chart or table with the date

Similar Questions

• Best way to generate a record per day from a table with the dates of the FEP/exp

  Hello
  
  A table equipped with various attributes and a date of eff and exp. for example Attributeto, 05/01/2012, 16/05/2012
  
  We want to create another table in this table for a record per day. for example 16 documents.
  
  What is the best way to achieve this in OWB?
  
  Thank you

  Assuming that you have a calendar table, then you can reach your rate table corresponding to the date table schedule between the table rates start date and end date.

  Something like:

  Select a.rate, rate_table b., calendar_table b.
  where b. between a.start_date and a.end_date

  should translate easily into a join of two tables in OWB?

  Concerning
  User909022

• I can add a column to an existing table with the data.

  Hello
  
  I'm working on
  The Version of database: Oracle 9i
  
  I can add a column to an existing table that already has data with below given command.
  
  ALTER TABLE table_name
  ADD the definition of the column_name column;
  
  Kind regards
  John

  Add to that:

  If your new column is NOT "null", you need the task in 3 steps:

  1. Add the column without a NOT NULL constraint
  2. the default value of the new column added.
  3. Add the NOT NULL constraint in the new column.

  concerning
  AJ

• DM 4.0.0.833 and synchronization with the data-> TABLES DROP dictionary

  Hello

  I have a DataModeler physics implemented in Oracle database, I drop a table of data in DM maker 4.0.0.833.

  The database with the data dictionary synchronization and does not detect that you have deleted a table.

  
  Is this a bug? Or am I something wrong?

  
  

  Thank you
  

  Please mark the thread as answered if answer has helped you to solve the problem.

  Thank you

• How to export data to excel that has 2 tables with the same number of columns and the column names?

  Hi everyone, yet once landed upward with a problem.

  After trying many things to myself, finally decided to post here...

  I created a form in form builder 6i in which clicking on a button, the data gets exported to the excel sheet.

  It works very well with a single table. The problem now is that I cannot do the same with 2 tables.

  Because the tables have the same number of columns and the columns names.

  Here are the 2 tables with column names:

  Table-1 (MONTHLY_PART_1)	Table-2 (MONTHLY_PART_2)
  SL_NO	SL_NO
  MODEL	MODEL
  END_DATE	END_DATE
  U-1	U-1
  U-2	U-2
  U-4	U-4
  ..........	........
  ..........	........
  U-20	U-20
  U-25	U-25

  Given that the tables have the same column names, I get the following error :

  402 error at line 103, column 4

  required aliases in the SELECT list of the slider to avoid duplicate column names.

  So how to export data to excel that has 2 tables with the same number of columns and the column names?

  Should I paste the code? Should I publish this query in 'SQL and PL/SQL ' Forum?

  Help me with this please.

  Thank you.

  Wait a second... is this a kind of House of partitioning? Shouldn't it is a union of two tables instead a join?

  see you soon

• the selection of all colomns_names of a table, with their data types...

  HI :)
  
  I would like to know, how to select in SQL for all the names of columns in a table with their data types so that I get something like this:
  
  Table 1: table_name
  
  the ID of the column has the NUMBER data type
  the name of the column has Datatype Varchar2
  *....*
  
  --------------------------------------------------------------
  
  Table 2: table_name
  
  the check in the column has the NUMBER data type
  the air of the column has Datatype Varchar2
  *....*
  
  
  and it must be for all the tables that I own!...
  
  P. S: I'm trying to do this with java, so it s would be enough if you just tell me how to select all tables_names with all their colums_names and all their data types!...
  
  Thanks :)
  
  
  
  I've heard this can be done with USER_TABLES... but I have no idea how: (...)
  
  Edited by: user8865125 the 17.05.2011 12:22

  Hello

  USER_TAB_COLUMNS data dictionary view has a row for each column of each table in your schema. The columns TABLE_NAME, COLUMN_NAME and DATA_TYPE contains all the information you need.
  Another view of data, USER_TABLES dictionary, can be useful, too. He has a line of table pre.

