Checking the connection failed for the source of data on port 1433

Similar Questions

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• Connection failed for an unknown reason (IOM Java Client)

  Hello

  
  

  I have some code Client Java IOM that works if I have access to IOM without SSL.

  
  

  The problem occurs when I try another (production) server that uses the SSL protocol

  
  

  I use these libraries

  
  

  common - logging.jar

  cryptoj.jar

  EclipseLink.jar

  JRF - api .jar

  oimclient.jar

  Spring.jar

  WebServiceClient + SSL.jar

  wlfullclient.jar

  I also tried to add the system properties to add SSL debug, to ignore invalid host names, etc..

  I also created a file of keys, certificates imported and added

  		System.setProperty ("javax.net.ssl.trustStore", KEYSTORE);
  		System.setProperty ("javax.net.ssl.trustStorePassword", KEYSTORE_PASSWORD);

  		opening of session
  		System.setProperty ("java.security.auth.login.config", AUTHWL_CONF_PATH);
  		System.setProperty ("APPSERVER_TYPE", "wls");
  		String ctxFactory = "weblogic.jndi.WLInitialContextFactory";
  		< String, String > Hashtable env = new Hashtable < String, String > ();
  		env.put (OIMClient.JAVA_NAMING_FACTORY_INITIAL, ctxFactory);
  		env.put (OIMClient.JAVA_NAMING_PROVIDER_URL, OIM_JAVA_API_URL);
  		OIMClient client = new OIMClient (env);
  		customer. Login (OIM_ADMIN, OIM_ADMIN_PASSWORD.toCharArray ());

  URL of the IOM is referenced by intellectual property

  The error message is not really help a lot. The green text was added by me.

  User name and password have been double-checked, they work for the web INTERFACE.

  
  

  javax.security.auth.login.LoginException : weblogic.socket.UnrecoverableConnectException : [connection failed for an unknown reason: < bytes garbage here >]

  to weblogic.security.auth.login.UsernamePasswordLoginModule.login (UsernamePasswordLoginModule.java:194)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Method Native( )

  at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke (Method.java:606)

  to javax.security.auth.login.LoginContext.invoke (LoginContext.java:762)

  to javax.security.auth.login.LoginContext.access$ 000 (LoginContext.java:203)

  to javax.security.auth.login.LoginContext$ 4.run (LoginContext.java:690)

  to javax.security.auth.login.LoginContext$ 4.run (LoginContext.java:688)

  at java.security.AccessController.doPrivileged (Method Native( )

  to javax.security.auth.login.LoginContext.invokePriv (LoginContext.java:687)

  to javax.security.auth.login.LoginContext.login (LoginContext.java:595)

  to Thor.API.Security.LoginHandler.weblogicLoginHandler.login (weblogicLoginHandler.java:61)

  to oracle.iam.platform.OIMClient.login (OIMClient.java:212)

  to oracle.iam.platform.OIMClient.login (OIMClient.java:196)

  You cannot refer to the URL of the IOM by IP and use SSL. The host name must match the name on the certificate that will never happen if it is an IP address.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• I'm not able to use the export to ftp in Muse. When I enter my host, the name and the password, I get a long interlude of the Rainbow wheel, and finally, the message that my host ftp can not be found. I checked the name and it is port 21. Can I export a H

  I'm not able to use the export to ftp in Muse. When I enter my host, the name and the password, I get a long interlude of the Rainbow wheel, and finally, the message that my host ftp can not be found. I checked the name and it is port 21. I can export to HTML and use another ftp client to download (on the same server), but it's tedious and minor changes is painful. Have you come across this and found a solution?

  Yes I have - thanks for thinking.

  Starting to think that it is a computer / connection problem. I had to move the machines to connect to the Adobe forum.   Plu MacBook thin. New macbook dead ends. These seem too coincidental independent.

  Susan

• What is the source of data 11.1.2?

  Hello
  
  What is the source of data 11.1.2? without the help of ODBC drivers how to connect to the back-end database. I need the flow for that.
  
  
  Thank you
  PC

  Hello

  I answered a similar question here > what is the data source 9.3.1? Is OLEDB supports ODBC
  If you didn't even answer or bother to mark it.

