CHKDSK on E510 with XP Pro
HI: Computer locked up while the backup of files on an external drive, and I stopped it with a long press on the Start button. When I rebooted the computer, CHKDSK automatically start and said I had a dirty car, (I forgot the exact wording). After that chkdsk is complete, windows started normally. I finished my backup and turns off the computer in the usual way. When I rebooted the computer, CHKDSK automatically restarts and went through the same procedure, saying that the disk is dirty.
The E510 has a special hidden partition that allows you to return to the factory settings. It also came with a second disc (internal) and Norton Ghost 10, which automatically backs up periodically. The two drives are configured as Raid 1, but do not know if the RAID configuration is the result of Ghost 10 or the hidden partition.
I was preparing to return to the original settings when chkdsk is problem and I wonder if I have a failing drive. If Yes, I will install a new drive and reinstall everything, but will not have the hidden partition when I finished (not heavily loss-making). Ghost 10 is currently out of service.
Is it likely that the drive is failing?
Jim
Tags: Dell Drives
Similar Questions
-
Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)? I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro. Can someone advise?
Thank you!
Matt
It was reported a number of not being able to save or to new projects with the title of the Sierra.
I would conclude some time if I were you, especially if everything is working well at the moment.
-
Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor. The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?
What specific mouse?
-
My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?
Sync with iTunes on a Mac or a PC requires:
- Mac OS X v10.8.5 or later
- PC: Windows 7 or later
- iTunes 12.3 or later (free download from www.itunes.com/download)
iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work
-
Layout, simply change line title to the foreground and freezes the screen except for the ability to close the page and return to the page where Page Setup was invoked. This print preview a gray monochrome page with the normal menu features that normally respond except the function of setting of the Page. Print prints a blank page still. Noticed problems with Firefox beta versions 10 and 11 and 12, with XP Pro SP2 x 64. Firefox version 11 has no such problems with Windows 7 ult x 64.
Hello
Please see this.
-
Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? Windows 7.
Can I print posters 2 x 2 or 4 x 4 with Officejet Pro 8500 has? I am running Windows 7.
Hello
The 8500 (A910) driver is not support printing posters.
To work around the problem, you can use another pilot who provide the required functionality:
- Enter the control panel > devices and printers, click Add Printer .
- Click on Add a local printer.
- In use the existing Port, select the port for your printer:
DOT4 if your printer is connected by USB
If standard TCP/IP network connection used.
And then click Next. - Click Windows Update in the list of printers, allow several minutes for what the list will apear again.
- Select HP in the column of manufacturing
- Select the printers HP Deskjet 6980 series column.
- All the steps in the wizard.
Now, you will be able to use the print feature post using the driver 6980, by setting the option Pages per sheet and poster in the finishing tab.
-
I have an imac 27 inch, mid-2010 and I'm trying to use it as screen target with mac pro 2009 and I do the step open two computer connect with cable - hdmi - mini display but has not detected
I have mac with os x yosimete and mac pro have the mavericks
According to the use of your iMac as a display with the target - Apple support display Mode, it requires a 'Mini DisplayPort to Mini DisplayPort' cable.
-
iTunes, sync to Crash with Seven Pro 64-bit
Hello
iTunes Crash with this error message when I try to sync my iPhone 6 on my PC with 7 Pro 64-bit
Problem event name: APPCRASH
Application name: iTunes.exe
Application version: 12.3.2.35
Application timestamp: 56689eb6
The default module name: CoreFoundation.dll
Version of the default module: 1.750.32.0
The default module timestamp: 55dd4433
Exception code: c0000005
Exception offset: 0009f63a
The system version: 6.1.7601.2.1.0.256.1
Locale identifier: 1036
Information extra No. 1: 0a9e
Information extra No. 2: 0a9e372d3b4ad19135b953a78882e789
Information extra No. 3: 0a9e
Information extra No. 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0x040c
If the online privacy statement is not available, connection out of the version:
C:\Windows\system32\fr-FR\erofflps.txt
Can you help me solve this problem?
Thank you
For general advice, see troubleshooting problems with iTunes for Windows updates.
Error sharing a trend similar to that in the third box, so a similar approach should work. Looking for CoreFoundation.dll in:
- C:\Program Files\Fichiers Files\Apple\Apple Application Support or
- C:\Program Files (x 86) \Common Files\Apple\Apple Application Support
Delete if found, then repair Apple Application Support.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review the other boxes and the list of documents to support more far down page in case one of them applies.
Your library must be affected by these measures but there are backup and restore advice elsewhere in the tip of the user.
TT2
-
Would a macbook pro model A1278 case be compatible with macbook pro model A1502 case?
Would a macbook pro model A1278 case be compatible with macbook pro model A1502 case?
# Ports are different.
-
How to set the size of the partition you want on the Satellite C850-12D with W7 Pro?