• How to compare the length of the data to a staging table with the definition of the base table

  Hello
  I have two tables: staging of the table and the base table.
  I get flatfiles data in the staging of the table, depending on the structure of the requirement of staging of the table and the base table (length of each column in the staging table is 25% more data dump without errors) are different for ex: If we have the city long varchar 40 column in table staging there 25 in the base table. Once data are discharged into the intermediate table that I want to compare the actual length of the data for each column in the staging table with the database table definition (data_length for each column of all_tab_columns) and if no column is different length that I need to update the corresponding line in the intermediate table which also has an indicator called err_length.
  
  so for that I use the cursor c1 is select length (a.id), length (b.SID) of staging_table;
  c2 (name varchar2) cursor is select data_length all_tab_columns where table_name = 'BASE_TABLE' and column_name = name;
  But we get atonce data in the first query while the second slider, I need to get for each column and then compare with the first?
  Can someone tell me how to get the desired results?
  
  Thank you
  Manoi.

  Hey, Marco.

  Of course, you can set src.err_length in the USING clause (where you can reference all_tab_columns) and use this value in the SET clause.
  It is:

  MERGE INTO  staging_table   dst
  USING  (
         WITH     got_lengths     AS
                   (
            SELECT  MAX (CASE WHEN column_name = 'ENAME' THEN data_length END)     AS ename_len
            ,     MAX (CASE WHEN column_name = 'JOB'   THEN data_length END)     AS job_len
            FROM     all_tab_columns
            WHERE     owner          = 'SCOTT'
            AND     table_name     = 'EMP'
            )
       SELECT     s.ename
       ,     s.job
       ,     CASE WHEN LENGTH (s.ename) > l.ename_len THEN 'ENAME ' END     ||
            CASE WHEN LENGTH (s.job)   > l.job_len   THEN 'JOB '   END     AS err_length
       FROM     staging_table     s
       JOIN     got_lengths     l     ON     LENGTH (s.ename)     > l.ename_len
                           OR     LENGTH (s.job)          > l.job_len
       )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  As you can see, you have to hardcode the names of the columns common to several places. I swam () to simplify that, but I found an interesting (at least for me) alternative grouping function involving the STRAGG user_defined.
  As you can see, only the subquery USING is changed.

  MERGE INTO  staging_table   dst
  USING  (
         SELECT       s.ename
         ,       s.job
         ,       STRAGG (l.column_name)     AS err_length
         FROM       staging_table          s
         JOIN       all_tab_columns     l
        ON       l.data_length  < LENGTH ( CASE  l.column_name
                                            WHEN  'ENAME'
                                  THEN      ename
                                  WHEN  'JOB'
                                  THEN      job
                                     END
                             )
         WHERE     l.owner      = 'SCOTT'
         AND      l.table_name     = 'EMP'
         AND      l.data_type     = 'VARCHAR2'
         GROUP BY      s.ename
         ,           s.job
         )     src
  ON     (src.ename     = dst.ename)
  WHEN MATCHED THEN UPDATE
       SET     dst.err_length     = src.err_length
  ;
  

  Instead of the user-defined STRAGG (that you can copy from AskTom), you can also use the undocumented, or from Oracle 11.2, WM_CONCAT LISTAGG built-in function.

• Fill a table with the results of the refresh groups

  Hello world
  
  I need a little help.
  
  I'm working on an Oracle 10.2.0.4 on windows.
  
  I have a table I created like this:
  Table name: DIM_REPLICA
  
  COD_SEZ VCHAR2 (2)
  NOME_SEZ VCHAR2 (20)
  FLAG TANK (1)
  DATE OF D_REPLICA
  
  This DB I have 210 discount groups running every night. I need fill this table with the results of the refresh groups.
  
  So when the refresh for example called ROME group runs I need to write on the table the name ROME in the field "NOME_SEZ", a Y or N if the refresh Group has worked in the field of the INDICATOR and LAST_DATE refresh force ran into the field of the D_REPLICA. The COD_SEZ field is a code that I get other things. It is not necessary for the moment. I can add it myself on my own.
  
