CHKDSK runs 5 steps for the system, 3 for the non-system partition partition

Similar Questions

• LaserJet full Scrub steps for no HP computers only

  When you uninstall the HP, not all components printing software is uninstalled.  This can block a resettlement, or prevent a problem solved.  In this case, you will need to do a complete scrub of the software of the printer from the system.  Here are the steps for software Non-HP computers Laserjet scrubbin.  If you use the following steps on a HP computer, you run the risk of deleting important computer components.

  LaserJet full uninstall steps for No HP computers:

  1. Click on the Start Menu.
  2. Click on Control Panel.
  3. Open Add or remove programs.
  4. Delete all HP software.
  5. Click on the Start Menu.
  6. Click devices and printers.
  7. Right click on your printer.
  8. Select remove device.
  9. Select any printer in the folder.
  10. Click on server properties in the upper part of the window.
  11. Click the tab drivers.
  12. Remove all instances of the printer in the list.
  13. Click on the start menu.
  14. Click computer / my computer.
  15. Right-click on the C: drive.
  16. Select Properties.
  17. Click Disk Cleanup.
  18. Once disk cleanup is done scanning, ensure that all options are selected.
  19. Click OK.
  20. Click on delete files if requested.
  21. Restart the computer.
  22. Access to program files.
  23. Remove all HP/Hewlett Packard folders.
  24. For 64-bit computers, access program (x 86)
  25. Remove all HP/Hewlett Packard folders.
  26. Click on the start menu.
  27. Click run.
  28. Type %appdata%\microsoft\windows\sendto in the Run dialog box and click OK.
  29. Remove all HP/Hewlett Packard folders.
  30. Click on the start menu.
  31. Click run.
  32. Programdata % in the Run dialog box and click OK.  Note: This location will there be in Windows Vista and above.
  33. Remove all HP/Hewlett Packard folders.
  34. Click on the start menu.
  35. Click run.
  36. Type regedit in the Run dialog box and click OK.
  37. Remove any HP/Hewlett Packard folders or the registry keys.
  38. Restart the computer.
  39. Follow steps 13-20 to do a disk cleanup.
  40. Download and install the latest version of Adobe flash player

      http://www.Adobe.com/support/flashplayer/downloads.html

  41. Use this tool to clean the system and the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damage or loss of data caused by the utility.  This step is optional.   You can skip if you want.

      http://download.CNET.com/advanced-SystemCare/3000-2086_4-10407614.HTML?part=DL-6271865&Subj=DL&tag=b...

  42. Download the drivers and full software features on the HP Support Site.

      http://WWW8.HP.com/us/en/support-drivers.html

  43. Start the installation.

  I hope this helps.

• Run CHKDSK /F to check for hard drive corruption. STOP: 0x0000007B__Blue screen

  I have a Vista 64 bit OS.  I tried to do a system restore to the last checkpoint to interrupt a Service Pack.  Restore failed (don't remember exact error), now when I try to boot Vista, I get a message saying to run CHKDSK /F to check for hard drive corruption.  STOP: 0X0000007B
  My questions are:
  (1) do I need Vista recovery CD in order to enter the menu advanced at this stage startup options?
  (2) if I decide to upgrade to Windows 7 now, made the stop: 0x0000007B have a problem with that?  or could I fall in Windows 7?
  Vista 64 gave me many problems and I think its time to make him... Thanks in advance... Mark

  Hi Markgod5,

  Thank you for visiting Microsoft Answers.

  It seems that the hard drive is damaged if we get this error message to running chkdsk.

  You can start the computer in safe mode with command prompt and see if you can start.  Then run the chkdsk command.

  To do this follow these steps:

  (a) restart your computer if it is running.

  (b) press F8 after your computer powers initially on.

  (c) once you see the menu Advanced Boot Options, you can stop tapping.

  (d) use the up/down arrow keys to select Safe mode with command prompt.