  Data source connections are driven by JDBC to communicate with the repository database and a JAVA API to communicate with essbase.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What is the source of data 9.3.1? Is OLEDB supports ODBC

  Please someone make me know
  What is the source of data hyperion 9.3.1
  and is OLE DB takes ODBC support
  In hyperion 11 the data source is through ODBC.
  
  
  
  Thank you

  Hello

  The data source in 9.3 / 11 is stored in the tables of planning system database
  In 9.3 it is implemented through the configuration utility, in 11 it's done directly through planning web.

  The data source may contain connection details standards of planning and essbase application.
  The data source connects to the repository planning through JDBC and essbase using a JAVA API.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Check the Source of upgrade installs

  Dear Sir or Madam,

  How can I make sure that the proposals to upgrade and the actual code being installed on my computer comes with Adobe?

  Given that the Updater (s) Adobe don't use browsers, the typical ways of verification of the original URL are not available.  It seems to be without verification that comes from the update or the actual code being loaded on my computer with Adobe.  How can I make sure that the 'upgrade' has not been tampered with, or that the Adobe installer is not used by the pirates or the cyberterrorists to install malicious software on my computer?  I'm sure you guys have must think of a way for your customers check the code being loaded in our machines is really Adobe, but I can't find any way to do it.  The only indication seems to be that pretty logos and other things all corresponding to the appearance of Adobe products, but anyone can capture that kind of things nowadays.

  I can find documentation about it in accession or your online help.  There is no verification of aid.  It's not even a way to check certificates against sites with accession.  At least I can't find one.

  Help, please.  I want to improve my Adobe products, but I can't find any way to check these things bouncing on the bottom of my screen actually have nothing to do with Adobe, or connect in fact an Adobe website to install exclusively Adobe code on my computer.  How can I make sure that someone is not formed is a notice to update and use the Adobe programs to install malicious software on my computer?  Please, I beg you.  Tell me.  Please, I beg you.

  Thank you.

  Sherwin Gooch

  If you're skeptical about whence updates you can get yourself manually a page of the Adobe web site:

  Direct updates
  -----------------

  https://www.Adobe.com/downloads/updates/

• connect to the source of data in OWB

  Hello
  I don't want to connect to a database as a source of data in OWB 11g,
  I use a user name and password to connect to the DB, the user has no objects but I can see other patterns and their objects via tools like developer sql with this user.
  How to connect to a specific schema in my DB, and import the data source with this user/pass via OWB?
  
  concerning
  Judite

  Hi judite

  The definition of location in OWB has a user name and password that is used for authentication and a schema that is used to reference objects of. You can use X as the user authentication schema and the schema Y for the reference schema, then objects of there will be imported.

  See you soon
  David

• Secure connection failed for Nginx + Comodo PossitiveSSL while SSLlabs Score is A +.

  I own the Web site https://vzinity.com that runs on Nginx and uses a Comodo PossitiveSSL cert.

  I tested the installation of SSL to https://www.ssllabs.com/ssltest/analyze.html?d=vzinity.com and it gets a grade of A +.

  I tried opening the site with many browsers, but I don't see this problem in Firefox. When I visit the website using Firefox 39 (Windows 7, Windows 8.1, 10 Windows and Linux Mint) I get the following error:

  The secure connection failed

  The connection to vzinity.com while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Any help will be appreciated.

  Thank you.

  That looks like a problem with bad sniffing user agent.

  It works for me if I change date 20100101 in Gecko/20100101 in on user agent (same Gecko/20100102 works, only Gecko/20100101 does not work).

  • Mozilla/5.0 (X 11; Linux i686; RV:39.0) Gecko/Firefox/39.0 39.0

  The server could be hacked to target only a Firefox user agent.
  You can contact the Web site and ask them to look into this.

• connection failed for esis

  Hello, I am triing to connect you to esis for my school for girls, it's a way for me to check his notes and all missing assignments. It should also access so she can check her grades and assignments. I turned off my blockers and cookies. Still no luck. I get connection failed. I can connect to other places simply not my house, by phone or cushion of Galaxy.  Can anyone help?

  Good first what browser you are using, for example, Internet Explorer, Google Chrome. ?

• How to change the source of data in application with the deployment plan

  Hello

  JDev Version: 12.1.3

  I can't change the source data with the deployment plan bc4j.

  Any example on this requirement?

