Chips of the INI

Similar Questions

• using the .ini file created by EXE

  First of all I would like to say that I have a thorough knowledge of the .ini files and the need for them.  My question is related specifically to the .ini file that is created with the executable.  I searched the forum but have not found any instance of my question specifically.  After installation, the .exe and .ini are placed in my working directory in Program Files, which I expected.  The .ini file that is created is attached.

  Now, I would like to point to a different .ini that stores control settings.  I did it in the App generator under Advanced > Use Custom Config File.  That's fine and dandy, but the network, web, settings etc that have been created in the original .ini does not get included in my new .ini.  If my option is to use an .ini file separated with my control as well as created by the .exe parameters.  This seems redundant.

  My question is: does nothing my executable with the .ini file that is created when it starts to run?  I'd be OK NOT to have attached items if I wanted to point to a custom .ini file?  Why create an .ini with these specific settings file if the .exe does nothing with them?

  The only article I found is this one

  http://digital.NI.com/public.nsf/allkb/5467F7D7895835C186256FAF00600A21?OpenDocument

  but it does not explain what the .exe is done with it, if anything.  I guess you have a total control over the .ini and there is nothing "automatic / backstage" going on here.

  Thanks in advance for your help.

  Why remind you the application builder to a custom INI file if you are going to have to read the chips inside manually anyway?  The reason to use a custom within the app Builder INI file is so that you can include specific parameters of execution (VI, access list server, port etc.) which are different from the settings using the LabVIEW development environment.

  You need not key in the INI file for your run-time application (as evidenced by the fact that if you delete the INI file, your exe will still works, creating a new INI file with default values).  If you leave the defaults, the application adds in the first leg in any case.

  You can store your own data in the same INI file used by the executable file; just put the keys in a different section.  LabVIEW Config File format INI files screws slightly differently (for example adding spaces around the = sign), but I didn't know it causes problems.

• I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

  I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

  Hello

  Main differences are:

  • Up to 12 hours of battery life with Powerbeats3, which use chips to W1 Apple energy-efficient (vs. up to 6 hours of battery life with Powerbeats2).
  • A quick charge of 5 minutes for a typical use of an hour (vs 15 minutes to load).
  • Improved ergonomic design.

  More information:

  http://www.Apple.com/shop/product/MNN02LL/A/powerbeats3-wireless-earphones-shock-Jaune

  http://www.beatsbydre.com/earphones/browse-earphones/wireless-earphones/ML8V2.ht ml

• Why can't I just copy a profile to another system in the directory profiles and modified the ini file

  My main system crashed. I have a copy of the profile. When I move a copy of the profile in the profiles folder and edit the ini file to use the new name, I get a message that there is an instance of thunderbird running and I need to shut it down. I don't see any instance of thunderbird anywhere in the Task Manager. It happens just for me the fact that I am also in firefox may be the cause of the problem to a running instance. I'm under V31.7.0

  I tried to simply move the mail directory in the existing profile. The thing is that I don't see the old messages. I can see all of the subfolders of the Inbox on the left but not messages in the right pain. I can see new messages, but it's all in the Inbox and not filtered to the subfolder.

  I tried to activate the function of multiple profile but that doesn't seem to work.

  MY BAD
  It seems that I had something that was bad in the profile. I got the profile from a backup and now Thunderbird works fine.

  Sorry that I missed the problem earlier.

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• Satellite A30: What kind of chip is the Bios

  Hey all!
  I have an A30 equipped with a BIOS of bricks.

  My Question: It has a jumper for activating BootBlock, or a combination of keys.

  My screen stays black and common combinations do not work.
  Another Question: what kind of chip is the bios of my laptop?

  Thanks for the replies!

  HEEE? What kind of chip is the Bios?

  This question confuses me a bit!

  The BIOS is stored on the ROM module and as I remember the A30 series supports Phoenix BIOS.

• I want to register my phone with a chip from the Bahamas to make calls to the

  I want to register my phone with a chip from the Bahamas to make calls to the United States, but it is not an option. Is there a work around for another option? I have unlimited international calls

  Unfortunately, the SkypeToGo program is not available in the Bahamas.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Re: Satellite A300-15 has recovery question: couldn't get a writing of the language of the ini

  I am of the Greece.

  I'm going to start the recovery cd, and it returns the following error:
  + Not able to get a writing of the language of the ini file.
  http://free4U.gr/pics/view-152_DSC01468.jpg

  What to do. ?

  Hello

  Have you tried to repeat the recovery procedure?
  Have you used the recovery disk Toshiba or did you start from HARD drive recovery?

  Check the two procedures;
  First try the recovery of HARD drive; Press F8, and then choose fix my computer and in the new window, follow with HARD drive recovery.

• problem updating the ini file ini file

  I get the ip address of the user's input and to replace the old IP in the .ini to the last ip address file but the problem is when a user enter the IP and I write it in my ini file it does not at once, but if I do it twise in calling the same function of my command button twise then my ini file is updated , it is the strage iniwrite function returnes success although on first attempt. I checked with breakpoint, but when I do it twise, then it is done, please guide me in detail, I am really amayzed by this strange behavior...

  

  I already gave you the exact order of the functions in my previous message!

