'Check the updates of Windows', has not highlighted, lack of "Updates of history"
My Windows Update is unable to work. 'Check the updates of Windows', has not highlighted, lack of "Updates of history". Failed to check the updates. There is no virus, spyware, unwanted software detected. A similar experience?
Thank you for your response. The Scaner Windows has the result of no viruses, etc..
I have solved this problem in line with someone, i.e. first stop the service update of Windows, and then delete all the files in "C: Windows/.../Softwaredictribtion/datestore", finally restart the update of Windows. Now it's working.
Tags: Windows
Similar Questions
-
I have an ifone6 that is not recognized by iTunes. It has a newer version of iTunes, but when I check the updates, it says I have the latest version. Thinking that it is a matter of Win XP. Thanks for help.
You can run the latest version of iTunes for your version of Windows, but you are not running the latest version of iTunes is available and it's iTunes 12.3. You must run Windows 7 at least. I'm not a Windows user, but I think 7 is newer than XP.
Check this.
-
My computer stops the update via WIndows Update Component
Whenever a try to do the manual update using this component I get the message; * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...
My computer has a few updates, but can not run these update
Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating
He starts to run updates 1 of 13... and stops
If I shutdown normal e, computer stay likehanging 1 hour without stopping.
I would like to know how to solve this problem
Thank you
Concerning
Gladmar.
Hello
Were there any changes made on the computer before the show?
Perform the following methods and check:
Method 1:
I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:
a. click Start, type services.msc and press enter.
b. search Windows Update.
c. right-click on the service and select Properties.
d. in type of startup, select enable.
e. click Start under the Service status.
f. click OK.
g. Repeat steps c to f for the following services:Background Intelligent Transfer Service
Cryptographic servicesIf the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.
Method 2:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Method 3:
Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareNote: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 4:
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
See also:
Troubleshoot problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesUpdates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questionsI hope this helps.
-
Window could not check the update
I bought a new laptop Toshiba Satellite A500/02J and install Windows 7, 64 bit.
The problem is that when it's time set to automatic update of Windows 7, the message "window could not check the updated" comes top-code 8024402F - "window meeting unkown error."How can I fix?
Thank youJin
This question is discussed:
http://www.Vistax64.com/Vista-General/115708-Windows-Update-error-8024402f.html
This is for Vista but can be also useful for Windows 7
-
OP: Action Center... PC problem: 1 important message
After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?
Hello Irfan,
Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate. Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me. On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers. Not the only one, I have is the product key which is one 25-alpha-numeric. I tried to enter only and does not pass. This is why I say that I can pay for help since I did not ' have the product ID. Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think? If you can get back on track, I would be very grateful and thank you once again to be a big help!
wandrinstar
Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.
Keep up the good work,
wandrinstar
-
Original title: Impossible to update Windows 7 on Netbook
I have a Samsung Netbook running Windows 7, but can not run Windows Update
Each ime that I try to run the update, I get the following message.
Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
Hello
Follow the steps from the links below and check if the problem persists.Method 1: Run the Troubleshooting Utility from the link below and check if it helps.Problems with installing updatesMethod 2: Run the FIXIT in the below mentioned link and check if it helps.How to get the latest version of the Windows Update Agent to help manage updates on a computer?Hope this information helps. -
Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.
I am currently using windows 32 bit vist
I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!
Suggestions?
Hello
1. have you made changes on the computer before this problem?
2. which antivirus app do you use?
I suggest you try these methods and check.
Method 1:
Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registryMethod 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.
Follow these steps:
a. click the Start button, click computer.
b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
Where 'C' is the drive of operating system
c. delete the log file, and then restart the computer and check the issue. -
Windows Vista SP2 from worm 6.0.6002 Build 6002. KB2675157 Explorer 9.0.8112. Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall). My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running. I ran last update of Windows in April and he was properly executed. I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started. I am able to run updates on all the software outside of windows. I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products. I don't have another PC with Vista I can compare the registry entries.
Hello
Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/
Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058
Method 3 :
Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
My computer (windows vista) is not able to check the updates of windows, anyone able to help?
