Choose the good speedlite Canon 6 d and Nikon D 80

Similar Questions

• Mail doesn't let me choose a signature. 'Choose the signature' is set to 'none' and don't highlight everything I entered.

  Mail doesn't let me choose a signature. 'Choose the signature' is set to 'none' and don't highlight everything I entered.

  In the Mail menu bar, select

  ▹ mail preferences... ▹ Signatures

  The preferences window has now three components. On the left, the signatures are grouped by e-mail account, plus one group all the Signatures in the upper part. Select this group.

  The middle pane now displays the names you gave to all the signatures you set. After selecting one, the right pane shows a preview of the signature.

  In the center pane, select all the signatures that you want to use in a particular account. You can make multiple selections by holding down the SHIFT key or command clicking. Drag and drop the selection on the account name in the left pane.

  If you want a special signature automatically added to all messages sent from an account, select the account, and then select in the menu choose Signature at the bottom of the window.

• Choose the RGB color in Illustrator (swatches and sliders are in CMYK mode)

  I do a simple model of cutting laser. Cutting laser acts as a printer and you choose the power, speed, etc. for each color in the document. I want to just cut, so I only lines red RGB 0.001 pt thickness. Or at least that was the plan. One of the forms in my model has come out a different red (the shades were CMYK despite the document color in RGB mode). I would like to now select all the paths in the document and make them all red RGB. However, when I open the color Panel from the dock the sliders are CMYK, once it comes despite the document color in RGB mode:

  

  How can I change all paths be red RGB?

  How can I stop Illustrator offering me color chart and options of CMYK and RGB offering instead?

  Post edited by: Dumble_dad adding the missing words

  Dumble-dad,

  I changed the RGB Panel, but now it is only to offer me the K cursor!

  If you have checked RGB and grayscale obtained, there must be something wrong, most likely in your preferences.

  Here is a list of things to try when strikes of strangeness (you may have tried / some of them already) and see if that helps you (the following is a general list of things, you can try when the question is not in a file specific; 3) and 4) specifically may be corrupted preferences):

  (1) close Illy and open again.

  (2) restart the computer (you can do that up to 3 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) to move the folder with closed Illy (more tedious but also more thorough and reversible);

  ((5) browse and try the relevant among the other options (point 7) is a list of the usual suspects among other applications which can disturb and confuse Illy);

  Even worse, you can:

  (6) uninstall, run the cleanup tool if you have CS3, CS4, CS5, CS6 and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• The good old Vista 32-bit and 4 GB Ram dilemma.

  Then I started to get a grip on computers... (they interest me: P). back in ' 06, when Vista was first released, I bought a new computer from Dell. Meh, the computer was fine, I never really knew what the specifications mean in reality at the time, but the computer was just. Now, ' 09, I learned to change computers in order to increase its performance and what-not. I started to buy adding RAM... like most people do. I bought 2 x 2 GB RAM for a reasonable price and I was very happy to see the speed boost in my computer. I had a stick of 512 MB RAM on the inside so I just took that one and put in two 2 GB of RAM.

  I turned on the computer, and my boy I see a big difference. The first thing I notice is that I have only 3.5 GB of RAM which is used by my computer. I do a little research and found out that 3.5 GB is the limit for 32-bit operating systems. I was pretty sad. Anyway, I was still happy with what I got. One thing I noticed after installing the RAM was that most of my stuff was buggy to the top. In my dxdiag.exe, BIOS, PROCESSOR and other stuff as it seemed to say n/d I was puzzled and I also noticed that the display of network connectivity (one on bottom right) told me that I was not connected to a service at all. I was scared, but then my internet worked perfectly well.

  After leaving my computer on Defrag, my sound is messed up. Every time I started a program with a kind of ring to it, my sound would stutter like crazy. I have was bothered by this and decided to find out what was wrong. I tried to restart, System Restore and I tried to tinker with the RAM. I still had my original 512 MB of RAM, so I stuck that in and decided if that would fix the sound. I turn on my computer, but the sound is always messed up. I decided to install all available updates, I had and that did the trick. When I turned on my computer, I noticed that my RAM went from 3.5 to 3.0 GB RAM. I was seriously mad and I did everything to get it back to the 3.5 GB of RAM. I went back to my computer and took the 512 MB RAM on it but no luck.

  Someone care to explain this?

  Your BIOS is accessible outside of Windows. Its software on your motherboard. Restart your computer, and find the first screen that appears. It will usually give you a combination of keys to press to enter the "SETUP" or "Setting UP" or "BIOS". Most of the time, it's the DEL and F1 key, but it may vary depending on your system.

  Once you get into the BIOS, go to "configuration/basic information ',"System Overview,"or a page that details what the computer sees hardware wise.»

  If the 4 GB State, restart your computer and the response back.

  I got it, it says I have 4 GB of RAM installed, but it is still only showing me 3.0 GB RAM. I was also noted that the lack of RAM 1 GB in my VRAM I guess. So I guess I'll be stuck with the 3.0 GB, thanks for you help. Oh and how can I fix my sound?

