charge battery after installing the new battery does not exist

I use Windows 7 Ultimate Spk1 32 bit on my laptop (big mistake)
I recently installed a new battery & put it through the cycles of preparation 3 times following the instructions.
The next time he went down to the alarm of low level newly together and I added the power adapter, nothing happened, the battery wouldn't charge.
After many attempts to do nothing improved load, especially my temper.
They advised me to install another battery which I just did, and this SECOND new battery just sits there & will not charge either.
When he arrived he had 10% fresh rate showing so I removed the AC adapter and let him draw 8%, but when I replaced the adapter he had served on 8% & does not load.
What is going on? How a simple thing like recharging simply disappears. ?
Does anyone have a solution for this problem?

See you soon
Geoff

Advertisement

The charging circuit inside the laptop and recharges the battery while the laptop is plugged into the mains. If the load circuit does not have the laptop is running on a charged battery or the power cable, but won't charge the battery.  The fact that the machine failed to load two new and old battery suggests the charging circuit has failed.

Tags: Windows

Similar Questions

  • After installing the Windows SP3 does not open.

    I have a laptop Sony Vio running Windows XP Home Edition. Last week I tried to update from SP2 to SP3. After about 2 hours, it was at the point of file cleanup. After a time to shout a message came uo 'Please Wait'. I waited all night, and the message was always there in the morning. I restarted the computer and now Windows wilol is not open. He turns the splash screen and then the screen turns blank ever opening in the icon screen. When I try to start safe mode it runs a number of lines if information and where he had reached the end of one line info nothing happens. I tried to boot in a security 3 with the same resunts mode. Tried running in the final Condition to work with the same results - Windows startup screen runs then screen turns white and screen icon never opens. I have makes the system, Application and Driver Recovery CD. That SP3 could have done to create this condition? No idea how to fix ths situation without losing me any files - images Woed docs etc.? Any help would be greatly appreicated.

    At this point, your main goal should be to backup all your files from user data that you can from your [no bootable] machine.  I find that a good way to do it is to this is to use another machine to create free Linux Livecd such as Knoppix or Ubuntu (if you use Ubuntu, do not install but use instead "Try Me").  You do this by downloading an .iso file and then use the "burn image" of your program of CD burning to create the bootable CD/DVD.  You can now start your laptop from this CD and Linux will allow that access you your hard disk without disturbing anything on this subject.  You can then copy off and back up your data on a USB stick or a network drive files.

    Once your files are safely backed up, you can then reinstall Windows using the recovery disks you have.

    Knoppix: http://www.knopper.net/knoppix/index-en.html>
    Ubuntu: <> http://www.ubuntu.com/download/ubuntu/download >

    Recovery CD Windows are also a possibility but more effort involved to create the CD.  Such a disc is "BartPE".

    BartPE: <> http://www.nu2.nu/pebuilder/ >

    HTH,
    JW

  • PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

    I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

    The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

    I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

    Finally, I have checked the audio drivers and the reporting system they work without any problem.

    What should I do next?

    Thanks, Terry

    @Terry57

    Thanks for the reply,

    I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

    However, I have provided details below:

    To perform a hard reset on a computer equipped with a removable battery, follow these steps:

    1. Turn off the computer.

    2. Remove the computer from the docking station or port replicator.

    3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

    4. Disconnect the power adapter from the computer.

    5. Remove the battery from the compartment to batteries.

    6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

    7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

    8. Press the power button to turn on the computer.

    9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

    10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

    To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

    1. Turn off the computer.

    2. Remove the computer from the docking station or port replicator.

    3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

    4. Disconnect the power adapter from the computer.

    To perform a system recovery, this link should work: click here

    Keep me posted for any technical assistance,

    Kind regards

  • Error 0X0000007E Stop after installing the new card mother and CPU.

    Original title: Stop error after installing the new card mother and CPU.

    After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

    If you have made the change without having to reinstall XP, you will be taking and Pray [email protected] the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

    I hope this helps.

  • I'm having trouble installing Photoshop CS6 after installing the new hard drive.  What do you suggest me?  Tony

    I'm having trouble installing Photoshop GS6 after installing the new hard drive.  What do you suggest me?  Tony.

