Check Enable GPO

Hi, I have more than 100 domain controllers that exist in many places around the world. different users have rights to domain administrator who has managed policy and other things in different places. We must follow the user if any type of change that has happened in Group Policy existing, removal of group policy or of the creation of the new GPO. My question is, how we can follow to which the user did change without AGPM server and we do not want to install the third-party tools. Y at - it tool that is provided by the DM? Please guide me step by step how to enable the creation or modification of the GPO auditing policy.

Hello

Please post your request in the forum for better support.

TechNet

Thank you.

Tags: Windows

Similar Questions

  • Authentication computer certificate and windows domain check

    Hello

    We intend to deploy machine? s certificates of authentication for wifi users.

    We want to check the validity of the certificate of the machine and that the machine is included on the windows domain.

    We intend to use EAP - TLS:

    -A CA server.

    -each machine (laptop) retrieves its own certificate to GPO or SMS

    -the public certificate of the CA is pushed on GBA as well as on each machine (laptop)

    -ACS version is the one device

    -a remote ACS agent installed on the A.D.

    -When a user intends to log on to the wireless network:

    -(device ACS) server sends its certificate to the client. This client checks the certificate with the certificate of the CA server there already trust, results: the customer also hope the ACS? s certificate signed by the CA server.

    -the client sends its certificate on the server (ACS unit). This ACS checks the certificate with the certificate of the CA server there already trust, results: GBA also hope the customer? s certificate signed by the CA server but the ACS also checks to see that the certificate isn't? t revocated (GBA check it thanks to the CA CRL server? certificates revocation list).

    I'm right about these previous points?

    And then my question is: is it possible to check that the machine is also included in the windows domain?

    In other words, is it possible for the candidate countries get the necessary field (maybe CN? certificate type "host /...") "), and then do an authentication request to the AD (active directory) with the remote agent of GBA? We just want machine authentication, the authentication of the user not.

    Thanks in advance for your attention.

    Best regards

    Arnaud

    Hi Arnaud,.

    You are right.

    Once the Remote Agent is configured correctly. And clients are configured correctly.

    It will work the way you want.

    Another option to consider,

    Also check 'enable machine access restrictions '.

    http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/acs41/user/usrdb.htm#wp354338

    Kind regards

    Prem

  • I'm trying to find the Tools menu, so I choose "Options", "Content", "enable Javascript". Where is it?

    I'm playing a Facebook/Zynga Game and it crashes on me. Here are the instructions that I follow:
    Firefox users, please do the following:

       Select Options from the Tools menu
       Click Content
       Check Enable Javascript
       Click OK
       Refresh/reload your browser window.
    

    And I can't find anything that gives me something like that.

    In Firefox 4 and higher, you can:

    • Press ALT or F10 to temporarily show the Menu bar and make the selections that you mentioned above which shows temporarily bar menu OR
    • Click the Firefox button > Options > Options GOLD
    • Hold DOWN the ALT key and press the letters OF

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  • How to fix VMware View Server certificate revocation check connection error?

    Dear community,

    For about 2 weeks, I feel a revocation of the certificate check error in our environment Horizon see 6.2. The strange thing is that, within 12 hours about two (replication) connection servers and the vCenter Server / server of composer (on the same machine) are considered as having invalid certificates, even if, in fact, they are valid (CA certificates). We use no security servers.

    The view admin console shows the following for servers connection:

    The server certificate is not approved.

    The server certificate cannot be verified.

    For the vCenter, he said (that I have validated manually the certificate):

    No problems found.

    Certificate is not approved, but the thumbprint of the certificate is accepted.

    With the connection series on 'full', States that the login server logs for the vCenter server:

    TRACE (B 17-0 - 0E98) < VCHealthUpdate > [NativeKeyVault] validateCertificateChain response: {result = FAIL, EndEntityReasons = cantCheckRevoked, ChainReasons = invalid, SelfSigned = false, EndErrorCode = 16777280, EndInfoCode = 258, ChainErrorCode = 16777280, ChainInfoCode = 256, PolicyErrorCode =-2146885613}

    As far as I can see there no similar entries for login server certificates in the newspaper.

    At the moment I am under the environment with composer and vCenter certificates manually valid and invalid connection (red) server certificates (as view clients and browsers are not disabled).

    I already checked that I am able to do everything 'green' again via setting the registry key 'CertificateRevocationCheckType'2 (as described here Configure the server certificates certificate revocation check). This brings me to the conclusion that one of the intermediate certificates cannot be validated. So, I had the information a "version" of an intermediate (intermediate certification authority) certificate has been revoked. There seems to be no coincidence - like the time point is as well, but this particular version does not appear to be used in the servers of my connection.

    However, even with full logging enabled, I can't information which (intermediate) certificate cannot be validated and why. I expected to see something like 'OCSP verification' or 'check the CRL' but I can't find it in the newspapers. However, I noticed that one of the intermediate certificates lacked the OCSP URL (even if the field "Authority Information Access" existed). Of course I updated the certificate with a version that contains the OCSP URL, but it has not changed anything.

    In addition, I checked manually all of the certificates in the chain with openssl (for OCSP) and CRLs as well, but everything seems to be OK (all URLS are accessible and no opportunity of certificate has been revoked). Actually, I do not interpret the error as "that the connection to the server is an invalid certificate because it has been revoked", but "it cannot check if it has been revoked. The servers do not need a proxy and nothing configured, so (I checked the proxy settings system context, also).

    For now, the problem is not critical, such as 'red' status connection server has no effect on our customers and so I could turn off certificate revocation check (or switch to check that the certificate of the server (2)). But of course, I would really solve the problem.

    Is there someone who can give me a hint on what to check, for example, how do I know which certificate cannot be controlled and why? Someone had the same or a similar problem? Support VMware is working on the problem as well, but they seem don't know is not the problem, either.

    I appreciate the thoughts and responses! Thank you!

    Best regards

    Fabian

    Dear community,

    During this time, I was able to correct the error described at the beginning of this thread. Jump to the end to see what could probably help you...

    1. At first, I installed an additional standalone VMware View Server connection in order to check the following related certificates:

      1. VMware support always told me to renew my certificates because they "were not valid" etc. - even if in fact they were (like external URL calls and attested manual verification and tests).
      2. That's why I created new additional certificates for the login server and configured to include the vCenter even as my production environment - only difference was I didn't inlcude the composer who runs the server vCenter himself.
      3. The result was that the server was "green" including both the vCenter Server certificate which could be 'not reliable' by the environment of production - strange, huh?
    2. After I reset the additional server to a turned wink where connection to the server was not yet installed (before that, I uninstalled the connection to the server in case there is information in vCenter thereon) and reinstalled as a replica of the production environment server. Somehow I expected this, but still quite strange the vCenter Server (and composer) now again was considered "invalid", even if the certificate of the server connection itself considered still valid and green. For test purposes, so I put certifice revocation checking on '2' (only one server certificate check) - but only on the 'old' production servers' and 'magical' everything has been considered valid. So as I see it, there seems to be some sort of information stored on the 'old' connection servers that makes them believe that invalid certificates and that the information is replicated on the third server unless I lower the revocation of the certificate controls on these servers. Altervative explanation could be that VMware View does not accept certificates with aliases that do not include the 'real' server name - that is / was in fact certificates the old servers connection. The new server certificate connection included the real name and the alias. I understand if this is the case, but then I expect that it be documented somewhere (I have not found this information) and also wouldn't understand why it worked without problem for several years before.
    3. After finding that out, I created new certificates for the 'old' connection servers, including aliases and real names and replaced the certificate on one of the servers (and restarted the login server) - only a few successfully. Once I put the revocation checking on '4' again on this server, the login server certificate was still considered valid, but not the vCenter and certificate of composer.
    4. Now, I've uninstalled the old login server (removed from the view) and reinstalled completely (including an update of the 2008 R2 2012 R2 OS) and after I have it reintegrated into the environment, everything remained green - as long I have will activate revocation checking on the second login server "old." This is why I did the same with this (completely reinstalled and reinstated it) and now everything is green with the revocation checking enabled on all replicas of server connection.
    5. The next step I uninstall the additional replica because I created only for troubleshooting purposes.

    So what will no doubt help in similar cases:

    • Reinstall the servers of connection one by one, including:

    • Uninstalling html access (if used), uninstall the login server to view, uninstall 'VMware' AD LDS Instance.
    • Removal of the connection to the server of replication group: run "s - r s uninstalled_ vdmadmin.exeservername" on one of the servers connection remaining.
    • Reinstall/Update OS (may not be necessary, but I did not test that)
    • Reininstall, return to the login server replica. If you used the certificates which included only the alias of the server I recommend you to create new ones, including the name of the server as well, but maybe it's not necessary as well. If you want to keep the certificates which only inlcude the alias it will be necessary to install this certificate after the first replication of the servers (see below).

    My question for technicians of VMware/developers: It is supported to use certificates include only the server alias. Otherwise why it worked before and where is it documented? Where are certificate cached information so that simply replace the certificate was only some, and not a complete success (see above). FYI - when I paired initially replicas that I had to install the CA (including only the pseudonym) after the first replication - now with certificates (including the server name and the alias), I could install the certificate before you replicate (= the login server installation).

  • Enable the display cloning

    I try to turn on the display cloning/Mirroring on our clients clear Cube Zero. We have Dual and Quad Port Tera2 in our environment. FW Verizon 4.8, Horizon View cloned 5.5 computers desktop running in a floating pool.

    I use a Tera 2 Quad processor review TERA2140, rev: 1.0. I have "Allow cloning to screen" with the Enabled value in the profile that is applied with success to zero my client. No joy and I don't see an option in the menu view of topology for clone or mirror displays.

    The description claims display cloning 'these Tera2LC propertyonly effects' which I do not know how to tell if it is the kind of material I have.

    Is there another step I'm missing, possibly at the level of the Admin View? How will I know if my zero clients are Tera2 'LC '?

    The Teradici Forum

    OSD--> Options-->--> topology display, user settings.  Check enable cloning of screen.

    https://communities.Teradici.com/questions/2108/enable-display-cloning.html

  • That is - this pre - req checker... How reliable is it?

    Hello

    I'm trying to build on the server for vCAC 5.2 and execution before requisition checker all the Red Cross have been fixed only with IIS, I'm frustrated. No matter how many times I turn off of <>- the authentication method to change checker.

    However if disable any authentication method, the status of IISServer goes red with messages that none of the authentication method is enabled. If I enable Windows authentication (which is really required or active), IIS server Red Cross changes checkmark green but get nothing change to the other of the Red Cross.

    Recross.JPG

    Be frustrated I checked the Configration file that this auditor seems to actually change the status. Surporsingly I found all the required parameters are saved in the Configuration file.

    annonymous.JPG

    windows.JPG

    I do not understand if they are well recorded then why does not check showing green status?

    Is this auditor really trust for such control action? >

    I'm just now frustrated and tried to do the same step for the last hours.

    Need help Frédéric

    Thanks in advance

    BR,

    MG

    According to me, the pre - req check tool seeks the settings in the registry, and if you set windows authentication, leave the default values for the advanced settings and information about the provider, although correct, is not updated everything that seeks the auditor.

    To fix:

    1. Go to the IIS default website services manager
    2. Authentication
    3. Authentication Windows, advanced settings
      1. Set extended protection to something besides off, uncheck the box enable kernel-mode, press OK
      2. Return to the advanced settings, back of extended protection set to off, and check enable kernel mode, press OK
    4. Authentication Windows, providers
      1. Remove Negotiate, NTLM, click OK
      2. Return to suppliers, add Negotiate and NTLM, click OK
    5. Re-run the auditor of the pre - req, should show Green
  • How to enable hardware acceleration in an Adobe AIR application

    Hello

    As the author of this post How to enable hardware acceleration in an air exe? , I try to activate hardware acceleration inside my AIR application

    If the user has disabled hardware acceleration in the sound settings flash drive, context3d.driverInfo will say "Hw_disabled = userDisabled".

    The only way to re-enable is to open Internet Explorer or Firefox and right-click on a flash content, then check "enable hardware acceleration".

    I (we) would like to be able to reactivate directly inside the AIR application (via actionscript code) and not tell the user to open a browser and check some random boxes (cause you know that it is not very easy to use...)