  When I turn on my computer, my sound is all stuttery then when I open a specific program, the sound goes back to normal. And when I turn off this program, my sound will all stuttery again. The program is a game and I really want to solve this problem. No, it is not caused by the speakers, it is caused by the computer itself. Could my map its going to hurt? I only had this computer for 3 years. I'm starting to think that the RAM had something to do with this...

• How to choose the right photo-album

  I want to use pictures for my video. I have four different albums. FCP X shows pictures of the only album (and not the good).

  What should I do to choose the good album (and photos)?

  In Photos-> preferences, click on use as Photo library system.

• LR 5.2 develop preset Lens profile chooses the wrong goal

  The library module metadata shows the lens actually used. Develop module preset chooses the right manufacturer (Canon) but the wrong lens. How the pre-selection to choose glasses actually used for each image when imported?

  Example: Canon EF-s 18-55mm f/3.5-5.6 IS II lens used to take the picture. Canon EF 75-300mm f4-5. 6 USM appllied during import. The imported pictures include those with the 18-55mm, 75-300mm, and the 10-22mm lens.

  Technology Adobe you have preferences file reset LR? A corrupted preference files LR is often the source of problems "unexplained."

  elete-the-lightroom-preferences-file http://members.lightroomqueen.com/index.php/Knowledgebase/article/view/1148/198/how-do-i-d

  You can rename the current file with the extension .old (Lightroom 5 Preferences.agprefs.old), rather than delete it. In this way, you can delete the new preferences file and rename the old file if the issue is not resolved.

• The good camcorder to purchase

  Then... discussion I posted a few weeks ago, I have been diligently read and you are looking to buy a new camcorder.  I currently use a nice Sony handhelds Handycam, but my problem is when I put them in Premiere Elements content, I'm having some problems of quality.  Play the good DVD on their own and the content that comes from a tripod without a lot of movement is correct, but when I move the camera around pan through a scene I get nervous and video effects.  Looks like it's a result of me trying to decompress and recompress the video from the mini dvd VOB files, I'm looking at Mini-DV tape based camcorders. All my research seem to end up with the Canon VIXIA HV40.  It's a bit pricer then I had hoped, but I like the fact that is has 24 p and 30 p modes and what looks like anything decent around performance.  I read some comments suggesting that he is not the best in the dark but.

  Y at - it of you using this platform, and if so could you give me your opinion about it?  Any other ones I should consider seriousley?  I'm hoping to do this update just once or my wife kills me!  I want TO find a camera that does not require me to use the Ribbon (this seems to be a horrible step backwards away from the simplicity of flash or HARD drive memory), but I guess I'm resigned to the fact that if I want to use the first it is not a current device that works well for me unless it's mini-dv.

  Also, if it's important, my computer is a box of double-quad core Intel... new processor, 1 GB graphics card and 8 GB of ram.  I hope that's enough power to manage the creation of HD movies.

  Thanks again for your help... I really enjoy trying to read everything I can and catch up on this.

  
  Thank you.

  Hello

  I went through the same process of tormenting, to decide between AVCHD and HDV. I have a Quadcore Alienware and downloaded some AVCHD as a test, and even is he she handled pretty well, it was very slugish compared to HDV. I then bought a Canon XH - A1, used, B H & for about $2800. The miniDV has been a dream, and PE7 it handles very well. Take a look if you want to

  http://www.YouTube.com/user/444tootsie#p/a/u/0/KD7NdoORd80

  Encoding YouTube messed up some of the timings of the edit with the music, but you have a good idea of the image to 1440 x 1080i quality.

  Good luck

  Stan

• The view connection server connection failure - and that's it.

  Hi all

  I use a box of 10 Windows with Horizon View Client 5.4.1. Our connections are enabled smart cards. When I run the view of the Horizon, I get the login server and hit connect. I am asked to choose a certificate; I choose the right pair, enter my PIN and then get an error message saying "connection to the view connection server failed." And that's the entire message. When I choose the right certificate, get "the connection to the view connection server is not. " No user could not be found for your certificate." That tells me that it's to reach the server, but without more info, I can not find the problem.

  I opened a session with a view to the Horizon with other machines and can I use my chip card with other sites on this computer. There are ports should I open to view Horizon? What else can I try?

  I started poking around outside the view of the Horizon and found the problem, I'll leave it here in case anyone else has this problem. I had to go to Internet Options-> content in-> certificates-> Select Certificate-> advanced and enable authentication of the Client.

• can I choose the photo of the start and end positions to get rid of black borders?

  I tried to use the trial version of first elements 8 before buy you to see if it's able to do what I need to.

  I want to create a dvd photo, which is simple. I would like to use the scale feature to get rid of black borders and choose the start or end point of the photo.  the resolution of the photos are also terrible on screen, and when I import out in an uncompressed avi file. The photos are really high resolution and are very well in other programs.  Some of the photos sparkle even with anti flicker option enabled up to 100%.

  Adobe first elements may be able to make a dvd photo, or should I look at another adobe program?

