Changing the configuration of network domestic

I use an Apple Time Capsule as a router with no problems until now. The current configuration is essentially:

Cable modem

|

Time Capsule

|         \

|         Wireless

|

Hard line CAT 5 of various devices

We'll be moving soon however, and I want over the new House to have a network in the wall. I have the skills, tools and parts, my only question is whether to change my configuration will work with the configuration that I have in mind. I would like to change it to:

Unmanaged switch

(Cat 5)   /           |           -(Cat 5)

Cable modem |             Time Capsule

|                             \

CAT 5 in other rooms wireless

My apologies for the crude drawing/plan. Here are my questions: the TC can continue to manage the routing/DHCP for the network in this configuration? A switch works, or should I use a managed switch? Everything that handles routing/DHCP function should she go between the cable Modem and the rest of the network, or it will work at any layer as long as it is not competing with something else trying to do the same function?

Thanks in advance for any help.

I'm assuming that your cable modem is a simple modem... only a single Ethernet port on the device.

Your new network should look like this:

Internet connection > Cable modem > router (probably your Time Capsule) > switch > Ethernet devices

Reason... the cable modem can only provide a valid IP address.  If you have a switch connected to the cable modem... it will be a matter of chance as to which device will get the right IP address. All other devices won't be able to connect to the Internet.

A switch will be thin and easier to use than a managed switch.

Tags: Wireless

Similar Questions

  • Network Assistant unable to finish the configuration of network domestic

    I'm trying to set up a network using the wizard, whenever I try to use the created dsc (Firewall window files are corrupt and cannot reset) I use Win XP on all computers. Firewall off

    There is no need to use the created disc.  Run the Configuration Wizard from the network on each computer by clicking on its icon in Start > all programs > Accessories > Communications . Boulder computer Maven
    Most Microsoft Valuable Professional

  • Can not change the configuration extreme airport

    Hello everyone, the community can maybe help me.

    I am a long-time Apple guy and can usually solve my own problems, but this one left me speechless. I have an Airport Extreme ages of less than 1 year. I set up OK and used for the last year. Now, I want to change the configuration. Specifically I add a port to the front, but I also had this problem, try to change the MAC address access lists, changing the wireless channel, allowing access as a guest, and probably any other change in config I try.

    Anyway, once I made the change, not restarting airport but then it fails to return to the top. The yellow light comes on and sometimes the utility Airport told me that he was unable to update the config. In this State I have to pull the plug to restart and once I did, the airport is back re-run without the changes I had made.

    It doesn't matter if I use the Airport 6.3.6 on El Capitan utility or Airport utility on iOS 9.2. The result is always the same. No change, fails to return to the top.

    I did a soft reset a hard reset and a factory reset. I've reconfigured from scratch (several times) and still can't seem to take a successful configuration change. I'm at the end of the ideas. I plan to return it because it's the year is February 2, but I don't want to go through the hassle if I can fix it myself or if it is a known problem that will not change with a change of equipment.

    In any case, here is specific information on the version by any chance, anyone else had this problem or knows a fix:

    Airport Extreme 802.11ac (ME918LL/A)

    Mac OS X 10.11.2

    Airport Utility 6.3.6

    iOS 9.2

    The actual configuration is crucial here.

    We need to know what is the brand and model of the modem?

    Some cable modems are at the origin of the terrible problems... especially the SB series cable modem.

    We should also see some screenshots of your configuration... Summary tab and network...

    We can work from there.

  • New router - how to change the configuration?

    I installed a new router but don't have my installation CD for my printer Photosmart 4385.  How can I change the configuration of my network without the CD?   I downloaded the drivers and software site HPO installation, but when I ran the installer, it never asked anything on the network.

    When you start the software, make sure that the printer is not connected to your computer via USB.  Then it should ask if you want to create a USB installation or network.

    If this isn't the case, you downloaded the software "full"?  Do this.

  • When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings

    Hello

    When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings!

    (Note I recently installed DivX player / converter / movies.. .is this the cause?)

    Then... on desktop... .double click on Mozilla... .loads ok
    Open a new tab..it loads Bing! & I hate it!

    Ive tried;

    1.Tools - options - addons - extensions & plugins - cant see anything there?
    2. On the small address bar (top right) which allows search engines to be managed - all cleared down except google & yahoo
    3. Tools - tab mix plus options - New Tabs - Load on new tabs set to Home Page (doesnt let me change it - greyed out url (conduit.com - see 5 below)
    4. Tools - tab mix plus options - New Tabs - Load on new tabs set to new tab Page - displays the url below (5) but if I try to edit it reverts back every time
    5. If I enter "about:config" & then "browser.newtab.url" in the URL bar I get
    
    browser.newtab.url;http://search.conduit.com/?ctid=CT3321897&octid=EB_ORIGINAL_CTID&SearchSource=69&CUI=&SSPV=&Lay=1&UM=5&UP=SP88BDE404-3DB6-49C4-97F5-96A64775CC57
    
    - rightclick on the selection and type 'reset' IT WONT CHANGE
    
    please can you help me?
    

