channel search and move decimal places

Similar Questions

• Series read the analysis of the data works fine, but the polarity and point decimal placement does not

  I'm new to labview and work on a project that accepts the biotic data. I have read the information and analysis data correctly but when I try to set up the number the polarity and decimal pt do not seem to be correct. When the polarity is negative, a 1, the number that came out is positive. I have posted before and was invited to use the concatenation and the power of 10 and I wonder if it's okay. Should I be looking for the 1 (negative bit) and negate the number at the end before the release?

  I have another question: how to accept a number between the touch screen and just write this number in an output file? I searched in the help and online but found no example.

  Any help would be appreciated.

  I have included my vi.

  Thank you

  I'm sorry, I apologize. I thought since it was a new problem to a new position. I've corrected the problems mentioned in this post me. Oh and when I created the project/vi I created it as a touch panel.

  Thanks again.

• Deliver the result rounded to 2 decimal places.

  Good day to all,

  I currently have a script format in order to get the average of 10 fields in my form that also ignores the empty fields. Here is my current script:

  Initialize variables

  var num = 0;

  var sum = 0;

  Check input fields

  for (var i = 1; i < 10; i ++) {}

  var f = getField ("Assesment_Rating" + i);

  If {(f.valueAsString)

  increment the counter to non-empty field

  NUM ++;

  Add the value of the running total field

  sum += + f.value;

  }

  }

  Calculate the average

  If {(num)

  Event.Value = sum / num;

  } else {}

  If the fields are empty, so put to white

  Event.Value = "";

  }

  He is currently working if I have a total of 1.4444444444444, this is what is displayed. I tried a few functions of Math.Round who give me "1.5" as a result that is not correct. I'm still learning so I could try a Math.Round function in the bad part of my code, but can not get the result I need.

  Thank you in advance for your help!

  This script should be a personalized calculation script that sets the value of the field. You can then set the type of number format and two decimal places.

• My search expanding bar moves upward and out of place slightly whenever I click on it

  My ever-expanding search bar moves upward and out of place slightly whenever I click on it, however it occurs only in google chrome. She will move up to three times slightly, higher whenever the fourth until the trigger is in the correct position. Anyone has any idea why?

  I discovered how to sort, I just changed the entry to an absolute position to parent and who seems to have sorted!

• How to make the calculation script to show 2 decimal places and stop rounding down to integers?

  Hello. First of all, thank you to those of you who have helped me create an interactive PDF file last year that worked perfectly if only integers are entered. This year, my client wants to show two decimal places in the calculations, and I'm back in this forum hoping to find the same expertise to make it happen.

  My form includes 43 fields for various monthly expenses. The sign of dollar for each field is part of the content of the form, not part of the scope of formatting. Users enter values directly in these fields, and the fields are formatted to display two decimal places. Each of these includes a the following validation script:

  Event.RC =! (event.value & & + event.value < 0);

  
  

  To the right of each of these fees, the fields are yes/no boxes ( expense Typecalled) that answer the question, "is this essential expense? The value of exports for Yes's 'essential', and the value of exports is "discretionary".

  
  

  A value entered in all areas of expenditure is directed to the field Total expenses by checking Yes or field Total discretionary spending by clicking No. two of these total fields are formatted to display two decimal places. In addition to long calculation scripts, the two totals fields include this custom validation script:

  If (event.value == "0") {event.value = util.printx ("", event.value)}

  Here's the problem: when values with two decimal places are entered in any area of expenditure, the calculation in two fields of total script rounded to the whole number closest. When 10.99 is entered in a field of expenditure and the Yes checkbox is checked, the value 10.00 is displayed in the field Total expenses . I want to display 10.99.

  For testing purposes, I inserted a new text field and did a simple calculation in choosing the fields of the somme and the values displayed correctly. The problem is definitely with the script in the two fields in total .

  
  

  I can drop the scripts of math here, but they are long and I'm not sure what the Protocol is super-long positions. I could also download the file, but I never did it and will need to understand this.

  Thank you for taking the time to read this. If you can help me, very well!

  To explicitly convert the field values for numbers, do something like this instead:

  var expense0 = + getField('monthly$.0').value,

  depenses1 = + getField('monthly$.1').value,

  etc.

• Need help on query with decimal places and trailing 0

  Community of Oracle I need help in the following situations:
  
  I received the following query:
  SELECT (SUM ("VALUE1") COUNT ("VALUE2"))
  FROM sometable;
  
  This returns the following results:
  200
  222,5
  
  I want to display as 222.50 222,5 value so I tried ROUND(value,2) but then came to the conclusion that the tour will not show drags me 0.
  So now I tried to_char(value,'9999DD00') and of course he's back 200.00 both 222.50.
  
