CHOOSE BETWEEN STANDARD OR ADMINISTRATOR WHEN CONFIGURING THE ACCOUNT TYPE

Similar Questions

• no configuration administrator when configuring the computer

  laptop HP envy using windows8

  I do not set up the administrator when configuring the computer. How can I configure an administrator now?

  By default, the first account created during the setup of the PC is the "Administrator" account  Windows, to the best of my knowledge, will allow not a standard user account must be created before an administrator account.  Press the Windows key + X and select Control Panel.  Select user accounts and verify that it is an admin account or not.  If this is not the case, click on change the type of account and it should give the opportunity.  There must be at least one administrator in Windows 8, so this should be an admin account, provided that it is the only one.

  You receive a prompt in a program he needs administrator privileges?  What made enter you the account isn't an admin account?  Some older programs may not recognize it as an administrator account.

• PeopleTools Upgrade From 8.54 8.53 - change Wizard error when configuring the connection to the base

  Error is displayed: "Test Access ID and password failed."

  Second error: "unable to test the connection.

  I am upgrading from 8.53 to 8.54 and have problems with the "Database Wizard" configuration screen in the wizard to change.  I use SQL Server 2012 for the database, change Wizard is running on the new server of 8.54 applications.  I use the following information when defining the configuration screen:

  Type: Microsoft SQL Server

  DatabaseName: PSHRPROD

  Database server name: PTY2DBAREH002

  User name: {AdminUser}

  AccessID: {DB user who is administrator system right now}

  ConnectID: {valid connect ID which has been vailidated}

  Current homes:

  PS homepage: \\servername\PT_853

  PS App Home: file://servername/PT_853\\servername\PT_853

  PS Cust homepage: \\servername\PT_853

  New homes:

  PS-home: D:\rootPS\PT_854

  PS App Home: D:\rootPS\PS_APP_HOME

  PS Cust home: D:\rootPS\PS_CUST_HOME

  When I clck 'Next', I get errors...

  Error is displayed: "Test Access ID and password failed."

  Second error: "unable to test the connection.

  (1) I have validated that the path contains the path to 64-bit SQL tools.

  (2) the ODBC connection is set up under 64-bit and 'System' - it is also 32 bits of the system and user Setup, but also the 64-bit user.

  (3) I used the SQL Server sqlcmd.exe with access code and was able to connect from this machine and run the SQL commands.

  (4) I'm sure I've done the other stuff but don't remember.

  Please let me know if anyone experienced this or has any ideas.  I'm waiting on Oracle to react to the case after I opened it when their suggestion didn't work.

  Thank you

  Ryan

  I ended up working with Oracle Support, that had me do some things... I also did a thing on my own and with these changes, I am able to connect now.  If it does not please let me know... I tried a few other things that I don't think had no effect.

  (1) removed the Environment Variable "PS_SERVER_CFG" - I found in a document oracle that this could cause problems.  I have not set this manually, but Oracle says it is used to run data mover or SQR scripts outside of the process scheduler.  It must have been added as part of the installation so I'll add it again later.  This change did put a slight change to error messages, so it have some effect, but does not solve everything.

  (2) with the upgrade of 8.53 8.54 I had to add a 32-bit ODBC user DSN.  Even if change assistant 8.54 uses 64-bit, it seems that 8.53 connections are still serving who connects via ODBC 32-bit.

  (3) make sure that the paths configured in the wizard to change are not UNC, if they are matched with a drive and configure using readers.

  Good luck.

• ADF BC: Choose between two identical DB schemas on the application startup

  Hello
  We want to provide users the ability to choose between two identical db schemas.
  Anu idea how?
  

  Cvele wrote:

  -No, my idea is to just drop-down list (selectOneChoice) with available data sources

  Then it would be quite similar to my example, except that in the JSP page you have an input field, but the drop down menu. The underlying values of the different choices in the drop-down list would be different JDBC data source names (or alternately a string that your middle-tier code would then become so JDBC data source names you don't want the JDBC data source names to appear in the 'View Source' in your HTML page) for example).

  -Aaa, I think I understand now, correct me if this evil: in the app, my data controls is currently configured to use an App module even Configuration with data source connection.