My computer (windows vista) is not able to check the updates of windows, anyone able to help? I get the following error message
Hello
What error message?
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum, INCLUDING the error message
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Whenever I have click search for updates in Windows Update and it just gives me the error message: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer. Can someone help me please? I'm using Windows Vista Basic
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
I can't check the updates with Windows 7 computer
I have a Windows 7 laptop. When I check the updates, I get error code 80072F8F. No matter what I do to update the date and time, it may not always check the updates. The last successful update was on September 19. I tried to ask a person to Microsoft through online help. She had me try all sorts of things during the past month without result. Finally, she transferred my problem to his supervisor, who told me that I had to completely reinstall Windows. I don't have a disc of Windows 7 because it is preinstalled on my laptop. She then told me that she would transfer my problem to a COMPUTER technician who would call me. No one has called. I have sent to let her know I had not heard anything, and in response I received an automated email stating that my problem has been resolved and that my case has been closed. Someone please help! My computer has not had an update for 3 months!
This isn't the problem, as I said in my question above. It has nothing to do with the date or time.
I just found an answer, tried and it works!
Here it is:
MikeGrimes
2Already votéPLEASE NOTE: The following instructions are specifically for ESET Smart Security or NOD32, however, I suspect other programs where content filtering of the SSL connections may cause this problem too.
You run ESET/NOD32 Antivirus? If Yes and you have active SSL protocol filtering you add an exception
(1) open the main window of ESET by clicking the ESET icon next to the clock system or by clicking Start > all programs > ESET > ESET Smart Security or ESET NOD32 Antivirus.
2) press F5 on your keyboard to open the advanced configuration window.
3) navigate to Antivirus and antispyware > protocol filtering > SSL. Click on "ask on sites not visited (exclusions can be set). Click OK.
(4) check the Windows updates
(5) a pop - up of ESET will inform you about an attempt to communicate over SSL. Click on exclude.
(6) that excludes the verification by ESET update Windows. Exclusions are kept in the Antivirus and antispyware > protocol filtering > SSL > Certificates > excluded certificates.
(7) to navigate back to the Antivirus and Antispyware > protocol filtering > SSL. Restore the SSL filtering to your previous setting mode, that is to select the option "Always scan SSL protocol".
(8) check the option ' apply created exceptions based on certificates "is selected. Click Ok to close the advanced settings window.
Alternatively, you can simply disable SSL filtering in step 3.
-
Windows cannot check the updates - C800044E error code
Hello
Since yesterday, I get a notification icon in the taskbar indicating that windows cannot check the updates. If I click on the icon and then click on the button "check for updates" in the new window, the search end reports that an error has occurred and the error code is C800044E. This happens every time after the computer starts and when I try to manually check for updates.
The operating system is Windows Vista Home Premium 32 bit with OEM license.
I already googled for this error code, but none of the suggestions found during the search worked. Mode by default with no results, I installed the MicrosoftFixit50202 (have not tried yet aggressive mode). I ran the malware Microsoft Windows (without threats found) removal tool. I downloaded and installed manually the KB947821 update for vista, also without results.
The last successful update is dated more than a month previously, and I assume that at the same time, some important updates may appear. Can someone help me with this problem?
I've already solved the problem by using the system restore (I used a restore enjoyed a week point).
I'll answer your questions anyway, in which case this may help solve one similar problem to others:
1 Vista SP2 (all updates important/critical installed as of October 1, 2010)
2. Eset NOD32 antivirus/antispyware with current subscription. No third-party firewall (just the windows firewall).
3-4. I have never installed a Norton or McAfee application on this computer, but I'm not sure if a trial version of Norton AV is pre-installed with this computer (if it did, I removed it when I originally set up the computer - almost 3 years ago).
-
Windows cannot check the updates. Error 80070490 failed since 10/23/09. Windows Update will not work. I haves Windows Vista Home Premium SP2
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537
Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.
Uninstall SP1
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.
I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
Then I used my disc XP Home (SP2) update. I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update". I, then, just kept hitting the page update and restart, until I find the SP3. Then, I took a break, until the next day.
I have an ADSL broadband, with a Linksys EtherFast PCI card.
Then I got SP3, which installed without any problems.
So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night. I think that I ticked the box "don't ask me about this update".
Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"]. What showed was 1 update - 955759 KB.
After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U". There is no updated list. Then I checked through my history of update (twice), and KB955759 had not been installed.
My update setting is to let windows download ('important') updates, but let me choose when to install them.
What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.
Comment 2: If you will not contact the MS Support on this issue?
~~~~~~~~~~~~~~~~~~~~~~~~~~
Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]). Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...
Repost...
1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?
2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)? .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed? .. .and if so, you manage to install it?
3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer? .. .and if so, you manage to install it?
... I guess that clearing the browser cache does not erase 'downloaded' updates.
Nope. If you want to clear the queue of the update...
OPTION A:
1. stop the automatic updates service:
Start > run > (type or copy/paste) services.msc > click OK
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
Open the download folder and delete its content
Close the window.3. start the automatic updates service:
Start > run > (type or copy/paste) services.msc > click OK
Double-click automatic updates > click Start
(Starting the service will take a moment)OPTION B:
1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]
2. make disappear/close the Troubleshooter automatically pop up.
3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]
4 reboot.
Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]
Check the located log file...
C:\Windows\Debug\ MRT. NEWSPAPER <>
Related...
... This leaves us with the malicious software removal tool don't appear not.
I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]
It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!
================================================================
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list. -
Vista SP 2 x 86 32 bit
Compac Presario SR2180 NX
disk defragmented
the disk check run without error
Registry verified
Norton Internet Security 2011
Norton Utilities 14
1 single antivirus running
A previous audit of update 27/09/11. I downloaded and installed manually updates failed. I followed all the links from Microsoft and others. I can't always check the updates. The update is running for hours and then said: he can't check the updates. My pc can't sleep or turn off automatically. I tried the fixes recommended running but can not install them. The program runs for hours. I can only stop it by using the power button to turn it off. Everything seems to work fine otherwise. I use Norton Internet Security 2011. There are no viruses or other problems, he can find. I ran the disk check, no errors have been detected. I spent hours trying to solve this problem. Every step seems to take me one step closer to an answer, but not enough to solve the problem. Any ideas? The updates have been downloaded and has not installed were all related to the .NET Framework 4.0. NET 4.0 has been installed on my PC in 2009.
Hello
Tried all of these options with no improvement. Stumbled upon an answer that described enter deeply into the Windows registry. (I do not remember where it was.) I had checked before, some of these files, but not these. Some of the updated files were missing. I backed up everything and put the recovery disk in. Success at last! My PC and I are both happy now. I'll bring back had more than 100 updates that should be downloaded and installed. I didn't know if I'd do them all at once, so I started with some of the older ones, but they have not all install. Then checked to install them all. Updates made in the order of most importance and in the right order needed. I had to do some updates more than he has found since then. I am really satisfied with the result. I'm going to put programs and files back on my PC for some time, but I'm not tearing my hair. Maybe this will help someone else. Thanks for the suggestions, all help to improve my knowledge about computers.
Maybe you are looking for
-
Way to increase the sensitivity of the volume control on Satellite P300
Hello I was wondering if there is a way to increase the sensitivity of the volume control on my P300? On my old toshiba, it's maybe 1 full rotation of the minimum to maximum. On this one, it seems that you are there for about 5 minutes fiddling aroun
-
Looking for numbers of HARD drive
Hi guys,. I do a lot of service for hp printers and their two especially one in particular that we have a lot of problem hard drive with the ch 3035 that come with that disk hard western digtial blue. I am looking for the part number for the black we
-
4300 WNDR media server is not available
Hello. I have configured the media server on my WNDR 4300 and I checked that the connected USB drive is "authorized" (extendent USB setting). However, customers DLNA cannot connect to the system and it is not visible in the network. I tried iPhone Mo
-
get the error (0 x 808005) when you try to change the backup settings
need to change backup settings I get an error (0 x 808005) how can I take care of this problem
-
Unable to stop the computer in the start menu.
Original title: stop problems I cannot shut down my computer (laptop) in the start menu. The option is there, but when I click it the computer does not turn off.