  Thank you

  Anil

  Well, if you take a look at:

  http://Biemond.blogspot.com/2009/04/using-WebLogic-deployment-plan-to.html

  (one of the links in the link you get), you will see Edvin Biemond answwer:

  "you must change the configuration of module of the Application so that it uses a data source. and in the deployment of applications disable deployment of jdbc connection.

  Now you is enough to make the good source of data on each wls and deploy ears. »

  The simplest (and probably the best) way is, as I told you, and you are also mentioned: open up JDeveloper and change declaratively and re-download the ears

• Problem with negative filters of refinement and the source of data on the OID 2.3

  Hello
  
  I have a problem using the filters of negative refinement on a data source with Information discovered 2.3
  
  Here is the configuration of data source
  
  {
  "baseFunctions":]
  {
  "attributeKey": "COMPANY"
  "attributeValue": "PROMO."
  'class': 'com.endeca.portal.data.functions.NegativeRefinementFilter '.
  },
  {
  'class': 'com.endeca.portal.data.functions.RecordFilter ',.
  'recordFilter': 'OR (OID_RECORD_TYPE:RES, OID_RECORD_TYPE:DEF).
  }
  ],
  "datastoreName": "datastorename",
  'name': 'ABC ',.
  "port": "7770."
  "Server": "XYZ".
  }
  
  When I reached a dashboard page where all the portlets using this data source, the record filter is applied as expected. However, for negative refinement filter, so that it appears in the portlet of the breadcrumb, it has no effect on the data set. Guided navigation always displays the value as a dimension as possible and I can see in my table of results as the data was not deleted by the negative refinement filter. I tried to restart Tomcat, without effect.
  If I go to the guided navigation and define negatively this value on the dimension of the COMPANY, the data gets filtered and I get 2 negative improvements will appear in the navigation bar to the same value (!)
  
  Is there something escapes me to configure negative refining filter?
  
  Thank you

  Your configuration is correct.

  I see two possible problems, but we are really just shooting in the dark:

  (1) "rogue whitespace.
  -If your value is not actually "PROMO" "PROMO", then your filter would not exclude anything. This would also explain why you might then add a negative refinement for the "real value". To validate this, use a browser with some debugging functions (i.e., Chrome), have your applied by default negative refinement and then "apply manually" in Studio.

  And then open the browser debug mode (chrome, right click on the value you just added and click 'Inspect element'). If all goes well, the HTML code will show a little differently, and you can see the white space in the manually added refinement.

  (2) it would happen to be a managed attribute? I think that the managed attribute values can have display names and real names and real name should be used for filtering purposes. I doubt that's the problem, but it's the only other thing I could think of...

  Kind regards

  Patrick Rafferty
  Branchbird

• Problem with comma in the source of data merge document

  I use InDesign CS6 on a Mac in the Mavericks.

  I created a data source document in Word, saved as a .txt file.  It is a unique field which is the titles of documents. One of the documents has two commas in the title. When I do the merging of data, this page displays only the part of the title until the first comma, and then the merger's going to the next page.

  InDesign aid supposed to include the punctuated title between quotation marks. I tried enclosing the entire title in quotes, and I tried enclosing just commas in quotes. I used quotes and quotes. The result is always the same, the title merges up to the first comma and then going to the next page.

  Usually, Google is my friend, but I could not find all the answers either.  What I am doing wrong?

  When you perform a data merge, it uses a character as the delimiter between fields. The default value is a comma. If you have just a single column of data, with no field to separate, then you can check the Options to Import Show key when selecting your data source and set the delimiter to be something thing-anything! -other than a comma. This will force InDesign to ignore commas in your data.

• Determine the Sources of data used by Applications

  We are still currently using MX6.1. Our team of Oracle is upgrading to a large amount of databases (at the beginning of DEV, then QA, then Prod) which connect our various applications see I'm pulling my hair out I am trying to figure out/map which applications use a particular data source. I know that when I go into a sandbox given via the web administration I see sources of data that an application is allowed to use. It would be terribly helpful if I could just go in the variety, defined data sources and see what sandbox (es) currently allow connectivity and would thus know which applications would be affected. Someone can shed some light on my dismal existence? Thanks in advance.

  Your method is easy.

  All the your DSN are saved in the file "cfroot\lib\neo-datasource.xml". You can open with an XML editor and view the settings.