Choose the worker of compilation

I installed a worker to compile on a linux PC remotely as described here.

Worker compiling on the remote PC can connect to the compile on PC (widows running) local development server.

Now, when I make a compilation of the local compilation worker is selected by default.

How can I select the one remote?

My setup is as follows

Development PC: Windows 7, LabVIEW 2010, Xilinx 11.3

Remote PC: Linux (Ubuntu10.10, I know it is not supported by OR), 2012 LabVIEW compiles worker, Xilinx 13.4

Is there a compatibility issue between LabVIEW 2010 and 2012 of LabVIEW? Or between the Xilinx software?

Thank you

LabVIEW 2010 provides only compile for use with Xilinx 10 and 11 toolchains. Therefore, when you make a compilation, the compile server will search for these tools. Since you have only the xilinx tools installed 13.4 remotely, LabVIEW 2010 will not choose this ability to perform compilations.

You must update your LabVIEW 2012 host PC to take advantage of its remote workers compiles with the features of LabVIEW 2012.

Tags: NI Software

Similar Questions

  • Force the worker compilation to work faster

    The process of creating the FPGA bit files takes a long time even with a simple FPGA design.  I followed the system resources, when the worker compile creates the file bit. Only a few percentage of the CPU is being used. Is there a way to force works Woker compile faster because there are available system resources?

    My system is dual Xeon 6 physical cores with 16 GB of RAM, running the version of LabVIEW 2011 90 days come with the single-board Rio evaluation.

    FPGA code compilation is performed not by the compiler to the LabVIEW but a compiler of Xilinx, specific to their FPGA chips.

    The problem you see is the compiler of Xilinx is a single thread and so will not use the base and can also sometimes be seen ' hanging out '. There is nothing you can do to push the compiler to redouble our efforts by encouraging the use of other resources. If you carrots be 3.2 GHz each, then compile on your dual Xeon 6 will be no faster than on a single 3.2 GHz processor.

    What you need to reduce your compile time is the fastest core, you can get!

  • How to choose the scheme of work of a different database instead of the database target

    Hi everyone, can you please answer to my problem.

    Q1.is it is mandatory that the two target schema schema and work must present in a database.if not then How to choose the scheme of work of another data base instead of target database schema. Please suggest.

    __Description__

    My work, my work patterns in odi's in a database schema and target in a different database,
    Now I'm dataserver with identification of the target or credentials of scheme work information.
    Here's the problem.

    I can't see scheme of work in the drop-down list when you create the physical schema with data server with the credentials of the target.

    It's obvious that he cannot show the workschema which presents in an another database.because - database server has the schema of the target database credentials.

    Vice versa

    Please suggest

    Concerning
    Chantal

    Hello

    Your KM will create the tables for working in the schema, you write to and that's why you have the problem:

    create table< %="odiRef.getTable" ("l",="" "int_name",="" "w")="" %="">

    I don't know of an option to replace this 'W' that will say 'go and get work in the staging area, I've specified.

    I guess that you can customize the KM and pass all the commands to Execute on the Source tab, or I guess you could specify the schema for each of the steps to be the logic diagram of the various staging areas.

    BUT I don't know if it would work throughout and I think it will create a massive Mount of work unnecessarily.

    Is there a decent reason why you can not have the staging area on the target?

  • How to choose the alternative address for email?

    I have in my address book for recipients who have more than one e-mail address. I want to be able to choose the second address. For the moment, I can't work out how to do this automatically.

    Click "address book".
    Select the address book that contains the contacts
    Select the contact
    Info is displayed in the lower list below
    Double-click the alternative e-mail address.
    It is opened in a new write a message to this e-mail address.

  • Choose the specific output in GarageBand

    Hi all!

    Any of you know how to use a specific output in GarageBand?

    I try to use the headphones to my card its (Presonus Audiobox 1818VSL, use it as in line class in OSX El Capitan). My card outputs 7 and 8 for the mixture of helmet, presented in GarageBand it's stuck using only the outputs 1-2.

    So basically I only have sound if I plug my headphones in the back of my camera, using 1 or 2, which means having the sound in one ear only.

    I can easily use the outputs 7 and 8 on other software (tried in Digital Performer, works like a charm), but can't seem to make it work in GarageBand.

    Any ideas on how to do it?

    Thank you!

    In GarageBand, you can choose the Audio Interface to use as the output device, but there is no way to get stereo from your project to a specific output channel if the device has several outputs.

    Hope that helps

    Edgar Rothermich - LogicProGEM.com

    (Author of "Graphically improved manuals")

    http://DingDingMusic.com/manuals/

    "I could receive some form of compensation, financial or otherwise, my recommendation or link."

  • Toshiba Wireless Manager - not possible to choose the authentication protocol

    Hello

    I use for my Toshiba Wireless Manager mobile broadband connections. In a connection profile, it is not possible for me to choose what authentication protocol to use. In the Advanced Settings tab, the authentication section is grayed out. Using the program is mentioned that you can change the authentication settings.

