Chaos of partition after you remove the boot camp partition

Hello guys,.

After that I was updating win10 with the new update... that was a bad idea... I tried to do a clean install of it.
After failing to do so hard, im really stuck and don't know what to do:

boot camp will not let me delete, they 3rd option is still grayed out. so I deletet with tool drive and tried to install win10 via boot camp several times - it does not work because that is always something worng with the partition I chose to install it.

No, I think I really messed up my partitions and I don't really know what to do anymore, so I post this:

/ dev/disk0 (internal, physical):

#: NAME SIZE TYPE IDENTIFIER

0: GUID_partition_scheme * GB 121,3 disk0

1: disk0s1 EFI EFI 209.7 MB

2: Apple_CoreStorage GB internal drive 121.0 disk0s2

3: disk0s3 Apple_Boot Boot OS X 134,2 MB

/ dev/disk1 (internal, physical):

#: NAME SIZE TYPE IDENTIFIER

0: GUID_partition_scheme * 1.0 TB disk1

1: EFI EFI 209.7 MB disk1s1

2: Apple_CoreStorage GB internal Drive 483,9 disk1s2

3: disk1s3 Apple_Boot Recovery 650.0 MB HD

4: Microsoft Reserved 16.8 MB disk1s4

5: Windows Recovery 471.9 MB disk1s5

6: EFI No. 104.9 MB disk1s6 NAME

7: Apple_HFS 123 514,7 GB disk1s7

/ dev/disk2 (internal, virtual):

#: NAME SIZE TYPE IDENTIFIER

0: Apple_HFS Macintosh HD + 599,0 GB disk2

Logical volume on disk0s2, disk1s2

1D528A9D-C552-417B-BF2A-C9C6AA49B5FD

Fusion unencrypted drive

/ dev/disk3 (external, physical):

#: NAME SIZE TYPE IDENTIFIER

0: FDisk_partition_scheme * disk3 16.0 GB

1: DOS_FAT_32 WININSTALL 16.0 GB disk3s1could help me

Maybe someone can help me to get through this... I don't really know what it takes to "reset" my scores so I can again reinstall win10.

iMac 5 k late 2014, 1 TB fusion drive, el capitan 10.11.6

Disconnect external drives until Windows is completely installed.  If you are prompted for a USB key, use only a not a USB HDD, flash drive.

You seem to have deleted the partition of BC using disk utility, which is not a good idea. Do not mix BC Assistant and disk utility.

Perform the following two procedures after each failed attempt.

Reset the management system (SCM) controller on your Mac - Apple Support

How to reset the NVRAM on your Mac - Apple Support

In the current state, disk1s4-disk1s7 should be merged into one FAT32 partition, if you want to re - use for BC/Windows.

Tags: Windows Software

Similar Questions

  • I received this error message after you remove the address something about Cloud.app

    I received this error message after you remove the address something Cloud.app.   Can you tell me how to fix this error message. "  '/'  "  ?

    Hello Phyllis,

    When you receive this error now?

    Let's run boot minimum troubleshooting to find the cause.

    Windows XP:

    http://support.Microsoft.com/kb/310353

    http://support.Microsoft.com/kb/316434

    Windows Vista and Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

    Best regards

    Matthew_Ha

  • Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be

    Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.

    Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?

  • How to remove the boot camp on my pc?

    I have to delete the boot camp to increase memory Mac

    As the Assistant Boot Camp is a part of Mac OS X to create a partition to install Windows, I don't really think that you really want to delete it.

    Instead, I think that you want to delete the partition that contains Windows and which is made from the Boot Camp Assistant. For instructions on reading this Boot Camp: Remove Windows from your Mac

  • How can I access the dialog "Manage search engines", after you remove the search bar?

    I removed the esarch bar, since I can get exactly the same functionality through the url bar (also called awsome bar, I think). I use several search engines but select the default ones with key words.

    The only thing I'm missing is the ability to access the dialog box "manage search engines". The only geto him he seems to be the drop search bar icon. Is it possible to access this dialogue without having to add (and re - hide the afterwords) the search bar?

    You can create a bookmark with this chrome URL:

    • chrome://browser/content/search/engineManager.XUL
  • HP15: error Hp printer after you remove the program from the printer.

    I looked in the startup of Windows C. and ran msconfig, but can not find the files that has been said in the previous post.

    So what I do now? I want to get rid of this error message at the beginning upward

    Hey @vmundy2,

    Thanks for getting back to me on this subject.

    The HPStatusBl.dll is alerts ink Monitor on the computer. The uninstall process could not delete the shortcut for it.

    I can have you try the steps mentioned by my colleague @HevnLgh here: Re: DLL problem run to remove the specific file.

    Please let me know if these steps resolve the dll error. Good luck!