  (e) in the command prompt window, type the following command and press enter Chkdsk /R and Chkdsk /F

  Using recovery DVDs, you cannot switch mode winRE (Windows Recovery Environment) to run chkdsk. You need DVD full version (Win 7/Vista) or Vista repair disk.

  You probably won't be able to install win 7 because the problem is with the hard drive and chkdsk should be run for the error.

  Hope the helps of information. Please post back and we do know.
  Joel S

• my pc CPU running at 100% for all the programs I opened / what is the problem and how to solve?

  my pc CPU fan runs very strongly & the processor running at 100% for all the programs I opened. DO NOT KNOW IF IT IS A VIRUS IN THE PC WAS WORKING FINE A FEW DAYS AGO. How can I solve this issue?

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  I would also refer the below article which may be useful.

  The CPU utilization reaches 100 percent when you run programs after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/890582

• Error: "cannot open Volume for Direct access" is displayed when Chkdsk runs at startup

  Original title: Edit/Fix key in my registry

  CHKDSK keeps trying to run during startup, but "cannot open volume...". "If I can solve this problem, I want to put it in the manual, not automatic.      My registry key: "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\rchelp is missing.   Can I remedy this by creating a text file with an REG extension and if so, where can I find the exact measurements to do?  It is the DOS Cmd or in Notepad?

  Hi BarneyBear,

  1 did you allow that chkdsk runs successfully at the start of the system?

  Editing registry is not necessary here. We recommend you to check if the disk check is scheduled.

  This problem can be solved by installing the latest service pack Windows XP.
  See the error message "Impossible open Volume for Direct access" When Chkdsk runs at startup

  See also, Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.

  Original title: Program Files gone?

  Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts.  I went into Program Files and discovered the entire file completely empty.  The computer says to run chkdsk b/c the program files are corrupted.  When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk.  When I reboot, the chkdsk never runs.

  My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system.  Can you help me?

  I am running Microsoft XP.

  Sorry to hear that you are having problems with your XP system.  For XP support please visit the link below
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General

  Also, try to start the computer in Mode safe.
  When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.

  Sounds like something important happened (corruption).  If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.

  Good luck

• I'm following Firefox for XP Help on 'Clear cache and cookies.' When I opened Firefox & follow the steps in the help (click on history, tools, etc.), these aren't active links. I'm clicking on a help screen; No actions are performed. ???

  (On the desktop) When I opened Firefox & follow the steps in the help (click on history, tools, etc.), these aren't active links. I'm clicking on a help screen; No actions are performed. Cache and cookies are not deleted.

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing

  To view the history settings and cookies, choose:

  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "always use the navigation mode private.

• Sims3: someone can give me a few steps for the sims3 on a windows vista installation?

  Can someone give me a few steps for the sims3 on a windows vista installation?

  Insert the DVD into the optical drive, wait until automatic execution appears, select Run Setup.

  During the installation you will be asked for your key you will find on the booklet inside the DVD case.  It will also go and get the EA Updater software so make sure that you are connected to the internet during the installation.

• I can't run Chess Titans for Vista professional after you install using the Windows function.

  When I go to chess programs running I get an error message in Chinese, trying to run Chess Titans for Vista Business

  I uninstalled and re installed 3 times.

  I have no other problems with Vista

  Hi Vicees,

  Welcome to the Microsoft Answers site!

  Mahjong Titans and Chess Titans are included in Windows Vista Home Premium and Windows Vista Ultimate as premium games. You may need to upgrade to Windows Ultimate for this game.

  To activate the other games on Vista business, you can follow the steps below.

  Access the link below for more information, who said that the games mentioned above are only available in Windows Vista Home Premium and Ultimate.

  http://www.Microsoft.com/Windows/Windows-Vista/features/Games-Explorer.aspx

  To activate the other games on Vista business, you can follow the steps below.