  However, at the level application server, at deployment time, I have to define two distinct dataSources and map to point to the my two diagrams separate db, correct?

  Fix.

  And on the login page, I fall to the bottom of the list with two options, one for each db schema. True values for options is a names of data source that is set to the name of the application server.

  Or with a level of abstraction as I mentioned above, if you don't want to "View Source" in your HTML page to contain the JNDI names themselves. The list can contain logical names such as the 'db1' and 'db2' which, inside your classes of dynamic authentication information, you could turn the 'db1' string in some "jdbc/DatasourceNameForDB1" and similarly to turn the 'db2' string in the datasource JNDI name.

• A standard user to log into the account has been deleted. How can I recover it?

  Connect user account deleted

  In an effort to remove a viral program, a standard user file was accidentally deleted. Now my grandson is unable to open a session. Administrator accounts are not affected. Only the standard user account.  How can I get the file back. No, this isn't in the trash

  I don't know if you understand. Miss him not the account, just the file system which allows me to log into it.  Administrators can connect but not standards users - the standard, same new.

  You don't say what happens when a newly created user cannot connect.
  If a newly created user cannot connect even when typing the password (which should be easy to test, for example 123456) then your accounts database is damaged. By using the restoration of the system to a point when new accounts still worked would solve the problem.

• Configure the account for children, but I can't share file with the admin profile

  original title: 2nd user is set up, but nothing works well

  I implemented a 2nd user acct to my children, but the internet does not work well. It is there no parental control over again. I can't share files with the profile administrator (adobe flash player) and I can't download them either. Nothing works directly in the new user account help?

  Hello

  ·         What type of user account that was created (Standard or administrator)?

  ·         Internet works fine on the other (former administrator) account?

  You can go through the links below and check the basics of sharing files and see if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  You can also try to create a new user account and check if the problem persists. To create a new user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot configure the account invited on E3000 v1.0

  I have an E3000 on which I can't access to the guest account.  The router has been installed for months and worked the guest account.  The signal is Excellent, but it does not connect.  The secure account works fine.

  I tried to access the account of comments by running Cisco Connect, I downloaded from Cisco's Web site.  After going through the whole process - it found the router of comments, he ended up telling me that it "does not work" and calling the Cisco support.    I called support of Cisco and they notified me that I could only paid support.  I power cycle the router (with switch for about 10 seconds), but he has not made a difference.

  At this point, I would like to know what are the options, if any, I have this problem (aside from the paid support).   As far as I know, my only option now would be to reset the default router and reconfigure.  I am concerned that I have not the original Cisco connect disks.   Any help would be appreciated.

  You can still use the downloadable Cisco Connect software. Personally, I'll start clean and reset the router and uninstall Cisco Connect software and run the clean installation procedure.

  When you encounter errors, post it here so we have a Visual of your situation.

• CANNOT PROVIDE ADMINISTRATIVE PRIVILEGE TO THE ACCOUNT

  HI GUYS

  I REINSTALLLED MY WINDOWS VISTA HOME PREMIUM WITH THE HELP OF MY RECOVERY DISK. WINDOWS CREATES A DEFAULT ACCOUNT WITH ADMINISTRATIVE PRIVILEGES. BUT WHENVER I DOWNLOAD SOMETHING ON MY PC, I SAID THAT YOU DON'T HAVE ENOUGH PRIVELDGES TO PERFORM THIS ACTION. EVEN WINDOWS IS UNABLE TO DOWNLOAD THE UPDATE, IT CITIES EVEN REASON.

  PLEASE HELP ME ON THIS ISSUE.

  Go to start / Control Panel / user accounts and check that it is said administrator under the account name that you use.  If this is not the case, he is not an administrator account.  See if itwill allow you to click on manage other accounts (but can refuse you because you are not an administrator).  If you can find any account that said administrator under the name.  This is the account that you need to connect to make the necessary changes.

  If you have no other Admniistrator accounts on your system, enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you forgot the password or all the passwords you use usually do not work, try anything as long as it's probably what you (or seller) did during the installation.  Use this account to replace the other administrator account and also to create a second account administrator in case of emergency.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "The type not to force" when they'the same type...?