  Ini file tool generates an object in memory that allows you to store and locate the values. This object can be filled in reading a file on the disk; Similarly, it can be saved to a file on disk. This is the very first operation and the last to perform if you want a picture to date of your values on the disk. There are three layers to consider:

  1. The file on the disk
  
  
  2. The IniText object in memory
  
  
  3. The variables specific to your program

  With this in mind, the right order to update the file on the disk so that it reflects the value that your variables have in memory is:

  Ini_New create the object in memory

  Ini_ReadFromFile fill it with the contents of the disc

  Ini_get('sendmail_from') read of the idebugprogramnode2 memory in your program variables

  Here tou can update the values of program

  Ini_Put update the object of memory with the contents of your variables

  Ini_WriteToFile save everything on the disc

  Memory Ini_Dispose clear

  As you save on disk before you call the Ini_Put functions, the disk image is not updated

• Edit the INI of the executable file with & quot; HideRootWindow & quot;

  Hello

  I am trying to create an executable so that it shows only a single window in the taskbar. On an article knowledge base (http://digital.ni.com/public.nsf/allkb/6E660558F3D420C786256FCB005B4F52) I'd read about the configuration HideRootWindow = True in the INI file. I did it and it worked. However, the problem is that whenever I have reconstitute the exe in LabVIEW, the line disappears, & I have to manually edit the INI file each time. I was wondering if there was anyway I could do this automatically if LabVIEW while it adds this line to the INI file to each build process.

  Appreciate any help. Thank you!

  

  Instead of checking the use of the default Configuration of LabVIEW file, uncheck this option and add your own ini file. Also, be sure that you add to the project ini file too! This will help to maintain.

  I hope this helps.

• Best practices for the .ini file, reading

  Hello LabViewers

  I have a pretty big application that uses a lot of communication material of various devices. I created an executable file, because the software runs on multiple sites. Some settings are currently hardcoded, others I put in a file .ini, such as the focus of the camera. The thought process was that this kind of parameters may vary from one place to another and can be defined by a user in the .ini file.

  I would now like to extend the application of the possibility of using two different versions of the device hardware key (an atomic Force Microscope). I think it makes sense to do so using two versions of the .ini file. I intend to create two different .ini files and a trained user there could still adjust settings, such as the focus of the camera, if necessary. The other settings, it can not touch. I also EMI to force the user to select an .ini to start the executable file using a dialog box file, unlike now where the ini (only) file is automatically read in. If no .ini file is specified, then the application would stop. This use of the .ini file has a meaning?

  My real question now solves on how to manage playback in the sector of .ini file. My estimate is that between 20-30 settings will be stored in the .ini file, I see two possibilities, but I don't know what the best choice or if im missing a third

  (1) (current solution) I created a vi in reading where I write all the .ini values to the global variables of the project. All other read only VI the value of global variables (no other writing) ommit competitive situations

  (2) I have pass the path to the .ini file in the subVIs and read the values in the .ini file if necessary. I can open them read-only.

  What is the best practice? What is more scalable? Advantages/disadvantages?

  Thank you very much

  1. I recommend just using a configuration file.  You have just a key to say what type of device is actually used.  This will make things easier on the user, because they will not have to keep selecting the right file.

  2. I use the globals.  There is no need to constantly open, get values and close a file when it is the same everywhere.  And since it's just a moment read at first, globals are perfect for this.

• Programmatically move EXE file to RT-target and change the INI to start the EXE when restarting. Then the target restart RT.

  I'm trying to:

  1. download the rtexe on the target in real time
  2. download the file or - rt.ini of the RT target on the local disk
  3. change the RTApp.StartupApplication path to POINT to newly downloaded rtexe
  4. download the ini file edited to target RT
  5 reset
  6. the new rtexe should start to run

  When manually deploy the application of RT through the Project Explorer and manually restart the target RT works very well.

  However if I follow the steps above using the attached VI, to restart it does not start the EXE and loses the connection with the RT.

  When I try to reconnect, he said:

  "Errors were detected in the log of the target when connecting to the target:

  LabVIEW: (Hex 0x63B) target the RT has not enough memory to load the startup application. »

  Now why is there enough memory when the EXE is deployed through the Project Explorer, but not enough when the EXE file is moved manually?

  If there is an easier process or to achieve this goal, please suggest.

  Thank you

  Problem solved.  Problem was never in the INI file.

  Apparently using FTP "FTP Store Multiple.vi" used to move the file EXE to the rt to intimidate target must change the file somehow. Instead I just use the FTP "Put several files.vi" and everything works fine.

• Where can I find of the bios chip on the motherboard of my Pavilion a6010e desktop computer and it is soldered?

  Where is the bios chip on the motherboard of my hp pavilion ab010e desktop computer and it is soldered?

  It is welded.

  

• Place the ini file in a specific location when the application generating

  Hello

  I have a little problem.  I have an ini file that I use to store some settings.  Lets call this app.ini file.  When I build the Application.exe, it puts this file in the data directory.  I was hoping that it would be at a higher level and be located in the same directory as Application.exe is (otherwise it will not read the file correctly.)  Looked at the settings of the Source file in the list of categories in the Properties window for the construction and all the 'Identical to the appellant' Destination, but he did not where I wanted.  I would really like this file to a directory higher when I do my build so that my application to read correctly.  Any suggestions?

  I use this executable then when I do my Installer and the problem just spreads here also, not good.

  One way to solve the problem:

  (1) in the build Properties window, select Destinations and create a new destination. Select the same directory where the exe file will be stored as 'Path of Destination'

  (2) assign this destination in the .ini file.

  Let me know if it works

  Marco

• read and sort the values present in the .ini file

  Hi all

  I have an .ini file in which a set of modules with that execution order is mentioned. I want to get all these values sorted in a table, so that I can proceed with the execution of each one in the order given. The list of the module in the .ini file looks like this:

  .

  Here, the numbers represent the order of execution of the module.

  I should get output as a table with the following values:

  1 MNO

  DEF 2

  3 STU

  4 PQR

  5 GHEE

  6 VWZ

  ABC 7

  8 JKL

  I don't know about the configuration data and reading key live but as the list of modules is huge I don't know how to write efficient code for this. Any suggestions are welcome.

  Thank you.

  The excerpt below should be very close to what you want.