check the integrity of the blackberry_jde_7.0.0.exe

Similar Questions

• How can I check the disc for physical integrity on Satellite P305?

  I have P305-S8838.

  I had some freezing problems earlier this month, and on the notice here, I nu start-up and reduced services a little at a time.
  Now, I have a few more crash but don't know if it's a physical disk problem.

  For example... I have run CHKDSK and does many things and happens at the exact same spot and hangs at step 4 file 5 3498 or 421168 processed.

  I tried to run CHKDSK in SafeMode but tells me drive is locked and it will run when I restart. But the restart put back me in normal mode and get the same hang.

  Now, for more suspicion of a physical problem. I tried to make a disk image with ACronis and same problem occurs because he says impossible to reading data 226 964, 072 sector and ask if I want to ignore and continue. I say yes to everything. Log shows he made about three of these attempts and crashes.

  I ran sfc/scannow and it says found problems that he was unable to fix. The newspaper isn't so long and complex course that all means. I could send these log files if someone can help me understand.

  I ran the test of memory OK.

  I if I could put in DVD Toshiba and certain diagnoses, but when I put in the disk I get this big warning I'll crush, etc and I have chicken.

  This didn't stop me to use the computer, but its all irritating.

  How can I check the disc for physical integrity?

  Bob

  Hello

  He idea goo to check the HARD disk and run some diagnostic procedures.
  For this, I recommend the freeware tool called Drive Fitness Test.
  It allows you to check the HARD disk for certain physical defects.

  Google for this tool. You can get it from multiple pages download

• Trojan.ADH.2 cleaned out XP Pro SP3; Suspect that some damaged XP files. Y at - it a utility to check the integrity of the file XP?

  Disconnected PC of the web in order to prevent the spread to other units. Under logon admin school, used current analysis complete AVG, Norton, & System Mechanic Pro & own utilities. Now able to use the main admin connection, however PC remains disconnected from the web.  Nothing I can put my finger, but the PC does not not like before.  Suspect damaged due to XP files by Auger or cleaning utilities.  Y at - there a utility that can check the integrity of the XP removal or is a scrub & charging necessary?

  Hi NoelJohnston,

  ·          What are the issues on the computer after removing the Trojan computer virus?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• check the integrity of the installation program has faild: I couldn't install sogou Chinese pinying entry-type express program

  I want to type Chinese characters in a faster manner, so I decide to install sogou pinying grosgrain.  After I downloaded the program try to install it, I found that I was not able to install it.   I downloaded 2 of the program, two of them could not be installed.

  The computer shows:

  Check the integrity of the installation program has faild.  Common causes include incomplete download and damaged media.  Contact the author of the installer for a newcopy.  More information.

  http://nsis.sf.net/NSIS_Error.

  Hi Cheryy,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you can not install sogou Chinese pinying express in the computer.

  Method 1: Run the Fixit to solve common installation problems:

  Step 1:

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Open the troubleshoot program compatibility utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

  Method 2: Temporarily disable the security software and firewall settings and check if you are able to install:

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Put your computer in normal mode when you are done to solve the problem (as described in step 3 in the article above).

  Please report if you are still having the problem. I will be happy to provide you with additional options.

• Checking the referential integrity of a form before the presentation of the Page element

  Hi, OTN,.
  
  I have a form on a table with multiple columns, some of which are foreign keys to other tables. Rather than validate the columns for referential integrity when the user inserts/changes in shape, I would use a dynamic action to attract the attention of the user with a javascript alert() when the user loses focus of the element. After a user enters a value into the text box and moves to the next item, I want to be able to query the table, check the existence of the value of the user and issue a javascript alert() if there is no match.
  
  What is the best way to go about this?
  
  I created a dynamic action-to run PL/SQL code on one of the elements of the page, with a code similar to the following:
  
  DECLARE
  rf_check varchar2 (30);
  BEGIN
  SELECT col1 INTO table_a FROM rf_check
  WHERE col1 =: P1_ITEM_FK;
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  HTP.p ("< script type =" text/javascript"> ');
  HTP.p ("alert ("ERROR");");
  HTP.p ("< /script >" ");
  END;
  
  I could not get the dynamic action of delivering javascript. Any thoughts?
  
  Thank you
  
  Matthew Moisen
  
  Published by: Matthew Moisen on 25 October 2012 14:22

  Matthew Moisen wrote:
  What is the best way to go about this?

  I have to admit that I've never tried, but I would be surprised if Javascript back via statements made htp.p that they are actually executed by the browser.

  I would do something like that, by a dynamic action that calls an application process. The PL/SQL procedure request would return via htp.p OK or ERROR. From this result, the javascript would determine to issue the alert. Something like the following (not fully tested):

  Javascipt
  
   var get = new htmldb_Get(null,html_GetElement('pFlowId').value, 'APPLICATION_PROCESS=FK_CHECK',0);
   var fk_check = get.get();
  
   if (fk_check=='ERROR')
    {
     alert('ERROR');
    }
  
  Application Process FK_CHECK
  
  DECLARE
    rf_check varchar2(30);
  BEGIN
    SELECT col1 INTO rf_check FROM table_a
    WHERE col1 = :P1_ITEM_FK;
    HTP.p('OK');
  EXCEPTION
    WHEN NO_DATA_FOUND THEN
       HTP.p('ERROR');
  END;
  

• How to manually check the integrity of the catalog?

  Is there a way to manually check the integrity of the catalog? In my opinion, what he does when he runs the backup, but I don't see a manual option for this. As soon as I made a lot of changes, I would be able to do it manually.

  There is no manual option. It is possible when a backup is performed.

• Pavilion DV8 wants to check the integrity of the disk at startup

  more boring and tedious. I checked the drives using speedfan and they seem ok. Any suggestions?

  the effect disappeared. System works well. Thank you very much

• ThinkPad R60 could not start beyond "checking the status of the integrated security chip.

  I am unable to load the OS-Windows XP because of the layout I did successfully:

  The system worked more slowly, I went to the troubleshooting of windows... and follow the procedure below:

  "' Help-> Pick a task-> use tools to view your computer information and diagnose problems-> SYSTEM-> Changed CONFIGURATION UTILITY to" START DIAGNOSTICS "and restarted the computer...

  But unfortunately,.

  My system is unable to exceed... "" Checking the status of embedded security chip ' and windows does not load.

  If anyone has the solution pl... answer a few important information lies in...

  Thanks in advance.

  I think that the error message says do not keep your finger on the key during the startup of the whole. Just press it several times in the time the windows logo should normally appear.

• I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not!

  I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  Mini092911 - 02.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 116
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9

  AND:

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  WD-20110929-1029 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3

  Hello

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
  is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
  and ask in their forums known issues.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  ----------------

  BCCode: 117 0 x 00000117

  Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

  BCCode: 117 0 x 00000117<-- read="" this="">
  * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

  1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
  of (card mother manufacturer custom systems). Check with Nvidia Support and forums.

  2 are looking for Virus/Malware.

  3 check the hard disk for errors - run Checkdisk (see below)

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error - Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer

  Original title - Vista sp2 64-bit windows program update is not running

  When I open the program "Windows Update", it has an "X" in a red shield symbol.  When I click on the tab "Check for updates", I instantly get a message that says: "the Windows Update cannot currently check for updates, because the service is not running."  You may have to restart your computer.  When I click on the button 'Start' and the window appears with the options of closing down, change user, registration, etc., the first button shows an orange exclaimation mark and when selected the computer seems to make an attempt to download whatever it tries to download.  However, it never downloads anything, and the rest of the exclaimation mark orange.  How can I solve these two issues?  I'm guessing that repair will set the other.

  Hi doubleott

  
  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  Method 2:

  You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same.
  http://support.Microsoft.com/kb/971058

  I hope this helps.

• Check the archiving functionality does not work

  Hello

  I'm trying to find out what is the syntax for checking the Archives after it is created. The example of gui says:

  Path local example: D:\work\archive

  I guess that's the part of the path just before the directory AABackup but when I run a check it says that he succeeded for a second and he said: 0 bytes verified.

  I also tried the AABackup directory and also the hexadecimal numbered directory as well.

  I also tried with and without creeping.

  All the ideas!

  Appassure version is 5.4.2.228 running on Windows 2008 R2

  Hi Darryn.hatfield,

  Check in the 5.4.2.228 build archiving functionality verifies the existence of the archive files must include (datafile.bin, index.bin, etc.). Build in the future (5.5.1 and higher) it will run check the metadata feature, of the integrity of the data, checksum data integrity and mark location of archive.

• Check the page in my basket?

  Hi - I want to add a page to check the payment procedure where a customer can check, modify and verify their purchase information before clicking on 'submit '. Does anyone know how to do this?

  Thank you

  I guess you want a page with all the information, including their details of shipping, names, address, etc, more information basket and sort of button large transaction confirmation. You can do two ways.

  1 client side with a "confirm page" generated by javascript, basically, you pass the content of the page.

  Pro: easier to implement, total client-side.

  Cons: Simple solution, but sometimes it's all you need.

  Example:

  http://jsfiddle.NET/AMjkN/

  Remove:

  http://forums.Adobe.com/message/5612324#5612324

  2. create your own control by using the API.

  Pro you can control everything in what concerns the ordering process and easy integration with other systems, you may have in place.

  Cons: more than one business solution. Requires an external hosting and has fees monthly (hosting) the initial development costs.

• "CFADMIN", "there was an error while checking the token. The session has expired or UN-bel

  People - I am really stumped on this one and need help.  I train a new employee on our CF 9.0.2 EA environment and I wanted him to run some of our scheduled tasks.  I had to open a session in the production with the admin site and password (one-time password using only the id of cfadmin "generics") without incident.

  He sailed to the scheduled tasks without incident, clicked the button "Run the scheduled task" and upward jumped a message to open a session in Administrator CF.  Never, ever have I seen this happen before.  I checked, and no one else was recorded in the CF administrator at the time.

  The application log contained the following warning: "CFADMIN", "there was an error while checking the token. The session has expired or unauthenticated access is suspected. »

  I have google, Yahooed and anything else in the meantime and can only end of references to CF10 and single account sessions.  Yet once we checked it was the on using only the administrator see  (I know because I am just another one who knows the admin password).  We are all both in the same group of security for the server (Windows 2003 R2) administration have the same level of security to the database - read-only (MS SQL Server 2005), but none of this is important since we are through THE and by using the IUSER or IWAM permissions.  Doesn't seem to matter if the integrated Windows authentication check or not in IE options either.

  I tried to separate application ID and password security - but I got the same error message.

  All ideas are most appreciated.

  Libby

  Charlie - thank you very much for your help.  Although you have identified the real problem, unfortunately I have always a solution.  But I kept in the back of my mind...

  But just recently, I was hit with this same problem myself.  As a last resort, I clean my cookies and all my temporary Internet files.  For me, that did the trick.

  My store is running the most vanilla of CF9 environments possible, Web site instance unique, the only database MS SQL Server, IIS 7 on a Windows 2008 R2 server.  Absolutely not the bells and whistles.

  Again, thank you for taking the time to read my post and you offer thoughts and support.  Without the help of specialists like you - well - I don't know where I'd be.

• Check the status of the Table views

  Hi all
  
  I would like to check the status of the Oracle Table and the view that the procedure we had on the another db and we trying to replicate that after the passage of Oracle g10.
  There probably too much sence at all for Oracle, but I can't say that as a new user, I'm sure that wilwl RAISE exception if something goes wrong, but still, we are then. Too much heritage, etc...
  These points of view in question created every day with a lot of logic, that is why we do that (I think).
  What would be the path of the right way to do it? I can surely do SO (SELECT COUNT (*)... > 0) THEN OK, as we expect those table alwayse be filled with something, but is there a way to check how healthy all elect, constraints, etc...
  These VIEWS are quite large, almost 500 K lines.
  
  Is there any CHECK in Oracle, as in some other languages/platforms.
  
  
  Thank you for your comments, probably I'll get armed good enough to convince someone don't do it-)
  
  
  Best
  Trent

  SQL> select status, count(*) from dba_tables group by status order by 1;
  
  STATUS        COUNT(*)
  -------- ----------
  VALID            2834
  

  The same can be done for the INDEX.

  Please trust Oracle in order to maintain the integrity of the data.

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.