    A bug has been opened here Bug #3843535 - disable hardware in IE plugin flash acceleration turns off in AIR EXEs and is marked as fixed but nothing is fixed: there is still no way to enable hardware acceleration in a desktop AIR application

    Thank you

    Hello

    I pushed to get this fixed a bug and felt that we have addressed this issue in v16.  Can you share an example of application so that I can have our team take a look?

    Thank you

    Chris

  • Issue of auto brightness

    If on my Macbook Pro, the auto brightness turned on, what happens if I change it manually with the cursor (while the auto brightness is always checked/enabled)?  -What changes the Auto brightness calibration in the future?  Alternatively, he revert to the some internal calculation over time?

    No effect, you're good.

  • Network: 2 routers Apple broadcasting separate wireless networks; one (Xfinity/Comcast) cable modem

    Hello community!  Need help, I want to use two routers to establish two separate wireless networks on a cable modem connection.  I searched for my answer and see some other threads on this topic, but all are either a bit too technical for me, are incomplete on the answers to my questions - and all seem to be locked.  I have also searched YouTube and only see videos to extend a network with two routers - not my goal.  So here is a long, but a detailed post on what I need someone help with - thank you very much in advance if anyone can all small-not me-I hope it will be useful to others in the future.

    The program installation/hardware: I have internet Comcast/Xfinity that runs to a Motorola surfboard cable modem (SB6141).  I also have two routers apple - a Time Capsule from Apple AirPort (to end 2013) and a new (2016) AirPort Extreme.

    Purpose: This is what I need--I need two separate wireless networks.  Before going further, by using the guest account and 5 GHz of a single router isn't an option for me.  I need to have both wireless networks separate (one of each router), do not talk to each other, or allow access between the two - the only is that they share the Comcast internet gateway.

    My plan is to have the cable modem Surfboard connect to airport Time Capsule, which will then connect to AirPort Extreme (even if it could be reverse - no difference, except that the data that I show below comes from the time Capsule, which is currently connected to the modem cable).

    To read the previous discussions, it seems that the starting point would be: modem router #1 Ethernet WAN, then a router cable #1 LAN Ethernet to the Router #2.

    First issue of clarification - the connecting cable should go to the Ethernet WAN port on the Router #2 or a LAN Ethernet port?

    Now that the first easy question is the road, I need help to configure two routers connected to allow two separate networks.  A lot of discussions about the positions of static IP addresses, cascade, etc..  I need specific help with AirPort Utility on what to change on what router.  It seems obvious that the settings under the 'Internet' and 'Network' tabs are those who need to set - the 'wireless' tabs simply treats the name of the wireless network and settings - these, at least I can understand!

    I'll organise this tabbed - here go us.

    First of all, the "Internet" tab/window Airport utility. Here are the options:

    Connect using: Router #1 has currently DHCP (which I think is OK?) What should it be set to Router #2?

    This tab lists also the current address in IPv4, the (255.255.254.0) subnet mask and the router address.

    It has grayed out information in the boxes for the DNS servers; Name of domain and DNS IPv6 servers.  At the bottom of the window, there is an IPv6 Internet WAN address listed.

    If I click on the "Internet Options" button at the bottom of the window, it takes me to the 'Internet Options' window. Here, there are various IPv6 information - it seems that I can choose the configuration of IPv6 and the IPv6 mode using the drop down boxes/selections were also chosen.  There is also a checkbox 'Enable IPv6 connection sharing'. Are the current settings for these for Router #1: configure IPv6: automatically; IPv6 mode: Native; and check/yes to enable sharing of IPv6.

    Next up, the 'Network' tab utility AirPort/window.

    Here, there is a drop-down menu "Router Mode", a DHCP range listed, and the ability to add or remove reservations DHCP and Port settings.  The DHCP range listed for Router #1 is 10.0.1.2 to 10.0.1.200.  There is currently no reserves DHCP or specified Port settings.  Finally, there is a checkbox to the bottom to "Activate the access control" - it is not currently checked/enabled.

    If I click on the 'Network Options' button at the bottom of the window, it takes me to the "Networking Options" window Here I have areas of entry to specify the DHCP lease duration, can specify the DHCP IPv4 range, as well as part of the extended DHCP IPv4 comments.  There are checkboxes: enable NAT Port Mapping Protocol. Select the host by default (with input if selected text box); Enable the IGMP Snooping; Block incoming IPv6 connections; Allow the Teredo Tunnels; and allow inbound IPSec authentication.

    For this window, here is the current settings on the Router #1:

    DHCP lease is 1 day; Beach DHCP IPv6 is 10.1.2 to 200; Hosts IPv4 DHCP Range is 172.16.42.2 to 200.  The following check boxes are enabled/checked: enable NAT Port Mapping Protocol. Block incoming IPv6 connections; And allow inbound IPSec authentication.

    Who can help me? What parameters, if all do I need to change the #1 router?  How to set up router #2 to make a second wireless network?

    Purpose: This is what I need--I need two separate wireless networks.  Before going further, by using the guest account and 5 GHz of a single router isn't an option for me.  I need to have both wireless networks separate (one of each router), do not talk to each other, or allow access between the two - the only is that they share the Comcast internet gateway.

    What you really need is a combination router / Ethernet switches that s supports VLANdedicated. Given that Apple routers do not, at best, you can potentially get the results that you are looking for, but at a performance cost. In other words, you can have two separate WiFi networks where clients connected to a network can not 'see' those related to another and both routers will always provide access to the Internet through Comcast modem. Note: Arris / Motorola SB6141 isn't a gateway device. Instead, it's a simple modem. A gateway is a router modem combination.

    To do this, should do the following:

    • The Time Capsule (TC) would need to be directly connected to the modem using an Ethernet cable. This base station would remain in its default configuration of the router. In other words, the router Mode (in AirPort Utility) would establish: DHCP and NAT.
    • AirPort Extreme would be directly linked to TB by Ethernet. The cable must be connected to one of the LAN ports on the TC on the WAN port to the extreme. It must also be configured as a router. However, there are differences in the extreme:
      • Use a different name to the Wi - Fi network.
      • Use another range of IP DHCP address. By default, Apple base stations use IP addresses in the 10.0.x.x range. I suggest that you set the base station of the second on 192.168.x.x range.

    There is a major drawback with this configuration. The second base station will be in a State of "Double NAT". Although this "separating" the two networks on different subnets, this condition is not very effective and connected to this network of customers will get lower throughput performance. There is no way around it and it is not recommended.

    First of all, the "Internet" tab/window Airport utility. Here are the options:

    Connect using: Router #1 has currently DHCP (which I think is OK?) What should it be set to Router #2?

    The two should be: DHCP.

    This tab lists also the current address in IPv4, the (255.255.254.0) subnet mask and the router address.

    These leave it as what. The TC is information of IP address of the modem. The extreme, he'll get the TC.

    It has grayed out information in the boxes for the DNS servers; Name of domain and DNS IPv6 servers.  At the bottom of the window, there is an IPv6 Internet WAN address listed.

    These leave it as what.

    If I click on the "Internet Options" button at the bottom of the window, it takes me to the 'Internet Options' window. Here, there are various IPv6 information - it seems that I can choose the configuration of IPv6 and the IPv6 mode using the drop down boxes/selections were also chosen.  There is also a checkbox 'Enable IPv6 connection sharing'. Are the current settings for these for Router #1: configure IPv6: automatically; IPv6 mode: Native; and check/yes to enable sharing of IPv6.

    Unless your ISP provides your IPv6 service, change the IPv6 configuration option to: 'Link-local only' on two base stations.

    Here, there is a drop-down menu "Router Mode", a DHCP range listed, and the ability to add or remove reservations DHCP and Port settings.  The DHCP range listed for Router #1 is 10.0.1.2 to 10.0.1.200.  There is currently no reserves DHCP or specified Port settings.  Finally, there is a checkbox to the bottom to "Activate the access control" - it is not currently checked/enabled.

    Router mode should be: DHCP and NAT to two base stations. Ignore the DHCP reservations and Port settings for now. Let the current DHCP range for the TC. Change the DHCP range for extreme for: 192.168.1.2 a.200. At this point do not access control for each base station.

    Since you seem to need the step by step instructions or need help to understand the different terms networking, I highly recommend that you help you to become familiar with networking, specifically on Apple systems. I suggest you consider taking the e-Book to the next control: take control of your Wi - Fi Applehttps://www.takecontrolbooks.com/apple-wifi network

  • How can I store the passwords that have been deleted

    I had the usernames and passwords stored for multiple accounts of e-mail on the same site. These have been accidentally deleted from the list of saved passwords, and now I can't get Firefox (23.0) to remember once again. I have no password check enabled (behind a master password), and this site does not appear on the list of "exceptions." In the password management utility, there is no facility to add new passwords, not to remove them. It seems, once removed, Firefox assumes one will never want to save this site again.

    I'm in and out of these accounts literally dozens of times a day and now connect in the manual every time. How can I get Firefox saves these combinations of name of user and password for me again?

    Yes. AutoComplete = off is a direction that web sites can give a browser to instruct them not to store the data that you enter in an input field. This can be search terms that you enter on a Web site like Google, but also the privacy and security of sensitive data such as a credit card number.

    If you use the bookmarklet so you know what you are doing and give it a second thought.

    If you use the extension that you don't notice that a Web site prefers that you do not to save this data.

    With recording a password, you will need to confirm a prompt, but the other form data can be recalled if imperceptible autocomplete = off is removed.

  • Why when I open my camera Foscam, Activex mode, I have no picture, and I click on manage at the bottom, but ger javascript:adminstrator0. Why

    My FI8910W Foscam, opens after the Panel, with three modes to the choice. Only ActiveX in IE mode, working to allow records to do. Sometimes, back, right after that I bought this new laptop, a free AT & T program with McAfee, is available for AT & T users. But this soft, can be loaded in Internet Explorer, and something wrong with IE, it prevented from happening. I contacted AT & T Tech support, allowed the tech on my machine, and even he couldn't solve it. Then, he opens Firefox I already had and installed a program that makes Firefox actually act like IE, so that the McAfee software, can be downloaded and installed. He worked, using Firefox to replace IE, to download and install, but the spooler to print on my pc, went wrong, and would not work to use my printer. Tech Dell takes control of the pc, found to reinstall a full Windows 7 was necessary, and he did. Now, the works of print spooler, but the new facility, has removed the AT & T Tech software added to Firefox.

    That is a pain, but we need, for some sites, as for the Activex mode, with my camera. I tried pening mode ActiveX in Firefox, and it opens, but not picture. When I click on device management, to go into the settings, I can't. What I get is a little pop ball down to the right, that says "javascript:administrator0". Thinking that perhaps the Javascript has been disabled, I checked in the options and it's not so it is checked, enabled. I'm on my pc as an administrator, so now I'm stuck. Y at - there someone who can explain how to make it work, so I can use my camera in ActiveX mode, so I can actually record tings, if necessary, when I leave? Thanks in advance. Oh, my Win 7, a 64-bit OS, not the 32 if it helps.

    More than likely you have had IE Tab installed in Firefox before re-installing Win7.

    https://addons.Mozilla.org/en-us/Firefox/addon/IE-tab-plus/

  • Spotlight is unable to find files -!

    I've always had problems with the projector, and I still think that the next major version of Mac OS X will solve these problems. He never does.

    I checked the system preferences > Spotlight, and under the search results, I made sure the Documents, folders and Applications are checked (enabled).

    In a folder full of files, in the search at the top of the window box, I tried to type the name of a file that I know is there: GarageSale. I made sure that the current folder is selected in the search at the top of the window box.

    When I type 'G' it finds several files, when I type 'Ga', it finds a file and when I type "Gar", he finds nothing. In this case if I choose Filename or in the popup of little beside the search field.

    I emptied this search, then SELECT AND COPY THE FILE name of one of the files that I have seen in this window and then PASTED into the search box (to make sure it was typed correctly). Star still found nothing!

    It is a fairly simple operation, and I don't know how I could do something wrong, but if I am, please let me know.

    If you have not yet tried, Spotlight re-indexing.

    Instructions here > rebuild the Spotlight to your Mac index'

    Then, try a search.

  • Do we need to disable Javascript in Firefox / Options / content box? Or just in the Java Control Panel?

    Need clarification on issues of Java. It is clear that we can disable Java in the configuration java itself or via the plug-in Panel.

    However, what about the firefox options menu? When you click on Tools_Options_Content and then you can check or uncheck 'Enable JavaScript' - which is sure to be checked/enabled or also belongs to the security concern w / Java now?

    Hello aladria, javascript is a different technology from java. Firefox 18 will not automatically execute the vulnerable version of the java plugin - on websites where it is used, you will need to enable it manually. in case you want to totally disable the java plugin because of the latest reports of the vulnerability 0-day-you can do it in firefox > addons > plugins.

  • Why different applications react differently to the same pressure tapping?

    MacBook Air (13 inch, mid 2013) Yosemite 10.10.5 e-mail version 8.2 (2104) and I am aware of the updates for these circumstances.

    I have noticed that when you use the e-mail the trackpad is too reactive to the look, so that the same amount of pressure on this site or

    another site on Safari (but not others, because it is more responsive on wikipedia as mac mail) might need more pressure or even strong look even receive a response at all.


    Is this something I do or a feature of these sites and applications?

    Previously I was clicking on listen and not from using tapping, this has started to (what I call over-sensitivity by the cursor using the trackpad on a MacBook Air):

    -Understand that Mac adapts to the user; I'm the only one using my computer, but would it not be part of his adjustment make listening to click before?

    -The idea that this "breaks" could be the battery swelling against the trackpad, but checked on the Mac 'of the battery"and he says that it is 'Normal '.

    -Have you noticed that if I'm particularly aware of my fingers and where they are EXACTLY, as well as the rest of my hand, that helps a lot, but nevertheless it can still happen even in this case

    -I don't think it's just me, as a friend using a different notebook (MacAir early-2015) has recently made the switch from clicking to eavesdropping and reported having the same problem.

    -J' read Sys Pref > Trackpad options but for as far as I understand, none seem to address the issue of the pressure and the responsiveness of the trackpad to eavesdropping. (Just put the cursor on an email and it opens or moves to a mailbox with what seems like no pressure tap at all or opens the message, it set up a response.) On wikipedia, for example it seems I am just passing on an item with the cursor and it opens the link.)

    Are there adjustments options to reactivity more personalized listening or helping me become more aware and

    of what I could do to cause this reactivity?  I can do the trackpad tap less responsive Mail where it's more annoying as one

    feels that they can lose a message here.

    Since this question is search discussion groups under "trackpad issues" and see that these are concerns that date back a few years with the MacBook Air, as far as I can see.

    In these discussions of 'clicks ghosts', a speaker asked if the person asking the question, had 'activate him slide' checked and if yes, they suggested unchecking it.  Sys Pref > accessibility > mouse and Trackpad > Trackpad options - where I tried NOT checking "enable drag". In the same place at Sys Pref, I unchecked "spring-loading delay. Both of these measures seem to be helping. 

    These two choices and a growing awareness (of exactly how light a touch is necessary - even a little nervous tap that I might not even know was going on before because I was using the clicking on rather than look) , it seems, has slowed the reactivity and the trackpad on the MacBook Air mid-2013 oversensitiveness.  For those most familiar perhaps you could comment on is it's possible use of a reagent trackpad, it would be greatly appreciated.  Thank you for your time and your consideration.  Because these choices seem simple and non-intrusive (at least for me) they can be worth a try for other people who also say that they have these issues with the trackpad being over-sensitive to the look.

  • Re: Qosmio G20: DVD-RAM UJ-845 s does not read CDs or DVDs

    I'm a big supporter of Toshiba product.

    Please help me

    Given that I had to do to update form my * Toshiba Qosmio G20-123 *.
    My * DVD UJ-845 s * do not read any CD or DVD.
    Before that, he worked a lot of good. But unfortunately now, he does ' t read anything.

    The system to recognize it. The driver is installed and working properly.

    After I installed supports DVDRAM of Toshiba.
    The same thing occurs when playing a CD, the system tells me:

    * E: / not accessible *.
    * incorrectness function *.

    I try with a program on the net but no way.

    I was well able to put the original firmware, but I could not find.
    If someone can do a dump of the original Firmware for me it will be a miracle for me.

    Help, please.
    My great respect.

    I think I can help you:

    Go to my computer right click on the CD/DVD drive.
    Now go to properties; Click the Recording tab and check "Enable CD writing on this drive".
    Now click on apply and restart the laptop.

    Check of workaround and post comments

Maybe you are looking for