Check boxes are displayed incorrectly < input type = "checkbox", "checked" > in 4.0.1 when they are fine for the same page in 3.6.17

Similar Questions

• Field containing average function works only when the data are engaged on the same page. Does not work for fields on other pages.

  I'm having a problem with a field defined to calculate the average of eleven points fields (points 1 to 8 on page 1-9-11 on page 2). My original question was that it could exclude fields of points when they do not have information entered and adjust the average calculation (number of "divided by") accordingly.

  I had someone write JavaScript code for him, but I just found a small problem I don't know if it's something in the code or what the person who originally wrote the script cannot understand it either and suggested that I have post here.

  The middle area (located on the 2nd page of the pdf page two) seems to work exclusively with precision if at least one of the points of the fields on the 2nd page, 9, 10 (and 11) are engaged with the data. No values entered on the first page and only the first page, are for some reason any dividing by a more than expected. For example, if I fill the boxes 1, 2 and 3, it divides the total by four. If I filled just box 7, it halves. If I fill all 8 boxes on the 1st page, it divides by nine. It is corrected as soon as I get the points in one or more of the three boxes on the 2nd page points, suddenly the overall average is accurate. But if boxes 9, 10 and 11 contain no points, then the average is still inaccurate because the number of ' divide by "he uses is one more than what it should. I can't understand how to attach the form to this post, so I downloaded on Dropbox: Dropbox - used Evaluation.pdf.

  Under the direction of State: javascript came work to exclude the empty boxes when the points are entered in one of the three points of fields on the 2nd page (and more), but the average function is not accurate because it adds 1 to the number of ' divide by "in the calculation of the average If the points are only entered into the fields on the 1st page.

  Here's the code I entered in the 'Custom calculation Script' box in the 'Calculate' tab of the Properties menu of Test field:

  Initialize variables

  var num = 0;

  var sum = 0;

  Browse the input fields

  for (var i = 1; i < 12; i ++) {}

  var f = getField ("points." + i);

  If {(f.valueAsString)

  increment the counter to non-empty field

  NUM ++;

  Add the value of the running total field

  sum += + f.value;

  }

  }

  Calculate the average

  If {(num)

  Event.Value = sum / num;

  } else {}

  All fields are empty, then the empty value

  Event.Value = "";

  }

  I do not see that. Add the code of script debugging will display the results that each field is completed:

  Initialize variables
  var num = 0;
  var sum = 0;

  Browse the input fields
  for (var i = 1; i)< 12;="" i++)="">
  var f = getField ("points." + i);
  If {(f.valueAsString)
  increment the counter to non-empty field
  NUM ++;
  Add the value of the running total field
  sum += + f.value;
  }
  }
  Debug - display results as the form is filled;
  Console.Show
  Console.println (sum + "/" + num + "=" + sum/num);
  end of debugging;
  Calculate the average
  If {(num)
  Event.Value = sum / num;
  } else {}
  All fields are empty, then the empty value
  Event.Value = "";
  }

• Thunderbird displays only the text in the messages received or sent, even if the options are set for the HTML pages.

  Using Thunderbird 25.6.0, running on W7 - 64-bit.
  Have used the T-bird constantly since it was morph'ed from Netscape Communicator, so feel I understand basis, including the specification HTML or text/HTML options.

  A user Windows, Thunderbird account works perfectly, for the second user of Windows, all Thunderbird email accounts (4-a profile of T-bird) suddenly transformed to send and receive all messages in text only.

  I regularly compose messages in HTML format, using the wide range of fonts, colors, embedded graphics. The compositions remain intact (HTML) until the moment where I send them. The copy in my "sent" folder is in the text; one of the graphics incorporated in my original will be attached, and all the others will be gone. If my recipient respond or forward the message to me, all of my original material is text, as well as all my recipient adds to his response.

  In addition, all original incoming messages of my correspondents are in simple text. Not a sign of HTML anywhere unless I have to compose a message, or a message saved in my drafts folder.

  What is the problem and how can I solve this problem?

  Dean Jones

  NO, I ask a question. I was NOT choosing my question as a solution to my question.

  Usually, when I start new topics, I am taken in part because it's something twice 6 months ago.

  I have no solution. I have a problem. I'll start a new topic

• you are looking for the same contact again and again

  Hello.

  Sorry if I missed something so trivial that could invalidate this question, but - well I missed it.

  My application constantly seeking the same Contact in the contacts list.

  Is there a better way to find a contact-> o (1) than to go thorugh the entire list-> o (n)?

  A kind of index? or a search option advanced that I supervised?

  I usually add a contact and after some time, I need to access once more.

  Sometimes it is in the same application runs, it is not

  Thank you

  The method described in the thread you cite is the recommended approach.

  With regard to the adequacy between the last phone number, you can search based on the last 4 digits and then perform a string match more in detail of the results in your application.

• Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?

  Try turning off the GPU. Go in Edition > Preferences > Performance (Lightroom > preferences > Performance on a Mac) and uncheck the box use Graphics Processor.

• My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  Hi chbradshaw,

  Instead of filling & signature, tool, use the text comment comment tool, KB doc option. using comments in the PDF, Adobe Acrobat DC files (keyword: Add a text comment).

  Kind regards

  Nicos

• Cannot install 2 black & white or command conquer games. Error:Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.

  The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition

  Hello
  
  Were you able to install these games without any problem before?
  Step 1: Install all updates of windows on your computer and check the number.
  Reference: http://support.microsoft.com/kb/306525 
  
  Step 2: Copy the game on your computer, then check the issue.

  Step 3: Perform the clean boot your computer.

  
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
  Note: To restore your computer to a Normal startup mode, follow these steps:
  
  1. click on start in the box start the search.
  2. type msconfig and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Entries are concatenated in the same column in the excel file

  Hi, I really need help in this emergency. The problem is when I open the spreadsheet file after you run the program below, all the values that I believe are concatenated in the same column. However, there are 2 different analog inputs which I want in 2 different columns. I'm getting the 2 waveforms in the same graph, but when I open the excel file, it seems that the entries are concatenated in the same column. Someone knows how to fix this? Thank you very much.

  

  Hi Ben 64,.

  Thanks a lot again. I did as you said and I removed the dynamic data and logged files added directly to the results. I'm still checking if the program works as I can branch only when I return to work tomorrow. Tell me if you think it might be able to work this time. Thanks a lot again!

• How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

  Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

  Hi heat110,
   
  -What is the brand and model of the router you are using?
   
  -You "Network Magic" software installed on your computer?
   
  Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
   
  Follow these steps to do the same thing:
   
  a. Click Start. Click run. Type Services.msc and press ENTER.
   
  (b) in the Services window, search for Pure Networks Platform service.
   
  c. right-click on the service and click on restart.
   
  d. restart the computer and check if you have got rid of the error message.
   
  Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.

• When I start the software Black Berry via the Office to receive the error message "the Black Berry Desktop software has encountered a problem and needs to close. We are sorry for the inconvenience. »

  Original Titus: cannot install software blackberry "BOLD"

  When I start the software Black Berry through the icon to the desktop, the windows error reporting or display below:

  Quote: Black Berry Desktop has encountered a problem and needs to close. We are sorry for the inconvenience.

  If you were in the middle of something, the information you were working on might be lost.

  Please tell this problem to Microsoft.

  We have created an error report that you can send improve us Black Berry Desktop Software. We will treat this report as confidential and anonyomous.

  End of quote

  What data means this error report contain?

  Why should I report to Microsoft?

  I received error below during the repair software blackberry

  Quote: The path:

  ' C:\DOCUME "1\HLZUTS" 2\LOCALS "1\TEMP\WZSE1. Berry TEMP\BLACK Office software.msi' is not found. Make sure you have access to this location and try again, or try to find the installation package "Black Berry Desktop Software.msi" as a folder that you can install the Black Berry Desktop Software 6.1 product

  End of quote

  No path

  Hi ZiaHL,

  Try the steps listed in the article mentioned below and check if it helps you to fix the problem:

  "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience. "during the synchronization process

  http://BTSC.webapps.BlackBerry.com/BTSC/dynamickc.do?externalId=KB10340&sliceId=&command=show&forward=nonthreadedKC&kcId=KB10340

  You can also view the article mentioned below for more information:

   

  BlackBerry Desktop Software issues fixed in this release

  http://docs.BlackBerry.com/en/Admin/deliverables/20936/BlackBerry_Desktop_Software_Fixed_904527_11.jsp

  Let us know if that helps.

• Both inputs of printer with different names for the same printer

  I try to add a new printer in Windows 7 64 bit laptop.  I chose to add a printer in printers and peripherals and selected add a network, wireless or Bluetooth printer.  I have two tickets for the same printer

  

  Why are there 2 inputs and one which should I use?

  These entries are actually at the same network address (192.168.1.10).  The second address Specifies a particular port (3910).  Software print server HP Jetadmin 'web-based' uses the 3910 port to receive the print requests.  See http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03975926

  The second is probably 'discovery of Web Services' (see http://en.wikipedia.org/wiki/WS-Discovery).  You probably don't want to use it from the "Add printer" Wizard

  I suggest to select the first entry.  This is the normal way to network printers appear in the add a Printer Wizard.  For example:

  

  If you have any problems with printing, post back and I'll see if I can diagnose the things for you.

• My images from various sources are fine in the library, but when I do develop they are converted into negative.

  My images from various sources are fine in the library, but when I do develop they are converted into negative.

  Go to Preferences, click the performance tab, and then clear the check box

• fonts of PDF in Acrobat Reader MS are coarse, while the same document loaded into Acrobat Pro on the same computer has smooth fonts. How to fix the appearance of fonts in MS Reader? Running Windows 7.

  fonts of PDF in Acrobat Reader MS are coarse, while the same document loaded into Acrobat Pro on the same computer has smooth fonts. How to fix the appearance of fonts to Rader DC? Running Windows 7.

  Hi sidneys22641895,

  Please try to check the rendering under Edit menu options > Preferences > Page Display.

  Check if in smooth text field "for computer/laptop LCD screens" is selected.

  Let us know if that helps.

  Kind regards

  Meenakshi

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• These two types of schema cache can co-exist for the same application?

  Can these two types of cache-regimes co-exist for the same application in coherence?
  1. close to support-maped by regime distributed cache
  2-reading-writing-support-card system

  From what you describe, that you're on track.

  I think that you have a number of servers that have a size limit near cache and stored disabled for distributed share. Then you have a number of servers that are responsible for the part of writeback (active storage) distributed.

  You can also take a look at the [best practices for consistency | http://coherence.oracle.com/display/COH35UG/Best+Practices]