Check the disk for consistency

Similar Questions

• How can I check the disc for physical integrity on Satellite P305?

  I have P305-S8838.

  I had some freezing problems earlier this month, and on the notice here, I nu start-up and reduced services a little at a time.
  Now, I have a few more crash but don't know if it's a physical disk problem.

  For example... I have run CHKDSK and does many things and happens at the exact same spot and hangs at step 4 file 5 3498 or 421168 processed.

  I tried to run CHKDSK in SafeMode but tells me drive is locked and it will run when I restart. But the restart put back me in normal mode and get the same hang.

  Now, for more suspicion of a physical problem. I tried to make a disk image with ACronis and same problem occurs because he says impossible to reading data 226 964, 072 sector and ask if I want to ignore and continue. I say yes to everything. Log shows he made about three of these attempts and crashes.

  I ran sfc/scannow and it says found problems that he was unable to fix. The newspaper isn't so long and complex course that all means. I could send these log files if someone can help me understand.

  I ran the test of memory OK.

  I if I could put in DVD Toshiba and certain diagnoses, but when I put in the disk I get this big warning I'll crush, etc and I have chicken.

  This didn't stop me to use the computer, but its all irritating.

  How can I check the disc for physical integrity?

  Bob

  Hello

  He idea goo to check the HARD disk and run some diagnostic procedures.
  For this, I recommend the freeware tool called Drive Fitness Test.
  It allows you to check the HARD disk for certain physical defects.

  Google for this tool. You can get it from multiple pages download

• Trying to backup computer, get the error message "the C: drive has errors" "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. »

  I'm trying to back up my computer and so I went to back up files and attempted to save DVD RW Drie (f), then recovery (E :).  Then in the form following, I clicked on next, and I get the message "the C: drive has errors" error "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. "I hit the" check the drive for errors and it told me that windows can't check the disk in use then I hit the schedule disk check. "  and then nothing happened.  What should I do?  How can I save my files?

  I planned it, rebooted, and nothing happened.  I have tried three times now

  Hey Ruffscicle

  read the information on how to run the check disk at the link below vista64.com

  If the first method does not work, try the other methods

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  have a Happy New Year

  Walter, the time zone traveller

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no dound I did a windows update, but no sound came through, please help me

  Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d

  the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song

  Thanks for any help

  Hi, Pantha9,

  What version of Windows are you using?

  Start > right click on computer and select Manage

  Select Device Manager

  Click on the + next to sound, video and game controllers

  Right-click on the driver and select uninstall

  Restart the computer and Windows will reload the driver

  New attempt of his

  Access the site of the factory and search for driver updates

• Lost the disk for my Canon Pixma ix6820 installation, is there something I can download instead?

  I lost the disk for my Canon Pixma ix6820 installation, is there something I can download instead? It is a mac.

  Thanks for any help or ideas.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_corporate_graphics_art_p...

• All build-in tools to verify the health of the disk for XP?

  Anyone have any suggestions on any build-in tools to verify the health of the disk for XP?

  Thanks in advance for your suggestions

  http://www.labnol.org/software/test-hard-drive-for-problems/17430/

  Try this Web site. :)

• A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  Error comes when you try to connect.

  -able to login in safe mode

  -J' tried regsvr32 regwizc.dll, regsvr32 licdll.dll from start-> run

  -Tried system restore

  Any other solution?

  Hello

  • What were the changes made before the issue started?
  You can check this link:
  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer
  http://support.Microsoft.com/kb/914232

• Troubleshooting of League of Legends asUnspecified error has occurred. Check the logs for more information"?

  Original title: League of the legions of troubleshooting

  I downloaded League of the legions, but when I try to run it, he will not work he arrived asUnspecified error has occurred. Please check the logs for more information. Please help I don't know what to do?

  Hello

  1. You are making reference to League of Legends?

  I suggest that you do check and clean boot, if that helps to resolve the issue.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

• How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.

  How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Thank you.

  * original title - full hard drive. *

  Using XP: I have only about 2 GB (2 000 MB) of the programs on my hard drive Go 37 and less than 3 GB of space left.

  How can I find and open/search the 32 GB of data that fills the disk for possible deletion?

  Thank you.

  Download and run JDiskReport.

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a larger hard drive.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files to delete or uninstall applications.

• I can't initialize the disk for my new external hard drive

  I can't initialize the disk for my new external hard drive because the drop-down list in the Disk Management Console does not give me this option. I'm logged in as an administrator and running Windows XP.  The driver for the new hardware is not digitally signed because I can't initialize the disk.  So I can't get my new hardware to run.  Does anyone have any ideas on how I can get the option "Initialize disk" in the Disk Management Console?

  Hello Honduras1,

  Can you simply right-click and format everything first?  The drive must be formatted before use, make sure that you format NTFS.

  See you soon

• Solutions error checking the disk and Restore Point, pointing to the other.

  Yesterday, my wife picked up the package of virus Security Suite from somewhere and remove, I picked up an error when the disk check runs at startup. Check disk claims it is an error, check the drive and suggests restore since my last restore point. But when I do this, restore the system claims I have a disk error and I need to run the disk check. Which brings me right to the beginning of this problem.

  I'm running 32-bit Windows 7 Home Premium, and have enabled the Windows updates. I use AVG and Malware Bytes to protect my system.

  Thank you!

  Bill Haworth

  You can run check disk from safe mode? This is a level of command prompt:
   
  CHKDSK x: /F /R
   
  Where x: is the drive that you control.
   
  "bill_haworth" wrote in message news: 9c836e2b-b164-44a7-b516-5d5302cca9bf...
  > Yesterday, my wife picked up the package of Security Suite virus from
  > somewhere and back, I picked up an error when running the disk check to
  > start. Check the disk says there is an error, check the drive and
  > suggests restore since my last restore point. But when I do
  >, System Restore claims I have a disk error and I need to run
  > Check the disc. Which brings me right to the beginning of this problem.
  >
  > I am running 32-bit Windows 7 Home Premium, and made Windows updates
  > on. I use AVG and Malware Bytes to protect my system.
  >
  >
  >
  > Thank you!
  >
  > Bill Haworth
  >
   
   

• Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Hi Anandsable,

  The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.

  Hope the helps of information.

• PDFMaker, Options, create PDF/A-1 a in Word. Where can I change the setting so I did not check the box for each file, I create?

  PDFMaker, Options, create PDF/A-1 a in Word. Where can I change the setting so I did not check the box for each file, I create?

  Win OS: Windows 7

  Acrobat 9 Pro

  Hello

  You can do this to change the registry settings.

  Go to run type Regedit to open it.

  First make a backup of the registry.

  Here is how do.

  Go to HKEY_CURRENT_USER > software > Adobe > Acrobat > PDFMaker 9.0 > > Word > settings

  You need to change the DWORD values & chain listed below.

  Chain: JobOptions

  Value: PDFA1b 2005 RGB

  DWORD: PDFComplianceIndex

  Value: 1

  DWORD: PDFComplianceLevel

  Value: 1

  Close the registry editor

  Thank you

  Abhishek

• I got the U44M1P2003 error message, while Adobe has tried to upgrade my PSE12. Then I checked the registry for the location of the correct software and off my anti-virus program. I tried the upgrade again, but received the same error message. What to do n

  I got the U44M1P2003 error message, while Adobe has tried to upgrade my PSE12. Then I checked the registry for the location of the correct software and off my anti-virus program. I tried the upgrade again, but received the same error message. What to do next?

  Please see:

  12.1 error installation update | Photoshop Elements, first Elements

  Update the items 12.1 fault (U44M1P2003)

  I hope this helps.

  Concerning

  Megha Rawat