Charge battery / charging not

I replaced the HP dv6 - 6090ee used battery with HP C62 battery (MUO6XL) (new) n serial: 6BUFV 3 M HK3L SM2. Part No.: 593555-001

10.8V 4910mAH

Plugged for (AC > adapter connected to the wall outlet) status will clogged the battery charge at no load and light load also change color from red to white some time on 20%, 45%, 65% and 95% fees remain in battery & after awhile even the status will plugged in charge & will light red, HPSA > troubleshoot > power, thermal and mechanical test result > OK status.

Is - this compatibility issue?

Kind regards

HP DV6-6090EE

SERIES No.:[personal information]
PRODUCT NO.: LM596EA #ABV
BATTERY: 6BUDU02SPZWL4Q (OLD) not any question about the load / don't load with old battery
ADAPTER: WBGTE0BHHZZD8U

Minhas

According to the guide maintenance & served, this isn't a battery that is compatible with your laptop.

Contact the vendor for a replacement that has a HP references I listed in my previous post.

Best regards
ERICO

Tags: Notebooks

Similar Questions

  • Battery is not charging and emptying while it is connected and in use

    Hello world

    I have a macbook pro 15 "mid-2015 retina, charge the battery only when the mac is sleep is deactivated or not in use, the battery status is normal and it takes about 8 hours to empty completely, but when it gets to 0% mac stops (no sleep) and won't turn on until battery is charging a little

    I bought a new magsafe2 on apple store 85W adapter, reset the smc and Landau, Polish ac port... nothing has worked...

    Because now I can't take it for repair, apple repair service are too far away from my town, my city, there are just apple store without repair service.

    What causes this problem?

    Here's the info of the battery:

    Battery information:

    Information model:

    Serial number: D865376Y578FWLKA6

    Manufacturer: SMP

    Device name: bq20z451

    Pack Lot Code: 0

    PCB batch number: 0

    Firmware version: 702

    Review of material: 1

    Review of cells: 3241

    Information on this charge:

    Charge remaining (mAh): 4607

    Fully charged: No.

    Loading: No.

    Full Charge capacity (mAh): 8586

    Health information:

    Cycle Count: 196

    Condition: Normal

    Battery: Yes

    Amperage (mA):-944

    Voltage (mV): 11478

    Parameters of power system:

    Alternating current:

    System timer (Minutes): 1

    Disk sleep timer (Minutes): 10

    Display sleep timer (Minutes): 10

    Wake up on the evolution of the ca: No.

    Wake up to the opening clamshell: Yes

    Wake on LAN: Yes

    Delay AutoPowerOff: 14400

    AutoPowerOff enabled: 1

    Current generator: Yes

    DarkWakeBackgroundTasks: 0

    View Sleep uses Sun: Yes

    GPUSwitch: 2

    Hibernation: 3

    PrioritizeNetworkReachabilityOverSleep: 0

    Waiting period: 10800

    Standby mode enabled: 1

    Battery power:

    System timer (Minutes): 1

    Disk sleep timer (Minutes): 10

    Display sleep timer (Minutes): 2

    Wake up on the evolution of the ca: No.

    Wake up to the opening clamshell: Yes

    Delay AutoPowerOff: 14400

    AutoPowerOff enabled: 1

    DarkWakeBackgroundTasks: 0

    View Sleep uses Sun: Yes

    GPUSwitch: 2

    Hibernation: 3

    Reduce the brightness: Yes

    Waiting period: 10800

    Standby mode enabled: 1

    Hardware configuration:

    UPS installed: No.

    Charger AC/DC Information:

    Connected: Yes

    ID: 0X0AA1

    Wattage (W): 85

    Family: 0 x 0085

    Serial number: 0x00b56abd

    Loading: No.

    First, I would try to isolate the problem. As is the shipper at fault or the MacBook.

    A simple way to test this is by plugging the charger into a MacBook so, if you have a.

    You can also check here If your adapter doesn't charge not your MacBook (retina, 12 inch, early 2015) and later - Apple supported

    And here, reset the management system (SCM) controller on your Mac - Apple Support

    Hope this helps, good luck to you.