  • hidden files after you remove the virus from windows recovery.

    Original title: cannot open files by users, but can search for them.

    Hello.

    I have a Sony Vaio model VGN-AR71E running Vista Home premium. He recently got infected with a fake trojan of the anti-virus/malware, which was successfully deleted.

    The virus initially seems to have erased all the etc. documents/photos/music on my laptop. Users, there is only an empty file "public". However when I search for a file by using the start menu, I can find and open a file and the location is listed as it was before the virus (for example C:/users/me/images etc.). Also when I run itunes all my music is still listed as usual and plays.

    Has anyone advice on how to restore my user profile, so that I can access my files easily again?

    Thank you.

    Hello

    do you remember the name of the malicious software?

    If it's "Windows Recovery" read the information contained in the link

    read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

    Read article 17

    http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  • Content of PersistenObject disappears after you remove the app and the new facility

    Hi guys,.

    I discovered the following problem with my app:

    1. when I update app with new version all persistent data is stored very well.

    2. when I delete the app and install it again - some of the persistent data disappears, some is always there.

    I think it depends on who what is persisted. If there are classes of applications store is deleted on uninstall, if there are classes of system store will not be erased.

    Can you tell me about the resource, where it is described?

    Thank you

    Eugen

    I found:

    When you use the persistence model of BlackBerry, data is removed only if the store contains data that belongs to the deleted application.

    For example, if an application stores an object with a package named com.mycompany.application.storage and no other application on the BlackBerry smart phone makes reference to packaging, permanent storage and the deleted application are removed.

    The knowledge base article:

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800647/How_To _...

  • ValueChangeListner do not get fired when I entered the same value after you remove the first.

    Hello world

    Can anyone help on this.

    JDeveloper version 11.1.1.7

    I use '< af:inputText >' with valueCaangeListner.

    Here as soon as I entered a value, valueChangeListener get fired...

    Problem:

    When I remove the and I entered the same gain value in the text entry box, ValueChangeListner do not get fired.

    When I came again, a value different valueChangelistner get me fired.

    Kind regards

    Malenfant.

    What you say is logic and sense, you enter 500 then delete 00 then add 00 in inputText perspective there is no change in place, therefore, the converter does not occur because there is no changes occur.

    To do something like that you can do a work around using javascript. You can follow these steps:

    1. Select af:inputText and bind it to the backbean

    
    

    2 - Add clientListener and serverListener inside inputText as:

    
        
        
        
    
    

    3 - Add handelEnterButton as javascript method:

    function handelEnterButton(event)
    {
      var code=event.getKeyCode();
      if (code==13)
      {
         var source = event.getSource();
         AdfCustomEvent.queue(source,"serverListenerOperations", {}, false);
      }
    }
    

    4. in the method of serverListener back bean refresh as inputText component:

      public void serverListener(ClientEvent clientEvent)
      {
        RequestContext.getCurrentInstance().addPartialTarget(getMyInputTextComponent());
      }
    

    5. now, try to change something in the inputText and then press enter

  • How do I know what ethernet controller, you need to download after you remove the privious?

    I deleted my ethernet controller and its drivers also by chance, I have a Windows xp professional edition and I did not what site and/or ethernet controller and driver (s) of can you help me please, I tried something earlier and I thought that he had worked but there no, unfortunaly im collefe student and I really need my computer back...

    OK its not tell me the name of the adapter, theres been a caution icon or a question mark next to the word ethernet controller. its saying that after that I click on properties under controller ethernet, device Type: other devices. Manufacturer: unknown. Location: Bus PCI 5, device 2, function 0 then in device status it says: "the drivers for this device are not installed (code 28).

    Download the two.  Only installs.

  • Cannot connect to Windows after you remove the password to logon.

    Original title: remove user on xp.

    Ive just bought a 2nd hand laptop with the user info & passes his windows xp my son just try to change the password, but instead, he deleted the password and then registered so now, when you try to log on it has the original name of the users, but it won't with the exception of the original password please help!

    Hello

    If your son has been removed and then the password should not ask password during logon Windows.

    See the article mentioned on the Microsoft Policy below we lost or forgotten the password.

    Microsoft's strategy concerning lost or forgotten passwords

    Reference: Keep passwords secure strategy of Microsoft on move passwords 

    Hope the helps of information. Please post back and we do know.
    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Event ID: 637 is not triggered after you remove the remote desktop user

    Hello

    Suddenly, three of the users to the remote desktop users group has been removed, but I'm not able to find the event: 637 in the security event log.  However, I got a test to remove a user from the remote desktop users group, but the event id: 637 has triggered and found.

    I need to check what the user has been deleted?

    Thank you
    Yasser

    Hi Yasir,

    Thanks for keeping us posted and share this information with us.