  Hello

  I have a NI 9213 (thermocouple) module attached to my CompactRIO. I created a VI in the target of my PC and tried to link a digital indicator with an Alias of e/s from one of the channels of thermocouple. However, my 'Run' button became a broken arrow and LabVIEW said: "FrontPanelDataController: Type does not compel." and "the control type does not compel with the variable to which it is linked."

  I'm sure that the source and the receiver are double types! I created a variable node shared the same channel and it could lead to the indicator without a point of constraint.

  Other strangeness observed: in the properties of the indicator data binding page, if I select "Shared Variable engine (OR PSP)" and click "Browse...". ", I can't navigate for all variables in the project. It shows the .lvproj file, but none of the modules or libraries. If I manually type a variable path, I get the error message. If I type in an invalid path, the flag becomes simply unrelated.

  What could be the problem? How to solve this?

  Details

  Controller: NEITHER cRIO-9204

  Chassis: NEITHER cRIO-9116

  Software: NOR-RIO 12.0 - August 2012

  LabVIEW version: 2012

  Thank you!

  Hi JKSH,

  This looks like an expected behavior for me.  The e/s Variable that you use does not look like it is using PSP to pass data.  This is necessary to use that bind to the option data in your project.

  Here's what you selected in the e/s Variable.

  

  Here is the address of variables, notice there is no reference on psp.

  

  Here's how I propose to perform this action.  Do a shared variable published to network, enable anti-aliasing to the Variable of e/s of your choice (in this case TC0).

  

  This is for programmatic access to the network shared variable, that I just created.  Notice how it ends in the PSP.

  

  Finally, we have our variable to be bound.  The only option we have to use would be PSP.

  

  So I guess what I'm trying to say is that, as far as I know, you can't link an indicator to a reference that does not communicate on psp.  Does that answer the question?  I'm on the right track or have I missed at the heart of the issue?

  You mentioned this execution in an earlier draft, however.  Could you describe the installation?

• You cannot change the account Type

  Hello:

  When displaying 'Select your new account type' I see the photo that I have assigned and to the right of the image, I see my log in name and under my name, I see "administrator."

  Standard user is the default bullet selected with the administrator being available option.  However, when I place the ball in the ball of the administrator below "change account Type" becomes gray.

  I won't be a standard user with standard user rights.  It comes to my computer at home and no one else is using the computer or lives with me.  So, my question is the following:

  What I do to activate the Administrator option?  And when I put the ball in the Administrator option I will then be able to "Change account Type".

  This computer and my laptop are both running the same operating system: Windows 7 Professional

  Your support and your help is appreciated.

  Thank you

  Eric

  Hi again:

  I am not connected as a Standard user.  I am logged in as administrator.

  That's what I told you at the beginning: you ARE connected under an administrator account, so you can not change your account type "Administrator".

  If you are unable to perform certain tasks, then this is because of the restrictions of UAC (User Account Control). Click Start, click Help, and then search for help on UAC. You can disable it if you want, at your own risk.

  P.S. Please do not change your past jobs as this would result in a very confusing thread.

• Name of Member validation must contains the five digits in the form of numeric if the account Type selected as ASSET

  Hi team,

  I have a business requirement that I like "validate a HFM member account name must contains the first 3 digits as digital if the user select type of HFM account as ASSET.

  Ex; Member account name: 123_Cash, 125_Loans, 234_Machinery (these members returns true) if these accounts "Type of account selected as active.

  I wrote a rule like below, but it is not validate properly and returns true for all members regardless of either digital or alphabets.

  IF (is equal to (String, varValeurProp (Custom.HFMAccountType), Asset),is equal to (integer, substring (propvalue (Core.Abbrev), 1, 3), 1), True)

  
  

  Please correct this validation rule.

  Thank you is advanced...

  Kind regards

  Laurianne

  Hi Andrew,

  Try this,

  If)

  Equals (String, propvalue (Custom.HFMAccountType), Asset),

  IsNumeric (substring (propvalue (Core.Abbrev), 1, 3), False), True)

• Web interface GS748TS issue when configuring the GAL

  We have several GS748TS need reconfiguration of the LAGS, but neither Chrome nor IE 10 (normal mode and compatibility) appear to allow us to access the configuration of LAG.