    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

    You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • The specified service does not exist as an installed service

    Recently I seem to have problem with every thing in my laptop under windows vistas. When I try to open any program such as device 1 Manager) 2) install/uninstall any program 3) manage computer 4) remove a printer, etc., it gives only the error "the specified service does not exist as an installed service. I am unable to set something good with my computer. the system tray has the error "The Audio Service is not running". The windows update is on and its updates up to today date from the. I can't even install the 'Active X' in IE8.
    Even when I open MS office like word or execl program opens a file, but it takes 5 minutes to get active average as it opens, it gets busy. We can open other programs, but not MS office program.

    Good advice to set this right. Thank you and best regards.

    Hi Dilippatel,

    A. when it last work very well?
    B. recent changes made on your computer?
    C. who is the manufacturer of your computer?

    Try the following steps.

    Step 1 : clean boot

    A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

    1: perform a clean boot
    2: enable half the services
    3: determine whether the problem returns
    4: enable half of the startup items
    5: determine whether the problem returns
    6: solve the problem
    7: reset the computer to start as usual

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135

    After reviewing the issue, put the computer into Normal mode. Uninstall or update the program that is causing the problem.

    Step 2:

    1. click on start.

    2. type regedit in the search box start and press to enter.

    3. navigate to the location:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BBBFC1-08002BE10318}

    4 remove the LowerFilters value in the right panel. (NOTE: under the key, it)
    are also some sub keys for example 0000, 0001. Please, double click it and remove the
    LowerFilters value.)

    5 restart the computer and check if the problem persists.

    Important this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

    Try these steps and let us know the result.

    Please post you rquestion in the discussion group of the Office for issues related to Microsoft Office.
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • I get a message saying "the specified service does not exist as an installed service."

    Hi, im having problems with windows vista where whenever I try to update my system (security, java, adobe) or I right click on the sound icon in the toolbar of my screen (and open) section, I get the message saying that the specified service does not exist as an installed service. SO, I searched online and which did not help. Oh and by the way, when I get the options after I have right click on the sound icon, I can't click on the mixer. IM using a dell inspiron 531 and it works on windows vista and is very slow, almost never answers (only restores the games that I have on it) and has an athlon processor. What should I do? Thank you, Shawn White. P.S. that's in the good topic?

    Hello

    1. you remember to make changes to the computer before this problem?

    2. what anti-virus is installed on the computer?

    Follow these methods

    Method 1: A Microsoft Safety scanner to make sure that the computer is free from virus infection:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Method 2:   Run the fixit in the following Microsoft article and check if it works.

    Solve problems with programs that cannot be installed or uninstalled:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    Method 3: Run a file system check Scan (scan SFC)

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    a. open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator.

    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    b. type the following command and press ENTER:
    sfc/scannow

    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    Merthod 4: Check services.

    Check if a service is stopped or disabled. You will need to check each service one by one. If you find any service is stopped or disabled, you must start or enable and check if the problem persists.

    http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  • C7280 Installation error: the specified service does not exist as an installed service

    All,

    I have an AIO C7280 printer that is connected wireless to my router.  I have a pc (Vista) cable and a laptop wireless (XP) connected to the router as well.  I have no impression of question from the pc.  However, when I try to install the driver on the laptop I get an error just after that he asked me if it's a USB drive or a network printer.  I chose the network and the error appears saying "the specified service does not exist as an installed service.  I ping the printer from the laptop so I know it can 'see '.  I don't know what to do.  I have uninstalled/reinstalled several times without success.  Can anyone help?

    Thank you.

    Edit for more information:

    After building a log of installation failure and 'details', that's what I see:

    Error Situation code: 20364041

    Now Launching = X:\hpzdui01.exe - gateoncmdline easyinstall | XXX f X:\hpoins21.dat-valider No.

    LaunchNetworkInstall retrieves the value unexpected 1060

    RUN: 50 return stops Driver UI plugin

    Exit code = 50

    Message edited by gatorman on 09/18/2009 16:57
    Message edited by gatorman on 09/18/2009 17:10

    The service that the error message refers is the HP network devices support service. Try this...

    Open the contents of the installation CD, and then open the file "setup." Now you will find either a folder named 'netdevicemanager' or simply 'network '. Open if it is present. Now there should be a file with the same name as the file, but with extension .msi. Right-click on this file and click on uninstall. If you get a message stating that the action applies only to products that have been installed, and then click OK. Restart the computer IF necessary. Now, right-click on the file and click on install. Installation do not normally present a window of 'success' You will just see a bar of progress for a few seconds and disappear. Once this happens, restart the PC and check if the HP Network Device Support or similar service appeared in the list of services. If Yes, then reinstall the software, and it should install correctly.

  • LaserJet P3010: Cannot install the printer. The print processor does not exist

    I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

    Problem solved. Use another port.

  • The new tab (+) does not work, or the file/new tab feature

    The new tab (+) does not work. The function of the file/new tab does no more work. Both had worked correctly until noon today. I haven't added any software, plug-ins or extensions today, I do not have the Ask toolbar. I tried several of the suggestions made on this site, nothing helps.

    This problem may be caused by an extension that does not work in the current version of Firefox.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.
  • The specified service does not exist as an installed service. (Error code: 0 x 80070424)

    I tried to turn on my Windows Firewall because they all stopped working for some reason any

    & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

    The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

    I tried to turn on my Windows Firewall because they all stopped working for some reason any

    & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

    The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

    The name of your what appears?

    Error 0 x 80070424   See: http://support.microsoft.com/kb/968002

  • Windows 2008 Server: unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

    Unable to update the password. the value provided for the new password does not respect length, complexity, or history of the field requirements

    Hello

    I suggest you to send your request in this forum for better support.
  • Error failed with error 0 x 80070424: the specified service does not exist as an installed service.

    I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?

    Diagnosis of network adapter

    Network location detection

    Info Using the Internet connection at home

    Identification of network adapter

    error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

    HTTP, HTTPS, FTP Diagnostic

    HTTP, HTTPS, FTP connectivity

    warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
    warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
    warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
    warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
    warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
    warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
    error Could not make an HTTP connection.
    error Could not make an HTTPS connection.
    error Could not make an FTP connection.

    Diagnosis of last run time: 16/05/12 16:09:47

    Diagnosis of network adapter

    Network location detection

    Info Using the Internet connection at home

    Identification of network adapter

    error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

    HTTP, HTTPS, FTP Diagnostic

    HTTP, HTTPS, FTP connectivity

    warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
    warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
    warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
    warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
    warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
    warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
    error Could not make an HTTP connection.
    error Could not make an HTTPS connection.
    error Could not make an FTP connection.

    Thanks for your attempt to solve my problem.

    Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-XP-Security-Service-Center-error-1060-and/1476c2b6-8161-4ccd-a69f-93292b5152da

  • Trying to turn on network sharing and discovery, I get the message 'the specified service does not exist as an installed service' I am running AVG internet security 2013

    When I try to change the networking of sharing and discovery, I get the above message.  I don't quite know what to try to fix the problem. Any thoughts would be helpful. Thanks in advance.

    Hello MarkPogue,

    Thank you for the question!

    I'm sorry to know that have problems you with the network sharing and discovery. "As I understand it, you get an error message" the specified service does not exist as an installed service ' trying to turn on network discovery.

    Make the SFC (System File Checker) scan and see if the problem occurs.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Answer to us if you are having problems with the network discovery or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

    Good day!

    Hope this information helps.

  • In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

    In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

    Hello

    Method 1: Make sure that the following services are enabled on the computer.

    (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

    -TCP/IP NetBIOS Helper service

    -DNS Client

    -Function Discovery Resource Publication

    -SSDP Discovery

    -UPnP device host

    To start the service and set it to automatic, follow these steps:

    (b) right click on each of the services listed above and click Properties.

    (c) click the general tab, and then, next to startup type, select automatic.

    (d) click on apply and then click Start.

    Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    For more information how to make SFC / scan, please follow this link:

    http://support.Microsoft.com/kb/929833

  • Impossible to share file error: the specified service does not exist as an installed service

    Original title: Impossible to share a folder in Vista

    I have Vista Home Basic 2007 with service pack 1. My software provider tries to share a file on the network and is unable to do so and has no solution. The error message is something like "not several points endpoint available.»

    Also in the network and sharing Center I am unable to turn on network discovery, turn on file sharing, enable printer sharing. The error message is: "the specified service does not exist as an installed service."

    What is the solution? Advisor. Thank you

    Hello MC2882,

    Please see the following article for more information on the replacement of Microsoft software, or contact the manufacturer of your computer:

Maybe you are looking for