    I would have you post your query in the TechNet Forums.

    Check out the link-

    http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

    Back to us for any issues related to Windows in the future. We will be happy to help you.

  • Laptop does not work after you remove the virus win32/winfixer

    Original title: win32/winfixer

    I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...

    Hello

    1. what exactly happens when you start on the desktop?

    2. you get any error message?

    3. is your laptop work fine in safe mode?

    4. What are you trying to download?

    5. How are you trying to download?

    6. What is the full error message do you get?

    7. don't you make changes to the computer until the problem occurred?

    I suggest you to see link below and check if it helps.

    Method 1: How to fix a computer that does not start.

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

    More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

    Hope this information is useful.

  • Get the Error Message: "user profile service service has no logon. Unable to load the user profile"after you remove the Windows Vista administrator account

    Original title: deleted Vista ultima. admin identity and admin authorization password for standard users will not work.

    I inadvertently deleted the admin. identity, I think in Vista Ultima. The photo shows still on the identities, but when I try to open the identity I get the following message, "user profile service service has no logon. User profile cannot be loaded. The admin. password does not work in any of the other identities now, so I can't do updates to most of my programs, such as windows. I can't open the control panel to add and change of identity.

    Hi JBRA47,

    You can consult the following Microsoft KB article and check if it helps to solve the problem:

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    http://support.Microsoft.com/kb/947215

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Problems with Windows 7RC in the Boot Camp Partition

    I have Windows 7 RC (32-bit) running on a Boot Camp partition on a 2nd generation of MacBook Air.  When I try to load it in VMWare Fusion 2.04, I get a BSOD just after the "Starting Windows" screen finishes loading.  It says that Windows has detected a problem, try to restart and executes the boot system diagnostic tool, nothing helps.  I tried implementing VMWare using Vista and Windows Server 2008, 1280 MB RAM and 3D on and outside.  Any ideas?

    akuska wrote:

    I have Windows 7 RC (32-bit) running on a Boot Camp partition on a 2nd generation of MacBook Air.  When I try to load it in VMWare Fusion 2.04, I get a BSOD just after the "Starting Windows" screen finishes loading.  It says that Windows has detected a problem, try to restart and executes the boot system diagnostic tool, nothing helps.

    At the time current Windows 7 in any version is not supported by Apple on the Boot Camp partition, nor is it supported in any way under Fusion.

    Although it is not supported, it will work however it depends what Guest select you when the virtual machine based on the creation of a regular file.  I don't got no problem using Windows Server 2008, when the virtual machine based on the creation of a regular file.

    On your Boot Camp partition was a clean build or you have an existing Boot Camp partition previously Virtual Machine.  If you had a Boot Camp existing partition previously Virtual Machine then try the following.

    ====================

    Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

    ===

    1. If the merger is open, close it.

    2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

    Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

    RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

    ====================

    I tried implementing VMWare using Vista and Windows Server 2008, 1280 MB RAM and 3D on and outside.  Any ideas?

    VMware is a company so I doubt that you have implemented the company however, your statement is a bit ambiguous because it is not clear if your always talk your partition Boot Camp Machine virtual matter in Fusion, you tried to select each of them as an OS on the entrance of Boot Camp partition on the Virtual Machine library and it didn't help the Boot Camp Virtual Machine partition number or to be issues with creating virtual machines with these operating systems.

Maybe you are looking for

  • Audit failed repeatedly

    I have an iPad which is uptodate.  I am connected to the Apple with my username and password from apple.  But if I try to update my applications, I have received the certification failed - there was a connection to the server id apple error.   the pa

  • I can't remove a Location Bar Autocomplete entry

    When you try to follow the steps to remove an item from the location bar AutoComplete list, as shown here: http://support.Mozilla.org/en-us/KB/search-your-bookmarks-history-and-tabs-awesome-bar#w_removing-AutoComplete-results I encountered a problem

  • Problems with Satellite A300-1 b 0 cooling: fan does not stop

    Hello users,. I m new on Linux and Ubuntu, I installed ubuntu 8.10 last week;All things are ok, ok start menu because I have XP, network ethernet connection and wireless, updates ok, ok packages!just one thing that make me "' it's my laptop fan, I ex

  • Tecra S4 - sound card has suddenly stopped working

    Hello I have a Tecra laptop S4 and the sound card has suddenly stopped working... It ceased to operate as last month and then started working again... but now it no longer works I am a computer tech for 14 years now... I downloaded the drivers from t

  • Threshold values

    Hi all If I have a sin-wave captured from an oscilloscope labview went from zero to 10 seconds, how can I do to make labview will tell me all the time when values is exactly 0? I have explored the peak of waveform detection.vi, but do not get back us