Choose the network protocol for CRIO-9024 to PXI on Ethernet

Similar Questions

• My macbook pro was factory reset and now it lights up with flashing? And when I go beyond that to choose the network but I can't go beyond that

  My Mac Pro was factory reset now it is coming with flashing? And when if and when I passed it will choose the network and I can't go beyond what I'm doing

  The flashing? the Mac is to tell you that it is unable to produce a valid system for starting.

  Try to make a recovery of the internet start-up as described in OS X: on OS X Recovery - Apple Support

  Looks like your hard drive is dead.

  I hope that you have a backup.

• Toshiba Wireless Manager - not possible to choose the authentication protocol

  Hello

  I use for my Toshiba Wireless Manager mobile broadband connections. In a connection profile, it is not possible for me to choose what authentication protocol to use. In the Advanced Settings tab, the authentication section is grayed out. Using the program is mentioned that you can change the authentication settings.

  Concerning

  Post edited by: malo

  Hello

  As far as I know to create a new profile.
  Then you could add the APN, user name, password and authentication protocol
  But my knowledge in most of the cases, the SIM card is detected automatically and no manual work is required. If you do not need to choose the authentication protocol

  Welcome them

• HP pavilion 15-e034tx: how to choose the right RAM for laptop

  How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.

  Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?

  1-4 + 4 GB
  2-4 GB + 8 GB
  3-8 GB + 8 GB

  Thank you

  From the Manual:

  Two customer accessible/upgradable memory module slots

  Support for dual channel DDR3L (1600 MHz)

  Support 8192 MB RAM system in the following configurations:

  8192 MB (8192 MB × 1, × 4096 MB 2)

  Manual download link

  See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:

  4 GB (PC3L, 12800, 1600 MHz) 691740-001

  http://www.Amazon.com/HP-691740-001-4GB-1600MHz-PC3L-12800/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8 & qid = 1451655870 & SR = 8-2 & Keywords = 691740-001

  A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Choose the right PC for PCIe-1430

  It's the difference between PCIe-1430 and the PCIe-1429?

  I already see this article:

  Choose the right PC for the NI PCIe-1429

  http://digital.NI.com/public.nsf/allkb/1FD6E5B5A08C1E0786256F9B0079D449

  specifically, I want to know if anyone can share here the model of PC or configuration it uses with the PCIe-1430 framegrabber.

  I want to know what pc should I have to connect 2 camera link card PCIe-1430.

  Your help is appreciated.

  Dear Moti,

  I used the Dell Dimension 9100 and work Dell Precision 470 with the NI PCIe-1429 and PCIe1430, all two has worked well.

  -Robert Eastlund

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• How to recover or find the network key for a router wireless (Netgear)

  Network wireless adapter NIC Ethernet network device

  How to recover or find the network key for a router wireless (Netgear)

  Hi RaymondKramp,

  ·         What version of Windows is installed on your computer?

  If you have lost the key to network and not connected to the network, then you can reset the router to factory settings wireless.

  If you lost the key network and connected to the network, and then log on to the Web page of the router and get the key.

  For more assistance, you can contact Netgear Support:

  http://support.NETGEAR.com/app/home

  Hope this information helps.

• I would like to be able to choose the colors, as for windows "point selected", active and inactive.

  Original title: Customize Menu

  I would like to be able to choose the colors, as for the "selected" item, the active windows and inactive, the type and size fonts in menus and dialog boxes and the size of the icons and tabs, as was possible in Windows XP.  Is it possible to do this in Windows 7?

  Hi Ciriaco!

  Please, do a right-click on any empty space on your desktop and choose personalize. In the new window in the background, click the blue window, click the blue advanced appearance settings.

  I hope this helps!

  See you soon
  Julia

• BlackBerry smartphones, I can't enter Thai language. How can I upgrade and choose the operating system for my BB9900?

  How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.

  Hi niranaja

  If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:

  1. download and install on your PC a pack OS with any language by carriers

  • (Make sure you download for the same phone model)

  2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software

  Then using software office perform your full backup of your device.

  3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

  4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

  Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup

  Software.

  Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.