    Concerning

    Post edited by: malo

    Hello

    As far as I know to create a new profile.
    Then you could add the APN, user name, password and authentication protocol
    But my knowledge in most of the cases, the SIM card is detected automatically and no manual work is required. If you do not need to choose the authentication protocol

    Welcome them

  • HP pavilion 15-e034tx: how to choose the right RAM for laptop

    How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.

    Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?

    1-4 + 4 GB
    2-4 GB + 8 GB
    3-8 GB + 8 GB

    Thank you

    From the Manual:

    Two customer accessible/upgradable memory module slots

    Support for dual channel DDR3L (1600 MHz)

    Support 8192 MB RAM system in the following configurations:

    8192 MB (8192 MB × 1, × 4096 MB 2)

    Manual download link

    See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:

    4 GB (PC3L, 12800, 1600 MHz) 691740-001

    http://www.Amazon.com/HP-691740-001-4GB-1600MHz-PC3L-12800/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8 & qid = 1451655870 & SR = 8-2 & Keywords = 691740-001

    A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Print CD work is not on C309A Photosmart all-in-one on Mac OS x Lion, but the works of PC.

    HP Photosmart Premioum all-in-one C309A works very well - is wired to the Mac with USB, works PC wirelessl.  Tried to print from Mac CDs and had no drop down menu for the CD option.  Fingered and finally did print from the PC.  Everything, including the 26 April 2012 updates HP for Mac users have reinstalled and could go down drop with CD option - looking, but then print a live project and no longer displayed option.  In fact, he goes out to tell me that the CD print option is not available from the printer, but it works of course easily to PC wireless connection.  I'll keep fiddling with, but someone has experienced this problem and found what is the solution?

    Ok.  I think that we are in business.  I tried the second links you sent.  I make sure to choose the right printer in the list 'Create' and although he expressly told me that "the currently selected printer does not support a direct printing on a CD or DVD", I continue, select a picture or an image, she puts in on paper, but in the form of a CD.  Here, I have to go to the "Page layout" and make sure that I chose the right printer (IE, not the installed fax C309A machine somehow namesake) and I can select CD on the menu drop down and it prints correctly when I send to print.  All the good sport that I guess.   You don't have a lot of different versions to follow and adapt and software updates.  I am pleased to have been able to solve this problem with your help.  Thank you.  If I have other problems, I'll post them on this forum.

  • description interface LabVIEW node will not work when compiling

    Hello

    I have a vi that seeks VISA resources and focuses on their name of the interface to select that you connect to.

    I have a strange problem where, if I run the vi in labview it works fine. When the vi is compiled into an exe file, it does not work.

    I traced the problem to the property node "name of Inst Intf' which gives the description of the interface. In Labview, the node of this property returns the description of the interface, as expected.

    When I compile the vi, this node property returns empty strings.

    The station nearest you, that I could find to this kind of problem is it

    http://forums.NI.com/T5/instrument-control-GPIB-serial/why-visa-property-interface-information-inter...

    However, the exe is running as an administrator, so I don't think it's a problem with permissions.

    Any help would be greatly appreciated.

    I have no idea of what was the cause, but I uninstalled the device drivers for the hardware I used, reinstalled and then restarted the computer and now it works fine.

  • Choose the right PC for PCIe-1430

    It's the difference between PCIe-1430 and the PCIe-1429?

    I already see this article:

    Choose the right PC for the NI PCIe-1429

    http://digital.NI.com/public.nsf/allkb/1FD6E5B5A08C1E0786256F9B0079D449

    specifically, I want to know if anyone can share here the model of PC or configuration it uses with the PCIe-1430 framegrabber.

    I want to know what pc should I have to connect 2 camera link card PCIe-1430.

    Your help is appreciated.

    Dear Moti,

    I used the Dell Dimension 9100 and work Dell Precision 470 with the NI PCIe-1429 and PCIe1430, all two has worked well.

    -Robert Eastlund

  • How to choose the maximum number of items for DMA FIFO to the R series FPGA

    Greetings!

    I'm working on a project with card PCIe-7842R-R series FPGA of NOR. I use to achieve the fast data transfer target-to-host DMA FIFO. And to minimize overhead costs, I would make the size of the FIFO as large as possible. According to the manual, 7842R a 1728 KB (216KO) integrated block of RAM, 108 000 I16 FIFOs items available in theory (1 728 000 / 16). However the FPGA had compilation error when I asked this amount of items. I checked the manual and searched online but could not find the reason. Can someone please explain? And in general, what is the maximum size of the FIFO given the size of the block of RAM?

    Thank you!

    Hey iron_curtain,

    You are right that the movement of large blocks of data can lead to a more efficient use of the bus, but it certainly isn't the most important factor here. Assuming of course that the FIFO on the FPGA is large enough to avoid overflowing, I expect the dominant factor to the size of reading on the host. In general, larger and reads as follows on the host drive to improve throughput, up to the speed of the bus. This is because as FIFO. Read is a relatively expensive operation software, so it is advantageous to fewer calls for the same amount of data.

