Charger Compaq 610 problem
Hello, laptop Compaq 610 arrested son loads and then died when the battery ran low. I read the adapter 18vdc, it seems OK. I read that the plug that connects the charger to the system board, sometimes comes loose, then I opened the unit upwards, seems OK. Any thoughts on what could be the problem?
Also noticed that the cable between the charger and the laptop has 3 sons, but the connector seems to have 2 connections, which is the third wire for? A schema is available anywhere?
Thanks for any advice.
OUTPUT of the adapter goes to "0".
You have a short.
I wonder if there could be a plug in the switch on the plug of the adapter and could have shorted contacts.
Tags: Notebooks
Similar Questions
-
charging battery Compaq 610 problem
my new coulden can't battery load more then 32% which is the problem. problem of battery or load? help please
Hello
1. have there been recent changes to the computer before the show?
Check your connections. Make sure that the plug is tight in the port. You may have a bad connection on the end of power cord. This is usually port that lets you connect the power cord to the laptop.
Method 1: Also I suggest to check the following links and check if it helps.
un) the problems of power consumption and extend the life of laptop battery: http://support.microsoft.com/mats/windows_battery_power_settings/en-us
b) Solutions to common battery problems: http://windows.microsoft.com/en-US/windows7/Solutions-to-common-battery-problems
For your reference: Taking care of your laptop battery
http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery
Hope this information is useful.
-
charger and battery compaq 610
Hello..
I bought computer mmy notebook compaq 610 in 2009...
my laptop battery backup is now 0%. n nw evn my xharger does not work correctly...
charger is ok... can b d connetcting locations are damaged...
can I get help to find out how much it'll cost me to maintain my Matthew and if I had to change the battery...
how much it'll cost to get the new battery?
Please help me...
I need to examine it to see if there is a problem with the port of loading, but a really dead battery can make it seem as if the charger is not working properly. If you can describe the problem maybe we can further troubleshoot the power adapter. If you are willing to accept a non-genuine "compatible" battery, they are very cheap.
New but real shipped from China
New authentic in the United States
New "compatible" United States
A wide range of choices.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Problem with stop on HP Compaq 610
Hello!
I have a problem.
My computer - HP Compaq 610 with Vista Home Premium installed - when I go on the computer stop is not going stop but restart after a few seconds.
When I use Hibernate is workin corectly.
What is the solution for this problem?
Please excuse me for my bad English.
Thank you
Aleph
NVM
BIOS update + update of the gigabit ethernet driver
then disable the wake on lan in the BIOS and XP (-> network-> advanced nic Device Manager)
stop now ok.
-
Compaq 610: forget my password of market
Hello
I forget my password of my bios market, and when I try 3 times, I don't get any code, but I had this (*).
Compaq 610
[personal information]
Product: VC269EA #AB6
Model: CPQ610UT5870Q5X320MIBNCN22Fa
could you please help me!
I'll be very grateful.
Because you are not directly disable the code.
Try this post to see if that solves your problem.
-
Compaq 610 and WinXP install BSOD
Hello
I have laptop Compaq 610 with FreeDOS installed plant. By default, this laptop has 2 GB of memory, but I asked a 4GB that was installed in the store. I am trying to install Windows XP SP2 (32-bit version) for this laptop. However, I still get the blue screen of deatch during installation. The same thing happens when I tried to install WinXP SP3. This happens at the beginning of the install when the drivers are loaded and probably before trying to view the EULA. I ran all the tests that show HARD drive test in BIOS - memory, test. Also ran Goldmemory who has not detected any memory problem.
No idea what is the problem?
Thanks a lot for your help.
Abyss
Did you try slipstream ICH8 sata driver?
You have a computer laptop bussines it an option for the native functionality of disbale sata, have you used it?
-
ACPI\HPQ0006 driver for Windows 7 Professional 32 bit - HP Compaq 610 support
Hello! I have a problem with my HP Compaq 610, I have a problem with ACPI\HPQ0006, it appears in my unknown devices, any idea of what can it be? What is the driver of buttons Quick lunch?
ING. José Manuel VargasHello
The download link for the quick launch buttons is on the link below - download the installer and save it on your desktop.
Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation. Once done, restart the laptop.
Kind regards
DP - K
-
SD card is not recognized when I insert it. He used to work earlier, but due to a problem, I had to get it reformatted and now it has stopped working. There is no automatic detection for it. Also, I'm not able to determine if it is listed in Device Manager, not sure, under which entry, should I put to update the driver. I have laptop HP Compaq 610. Please suggest what all can be tried.
Your driver card reader should be under USB controllers. If she is not there, you've lost your license, or the drive has failed. Visit the Compaq website to get a new driver. If it still does not work, he probably missed and which is not uncommon.
You can buy a reader of SD cards for less than $10.
-
HP Compaq 610 ((Intel PVU): how to downgrade bios on Compaq 610?)
How downgrade the bios on Compaq 610? I got bios ver. F.20
I want BIOS version f.08!
-
Hello world!
Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?
(01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?
(02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?
(03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?
I'll be very grateful for any useful info! Respectfully, Tianuchka))
Hello:
I would use it to HP... the description tells you what it does.
The HP 6910P has the same controller and chipset as the 610 HP.
Who answers your questions first 2.
Regarding the 3rd, I don't know whether or not you notice an improvement.
If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.
Download, unzip and run the setup.exe file. Then restart the PC.
-
Compaq 610 fd battery replacement
I have my compaq 610 fd battery (6 cells, model no - REPLACEMENT-LB51) replaced by HP 6800 s / 6700 s 8-cell NB. Is it acceptable to replace the 6-cell 8-cell battery. Is there any type of risk the damage of parts
Hello
Each battery has a label with the information about it. Please check:
b physically mount, make sure that it will not cause damage to the connectors,
(b) voltage: must be the same or not more than 5% of both sides.
For power, normally a battery 8 cells is greater than a 6 cell battery and it's ok.
Kind regards.
-
HP compaq 610: I want to upgrade my ram and cpu
Hello
I have a laptop HP compaq 610 with a intel core 2 duo 2 GHz with 4 GB of ram and a 64-bit processor
It is therefore not good for games
now I ask you for the the hardware options available for the upgrade of my camera
I wanted to add a 8 GB of DDR3 ram and a 3 GHz cpu
so can I use RAM
and what are the cpu options can you give me
Thank you for your valuable time.
LoRdRedh wrote:
Thank you very much
It is just that this processor is not good for the games so I have any options?
You need to get a gaming laptop and those cost 2000US started playing HD games.
-
HP Compaq 610 laptop computer lcd cable
Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX. Sorry for my English...
K_Szabi wrote:
Hello, I have a laptop Compaq 610 laptop lcd screen cable is broken and I want to buy another. I would like to ask what kind of lcd cable should I buy? THX. Sorry for my English...
Hello
You can buy a complete kit under this part number: 538463-001
http://www.lambda-Tek.com/538463-001-HP-SPS-LCD-cable-kit~CS/B569917&viewSpec=y
Useful information be found here as a way to replace it etc...
-
I have HP Compaq 610, processor: Intel (r) Core (TM) 2 Duo CPU 2.00 GHz, RAM 2 T5870. 0 GB.
I want to increase RAM, then how many and which kind of Rams can I support my laptop
You are the very welcome.
If you are running a 32-bit operating system, you can use the Intel Chipset Identification Utility.
http://www.Intel.com/support/graphics/sb/CS-009245.htm
Or you can read the rest of the info on the page above to manually determine what chipset you have.
-
Hello
I need drivers for my laptop Compaq, Windows 7 32 bit computer.
Product name: Compaq 610
Thank you for your time,
Constantine.Hello:
Here is the link to the page of the W7 32-bit laptop driver...
http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=3958408&swLangOid=8&swEnvOid=4052
Maybe you are looking for
-
Windows appear on the taskbar, but won't focus, other 3 goes, only 1 that seems to be the main window is not found
-
Satellite Pro A200 (PSAF4A) - update CPU and chipset
Hello I have a Satellite Pro A200 (PSAF4A) with a processor Intel Celeron M 540 (1.86 GHz) and a Mobile Intel (r) 965 Express Chipset Family.I upgraded the RAM, but it's just not enough performance for me as its limited to 2 GB.I know that Toshiba wi
-
Satellite Pro A120: Corrupt registry - error code 19 Device Manager
I have a Satellite of A.120 Pro I am trying to charge my Creative Zen Sleek MP3 on it but keep getting a Code 19 registry is corrupted message in the Device Manager. How can I fix it
-
'LabVIEW 2010'.exe as a windows service running
Hi all years, I wrote an application with LabVIEW 7.1 and transformed into a Windows NT Service according to this NOR-tutorial. Now, I have a similar use case and I wanted to do the same thing with an application built in LabVIEW 2010. Somehow, it do
-
It is a product of refurb... does it affect my use? What are the seat of affect in a refurb product...