  As Steve, pre can get you a DVD-video or a BD (for HD projects), but these will be on video and will be limited to the resolution of these two broadcast formats. If this is what you want, then the pre will do just fine.

  Regarding the images, I would NOT use all (or many) on the scale. Instead, I want to resize the images to match the size of the frame of the video project in Photoshop. This ARTICLE will give you some information and some advice.

  Good luck

  Hunt

• an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  an alphabet by typing in a cell gives drop down suggestions from previous hits on the same column. But how the drop down to choose the suggestions of the other columns and other sheets.

  Hi mdsavol,

  Your observations are accurate. The 'suggestions' are previous entries in the same column that correspond to what has been entered so far in the active cell. The only direct user control is to activate the function turn on or off in numbers preferences > general.

  There are other ways to include or exclude items of suggestions:

  • To remove typos in the suggestions list, the user must correct the typos in the cell above the active cell. If they are more in the list, they won't be presented as suggestions.
  • To include selections added to the list, the user must enter these suggestions in the individual cells above the active cell and column where they are wanted as suggestions.

  There was a request here a while there is a list of suggestion 'live' similar to those of some websites, which offers a descending list of possible entries as a type in an input box.

  The only way I see to reach a solution similar to what you have asked is to use as many lines at the top of the non-en-tete of the table section to list the items likely to repeat in your table, and then hide the lines. You'll need a list for each column where you want to use this feature with a list previously planted. Existing items will then require a likely hit up to three, then a click to choose from a list small enough to enter a value into a cell. News he will need to enter in full the first time, but after that it will be put on the list and answer the same thing as the terms preseeded.

  While your setting upward (or decide not to do), consider going on the menu of number (in numbers), choosing to provide feedback from numbers and writing a feature in Apple request. Describe what you want. Explain how he could help the average user numbers, and then hope for the best.

  Kind regards

  Barry

• My macbook pro was factory reset and now it lights up with flashing? And when I go beyond that to choose the network but I can't go beyond that

  My Mac Pro was factory reset now it is coming with flashing? And when if and when I passed it will choose the network and I can't go beyond what I'm doing

  The flashing? the Mac is to tell you that it is unable to produce a valid system for starting.

  Try to make a recovery of the internet start-up as described in OS X: on OS X Recovery - Apple Support

  Looks like your hard drive is dead.

  I hope that you have a backup.

• I submitted a problem (the No. URL window) and in the response email, I clicked on the link that says "no, this does not solve my problem" but when I tried to put the actions that I took (which were unsuccessful) I get error "Must choose the subject line"

  I did the "Restore Default Toolbar" without success. I've updated my Java without success. I uninstalled HP Gizmo web printing which the Add box it says incompatible with Firefox 3.6.6 - and I still have no back arrow or window URL. I guess I'll have to go to the Chrome browser because I refuse to use MS Explorer. I enjoyed Firefox while IT WORKED, but if there is no window to the URL, it is useless.

  This has happened

  Each time Firefox opened

  today

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729;. InfoPath.2; .NET CLR 1.1.4322; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

  The URL/address bar and previous/next buttons are both on the Navigation toolbar; See below.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (~ ~ Red: Linux and OSX see ~ ~: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).
  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars
  How to customize the toolbar

• Cell free game. How can you choose the game # you want and that you do not have a random game pop up?

  On the free cell game.  How can you choose the game number you want and you have a random number of game pop up?

  I'm running XP Pro SP3 and in my FreeCell game I can on the game in the menu bar, and then click to Select the game that pops up a small window with a place to type a number. It also indicates the shortcut as the F3 key.

• Force the Canon C5030 black and white printing

  Hello:

  I'm trying to force my Canon C5030 to print only black and white, even if it is sent color impressions. We don't use a print server, and if I change the default settings on each machine, co-workers can still change for color printing. Is there a way to force it through the printer settings?

  Michael

  Hello

  I don't know what setting on the device could prevent color printing. Maybe something in the service mode.

  I suggest using the PCL6 driver generic Canon and set it to 'Black & White [A3]' in the device settings in the printer properties. In this way, you can provide all the features as options, drawers, etc. and the finish color option is not available.

  But if you don't have a print server, no doubt users will be able to install a driver capable of color themselves on their computer.

• Whenever I try to open or run all I get "Choose the program you want to use to open this file" and by default, Adobe Acrobat

  Whenever I try to open or run all I get - choose the program you want to use to open this file and its default Adobe Acrobat and he always answers this file type is not supported.  I can't open anything on my desktop, tried to reinstall Java, and even in my computer it asks me to choose a program to open it. Help!   I don't know what is happening!

  * original title - try to refresh, to run or install anything whatsoever, and it will not open executable files.*

  Hi LisaPisani,

  (1) did you the latest changes on the computer?

  (2) when was the last time it was working fine?

   

  Method 1

  See the Microsoft article below and try the steps mentioned, check if it helps.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2

  If the previous step fails then I would suggest that you perform the system restore point when it worked very well and check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084