    Note that your call to the FIFO. Read the largest host buffer should be. Depending on your application, you may be several times larger than the size of reading. You can set the size of the buffer with the FIFO. Configure the node.

    http://zone.NI.com/reference/en-XX/help/371599H-01/lvfpgaconcepts/fpga_dma_how_it_works/ explains the different buffers involved. It is important to note that the DMA engine moves data asynchronously read/write on the host nodes and FPGAs.

    Let me know if you have any questions about all of this.

    Sebastian

  • Choose the good speedlite Canon 6 d and Nikon D 80

    Hello world. Please bear with me, I'm new on this.

    I went nuts online reading on choosing THE right speedlite for my camera (s). And I'm more confued as never before to ask if your advice.

    I have the following bodies:

    Canon 6 d (currently with 24-70 MM lens, you are looking to invest in a zoom super large and super telephoto in the future)

    Nikon D 80 (18-135 mm and 50 mm lens block)

    Using flash for me: I want to use it as a master, claw mounted, is thus also distance away if necessary. You want to use to fill, studio, night photography work.

    My maximum work is with the 6 d. I use the Nikon D 80 but often. Finally, I would like to make the wisest choice, as my budget is between $ 200 and $500.

    (1) I'm caught between the purchase of a Canon speedlite dedicated and buy a flash which is used on the two bodies and my wider lenses.

    (2) I read that the most powerful currently available for Canon speedlite is the 600 EX - RT his broader coverage corresponds to the focal length of 28 mm and upwards.

    Are there any other generic speedlites that don't cost the Earth and have a broader coverage with the same force as the 600 EX - RT?

    (3) OR foregoing, moreover, are a generic model that will as well on the nikon and canon?

    Appreciate your time and advice,

    Samy

    Samy

    Of course, only you can balance your desires/needs against your budget, but it seems that you intend to take the 6 D your battle horse and expect professional results with it, this is where to put your money.  Generic and unique for all made compromises now will be usually exact a price in the form of frustration and disappointment still on the line.  For your intended use and expected results, I would recommend biting teeth and go with the RT 600EX for the 6 d and a low price Nikon (recommended) or generic flash for the D80.  I would advise looking at material of opportunity to save money, but some years ago, I did it with a couple of flashes Nikon SB-26, from two different suppliers, only to discover that the reason why they were on the market was because motorized zoom mechanisms were worn.  At the moment where I've had have been renovated, I was in a bit of money to have bought new.  Since then, I was simply not a fan of the gear used.

    Good luck!

    Kind regards

    Ted

  • Whenever I try to open or run all I get "Choose the program you want to use to open this file" and by default, Adobe Acrobat

    Whenever I try to open or run all I get - choose the program you want to use to open this file and its default Adobe Acrobat and he always answers this file type is not supported.  I can't open anything on my desktop, tried to reinstall Java, and even in my computer it asks me to choose a program to open it. Help!   I don't know what is happening!

    * original title - try to refresh, to run or install anything whatsoever, and it will not open executable files.*

    Hi LisaPisani,

    (1) did you the latest changes on the computer?

    (2) when was the last time it was working fine?

     

    Method 1

    See the Microsoft article below and try the steps mentioned, check if it helps.

    How to change or choose the program that starts when you double-click a file in Windows XP

    http://support.Microsoft.com/kb/307859

    Method 2

    If the previous step fails then I would suggest that you perform the system restore point when it worked very well and check if it helps.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

  • Cannot open .exe programs in XP except MS IE - ask "open with - choose the program you want to use to open this file.

    Any of the My .exe programs such as office, Firefox, Skype can be opened from desktop file icons or programs. Request to the dialog box opens: "open with, choose the program you want to use to open this file" - but only lists MS programs that don't work, or "error - Application not found". Only the program that works is MS IE.

    Looks like your Windows file associations have to dispose. This means that XP is not
    know what to do with the files by looking at the file extension (for example, .exe for executables,
    .doc for MS documents, etc.).

    If you don't have it you, something done for you - most likely malware.

    Go to this site WWW by Doug Knox:

    http://www.dougknox.com/

    On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

    Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

    Run the following scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.

  • Message: "choose the program you want to use to open the file" when tried to open msconfig

    Original title: msconfig does not work

    I ran msconfig and erased everything in selective startup to get rid of some programs; now, anything (including msconfig) open - I just get the window asking you to "choose the program you want to use to open the file.  How can I go back into msconfig access selective start up again?

    Hi willnvail,

    Try these steps and check the result.
    Step 1: Reset changes
    a. visit http://support.microsoft.com/kb/837334
    b. all the steps in the above article for Windows XP and check if the problem persists.

    Step 2: If the problem persists, restore the computer
    see How to restore Windows XP to a previous state .
    b. check if the problem persists.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for