  In Google Chrome, loads of everything, except for the interface component user to select ports to add / remove a lag (switching-> GAL-> LAG Membership). The same thing happens for belonging to a VLAN.

  In Internet Explorer 10 to the first page after login does even not load correctly. With compatibility mode turned on, clicking switch-> LAG don't display the summary of the LAGS, but the configuration of VLAN membership works very well.

  Any suggestions as to how we can manage the configuration of LAG? A new firmware would be nice

  Switch the system-> management-> Information System Specs:

  Model: GS748TS
  Hardware Version: 00.00.01
  Starting version: 1.0.1.5
  Software version: V5.2.0.10

  In addition to research and in parallel NetGear Tech Support told me this KB:

  http://KB.NETGEAR.com/app/answers/detail/A_ID/23841

  I wonder how long as a whole has been wasted by how many NetGear customers like us since NetGear first was aware of this problem? And they did not bother to update the docs, or include an Errata / read this first sheet?

  Hell, what attitude.

• Media Center crashes when configuring the TV signal

  I bought a new computer there with Windows 8 (64-bit) a month and set at level to Pro pack for the Media Center. I use a TV HDHomerun tuner that is connected to the network that worked fine on my old machine of Windows 7 and Windows 8 new machine until this week.  I noticed that a show than I had expected did not record.  I found that Media Center did not find a signal.  When I started the process of signal TV Media Center froze.  After several trials, Media Center not continue and set up a TV signal.  I get a popup that says that Media Center has stopped working and closes.  I also received an error in Media Center indicating that Media Center has encountered a serious problem.

  I searched for this resolution and have not found one. I tried a clean boot and received the same error and crash.  I uninstalled Media Center, then reinstalled, which did not work. I also deleted files of database to let Media Center rebuild, which also did not work.  SFC \scannow comes out with no error.
  Can someone help me please?  I feel I lost the $100 for the Media Center of the Pro Pack.  All of this worked smoothly in Windows 7.  That's happened?

  If I can add my two cents to this, even if the thread is a year old, I have two tuners TV, one by HP and DIAMOND.  The DIAMOND is new and has not been tested with Win7, but the HP tuner worked fine with Windows 7, and it worked with Windows 8.1... once.  Now, whenever I try to use Windows Media Center to put in place my TV signal or watching television, the receiver service crashes, restarts and continues to hang until I have leave any action calls this service.

  The Compatibility Center said that the DIAMOND tuner is compatible with Win8.1, but not the HP tuner.  However, the computer is a HP.

  EDIT: Look in the event viewer and all ehRecvr.exe accidents are related to C:/Windows/SYSTEM32/vorbis.acm.  This file is associated with FL Studio.  I renamed the file vorbis.acm.bak and tried again, and made me the error.

• Commit failed when configuring the driver settings

  Hello

  When I try to set up the validation of "capture workspace webcenter console" driver I get the error like "Failed to Connect to imaging system. "Could not connect po"

  basically he asks UserID-weblogic, Imaging Web service URL - Pwd-xxxxx, political base of security http://localhost:XXXXX/Imaging/ws

  When I copy the URL and paste it into the browser, I get a 403 forbidden as output.

  Ref points:

  I checked the imagery in deployments and is active.

  My capture Webcenter is an area (under windows) and IPM is in another (linux)

  Hello Ryan,

  The error has been resolved, it was a stupid mistake, the machine (windows) capture did not file server IPM (OLE) host mapping. By the time I traced it showed me the message 'Connect'

  Thanks for your time again.

  Kind regards.

• Connection: Impossible to let users choose between phone and computer/microphones in the same call.

  I have an account set up with IGP. I checked and double-checked to make sure that I put in place properly, even had a guy at the tip to guide me through just to be completely safe. Yet, I can't get a universal voice to work properly. Under Audio conference settings, I'm not able to select both phones and computer for users to call through. Rather than boxes, it gives me a pair of radial buttons - I can only select one or the other.

  Is there some hidden settings in the back-end that I'm supposed to check?

  Go to Administration > account > more settings and you will see the option to put on using UV with the bridge of phone fully integrated for each provider. This enabled, you should be able to use both at the same time.