Hi all
I recently got a new laptop, Satellite Pro C850-12D with seven Pro: disk (500 GB) is first broken down like this:
-a hidden little, 1.46 GB
-the folder C: one, Go 449,47 (visible by the user)
-a hidden, 14.83 GbI would reduce the C: 100 GB partition in order to create a new one for the DATA.
So, I begin the process by using seven disk management tools, but the disposable size after reduction seems limited to a maximum of GB 226,685: C is greater than or equal to 233 570 GB.
I tried defragmenting C but its minimum size is 233 570 GB
Is there a method to overcome this limit and achivce my goal of 100 GB?
Hello
I highly recommend creating a recovery disk before you change partitions on the HARD drive!
The Toshiba recovery media creator helps you create this disk and this are necessary in case something would be wrong with your HARD drive.Back to the question of the partition:
You will need to use a 3rd third party tool like * Gparted * in order to change the size of the partition. -
Maverick incompatible with Officejet Pro 8600 Plus
Maverick update os x 10.9 is incompatible with Officejet Pro 8600 Plus.
1 PDF files from the Web pages are black and show no information when I try to print from any browser. Must take snapshots of Web page and print from that
2 info printer shows that it is still printing when it is finished and will not move forward to the next task
Help, please! I see that there is no HP software update to resolve this issue and am confused why you didn't do your printing software compatible with a huge update of Mac.
Hi podisc,
Thanks for the quick response. It is good to hear that you can print, it's at least a start.
I know that you have not received the error messages in the document, but the behavior you describe leads me to believe that the software did not completely uninstall or install completely with the driver for the Mavericks.
Please follow the steps listed in the document below and let me know how it goes.
An "unsupported Operating System" or "Software is not compatible" message on a Mac running OS X v10.9 Mavericks "
-
The magic mouse 2 works with iPAD PRO
The magic mouse 2 works with iPAD PRO?
No, you cannot use a mouse with an iPad.
-
Problem with vaio pro and bluetooth mouse.
My new Sony Vaio Pro has been disconnected my bluetooth MS sculpt mouse.
I had to re - connect or even re-install the mouse. Painful!
It turns out that bluetooth devices is powered via a USB controller
On the Generic USB controller, under properties, there is a check box selected that allows the computer to "Allow" computer to turn off this device to save power
I unchecked which and now my mouse works fine.
Thanks for that. I couldn't work at all with the Pro my bluetooth mouse. Now maybe I can - if I can only find where I put the mouse...
-
ICS issues with Launcher Pro +?
Since my Razr has been updated to ICS, I struggled with Launcher Pro + working properly. It will force close, ask me if I want to use as default time and again, it will not download wigits, and it will run like quicksand. Sometimes it is fine (30%). More time for that, what I explained above.
Almost ready to go to the use of the home interface.
I did a full cache clear, but it did not help.
I enjoy using LP + but not like that. He was a great pitcher before ICS and it is quite popular.
Someone out there who knows how to solve this, please let me know.
Thank you
Eileen
-
Disable AutoPlay of CD and USB with XP Pro
It is possible to:
Disable AutoPlay of CD and USB with XP Pro
How is it made?
Greetings from Jørn Rudolph to the Denmark
It is possible to:
Disable AutoPlay of CD and USB with XP Pro
How is it made?
Greetings from Jørn Rudolph to the Denmark
Sorry about the quote lol
but here ya go
- Click Start
- Click on run
- Enter GPEDIT. MSC
The mmc group policy will appear. On the left panel: - Double-click Computer Configuration to open the submenu
- Double-click Administrative Templates to open the submenu
- Double-click system to open the submenu
- Double-click autoplay Turn off option that will be near the bottom of the list in the right panel.
The default value is not configured. Set it to "Enabled".
The credit goes to www.windowsnetworking.com
hope I helped :)
Maybe you are looking for
-
Home App has the wrong address for my house
I am creating a location of automation in the Home app on iOS 10. The problem is that this app and only this app, does not show my house to the right place. My contact card has the right address it and maps shows my house to the correct place. Home a
-
Problem with Dell P2715Q and Mac Pro connection
I have a Mac Pro 2013 with AMD 500, 64 GB RAM graphic card. I just bought a pair of monitors Dell P2715 Q 4 K after using my 30 "Apple Cinema Display for many years. Monitors properly function while I actually use and I can manually put the system
-
I have windows vista and when trying to open my emails form direct messger window and continue to receive the above message messnger yahh
-
ProBook 4530 s: grinding noise near the vents when I turn on the laptop.
Sometimes when I turn on the laptop, a loud grinding noise is heard from the left corner, near the vents. I think that's probably the fan. I turn off the laptop because it doesn't seem like grinding stops. Then when I turn it on again, grinding no
-
How to change the background image of the "submit" button
Hi allI want to change the appearance of a submit button: instead of show a button with text 'Add', I want the button submit to be like an icon 'more'I tried to change the background image of the button submit like that, but it doesn't work. What is