  Can someone help me please?
  
  I was looking on the tables SYS DBA_JOBS and DBA_REFRESH these data, but I don't know what to take and how to fill the table. Trigger? Procedure? Any help will be great!
  
  Thank you all in advance!

  This forum is for SQL * PLus, questions and your question is about general issues Oracle. You will get a better response by posting your question in another forum - probably the General database instance.

  Please close this thread and start over in another forum.

• How to make a list of question field with the data type DATE?

  I have a column with the DATE data type. Using forms 6i I want to generate a poplist field of list item with this column while the value of the items in the list of names of days like SATURDAY, SUNDAY, MONDAY. If we change the date to a char data type, it won't work properly, but now with the data type DATE behind him, it gives the following error message
  
  "FRM-32082: invalid value for given the type of element."
  List WEEKREST
  Article: WEEKREST
  Block: EMPRESTS
  Form: module 3
  FRM-30085: unable to adapt to the shape for the release. »
  
  
  Using forms 6i how a list item field type DATE data which may contain names of days?

  Set your date as a hidden field (not shown) column. Create your item list with the names of day of varchar2. Create the list item as a base table field that accepts the values of text in the names of the days. On this area, create a when-validate-item trigger that translated the text into an actual date that it then uses to set the value of the real object of the base table.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Comparing converted text until then with the Date column

  I have a question where I need out of a text column in a date format and then compare this column against another column in the same table, which is already to date format. I tried to use a sub query to avoid doing this in two steps, but get a:
  
  "ORA-01858' a non-digit character was found here where was waiting for digital"
  
  error message that obviously has something to do with the date formatting in the subquery: the types do not match.
  
  Note: clock_num is a text column and contains the numbers are supposed to be dates like 070111 - where the need for conversion to a date type to match the stat_date which is the type of date column. I have no control over the data in this column. It is not my picture, is the picture of the society and I have to use!
  
  So my question is what syntax/function should I use to get the type of expression clock_nbr the type of eff_date.
  
  Or y at - it another way to do the same thing without using subquery?
  
  Any help is appreciated...
  
  SELECT
  me. SSN,
  Of
  member_enroll me
  WHERE me.ssn = '999999999'
  AND me.stat_date <
  (SELECT to_date (substr (me.clock_num, 1, 2) |)) » /' || substr (me.clock_num, 3, 2) | '/' || substr(me.clock_num,5,2), 'mm-DD-yy') as clock_nbr
  OF member_enroll me
  WHERE me.ssn = '999999999')

  I have no experience with PL/SQL Developer. Any chance you could launch SQL * more and copy / paste of a session where you run this code?

  You should only run the DDL to create the function once. If the second query runs, you have managed to successfully create the function. My hypothesis is that whatever 'window SQL' you are talking about and what you mean by 'run' is the cause only the function must be created. Most of the IDEs have a function to execute current SQL statement, without taking into account other statements that can be registered in the same window, and a separate function to execute all instructions in the current window. Different iDEs have different requirements to separate several SQL statements if you want to run all of the SQL statements in a window. You may need to do something like the added statement a / after the CREATE FUNCTION as a separator.

  Justin

• data from 3 tables with later dates

  Hello
  Need help with the PL/SQL code, I need to write a code that will get the data from 3 tables with the most recent date.
  
  For an individual ACT_CODE the output of the SQL query should display the data including the last dates back to 3 tables, if there is no
  Date of the table, it should show the remaining data (think that the left join will do here)
  
  Names of tables:
  Institution_UPDT aiu
  AC ASQ_CONTACT
  GR_AUTHORIZE gr
  
  All 3 tables have ACT_Code in common
  
  Column names
  
  INSTITUTION_UPDT IAU - IAU. ACT_CODE, AIU.project_id as proj, IAU. UPDT_TYPE_ID, IAU. User_id, IAU. UPDT_DATE
  
  ASQ_CONTACT ac - ac. ACT_CODE as contact_code, ac.project_id, ac.first_name, ac.middle_initial, ac.last_
  Name, AC.title, AC. Status, AC.status_date
  
  GR_AUTHORIZE gr - GR ACT_CODE as grad_code, gr.name, gr.title AS grad_title, gr.submit_date
  
  
  Are the names of the columns date
  AC.status_date,
  IAU. UPDT_DATE and
  Gr.submit_date
  
  Thanks to you all
  appreciate your help
  
  Jesh

  Hi, Ngoumba,

  If a given ACT_Code couldn't miss from any of the tables, then you will use better full outer joins, not a join left outer.

  Perhaps it would be more effective to make a UNION of the three tables, then rotate the results in three datecolumns.

  You can use the GROUP BY aggregation to get the last date for each ACT_Code in each table.
  If you need other columns in the row which is the last date, you can use the ROW_NUMBER analytic function, like this:

  SELECT  ACT_Code
  ,     updt_date
  ,     ROW_NUMBER () OVER ( PARTITION BY  ACT_Code
                            ORDER BY          updt_date     DESC
                    ) AS r_num
  FROM    institution_updt
  

  The lines with r_num = 1 are the most recent

  This is a technique of ot the UNION-PIVOT example:

  WITH     union_data     AS
  (
       SELECT    ACT_Code
       ,       MAX (updt_date)     AS last_date
       ,       1                  AS table_id
       FROM       institution_updt
       GROUP BY  ACT_Code
  UNION ALL
       SELECT    ACT_Code
       ,       MAX (status_date)     AS last_date
       ,       2                  AS table_id
       FROM       ASQ_Contact
       GROUP BY  ACT_Code
  UNION ALL
       SELECT    ACT_Code
       ,       MAX (submit_date)     AS last_date
       ,       3                  AS table_id
       FROM       GR_Authorize
       GROUP BY  ACT_Code
  )
  SELECT       ACT_Code
  ,       MAX (CASE WHEN table_id = 1 THEN last_date END)     AS aiu_updt_date
  ,       MAX (CASE WHEN table_id = 2 THEN last_date END)     AS ac_status_date
  ,       MAX (CASE WHEN table_id = 3 THEN last_date END)     AS gr_submit_date
  FROM       union_data
  GROUP BY  ACT_Code
  ORDER BY  ACT_Code
  ;
  

  Published by: Frank Kulash, on September 16, 2009 15:02
  Added UNION-pivot example

• It is possible to have two tables with the same name in Oracle!

  Oracle Version: 10 gr 2
  
  MS Access 2007, I had to use the 'Export' by which I copy a table (and its data) to an Oracle schema via an ODBC connection. Later, I realized that, during the copy of tables with a mix of lower and upper case names, the table does not copied (exported). But MS Access will give you the message that table obtained export successfully.
  
  MS-Access mess around Oracle data dictionary.
  
  When you issue

  SQL>select * from tab;
  
  TNAME                          TABTYPE  CLUSTERID
  ------------------------------ ------- ----------
  AMStates                       TABLE
  Version                        TABLE

  You will see the names of the tables. But when you try to DESCRIBE or SELECT this table, you will

  SQL>desc Version
  ERROR:
  ORA-04043: object Version does not exist

  You can even create another table with the same name in the schema

  SQL>create table VERSION (X NUMBER);
  
  Table created.

  Why this is happening and how can I bring these items 'non-existent '?

  Hello

  Use

  SQL > desc 'Version '.

  Or

  SQL > select * from 'Version '.

  Or

  SQL > drop table 'Version '.

  To overcome the problems of mixed-case.

• See the time with the date in the cell?

  How do you not see time with the date in a cell? I tried all the settings I can find but without success.

  Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6

  I don't want to see that 12:00:00 AM

  

  Hi Russ,

  Inspector to format > cell, the parameters as shown below:

  

  Kind regards

  Barry

• Print an e-mail with the date of the transmission

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  anniesol said

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  Problem is now solved! Choose the print option 'other measures' dropdown list allows email to be printed with the date of the shipment.