checking the system status TuneUp has stopped working - how it stop?

the window comes up every few seconds acombien he stop?

Hi m dickens E,.

Have you done a recent software or hardware changes to the system?

You can try to perform a clean boot and check.

A clean boot to check if startup item or services to third-party application is causing this issue.

You can read the following article to put the computer in a clean boot:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

Tags: Windows

Similar Questions

  • M40X 129 reboot system, if he has to work hard

    Hello!

    My M40x 129 worked fine for almost 3 months now, but a few days ago he began to restart the system, if it has to work hard. Often, just after the end of the loading of windows. I see a half second a blue screen and restarts Windows.

    My Win XP Prof is as clean as possible with Bitdefender AntiVirus, Kaspersky Anti Hacker firewall and Spybot... I do not think that the problem is caused by a virus etc.

    It would be great if anyone had any idea how I might solve this problem. Thank you very much in advance ;)

    Philipp

    Hi Philip,

    Make sure that your laptop is sufficient cooling and that the air intakes are not blocked, the laptop on a soft surface permanent or dust after being aspirated in the fan grille.

    Overheating is a common cause of sudden-offs power

    HTH

  • When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working.

    When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working. I tried several times to load the games following the indications for help but the games is not accessible. My computer is a remanufactured unit that was on the lease are there steps I can take to solve problems?  Thank you

    Original title: frustrated in New York

    The problem seems to be the igdumd64.dll:

    Fault Module name: igdumd64.dll
    Fault Module Version: 8.15.10.1749
    Timestamp of Module error: 4a5bdf54

    The igdumd64.dll is a component of the Intel graphics driver and seems to be an older version then try to update the graphic driver Intel.

    You could try the manufacturer of the computer for an updated driver, or use the following utility for intel to check a generic version:

    http://www.Intel.com/p/en_US/support/detect

  • Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

    Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

    I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

    We will cover all the possibilities.

    1. download each of the tools for deletion below, save it to your desktop:

    Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

    IMPORTANT! => Activate the Windows Firewall immediately after the restart.

    IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

    4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    5. Repeat step #4 for another removal tool.

    Tips:

    -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

    -Online start the problem in Mode safe computer, if necessary, proceed as above.

    -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

    Why you don't need your anti-virus to scan your email
         http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

    -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

    "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

    First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

    Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

    Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

    Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

    No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

  • I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

    I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

    Hello

    always check the compatibility of vista programs on the link below

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

    It is not compatible with vista, you can try running it in a previous operating system mode

    This does not work for all programs

    read the information below

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    ____________________________________________________________

    and read this information MS, too

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

  • Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

    Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

    Hi Andy,.

    I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

    Kevin

  • F2180 errors at startup as follows - hpqst08.exe and HP CUE status root has stopped working

    I have a HP Deskjet F2180 all-in-One Printer Scanner Copier and is connected to a 32 bit Windows Vista computer.

    My F2180 now allows two error messages at startup as follows:-"hpqst08.exe" and then "HP CUE status root has stopped working."

    hpqst08.exe error reads "the application is not properly initialize (0xc0150004).» Click OK to close the application. »

    HP CUE status root has stopped working reads 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

    I've uninstalled and reinstalled the software, but the error still occurs.  Seems to have happened after an update of Windows Vista (this machine is rarely connected to the Net).

    Any ideas to fix it please?

    Click Start
    In the search window, type services.msc
    Click on the above result that says services (you may need to right click and choose Run as administrator to open)
    Look for the HP Cue (or similar)
    Make sure it is started and in auto mode (automatic not delayed or manual)

    If it is not automatic, set it to that, and then restart the computer.

    If this does not work

    Click Start
    Type msconfig in the search window
    Click on the above result
    Go to the Startup tab
    Uncheck hpqtray08 and hpqst08.exe if it is in the list
    Click on apply, then OK and perform a restart

  • By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

    Bootstrapper.exe has stopped working!

    Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

    I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

    All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

    Thanking you in advance,

    stillcrazyat49

    Hello

    1. have you made changes to the computer recently?
    2. the program is already running while update you?
    3. where did you download this update?
     
     
    Method 1.
    I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
    May be a third party application is causing the conflict.

    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

    Method 2.
    If the problem persists, it is recommended to contact Garmin support and check.
    http://www.Garmin.com/Garmin/CMS/site/us/support/
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

    I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

    Hello

    ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

    ·         What is the brand and model of the printer?

    You can follow the method below and check if it helps.

    Method 1:

    I would say as you put your computer in a clean boot state and check if it works.

    How to troubleshoot a problem by performing a clean boot in Windows

    http://support.Microsoft.com/kb/929135

    Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

    Method 2:

    I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

    http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

    Hope this helps,

  • After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

    After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

    After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

    Hey dododododo5

    you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below

    Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center

    If necessary, read the action recommended in the link below microsoft

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Rosetta%20stone%20Program

    If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    Walter, the time zone traveller

  • Replacement for the preview handler host has stopped working

    When creating a shortcut which connect to the network share. It can connect to get the file and it will have the following error message:

    Replacement for the preview handler host has stopped working

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: prevhost.exe
    Application version: 6.1.7600.16385
    Application timestamp: 4a5bc5ca
    Fault Module name: hooknt.dll
    Fault Module Version: 1.52.0.0
    Timestamp of Module error: 49a 20833
    Exception code: c0000005
    Exception offset: 0000b 951
    OS version: 6.1.7600.2.0.0.256.48
    Locale ID: 3081
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    Does anyone know how to avoid it?

    Hi Ivan 2008,

    You can try the network drive mapping & check if it helps.

    Create a shortcut to (map) a network drive

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get the message "app Incredimail has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution.

    When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client.  I have gmail for my email.  You are able to help with this problem?  Thank you, June Fleischmann - my email address is * address email is removed from the privacy *

    I suggest to see if there are updates or new versions available for IncrediMail.

    If still no luck, I suggest to ask the support of IncrediMail

    I hope this helps.

    See you soon,.

    J

  • I have a message on the screen indicating the dell support center has stopped working how can I solve this problem

    I have a message on the screen indicating the dell support center has stopped working how can I solve this problem

    Hello

    as you have problems with the Dell software, contact Dell

    http://support.Dell.com/

    Dell support at the link above.

    http://en.community.Dell.com/support-forums/default.aspx

    or ask in the Forums of Dell Support

  • I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2

    I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2

    Hello

    Contact HP support because it is their software problem

    http://welcome.HP.com/country/us/en/contact_us.html

    or ask in the Forums of HP Support

    http://h30434.www3.HP.com/

Maybe you are looking for