  KB13067 : How to get smart BlackBerry phone language packs.

  So please try it and let us know.

  Prince

  _____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• The network infrastructure for a stand-alone server or a Cluster Network Infrastructure?

  Hello

  I want to install a single instance database and I want to use ASM.

  My setup is now just one node but in the future probably it evolve on several nodes.

  So, can I use the Network Infrastructure for a Cluster to a single node, or I have to use a stand-alone server network infrastructure?

  Concerning

  If you later plan ro use more than one server to install the cluster network infrastructure. It is possible to install on a server.

• Win7x64 with adapter DWA-160, "Windows could not automatically bind the IP protocol for the network card stack."

  As the title suggests, I am running Windows 7 family, 64 bit. This is a new installation, a few days ago and I have not installed anything on, or changed the settings.

  I installed a DWA-160 D-link Wireless adapter n with the current drivers, fix (before you ask to confirm, they come from Web site of D - link. I used initially the disk included in the box, however, this has generated the same question that I'll explain, so I uninstalled this software and has continued to use the Windows program to connect to the wireless network.

  I can connect to the network, of course; However, I get the message "Windows could not automatically bind the Protocol IP on the network card stack" when connecting each time.

  After searching for an answer, I tried to turn on the WLAN auto configuration service, however, it is enabled by default. If this isn't any help.

  Tried the netsh winsock / netsh int ip / netsh int ipv4 / netsh int ipv6 reset and restarted after each, no change, if this isn't any help.

  Made sure the problem wasn't with the wireless router, and it isn't because I can connect with my laptop.

  Tried to plug in the USB stick on another computer yet. I don't want to plug into my laptop just to test that possibility. So. Yes.

  I also don't know much about all the inner workings of one of these things, so it would be rad If everything was in one step by step. Thanks in advance.

  Try to run This Fix - It.

• HP 3050 - can't choose the BEST Option for printing

  I just bought this new printer today, I got up this set-up to work via my wireless network, and it's great, a little violin, but at the end of the day it works, but for some reason that I can't print at BEST under properties its all gray of any reason why I can't select all. I did the alignment of cartridges and everything was going good impressions are all straight and what not I print on plain paper 80 gr normally I get 100GSM but it was very expensive store, I went also, the version of the software from the CD I got with the printer is V12.3.1 is this is any help.

  I noticed that I can choose the media and choose the best quality of plain paper, but who has just basically telling the printer that I use a GSM high appreciation paper dosnt it.

  Hello.

  For this model, the driver settings are a little different.

  To set the print quality, select support options unter the paper/quality tab, need you to seklect the type of media and the print quality according to.

  Shlomi

• How to choose the alternative address for email?

  I have in my address book for recipients who have more than one e-mail address. I want to be able to choose the second address. For the moment, I can't work out how to do this automatically.

  Click "address book".
  Select the address book that contains the contacts
  Select the contact
  Info is displayed in the lower list below
  Double-click the alternative e-mail address.
  It is opened in a new write a message to this e-mail address.

• How to choose the account used for the sharing service Google/Gmail?

  I am always connected to three separate Google/Gmail accounts at the same time. Each is used for different projects/types of communications (e.g., personal work, another project). I want to use the service of sharing, but when I click on share it does not give the option to choose which account to use. This makes the sharing service for the most useless. Could you if you please correct this? Thank you!

  I missed this: https://activations.cdn.mozilla.net/e.../gmail.html and, even though I am connected to multiple accounts. I asked the team about this feature. However leave a comment for developers input.mozilla.org is also a great place to request this feature.

  It seemed so nice:
  https://addons.Mozilla.org/en-us/fire.../?src=search

• How to create a Subscriber variable to the network & OnDataUpdate for Variant data type?

  Looking at the example C:\Documents and Settings\All Users\Documents\National Instruments\MStudioVS2008\DotNET\Examples\NetworkVariable\Basic\cs\Subcriber.2008, how can I create a subscriber to the network variable and OnDataUpdate for Variant data types?

  All tracks will be useful. Thank you.

  I solved it by using the correct data type in .NET, for example an sbyte to CVIInt8.