  • Mac pro (2014) battery is not charging

    I met a problem for battery does not charge when one day when I opened the Mac Pro 13 "(mid of 2014)."  So I called Apple support for like reset the SMC, another MagSafe adapter, it seems still couldn't work.  I checked the battery information that seems good, but still was not able to load. Any help/input would be greatly appreciated.

    (1) connect the adapter when the Mac pro will turn on automatically;

    (2) where plug on the adapter, the Mac Pro turns off.

    (3) using the "Option-battery icon" show "Condition: Normal ';

    (4) information below looks like battery is ok, but could not load:

    Model name: MacBook Pro

    Model identifier: MacBookPro11, 1

    Processor name: Intel Core i5

    Battery information:

    Firmware version: 702

    Review of material: 000D

    Review of cells: 379

    Information on this charge:

    Charge remaining (mAh): 3043

    Fully charged: No.

    Loading: No.

    Full Charge capacity (mAh): 6067

    Health information:

    Number of cycles: 140

    Condition: Normal

    Battery: Yes

    Amperage (mA): 0

    Voltage (mV): 11540

    Charger AC/DC Information:

    Connected: Yes

    ID: 0 X 0921

    Wattage (W): 60

    Family: 0 x 0085

    Loading: No.

    Please take the computer to the Apple store to have the computer checked.

    The Genius Bar reservation:

    http://www.Apple.com/retail/Geniusbar/

    Best.

  • Camileo X 150-battery will not charge

    Hello all - I bought a camcorder Camileo X 150 nine this week. The camcorder only has power when it is connected to the power adapter or the USB cable. I tried to load it on Friday, had died eight hours, came back and the battery still had no power. Then last night I load from one day to the next, still no power this morning.

    I tried everything to implement but it still does not power upward only when connected to AC or USB - maybe the battery is faulty or I do something wrong?

    I would appreciate any help with this issue.

    You did not... something wrong to charge the battery, you must connect the power adaptor only... then the battery should start loading...

    But it might be possible that the battery is discharged deeply (empty), and in this case, the adapter must be connected at least 24 hours...

    Then, check again, and if the battery would not charge even if the AC adapter is connected to a longer period of time, get in touch with your dealer camcorder...
    Maybe the battery / camcorder is faulty.

  • Satellite X 200-battery will not charge

    Hello

    I have a Satellite X 200 for 2.5 years now, and now that my I just noticed that my battery will also charge the driving battery is not on. I turned off the computer and opened it again and I noticed the battery led turns on for like 3 seconds then goes back again.
    Is this a vista problem, a problem of battery or motherboard?

    Because with the ca on the laptop works very well. Any ideas how to make sure that if it a battery issue?

    Thank you

    Hi blackmodjo,

    What happens if you connect the AC/DC adapter, while the laptop is turned off? The battery will be charged or not?

    If this isn't the case, it seems to be a malfunction of the battery. It s already 2.5 years that you wrote and the battery can be charged only up to 500 times. After that, it must be replaced.

    New battery should t be so expensive. Just ask a service provider allowed in your country, and guys will help you to get a new one.

  • Satellite L655 - battery will not charge

    Hello

    Can you help me please? my battery is not Toshiba Satellite L655, I buy my warranty ended last year.

    Whenever I have to remove the battery and put it in then the battery is in charge, the led for battery get yellow until it completes then the flashing of the led stop and if I unplug the power supply is working well but it won t load if I plugged in until I have remove the battery again.

    Thanks for help

    Hello

    I think that the new battery must be tested, but before you do make sure you use the latest version of the BIOS
    I mean its battery problem or electronic books power supply and before portable s equipment is turned on, the laptop must be tested using the new pile of work well.

  • Battery does not charge, but by Satellite Pro L510 is running in battery mode

    Hi, I had a few odd battery problems these days:

    I had charged my laptop completely to 100% and then used it on the train on my way home (in Windows 7 64-bit), how I got it to about 70%, shut down normally, put it in my bag and left there until I got home. When I got home, I tried to turn it on but it lights and battery light orange blinking indicating that there can be no charge. I plugged it in and it worked as usual (Linux), so don't think too hard on this subject.

    Later I realized that the battery was still the load after longer that it should have been and running the acpi + (linux) command told me has the battery + charge, 0%, charge at the zero rate - will never fully charge. + I disconnected to see if it worked, and the battery lasted as usual, although always it's 0% charge rate.

    I started in Windows 7, and the battery reported that it was at 68%, so I assumed it was back to normal. A while later, I noticed that he was still 68%, despite having connected for a while - at least an hour. Start on linux, acpi showed data battery normal search, except that it was 'blocked' to 68%.

    I disconnected the laptop and run it as usual, and it ran until he cut; I guess with him out of power. I plugged it back in and it is 'charge' again, even if it is still 0% battery and "load at the zero rate".

    Before all this happened, the battery works well - apparently to 94% of its capacity. It would be modified for a few hours unplugged play movies or games.

    Summary: PC laptop battery suddenly going to works "attributed to the zero rate" and 0% complete; battery still seems to work very well, seems fresh and portable no power plugged in but the battery is not 'charging' or have his percentage of charge remaining increase.

    Someone at - it ideas? I have yet to try a BIOS update, but it seems that there is one available, so I will give that a try. I feel that the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.

    Thank you!

    Hello

    I think you should try upgrading the BIOS
    BIOS default value, and then try to charge the battery again.

    > get the impression, the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.
    Well, it of really difficult to tell if the battery or the mobo may be affected
    In my opinion, the battery must be tested without a doubt

  • My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

    My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

    When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

  • Battery will not charge on Satellite M35X-S349

    Hi, after attaching the DC Jack, which has been broken, the battery did not. When I plug my power adapter (orange) rest charge light lit for 5 seconds, then turns off. The computer can operate without the battery (AC adapter is plugged). When I turn the computer and measure the voltage of the pins going to the battery (no battery) I measure from left to right: terrestrial, 5, 7V, 5, 7V, 0 v, 3, 8V, 3, 8V, 1, 7V. So there seems to be enough voltage to charge the battery.

    My question is my fault for battery, is it possible that the charging circuit is defective, or did I not solder the correct DC connector (is this possible when the computer works without a hitch of the AC adapter / CC).
    Thank you Olafur

    Hello

    I m not a technician but I think it of possible that you have something wrong.
    According to your assignment on pin 3 is without power. This is a problem.
    Without any detailed motherboard tests it s not easy to say what's wrong.

    I think that the technician who has more experience in these issues should check the laptop. Unfortunately, without a diagnosis it s not possible to know what s wrong.

  • Connection charger not charging battery

    connection charger not charging battery

    "Connecting to the charger" - do you mean the adapter?

    The phone load using a computer USB ports?

    Have you tried a different adapter?

  • My macbook pro battery will not hold a charge

    My macbook pro battery will not hold a charge. I took in an Apple reseller and claimed him install a new battery. He said that my battery was still good. I asked him to install a new battery just to have a brand new machine. With the new battery installed, the computer still will not hold a charge for very long. I got the Apple dealer and he ran several tests without conclusive results. I always have a laptop that will not hold a charge and must be connected to use for any period of time. Can anyone offer a solution? Thank you.

    Try a reset of the SCM.  System sometimes forget the management of his own material. Reset the management system (SCM) controller on your Mac - Apple Support

  • HP dv6 Envy: battery, do not charge, the light goes blue/red then off

    Slowly, the battery started not charging, the day before he arrived he was in charge, but that once plugged waiting a bit with it, or I have to turn it off and keep the adapter to plug again. In its sequel, the light is not on to signify the load and it does not charge. When the laptop is turned off and I plug in the power adapter, it goes to a blue light, red light, then in the same model, do not at all support. I wonder if there is a problem with the battery, solder or simply the motherboard itself. I tried a new power supply and took out the battery, when its plugged in without the battery, pressing the button power turn on turn on for a second, but it used entirely and the charging light will also turn off when it turns off, but immediately return to solid when its completely off with battery blue.

