Charger MagSafe power off

Similar Questions

• The charge of the batteries of Smartphones blackBerry wise - Turn Off vs Full Power Off

  If I turn off my camera with Full Power Off, it will load more quickly than if I just use Turn Off?

  N ° but even if it does, the difference will be negligible.  I suggest to use the turn-off as opposed to full power in the distance, because some features, for example, alarm, still works with Turn Off but not with Full Power Off.

  I hope that helps you.

• unmatched iwatch of iphone and incorrect password (power off) gray of iwatch

  My iwatch is locked and it is showing the error "wrong access code open the Apple Watch app on your iphone, go to access code, then tap reactivate entry password to try again. I tried the hard reset, but it did not work. I can't reset the iPhone because it is non-matched and when I tried to reset to iwatch again then power off and power reserve options are grayed out.

  Can someone help me please?

  Hello

  Follow these steps to clear your locked Watch:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.

  Then re-pair shows your watch by using the app on your iPhone, choose to restore from backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• Bug: iOS 10, Siri invades even lock screen with power off

  iOS 10, Siri invades even lock screen with power off

  Since the upgrade to iOS 10 (iPhone 5 s) siri appears when I forgetting to unlock my phone because I'm not used to this way to unlock yet. But siri on lock screen is disabled in the settings. I can close siri all together, but I don't consider it as an option.

  Is this a bug in the iOS 10 or did I miss something?

  Hello nick_ve,

  Thank you for using communities of Apple Support.

  I see that since you have upgraded to iOS 10, Siri starts each time you try to unlock your iPhone and Siri on the lock screen is disabled in the settings. I completely understand, because when I upgraded, it took me a few tries to get adjusted to unlock with the Home key. I'm more than happy to help you with this.

  Press the Home button on your iPhone 5s once unlocks the screen, and freezes for more than one second will activate Siri. It is good to keep this in mind when you unlock your iPhone.

  There is also an alternative solution I would like to share with you. You can disable this option in settings > general > accessibility > Home button. Turn the finger remains open. You can unlock the iPhone with Touch ID without having to press the Home button.

  Have a wonderful day!

• AppleScript to disable auto power off

  Hey guys,.

  I was wondering if there was a way to disable the automatic stop for a mac using Applescript.

  Thank you.

  Mac OS: El Capitan

  MacBook Air early 2015

  What did you use to enable auto power off?

  Do you mean the stop programmed in system energy-saving Preferences?

• HP Color LaserJet M277dw MFP: Disable auto power off after inactivity for HP Color LaserJet M277dw MFP

  What is the purpose of mobile printing solutions if you cannot activate your home printer?
  My printer stop automatically after 8 hours of inactivity and therefore makes it impossible for me to use mobile printing. The printer is connected via WLAN (without active ports to stop the closing).
  In the configuration, there are only options to stop after 2, 4 or 8 hours. No option on disabling of automatic shutdown.
  Pls do that for the people who work on the firmware updates, they must include an option to disable auto power off, many people are already complaining that and nothing has changed so far.
  Its just illogical. You make big announcements for HP eprint and other stuff, but your printers are not able to do so even if you could theoretically make eprint if your standing next to your printer all day.
  I just got this printer pluged and installed and already tired of this BS!
  I know that there is no solution, so just send it to the people who can change it.

  for all of you who read this post, I was in contact with the technical team of HP and they said that they don't give you the ability to disable auto power off on purpose, it is HPs energy-economy-policy to do and there are no plans to change this in the future
  in my case, I only WLAN's, yet is not automatically stop (although it should be), I guess I'm lucky that my router it ping every now and then and is therefore not stop
  If you can't fix it yourself with active ports and may not have at all, it will probably not option left than the back of the printer

• Is it possible to stop auto power off while downloading?

  Is it possible to stop auto power off while downloading?

  Can you please be more specific with your problem?
  What model of laptop do you have?

  What happens exactly and when?

• Satellite A660 - player optical power: OFF

  I have an A660 and I'm doing a system repair disc, but the message "Windows has not found that a CD/DVD burner rises. I also noticed that the icon on the right side of the taskbar indicates that the "Optical Drive Power: OFF '.

  I am running Windows 7. I think it may be a setting outside the energy saving eco utility.
  Someone please offer little help on this it would be much appreciated.

  Thank you.

  Hello

  By pressing FN + TAB turns the power of the STRANGE power or eject disc tray... Try this...
  If this does not work, check the Toshiba ODD utility

  All programs-> Toshiba-> CD & Applications DVD

  Welcome them

• Pavilion 15: Power off

  I have to use the shift with off switch key (on windows 8) to power the laptop off, if I use only only its turning off the display only, but is always cut power off button.

  Hello

  Try disabling the hybrid Windows 8 start - you can do the following.

  Right-click the battery icon, and select Power Options.  In the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows and check if the laptop will now be shut down properly.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• Please explain power off icons

  On a 10 B8000 Yoga, when I choose to turn it off, I get a window which displays three lines:

  > Power off

  > Airplane mode

  and the third line has 4 icons:

  > a speaker with an X.

  > a tablet with two wavy lines,.

  > a speaker with two concentric arcs.

  > and two trees.

  I think that I understand the first 3, but what the heck are the two trees for?

  I tried to select and cannot tell any difference in the operation of my tablet.

  (Btw, I called Lenovo support with this question THREE TIMES and after speaking to FOUR rehearsals and lots and lots of waiting time, nobody knows the answer, most don't know what screen I hate...)

  exilio wrote:

  On a 10 B8000 Yoga, when I choose to turn it off, I get a window which displays three lines:

  > Power off

  > Airplane mode

  and the third line has 4 icons:

  > a speaker with an X.

  > a tablet with two wavy lines,.

  > a speaker with two concentric arcs.

  > and two trees.

  I think that I understand the first 3, but what the heck are the two trees for?

  I tried to select and cannot tell any difference in the operation of my tablet.

  The speaker with the mutes the audio with vibrate mode off X.

  The tablet with two wavy lines on mute, but turn on vibrate mode.

  The pregnant with two arcs UN-mutes the audio and turns off vibrate mode.

  I don't know what the "two trees" icon is.

• Re: Satellite L350D-131 keeps power off during use

  I got my Satellite L350D-131 28 days and it's been great, but on the last 48 hours I tried to add music to my laptop for when I go to college next week.
  But he keeps turn off use environment, there is no consistency about why it's power off.

  Can anyone help?

  Hello

  It is new laptop and something like that should not happen under normal circumstances.
  The question is how you use your laptop. If the laptop is placed on the bed and the cooling fan is blocked I guess this happens due to overheating.

  The laptop is placed on the desktop when this happens?
  Are you sure that the underside cooling fan is not blocked somehow?

• 4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• HP Officejet 4630: HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected

  HP 4630 gets printer fault. Must cancel doc, power off the printer, then restart. There is WI - FI connected.

  It then prints until I have change entry. Then it occurs and stop and restart is necessary.

  FAX and SCAN properly.

  Hello

  Thank you for using the HP Forums. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• Vista Home Premium, is stuck on the message "Please do not power off or unplug your Machine." Installation of update 1 of 1... ». Now what?

  Recently, I applied the latest service pack for the 32-bit version of Vista and have had frequent accidents of Internet Explorer. Today, he seems to have done an automatic update (that he did, and did often in the 3 years I've owned the computer). But he is frozen on the screen that says do not do "power off or unplug... installation update 1 of 1. It's a little scary, and I don't know what to do.

  I ran windows defender scan yesterday and the system was clean. Basic security hang after about 2/3 of green square were lit.

  Of course, I write from another machine.

  MartyM777,
  Take a look at this article and try the items on it.  So, let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer is stuck on the 3/3 update, and even if I force power off and restart, that just guard on that happening. What can I do?

  I run windows vista on my pc, and every time that I turn it on, it just sits on the 3/3 update and will not progress. Even when I force my PC to power off and restart it, it continues to be. The first time he tried this update, I have dropped about 3 hours and returned to the configuration to update: stage 3 of 3-0% screen. Since it always happens. My pc is unusable because of this. What can I do?

  .. .my computer came pre-installed with vista, so I do not have a disk

  Not that I recommend a repair install, but the manufacturer was required to provide a way to reinstall Windows. If the computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to reinstall Vista.

  Assuming that Vista SP2 is not installed, I recommend you open a free support incident, NIC. See the link in my previous answer. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft