Check with remote control

Similar Questions

• Satellite P500-1DZ starts only with remote control

  Hi, I just bought a new laptop Satellite P500 after owning a P200-13Z and P300-160 years without ever having had a problem with one of them.

  I have a problem with the P500-1DZ that I bought because it does not start the power button when he was arrested for a period of time, as for example the night.

  If I stopped and immediately press the power button its fine and it starts as well with the remote control.

  In the BIOS, I noticed that there is an option for remote start to the top of the control that is enabled, but Im a little worried about this deactivation in case I can't restart the laptop... everyone has ideas?

  Also for other users of the P500 who are dissatisfied witht the audio output of the laptop, I fixed that uninstall the Audio drivers Connexant HD, then by restarting which allows Windows to install its own audio drivers... which has greatly improved the audio output of the laptop... even if its not as good as the old P300.

  Thank you

  Hi spidercpfc,

  This question really strange s with this start of the issue and I think that it of difficult to say why it happens exactly, but as written Akuma you should try upgrading the BIOS. You can download it from the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Last week I updated the BIOS of my P500 also and it worked, I t has not had any problems. I updated the BIOS to the version preinstalled Windows as an administrator. Also, I closed all programs running (AntiVirus, Firewall, browser, etc.) and disconnected from the network. After a few seconds the update was done.

  After the update, you should also load default settings in the BIOS. So press F9 in BIOS setup and save these settings.

  I hope this works. :)

• Problem with remote control in Windows 7 Ultimate

  Hi guys,.

  I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit

  the remote control has stopped working & I tried to look for a solution but no luck.

  Please can you help me with this problem

  Thank you.

  Published by looks on 02/11/2009 04:51

  Hi Jajomafa,

  My problem was resolved a few days ago.

  There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.

  The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)

  I suggest that you run the automatic update.

  I hope this helps.

  Kind regards.

• Toshiba SD - 63HK Home Theater system with remote control problem

  I have a Toshiba SD-63HK home theater system. Suddenly, the remote doesn't work this morning - I changed the batteries and it has no effect. Also tried again taking the DVD Player off the coast of the socket and of suite, and this doesn't have to do anything too. Someone at - it ideas? Everyone knows about similar problems with this system?

  Guess what; you are the first user of this forum that opened a thread on the Toshiba SD - 63HK Home Theater

  This system multimedia isn't known to me, but if your remote has stopped working and the batteries are not the reason for this problem; Then, there must be some kind of hardware malfunction.

  Maybe you can order this remote separately try to search on the internet for this part

• Try to set markers to jump through DVDs with remote control?

  CS5.    I would like to know how to jump through a long DVD with control away from the player.  I tried defining markers, first non numbered then numbered and it did not work with the DVD when I played it on the VCR.  I remember with body 2.0 when this technique could work.  You can even automatically assign markers every so many minutes.

  You need chapter markers again. Those that can be added in PrPro, for importation en (Note: If you export and then import to en, not all formats will carry these markers), or can be added in fr.

  PrPro 2.0 was the last version for DVD authoring. Now, all creation is done in again.

  Good luck

  Hunt

• yet cs6 chapter selection with remote control and button title

  
  Good evening... I imported links Dynamics throug a sequenco to still cs6. There are already some chapters, but if I press preview and I click Start film is not skip to the next chapter... No preview... I can skip chapters only if I start to see the movie from a chapter (2-5-7 is not important the number) in scene selection menu... could you tell me how I can solve this problem? Thank you... and to play on the menu... If I want to return to the main menu, once the movie started, he returned to the scene selection menu, not to the main menu... could you tell me what can do to solve these problems? Thank you so much everyone

  Please post a screenshot of your chart again.

• Remote control for Toshiba Multimedia Center

  Hello everyone!

  I don't know how to make my remote for the Toshiba multimedia center work. The only instructions accompanying the product as a whole were safety guides and a quick installation guide, but nothing about setting up the remote control. When I press any button on it, the Multimedia Center are turned on, so no doubt is picking up a signal, but it does nothing. The only button that sometimes doing something is the key mute. I went into the remote control and OSD settings, and everything is checked. Remote control model is the RM-1500 and I changed the sensitivity settings, but none of them seem to have no effect. I'm trying to use it with Creative MediaSource Player, which I assume must have native support for it, but nothing works. So can someone please help me how should I set up?

  In addition, to support the application in the settings, what should I write in the 'parameter' and ' start in ' field?

  Thank you very much!

  Hello

  I m not similar with this Toshiba product but I suppose that the remote control doesn t need to be addressed in the special order
  I guess the Source Creative Media Player is not compatible or don t support the Toshiba multimedia center

• Allow the remote control of my player, can not be selected.

  When I try to check "Allow remote control of my player" in WMP on Windows 7, I have the box standard dialog, where I confirm my choice, but after that nothing changes. The menu option "Allow remote control of my player" is not always verified.

  It works fine on a couple of other machines, but not on my main machine. I reinstalled Win7 some time ago, when the final version is out, but he showed the same problem as the beta already had.

  Any ideas?

  Do a system restore point.

  Use Regedit.exe

  Go to HKEY_CURRENT_USER / Software/microsoft/Mediaplayer/preferences

  Remove the keys from DMR.

  Problem solved.

• Do I need local listener to use dblink with remote DB?

  Hello
  It seems probably stupid, but I wonder if we really need local listener upward and running when connecting via dblink with remote control.
  In other words when we using a db_link local listener somehow interacts or is that our session local <>- remote_listener-> remote_db?
  I think the version is unimportat here, but say that from 9.2 to 11.2.
  Concerning
  GregG

  Yes. ...
  his will be like any session on tns really, you connect to the listener, he gives you to the upper hole that connects you to the remote database.

• Two Apple TV - remote controls works with both at the same time

  Just bought the Apple TV 4, this means that I moved my old version 3 Apple TV in the room, when I use a distance the two Apple TV now respond. How can I connect the remote control for the Apple TV right, to keep them from harm?

  Try this:

  Désapparier money ATV3 the remote control by pressing menu and left for 6 seconds.

  Block the front ATV3 and remote peer with the ATV4 the silver medal by pressing menu and right for 5 seconds.

  Block the front ATV and press menu and the central selection button for 5 seconds

  Unlock the ATV4 and check that it does not meet the silver remote.

  Block the ATV4 and unblock the pair by pressing menu and right for 5 seconds and ATV3.

  Check the ATV3 now responds.

  Remove the block of the ATV4.

  A beer...

• Remote control not working only not with the G10

  Hello
  my remote was working initially. now it does not work in Qosmioplayer or WinMCE mode. The red light in the receiver when you press the remote control in order to do not a dead battery! any suggestions as to what was popular up

  Hello

  Have you installed any other tools or utilities, or have you changed a few settings?
  As far as I know you need the infrared receiver only to control the MCE Win.
  The receiver is plugged into the USB port. Please check in Device Manager if the receiver is recognized. Also, check the cable of the infrared transmitter is also related.
  However, if you are working with the Qosmio player receiver should be removed from the unit.

  Moreover, in the user manual, you can find useful information about the remote control

  Best regards

• Need help with my Toshiba remote control and receiver for Qosmio G30 161

  Hi all

  I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

  I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

  Also to confirm that I'm under addition of Windows XP MCE.

  Anthony Worlock

  Hello

  This remote will work, if you use it without any special drivers and special software, only in the Media Center.

  But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

  Please try this tool and check if it works.

  By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

  Welcome them

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• Problems w/Microsoft eHome keyboard keys on remote control on my Toshiba Qosmio X 305 - Q701 with Vista Home Premium 64-bit

  Hello, I decided to trust someone w / helping me to improve the performance of the system by closing some services using msconfig, although I have some keys on my keyboard that interact w / drive DVD from Toshiba in my computer for generic commands; Play/Pause, Stop, etc to jump to chapter. These keys do not work anymore, I looked at my device manager, and the only thing I can think of that would have to do with these keys is the Microsoft eHome Remote control device keys on the keyboard. I looked at its properties and it says that this device is working properly. Already, I went into msconfig and reset booting the normal start, restarted and nothing has changed. Help please

  Hi kozarman1,

  You should maybe download the latest drivers for the keyboard and check if it works.

  You can view the following link to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information about ehome keyboard, you can consult the following link:

  http://msdn.Microsoft.com/en-us/library/aa940427%28WinEmbedded.5%29.aspx

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman