Inbox of my ISP of this name is present. Get this mail with TB the name "Fritz!" Box"is changed in lastname, firstname. This is the full name of my standard email address as I stated in my address book.

  In the toolbar > Options > view > advanced and turn off "see the show only the names of the people in my address book."