    Thank you

    Stuart

    I see no mention of the duct. com in your initial post. It is often a good indication that you will taken place unwanted software.

  • USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

    USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

    Once again... Thanks for the tips...

  • BES 5.0.3 api to change the configuration of account?

    Hello

    I want to temporarily disable the users to send and receive e-mail and messages on their devices.  What I've read, the way to do is to put "Redirect to BlackBerry" 'no' in the account configuration.  The problem I have is that I want to do from a Java application using the BES 5.0.3 Service Web interface and I can't find any way to do this.

    Can I retrieve the current value of the object AccountConfiguration and I see that it has a setter, but what is the method in the BWS interface I would use to change the configuration on the server?  If this is not yet supported, or I forgot something?

    Thank you.

    Hi and welcome to the forums!

    Currently, this feature is not supported. You can set e-mail filters or the folder redirection using BWS, but stop the flow of messages in total is not supported.

    Feel free to submit a request for this feature by using Issue Tracker (link in my signature). It is important when using file a new application to include a good deal.

    Kind regards

  • Oracle EBS: change the configuration of the new server

    Hello everyone.

    I'm newbie talk about administering Oracle EBS.

    This is the scenario:

    Oracle 11.1.0.7.0 database

    Oracle EBS 12.1.3

    The single node configuration: database of the layer and the application layer runs on the same server.

    OS: RHEL 5.7

    Virtual server.

    The IT guys have cloned the production server by using the virtual server administration software in order to create a new virtual server for development purposes. The production server has been cloned successfully, the new development server is a host name and IP address different of the production server.

    The head of the computer SCIENCE Department has asked me to work in the new development server. My goal is to change the configuration of the EBS:

    1. change the ORACLE_SID of the Oracle database.

    2. change the ORACLE_HOME of Oracle database and Applications: for example, current ORACLE_HOME is/U01/production and we need the ORACLE_HOME under/u01/development

    3. change the user and group of the owners of Oracle database and Applications directories: for example, current owner of the directories of Oracle database is oramgr user and need to change the owner of oradev user, same case for Applications: current owner of inventories of Applications is user applmgr and need to change the owner of appldev user.

    Of course, it is expected after making changes, the Oracle DB and Oracle Applications must be able to function normally, I want to use the scripts to start and stop oracle the bleachers.

    Is it possible to make the mentioned changes?

    Can you please guide me to do this?

    Thanks in advance guys!

    You will need to follow the steps of the R12 cloning MOS 406982.1 Doc - essentially you are going to use the current instance as the source and make a clone with all the necessary changes you listed, and then drop the source instance

  • My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I do my wo

    My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I make my Lightroom works properly again?

    I use Lightroom 6.4 on a Pc with Windows 10.

    Has disappeared? Try file-> open the new item, and then select each illustrated catalog until you find the catalog with your photos.

    If this does not work, please post a screenshot of the problem.

  • Need ip vm info to change the type of network adapter

    Hello

    I need to change the type of network adapter on the virtual machines, but to do this I will need to get all relevant intellectual property information. This is because the server returns to DHCP afer restart, after the change of the NIC with the command below. I've seen various commands, but the simplest works only with 32-bit powercli which I did not present (or what I want). Does anyone do this?

    Thank you

    Get - vm servername | get-networkadapter | set-networkadapter -type 'Vmxnet3' -confirm:$false

    PowerGui FAQ.

    Q: how to start the administration Console in 32-bit mode on a 64 bit system?

    When you first install PowerGUI, on the last page of the installation there is an option to open the administration Console.  This option will open the default version of the administration Console.  The default version is 64-bit on 64-bit computers, or the 32-bit version on 32-bit computers.  Actually, on computers 32 bit, there is only one version, 32-bit version.  The PowerPacks to use a feature that is only available in mode 32 bits, so you can open the administration Console in this mode to use these PowerPacks.  To do this, you have a few options:

    1. from the start menu, open the programs PowerGUI, then x 86 folders and click the shortcut of PowerGUI x 86 to open the Management Console in 32-bit mode.

    2. in PowerShell, run the following command: & ${env:ProgramFiles(x86)} \PowerGUI\AdminConsole_x86.exe }

    3. in cmd.exe, run the following command: "% programfiles(x86) \PowerGUI\AdminConsole_x86.exe"

    Note that you can have only one instance of the Console of administration open at a time, so if you have already opened the Management Console in 64-bit mode, you need to close this window before you open the Management Console in 32-bit mode.  Also note that you may need to wait a few seconds after closing the window of the Management Console for the process to stop completely, how you can re - open it in 32-bit mode.

