Check if a number is in the range
Hello
How can I check if a number is within a range and then return the value associated with a GPA Calculator:
Thus, for example, if the mark is 78, I want to return the Grade B +. I couldn't understand that using the HLOOKUP function.
Thanks in advance.
create a table as shown on the left of the screenshot (included below so that you can copy / paste):
the table must be named "GPA", illustrated and formulas can work:
In the table on the right you can find the letter and VMI like that.
Enter the digital category in column D
Select cell E2, and type (or copy and paste it here) the formula:
= VLOOKUP(D2,GPA::A:C, 3,close-match)
short hand for this is
E2 = VLOOKUP (D2, GPA::A:C, 3, end-game)
F2 = VLOOKUP (D2, GPA::A:C, 2, end-game)
Select cells E2 and F2, copy
Select cells E2 at the end of column F, dough
Here is the information of table to search for your convenience:
Digital |
GPA |
Grade |
0 |
0 |
F |
50 |
0.7 |
D- |
53 |
1.0 |
D |
57 |
1.3 |
D +. |
60 |
1.7 |
C- |
63 |
2.0 |
C |
67 |
2.3 |
C +. |
70 |
2.7 |
B- |
73 |
3.0 |
B |
77 |
3.3 |
B +. |
80 |
3.7 |
A- |
85 |
4.0 |
A |
90 |
4.0 |
A +. |
Tags: iWork
Similar Questions
-
The range presets &; comparison of low numbers
I am creating a control function that changes the scale whenever the button goes from high to low index or index from the bottom up. It works well, except when the number is in the range of 0.001 a.01 then it sticks. It would seem that the comparison out true when contributions are 90.000E - 3. copy of the contol funtion in a stand alone vi is attached
It is a problem with the double precision values - change equals in the increment to greater than or equal to and equality in less or equal to decrement. Cheers, Matt
-
Find the number in a specific range
Hello
I have a requirement where I need to check the lower and upper
'Beach' for specific number. The range has increased by 0.05
Example:
Range:
0.05
0.1
0.15
0.2
0.25
0.3
0.35
So if I am provided number tell 0.29, I must return under
outout
Number Low_range High_range
0.29 0.3 0.2
0.13 0.15 0.1
How can I do this via oracle sql? I tried both options but
nothing seems to work.
Any help would be appreciated
Published by: 1002048 on April 23, 2013 15:00Hello
Welcome to the forum!
Oracle has two very practice of built-in functions, FLOOR and CEIL, that return the nearest integer, no more than not, or not less than a given number. Is there a way that we can take advantage of these features? Yes! They deal with a range of 1.00, and you have the beaches de.05 or 1/20 that size. Thus magnify your numbers by a factor 20, use CEIL and FLOOR and then narrow results by a factor of 20, like this:
SELECT n , FLOOR (n * 20) / 20 AS low_range , CEIL (n * 20) / 20 AS high_range FROM table_x ;
To test this, I created a test table:
CREATE TABLE table_x ( n NUMBER ); INSERT INTO table_x (n) VALUES (.29); INSERT INTO table_x (n) VALUES (.13); COMMIT;
You should post examples of data like this whenever you have a question.
I got these results from these data:
` N LOW_RANGE HIGH_RANGE ---------- ---------- ---------- .29 .25 .3 .13 .1 .15
Moreover, it is better to ask questions like that are on the language SQL, PL/SQL, and SQL
See the FAQ for this forum {message identifier: = 9360002} -
I have a lot of trouble recently with the release of the color range in Photoshop CC. The software is updated. I used to the Datacolor years to calibrate the system, and it worked well always. But now I noticed that I have a lot more images with out-of-gamut colors, and it prints wrong. Is this a problem with Adobe? The rest of my equipment is the same. Any help? I'd appreciate comments. Thank you, Emilio.
First, the range warning applies to the proof profile that you put in place, under test format. If this is not the profile that you want to print with, there is no relevance.
Second, range warning is a very large and imprecise indication, and I would just turn off. It shows what is out of range, but not how much. There are better ways, like proofing (even once, test format, toggle with ctrl + Y).
You can also convert a copy of the file to print your profile and look at the histogram. If you have severe cuts, you can adjust the file accordingly.
Third, there are people who feel the effect of threshold is best handled by the profile. In other words, doing nothing, just convert and done. I'm not one of them, just thought I would mention it.
------------------
Just to put us all on the same page, here are the basics:
There are three different color profiles here. The document profile, the profile of the monitor and the printer/paper/ink profile. If all of these profiles are good, the results will be consistent and predictable.
So to start with the document profile. These are important parameters in the PS color settings dialog box:
It can't be Adobe RGB, but there must be a standard color space (sRGB, Adobe RGB or ProPhoto).
Then the monitor profile. The Spyder software everything for you, and Photoshop uses this profile to display the file. You don't need to do anything once the software ran - it is all set up automatically.
You can check in Windows color management has the right profile is configured by default:
Thirdly, the profile of the printer. It's one that refers to the book as "Xxx of Epson Premium glossy", or all that apply. You choose this profile in the dialog box print in Photoshop, and then you go in the printer driver ("settings") and ensure that color management is turned off it. You don't want a double color management.
If it withdraws, and it still does not seem good, get back with more details.
Oh, by the way - have you got your NEC monitor with Spectraview calibration software included? If you did, it is greatly preferable to the Spyder software for reasons more than I have space to list here. You can still use the Spyder probe, at least if it's generation 3, 4 or 5. Earlier versions are notoriously few reliable and also not designed for wide gamut displays.
-
AF:inputRangeSlider launches the number is outside the valid range.
Hi all
I'm trying to implement af:inputRangeSlider for dates.
I'm following https://blogs.oracle.com/groundside/entry/using_inputnumberslider_for_dates to achieve
everything works fine except when I drag the range for the date, he throws me start number is outside the valid range, as in the thread
but it is difficult to encode the value of long type there... in my case must change dynamically
Please help me on this
Jdev version: 11.1.1.6.0
Thank you and best regards,
Shakir
Hi Daniel,.
Thanks for the reply,
discovered the difficulty, rather than use the calendar to get the date in milliseconds
used java.util.Date api
but don't know why using calendar for the date in milliseconds the origin of the problem
Instead
Calendar prevYear = Calendar.GetInstance ();
prevYear.set (Integer.parseInt("2010"), Calendar.JANUARY, 01);
System.out.println ("date in milli seconds:" + prevYear.getTimeInMillis ());
I used
Date = new Date();
try {}
SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy");
= sdf.parse("31/12/2013");
}
catch (Exception e) {}
e.printStackTrace ();
}
System.out.println ("date in milli seconds:" + de.getTime ());
Thank you
Shakir
-
Hello
I have a ZIP column which is the Varchar2 data type, it has values such as 2345, 09485, 10900, 07110, 06534.
I have to go look up records from the range of values for the ZIP column as between 00000 and 07500.
Could you give a logic.
Thank you.
Hello
I think you can use the following code:
SELECT T.*
OF
t WHERE the to_number (ZIP) between TO_NUMBER('0000') and TO_NUMBER('07500')
;
CGomes
-
Filter for table data, the range of data obtained and defined 2D
I produce data of an ultrasonic sensor at 1 K Hz, and there is a lot of data (data points range of 0 to 10). However, in some cases when I know that the data should be about 7 (for example) I get outliers (about 9 and 10). Is it possible to define a filter for data in the defined range.
I averaged the data to get an average value, and outliers are distorting. In the worst case, my outliers are 30 to 40% of the data generated. I created a filter to sort the data and, taken from the lowest value. I stop the loop when data reaches a value greater then 9. But this seems to take a long time (because the loop checks for each data point and there are 1000s of them).
Is there a better way to filter data and define a predefined table range to collect?
I enclose my filter.vi... and a set of samples of my previous data. The ranges of data of 10-8 and would like to have the range 7.5 to 8.5 to consider. The sensor records tension here and the problem can be solved by installing a different type of sensor, but if a filter in LabView can due it, the sensor that we use now is absolute.
I am in kind of emergency, my design in unfinished because of this problem, if someone can find some time to share some suggestions, I will be grateful.
Thanks in advance.
See attachment. I have incorporated the data you've posted in the vi. It doesn't seem like any data were less than 8.7 or so, so I modified the scope so it would be a few points on average. Some games were completely out of reach while the average came back like NaN (not a number) due to a division by zero.
-
Check, through periods of time between the rows
Hello
I have the problem by creating a select to check between crossing periods of time.
It comes to my table
CREATE TABLE 'T_PLAN '.
(NUMBER OF 'TRAIN_NO',
VARCHAR2 (5) "TIME_FROM."
VARCHAR2 (5) "TIME_UNTIL."
NUMBER OF 'RAIL_NO '.
) ;
TRAIN_NO TIME_FROM TIME_UNTIL RAIL_NO
172 07:06 15:50 1
120 07:33 15:41 2
229 07:56 14:52 3
217 15:05 18:47 1
189 16:10 19:53 2
185 16:10 19:53 3
181 20:10 23:53 2
29: 14 142 23:32 3
I want to check if my train number 172 crosses another line with the same RAIL_NO.
In this case train number 217 hits the same time period as the fact of 172. Car: 15:05 < = 15:50
The output that I need:
TRAIN_NO TIME_FROM TIME_UNTIL RAIL_NO CHECK_ROW
172 07:06 15:50 1 INVALID
120 07:33 15:41 2 VALID
229 07:56 14:52 3 VALID
217 15:05 18:47 1 INVALID
189 16:10 19:53 2 VALID
185 16:10 19:53 3 VALID
181 20:10 23:53 2 VALID
142 20:14 23:32 3 VALID
Thank you for your support.
Tobias has soon
Hello
Here's one way:
SELECT DISTINCT
d.
NVL2 (o.rail_no
, '-INVALID' or "UNVALID", if you really want that
"VALID".
) AS check_row
OF t_plan d
LEFT OUTER JOIN t_plan o ON o.rail_no = d.rail_no
AND o.time_from<=>=>
AND o.time_until > = d.time_from
ORDER BY d.time_from;
If you would care to see instructions INSERT for your sample data, then I could test this.
Two ranges overlap if (and only if) everyone will start before the other ends one. It will be clearer if we consider two ranges do not overlap if (and only if) one of them begins after the end of the other.
This solution assumes that time_from<= time_until="" on="" every="" row. ="" is="" that="" true? ="" for="" example,="" if="" a="" rail="" is="" in="" use="" at="" midnight,="" could="" you="" have="" (for="" example)="" time_from='23:55' and="" time_intil='00:05' on="" the="" same="">=>
-
So far, Firefox always pop - up would be the "danger; you are about to close x number of tabs"window when I tried closing Firefox with several tabs open. Today, however, it just closes directly on my desktop, regardless of the number of tabs are open. "Warn me when I close the tabs" checked in my menu "Tab of Options", but this still does not work. I always get warned if trying to open too many tabs at once, but he refuses to tell me when I close my tabs.
I tried checking and unchecking options, restart the computer, checked my plugins for exceeded those (the only potential problem is Shockwave Flash 17, but the other options to aide said Shockwave Flash 16 was the problem), sought user.js and went almost all the suggestions on the forums. Nothing's worked, and at this point I'm stumped.
(Also, I'd rather have Firefox clear my history when I go out, so just having my restored tabs when I restart Firefox is not my preferred option).
This problem started this afternoon; It was fine earlier in the day. This is due to an update of windows, an update of Firefox, or some strange virus?
THE SECOND UPDATE: I managed to locate the problem. Tab Mix Plus add-on is apparently not compatible with the latest Firefox update. Turn it off seems to have solved the problem for now.
-
Serial number removed during the installation of El Capitan
It's more about post a solution rather than a question.
On my a MBPro 2010 I have that I gave to my mother that I upgraded from Yosemite to El Capitan. After the installation, a dialog box kept popping up asking for a password to iCloud. Entering it, she would get the fan of spinning of death and he locked the computer... also I was unable to download the updates.
After a quick search on the internet I found an article to check if the serial number has been removed... and after I checked, he said order number; Not available.
The same internet article provided a method for reinstalling the serial number, but they wanted me to install a third-party program to do... I was not comfortable doing that.
I went to the local Apple dealer/repair and they sent me to call Apple. I did and had to go to second level support and they asked mt to re - install El Capitan. Done under Apple ID my mother and mine, the MBPro still shows under my name, and nothing has changed.
Is returned to the local Apple retailer and they ran diagnostics and find nothing, but when they had to enter the serial number to run the diagnostic program is re-entered the serial number and everything seems to be fine. Lucky for me that this has been done before they charged me $120 bench tax.
I hope this helps someone out there in the Appleverse...
Looks like you almost fell victim to a certain type of adware. Installation, upgrade or reinstall that OS will not mess with serial number.
-
How can I extend the range of my Airport Extreme (802. 11 a, c) using an Airport Express (802.11n) point. Airport (V635.2) utility does not recognize the Express on its screen? I have to buy equipment? I'm on a MacPro OS X 10.10.5. Thank you.
AirPort utility that ships with OS X 10.10.5 supports base stations as 802.11ac & 802.11n AirPort. It should be able to configure both of your base stations for a scope (wireless connected base stations) or roaming types (base station connected Ethernet) wireless networks.
When you initially configure the Wan, it helps to keep the two base stations in the same room. Once configured, you can move the base station that extend to the desired location. The important key is that the final positioning of the station that extends the base must be understood that it's to expand in order to maintain sufficient bandwidth to the station remotely for clients from network connected. Please check the following airport user tip for more details.
-
Learn the range angle parameter model 4
Hello
I'm converting a few old screws using the model of research work to the last update, and I have a few questions about the range of angle of the pattern learn (or search) parameter 4:
-what degree? (I think that Yes, in the examples, but it is not written anywhere that I looked at).
-the beach is or valid from 0 to 360 only negative values?
-So, if I want my boss to learn for a +/-5 degrees of rotation, I should put-5 and 5, 5, or 355 or?
Thanks for any help,
as said person.i, you can check in detail
what I told you is unit or always use for terminal of vi, but some time can they become different from other vifor example I check again for the part Dmanl is right that it is degree
-
I can no longer send you pictures via my Panasonic Lumix program or the range of file photos. I can via Windows Live Mail but it is tedious to do. The problem started when I change my ISP AOL to Comcast (I think). When I try to do as I have always done in the past, I get this message:
Here is the message I get:
The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider. The rejected e-mail address was '{removed email address}'. ' Subject ' Emailing: PTC Joan Huntsman 001.jpg, account: 'Imap', server: 'smtp.comcast.net', Protocol: SMTP, server response: ' 550 5.1.0 required authentication ', Port: 587, secure (SSL): no, Server error: 550, error number: 0x800CCC78Help! Thank you
original title: have trouble sending pictures
How can I set up/configure Outlook Express, Windows Mail & Windows Live Mail to E-mail from Comcast?
http://customer.Comcast.com/pages/FAQViewer.aspx?GUID=5be34cb1-B190-4FC1-BEAA-818778a54aed -
vlt0204system jury not the safe voltage is outside the range [CF]
Buongiorno,
Ho no problem with a Dell PowerEdge R720 (serial number: GR4ZF5J;) Express service code: 36469475191). He prodotto non e più coperto da co.
He international server there following error e line intervento del supporto tecnico:
vlt0204system jury not the safe voltage is outside the range
In a first, momento lasciandolo spento una notte senza it cavo di side attaccato, muffa ripartito my some giorno dopo e tornato nello stesso stato di error.
Qual'e the procedure più veloce e risolutiva per risolvere he problema?
Grazie e buona day.
the sto contattando by mail
-
Reduce the range of ports for calls crossed - Freeway
Hi all
We currently have MRA deployment but we have a problem with the "Crossing Media port" range set up in the subzone of the crossing. By default, this interval spend 36000 to 59999, but the FW team must reduce this ports open to 36000-36511. Is this supported?
After change of the range we did call Jabber tests in Internet and the call is established, but we have no audio in both directions, after taking a trace with tcpdump in traffic RTP EXP-C/E see the 480XX range.
Any idea to reduce this range without impact in the service?
Thank you!
If you go to maintenance > tools > using the Port, you are able to watch all the different ports inbound/outbound highway has set up, if you are able to edit and change of range, there will be a display/change option that will take you directly to the page of configuring these ports. Don't forget if you are editing a port range, either on the Express-C or - E track, don't forget to check if the other should also be changed.
Maybe you are looking for
-
How to install applications on the desktop firefox?
win xp sp3 firefox v 37:How to install applications on the desktop firefox?
-
Apple made a smaller Mac mini?
Apple made a smaller Mac mini?
-
Pictures of the camera shows a white background
I have the iPhone 6 s and wondering why my photos (say for example of a person with the ocean in the background) appear as the person is too dark with the ocean looking perfect in the background or the person lit up fine, but the background is bright
-
I have already paid and I need help to start
-
How can I remove a possible hacker off my Security Center?
It maintains close and I have to go and turn it back on, I already have ad runs and the virus runs and its still there. Help, please!