    Hi @ActingDemicky,

    Do you have completely replaced the power adapter, power cord and I tried to plug different?

    Try the procedure described in this document to see if they solve the problem:

    Win 8 and 10: http://support.hp.com/us-en/document/c03513214

    Thank you

  • Satellite A300 - 15 d-battery will not be charged

    I have the Satellite A300 - 15 d. The problem is when I plug in the power adapter for the laptop battery icon become (undetected) what is the problem?
    Note: This battery is new and the charger not charge this battery. Also, when I plug-out the bifurcation of computer charger after a few seconds.

    Please help me on this problem...

    Thank you best regards &,.

    Dr. Ahmed

    Hey Buddy,

    I put t know why you have a new battery, but what happens if you try to load the battery. It work?

    In other words, it s a bad battery or the perception of control over the work of mainboard doesn t.

  • Satellite A300-1BZ - new battery does not charge

    Hello

    I bought a new battery (PA3534U-1BRS) because my old battery (3 years) hold office as well as it should!
    The new battery will not charge, the Red battery light suggesting everything of fine, but then begins to Flash after 20 minutes.
    When I turn on the computer the battery indicator on the taskbar in Vista tells me the device is turned on, but the battery won't charge.

    The company where I bought the battery has issued me with a replacement, but I'll always have the same problem.
    They have listed the battery as a genuine, and there any labelling even as my old battery.

    The battery would be false or toshiba has changed the specifications of this battery in particular.
    The reason for my last statement is the fact that my old battery contacts look more apparent than those on the new.

    I have no reason to believe that the company is not kosher because I returned the first battery to address personally after realizing that they were on my doorstep!
    Fake or not compatible?

    The comments appreciated.
    Thanks in advance!

    Hello

    Maybe you used the battery is not compatible, but AFAIK the PA3534U-1BRS is designed for Satellite A200 A300 L300 L300D
    So it should work.

    However, I recommend buying a battery of origin of Toshiba ASP.

    Contact a local Toshiba authorized service partner and order a new compatible battery for this laptop.

    I think the new battery should work.

  • Satellite L655 new battery does not charge

    Satellite L655 new battery does not charge

    Hello halik

    It is not easy to say what the problem is here.
    Purchased new and original Toshiba battery with the same part number (model number).

    New battery is recognized by the system?

  • Satellite L50T-A196 battery not charge not after 10 win upgraded

    Hello

    I just updated to Win10.

    I noticed that the battery does not charge and when I unplug the power supply laptop switches off do you think it is software problem?...

    I have the laptop for two and a half years now... the battery is dead and need to be replaced? or can I fix it?

    and if it needs to be replaced where can I buy original battery online?

    I just updated to Win10...
    I noticed that the battery is not

    Does the battery charge before the upgrade?

    Try this workaround:

    Go to Device Manager, expand the batteries then uninstall/remove Microsoft ACPI compatible control method battery.

    Reboot the laptop.

Maybe you are looking for

  • How do DAQmx tasks work on several DAQ devices

    I created tasks of temperature on cDAQ1 on my development PC.  I moved this DAQ system to the laboratory as well as an executable file.  I connected cDAQ2 to my development PC and none of the tasks that I created will work on this system since all ch

  • cannot read CD / dvd

    Equip computer dvd nothing happens and cannot enforce.  just moved so had to have computer hooked up again

  • My L7650 networking

    I have a printer L7650 all in one that I have attached to my network. I can put the network address (192.168.10.127) and get the printer control and information. However when I try to install it as a cable setup cannot connect to the printer. I have

  • BlackBerry 10 What's the difference between BB10 London and Liverpool?

    What is the difference between BlackBerry London and Liverpool BlackBerry? I have a hard time with this. Thank you!

  • Is there anywhere I can find this wallpaper?

    I have recently reinstalled windows 8 for my hp laptop but lost my desktop background by doing this. Can someone find me one of these in 1600 x 900. http://pcdoctorardee.com/wp-content/Gallery/Hewlett-Packard-backgrounds-Pavilion-G6-Windows-8/backgr.