  • Change the configuration of the built-in VNC server

    I'm experimenting with a code where I want to spend the VNC server inside the workstation 7.1.2 via the VIX API by writing to the runtime configuration variables. Just now using vmrun to do that, but doesn't seem to work. So the commands are:

    vmrun writeVariable runtimeConfig RemoteDisplay.vnc.port 5900

    These back via the command readVariable reading shows that they have been properly defined. However before you use VNC viewer to connect to localhost:5900 port fails. On the other hand if I enable it in the comments running via the settings dialog box, I am able to connect to the host via VNC.

    Is this a bug, wrong orders or simply not taken care of?

    Hi DaveP,

    I think that would fall under "not supported" for now.

    In my view, the component of VNC server of the running virtual machine process reads these configuration values only when the process starts up (so when you turn on or resume the virtual machine) and then is configured correctly. He will not change his report based on these being defined via vmrun (values are basically just put in a database in memory, there is nothing to say the re component - check the values once you make those calls).

    Basically, the VNC server cannot be configured (enabled or disabled) when running. You will need to power off the virtual machine, change the configuration file and power then turn it back on.

    OK, that last paragraph is not really true, since you can configure the runtime through the user interface. But, it is true, then it's vmrun or VIX. So, the primary response is the same: 'not supported '.

    Post edited by: mattrich

  • Impossible to change the location of network "home".

    I have a connection to the local network (crossover cable) between 2 laptops. I am unable to change the location of 'the House' because the usual blue undelined 'link' is black & not highlighted!

    A computer can Ping each other but not vice versa

    Everyone can 'see', but not 'accessible' files on the other. All the sharing options are enabled & Firewall exclusions in place.

    Hello

    If the computers are configured for the domain, you must give his general network.

    http://www.ezlan.NET/network/net-name.jpg

    Otherwise it is not so clear that he is now on (and maybe it didn't matter).

    What you describe sounds more like firewall blocking LAN communication and permission to share the configuration.

    Maybe this can help.

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted

    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

    In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

    http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • How can I change the configuration for the output channels analog on a PXI-6704?

    I can't seem to understand how to access the configuration of the channels to the outputs analog (channel 33 and 35) for PXI-6704.

    This piece of test equipment is out of tolerance and must be calibrated.

    I have followed the procedure of calibration http://www.ni.com/pdf/manuals/374081b.pdf, but am getting hung up on step 8, where it is said to repeat steps 4-7 when changing the _cal_ao_current_offset. I can't figure out how to open this channel because it is not listed as a physical channel for step 5.

    I'm using Labview 7.1

    Thank you

    Hello! What you need to do is to add 'Internal channels' to your list of channels, so you can choose the _cal_ao_current_offset or _cal_ao_voltage_offset.  This is done through the drop-down list channel right click and select "I/o name of screening...". ».  There will be a check box that says 'Internal channels' and will provide you with all available internal channels to enter your vi Create Channel.  I have attached some photos illustrating how to do. See you soon!

  • cannot change the process unique network released (cleared)

    I have software running on a fieldpoint which normally runs standalone but I need to run a simulator to debugging on a windows computer. The RT software uses several shared single process variables that are deployed to the target. In order to launch the simulator that accesses screw has also deployed to the target, I also access these variables on the windows machine (but only during the simulation).

    I thought I could do this simply by changing the shared variables 'unique process', "network broadcast" through their properties dialog. However, when I access those variables, the network published option is grayed out. Does anyone know why this is? I prefer not having to recreate these variables from scratch, they are connected in several places in the application.

    I have included the library file that contains these variables, in case anyone knows anything I put in it that prevents the change to the published network.

    Hi Kgolden

    The reason that you are not able to select the network has published is because the refnum of queue is not a data type that can be sent via a published network shared variable.

  • How do you change the configuration of the drive in the bios with the master and slave?

    When I bought my Dell Dimension 8300 several years ago, I had installed a DVD player and a CD + RW drive and a floppy drive installed in the system.  Very early the system crashed and the OS discs had to be reinstalled.  The Tech is frustrated and accompanied me by changing the master/slave in the bios.  My DVD player is now the master and my CD + RW is now slave.  My cd burner and DVD player play, but they do not burn or import music.  I was wondering if the fact of change that might help the problem with the stopping cd burner just in the middle of a burn error 4450 or ((0X00001162).)  Thanks for your help.

    Hello
    If you are referring to the sequence of boot Yes the bios is where you want to change it see this url http://helpdeskgeek.com/how-to/change-boot-order-xp-vista/ ... . If you are referring to master vs. slave then that is something else see this url http://www.scribd.com/doc/96827/Master-Slave-Configuration access http://support.microsoft.com/default.aspx/kb/283658 Device Manager and check for the x red or yellow?
    itunes error code points? is this correct
    I do not think that it will make a difference to change the devices around, but there's enough information here to know what to do....
    I don't think that changing the order of stertup is going to fix this problem, but again once there is info here to address this issue...
    I would however check the device mgr if there are brands so you can set from the Device Manager and there is news for this
    I think that your problems stem from itunes, if that's the case, it would be best to see if this is the case, however, if the case is you are using windows media player let us know if this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK

Maybe you are looking for