  Now how to make it conditional so when a number has no decimal place it shows the whole number and when it has a decimal, it shows it in the format to_char(value,'9999DD00')?
  
  I hope I have made my situation and question correctly and I hope a solution.
  
  P. S.
  I need to appear like that since it is an average of the prices of the products
  
  Published by: Jnijman on July 3, 2010 13:06

  You can use CASES and INSTR:

  SQL> with t as ( -- generating sample data:
    2  select 200 col from dual union
    3  select 222.5 from dual
    4  )
    5  --
    6  -- actual query:
    7  --
    8  select col
    9  ,      case
   10           when instr(col, ',') > 0
   11           then to_char(col, '999d00')
   12           else to_char(col, '999' )
   13         end formatted_col
   14  from   t;
  
         COL FORMATT
  ---------- -------
         200  200
       222,5  222,50
  

• How can I place and move items (in particular form fields) more accurately?

  I use Acrobat 9 pro, but also 7.

  When the forms using more than one field, the first problem is the fields can be placed in locked

  increments and these increases are too wide for I have to manually align the fields.

  I don't know why adobe did not allow small increments, the tool is essential, and this reduces its usefulness in half.

  Manually aligning them be too bad but the progressive jackpot is also set to move in increments too large.

  As far as I can tell it is the smallest unit of movement is 2 points. But there are moments where I really need to spend 1 point,

  or even 1/2 pt.

  Plug-ins to do this things function the way it should?

  A fine workaround would be a grid I have less 2 points, then I could just check 'snap to grid' and move away.

  If you have 9 Pro on a PC, you should have installed Live Cycle Designer. It has more useful features. Webcam Live Cycle Designer is not provided with Acrobat Mac, for reasons that I don't know. Looks like you can set the x - y coordinates.

  

• Query to find records with more than 2 decimal places.

  I have written the below query to find records with more than 2 decimal places, but it is returning records with decimal places 1 & 2. 
  The datatype of the AMT column is NUMBER (without any precision).
  
  SELECT amt  FROM amount_table
   WHERE substr(amt, instr(amt, '.')) LIKE '.%'
         AND length(substr(amt, instr(amt, '.') + 1)) > 2

  Output:-
  
  AMT
  
  * 41591.1*
  * 275684.82*
  * 64491.59*
  * 3320.01*
  * 6273.68*
  * 27814.18*
  * 30326.79*
  131.8413635
  162.5352898
  208.5203816
  8863.314632
  22551.27856
  74.716992
  890.0158441
  2622.299682
  831.6683841
  * 1743.14*
  2328.195877
  3132.453438
  5159.827334
  3.236234727
  37.784
  

  Thanks

  Hello

  user1585440 wrote:

  when i inserted fee_amt as 41591.0999999999  it is displayed as 41591.1 in the output i.e,
  
  insert into amount_table (line_number,fee_amt) values (100,41591.0999999999);
  
  select fee_amt from amount_table  where line_number = 100. this query shows the output as below
  
  fee_amt
  
  41591.1
  
  The fee_amt column has number as datatype (without precision)
  
  Why it is automatically shown rounded off as 41591.1? 
  

  Published by: user1585440 on December 28, 2010 04:50

  You use SQL * more your front end?

  SQL * Plus has a fixed width to display all columns. The default for numbers is 10 characters. If necessary, SQL * Plus will be round a number or the use of scientific notation, to represent the number of the expected number of characters.
  You can use the SQL * more "SET NUMLARGEUR" to change the default view for all the numbers of orders, or "COLUMN" to set a sepcific format in an individual column.
  If you explicitly convert your channel numbers in a query, SQL * Plus adjusts the column width to whatever is needed. For example

  SELECT  TO_CHAR (fee_amt, 'TM')     AS fee_amt_d
  

  "TM" is the default format; You can call TO_CHAR with a single argument, if you prefer.

• 'Work and movement' (the most recent version of iTunes) ID3 tag bug

  I did experiment with new "work and movement" feature of iTunes, which is very convenient when the marking of classical music. I noticed a rather irritating bug, however: he resents as ¨ or ss, non-English characters. If the movement is titled "Fur bewegt," which in German means "lively", the characters 'Ä' and 'ss' are replaced by a strange diamond of sorts (similar to "◊") as soon as the track is. I can change it at the first spelling later, but the problem recurs whenever I have to replay the track. I want to bring this attention to Apple, so I hope I posted this in the right place.

  http://www.Apple.com/feedback/itunesapp.html

  I don't know anything firsthand about the new iTunes (I still use iTunes 7.5), but this kind of problem may also depend on you use character set.  I know that I can change that in my version of iTunes in the Advanced menu and you might try to experiment a different game.

• Going crazy trying to select and move multiple points of tempo

  I tried to move a whole bunch of tempo of a bar points to a spot 4 bars later in my project. First time this... For the life of me I can't figure out what I'm doing wrong as I * try * follow the steps here: Logic Pro X: move and copy points of tempo

  Here's a quick screencast to choose me (while holding the CONTROL key) and then drag (hold down CTRL key):

  https://youtu.be/HpLHQbV4y9U

  (The editor let me not insert a video this time so I downloaded on YouTube instead.)

  I tried dragging dragging the first point of tempo, dragging from the last point of tempo, a place randomly in the Middle the selected points. I also tried now the shift and CONTROL simultaneously select and drag when he did not work on the other hand, only because the instructions mentioned the option to SHIFT + click in the selection. Finally, I tried the same thing while now the SHIFT key instead of CONTROL (don't wait not that it works of course because the instructions didn't say to do, but I tried the way described several times and she didn't).

  Get these points of tempo settles is the last detail in a huge song that ended the case

  There must be some small detail that I forgot the instructions. Any suggestions? Thanks in advance!

  Use the smudge tool to enter the automation of tempo and move it left or right...

  

• How can I get rid of the google bar search and instead of showing the url I'm going too. So I can see if I have a https connection or not.

  I'm under 32.0.3 firefox but now don't see my URL address anymore I went too. I want to see if it is secure or not linking, and sometimes I might want to cut and paste the URL in a message, etc.. Everything I have now is a google search bar or you can choose from aol or other search engines.
  Thanks for any help. I've been a user of Firefox from the very first day, but if I can't resolve this I might have to bite the bullet and move on, I don't want to do.

  Can you post a screenshot?
  https://support.Mozilla.org/en-us/KB/how-do-i-create-screenshot-my-problem

• When a new tab opens the cursur button in the address bar to search and not the search engine

  When a new tab opens the cursor will move to the address bar to search and not to the search engine, I put to a new tab page.

  I went to about: config and changed keyword.enable to false. It works for the homepage at Firefox startup.

  How to disable the address for a new tab search, as I did for my homepage?

  sheilahsay

  Hello sheilahsay, maybe this addon works for you: https://addons.mozilla.org/firefox/addon/custom-new-tab/

• Audio files and movies in my iMac, how to find them?

  It seems that my iMac HD have Audio files and movies.

  I do not remember that I downloaded from these files.

  How can I find / manage them please?

  Maybe my iOS devices?  (synchronization via iTunes)?

  Thank you.

  

  Disk utility class files by type. They can be found anywhere, as in e-mail messages and attachments, Photos, downloads, your library, iTunes etc. Look in these places. If you are unsure where to start there are some utilities that you can use as WhatSize. It is available in the App Store. This is just one example; There are other similar products.

• To the number of decimal places control user input

  Hey everybody,

  I am all new to LabVIEW and just learn how it works. I was wondering if there was a way to allow user input to change the number of decimal places (the output of my function is infinitely extensible).

  I tried, but it did not work:

  Using a digital input, I appended a string with "%" + '[INPUT]' + 'f' with the number of function concat strings and string functions. I used the resulting string as the formatting string in the value format function.

  This doesn't quite work. The output should be something like "28.274", but instead, it displays "283f. Anyone know why? Is there a better way to do it?

  In addition, attach a picture of the front panel and diagram of block for clarity.

  (Yes, it's homework, but the assignment does not include allowing the user to adjust the number of decimal places, it's just something I would like to add.)

  Get rid of the number 2 for the width of your decimal string number.  It requires a space before a number to a number.  %. 6F is not equal to % .6f.  The string format don't quite understand the first format string.

  (PS.  It helps if you attach your VI.  In this way we can play with what you have rather than trying to recreate it from scratch.)

• I need help my Webcam setting and put in place.

  I NEED HELP MY WEBCAM SETTING AND IMPLEMENTATION. I BOUGHT IT USED

  I need help my Webcam setting and put in place.

  Thinking about ask you for help using Bing, Google or any search engine you want to use.  Try entering "set up the webcam" in your search parameters.

  Or ask for help on the Web site of the manufacturer of the webcam that you have purchased.