  1. click on start
  2. click on Control Panel
  3. click on programs of
  4. under programs and features, select features toggle Windows
  5. check the box games
  6. click on OK

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Running two engines step by step at the same time of a port

  Hello

  I have to run two motors at the same time - was used to move a linear ball screw and the other to get a grip. I do voltage and test on small twist wires, but the tension and torsion must be made at the same time. I must also build capacity for each engine to take several steps, IE. have an engine steps number at speed x and then move x number of speed z steps. The two engines must be able to do. However, I have problems to make the engines to run at the same time and to take all measures. The engines are connected to two RMS Technologies R356 controllers. The two controllers are then connected to a RS485 to USB converter card and this card is connected to one of the USB ports on the computer. Currently, I spend an array of orders to two loops each VISA containing read and written. I have attached the vi to watch. All the stuff in the code synchronization is because a new order cannot be sent to the controller until the engine is running the previous command. If orders are sent right after the other, the controller will not execute the first command and then return with an error.

  Does anyone have a suggestion as to what I'm doing wrong?

  Thanks in advance for any help.

  
  

• corrupted system file, error: C\DOCUME ^ ^ 1\All Users Temp is damaged and unreadable chkdsk run

  original title: corrupted system file

  So play downloaded Games PC error appears constantly C\DOCUME ^ ^ 1\All Users Temp is damaged and unreadable chkdsk run. I continually run chkdsk but problem not solved. I am able to play the games but this message is boring and need help to repair

  Hello

  Let us clean the temp folder and check.
  Here's how:
  a. Click Start and type folder in the Run dialog box.
  b. press on enter and delete all the files in the folder.

  Also run Disk Cleanup. Reference:
  Description of the tool in Windows XP disk cleanup
  http://support.Microsoft.com/kb/310312

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CHKDSK runs automatically at startup to the top

  XP Pro SP3

  My computer has been running chkdsk automatically at startup for about two weeks. Not always, but often. Generally, it detects and corrects a problem in Phase 1 and nothing in the Phases 2 or 3. -What this means and what I can do about it?

  No, it's not a reason not to use a floppy drive if you have a floppy drive in your computer. The fact that the computer (or hard drive) is only 2 years old is irrelevant; equipment can fail at any time. And Yes, back up your data first. MS - MVP - Elephant Boy computers - don't panic!

• How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish?

  My problem is? How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish? Example I have Microsoft Security Essentials set allow to run daily on 1200 AM and until he finishes my computer goes to screen saver Mode. and when I click on my mouse, I must sign completely new in my computer > how to stop this from happening, I want to keep my Security Scan open until there finishes?

  All the solutions for this?

  Original title: Windows Vista systems

  Hello

  This can help you:

  "Enable or disable the screen saver.

  http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista

  And this is how do to change the time to wait before the screensaver comes on (article 8) and how to disable the password to logon to him (art. 9):

  http://www.Vistax64.com/tutorials/85539-screen-saver.html

  "How to disable or enable Protection by password on Wake Up in Vista"

  http://www.Vistax64.com/tutorials/102686-password-protection-wakeup.html

  See you soon.

• Unable to determine the type of AC power adapter. Your system will run more slowly and the battery won't charge.

  I get the error message is: AC power adapter type cannot be determined. Your system will run more slowly and the battery won't charge.

  Hello
  (1) when you receive this error message?
  (2) what is the brand and model of your computer?
  (3) did you change on your computer before this problem?
  It seems that the adapter has gone wrong, I suggest you to connect another card and see if the problem still occurs.
  You can also contact the computer manufacturer for assistance on this issue.

• You are not running on a supported operating system. Please see Microsoft Virtual PC help for a list of supported host operating systems.

  You are not running on a supported operating system. Please see Microsoft Virtual PC help for a list of supported host operating systems.

  Crystall ball says you are trying to install a version of Virtual PC on some versions of windows and your PC apparently does not meet the system requirements
  http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx