Chrome crashing, plugin (json) using high memory, recently updated Chrome

Similar Questions

• Ubuntu 15.04: firefox crashes, plugin-container using 90% CPU, 11 GB of RAM

  Once in a while (maybe once a week on average), Firefox crashes suddenly, and check the 'top' shows that the plugin-container uses 90% and more of CPU and RAM (I have 12 GB of RAM). So I kill firefox and when I restart, it works normally again.

  For extensions, I only LeechBlock (and changes of Ubuntu). For plugins I have Flash, Java, OpenH264 Video Codec and (apparently) iTunes application detector. Flash and Java are both updated.

  Because the problem somewhat rare occurrence, I was not able to reproduce, or to track down any kind of cause, but I thought he deserved the description anyway; a web search doesn't show anyone else reported the same problem.

  FredMcD not know if the OP was using Firefox on Windows and not on Linux as only your first link is applicable.

  The Flash Player and Java Plugins can be guilty. You must set them to "Ask to activate" so that they will work when you allow.

  I have a strong enough Linux system I find Flash Player setting to "Ask to activate" can still make a big difference as the Flash videos and ads will not play unless so authorized and I (i5 - 4690 k and 16 GB of Ram).

• How to determine which process is using high memory

  Dear team,

  on the single ESXi host we have 192 GB of RAM and on this 5 VMs esxi host who r under tension and a machine virtual is turned off, IF I check ESXi summary and performance tab it show ESXi host uses close to 140 GB of RAM on 192 GB, on the performance tab it show current total current memory usage is 73% and troubleshooting further if I check each VM memory usage then use VM's total memory is not over 50GB then there is show 73% i.e. use of 140 GB, needs your help to check which process is high memory, please find the file attached lot ESXTOP output.

  

  concerning

  Mr. VMware

  The memory consumed, it's affecting the VM (memory affected by the VM, more general memory pages), i.e. "the memory usage. Active memory is usually much lower and calculated by the hypervisor using a mathematical formula.

  André

• Needs of the entries on the heavy use of memory by Oracle

  We receive an alert on a Solaris box given that Oracle uses high memory, stat as below: -.
  < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < <
  NPROC USERNAME SIZE RSS MEMORY TIME CPU
  Oracle 2654G G 2639, 177 42:38:44 100% 19%
  
  
  What can the measures that we must investigate to dig in the current processes of Oracle running on the box?
  
  All entries will be very appreciated.
  
  Published by: 918868 on July 26, 2012 06:38

  918868 wrote:
  We receive an alert on a Solaris box given that Oracle uses high memory, stat as below: -.
  
  NPROC USERNAME SIZE RSS MEMORY TIME CPU
  Oracle 2654G G 2639, 177 42:38:44 100% 19%

  What can the measures that we must investigate to dig in the current processes of Oracle running on the box?

  All entries will be very appreciated.

  Published by: 918868 on July 26, 2012 06:38

  MEMORY is designed to be used.
  This alert itself and it is meaningless.

  a lack of RAM can be seen when (if + so) > (bi + bo) from vmstat below

  bcm@bcm-laptop:~$ vmstat 6 10
  procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
   r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
   3  0   5248  39104 287160 1905160    0    0    47    41   50  241 10  4 84  1
   2  0   5248  36808 287180 1907892    0    0     2    25 1409 3439 18 50 32  1
   2  0   5248  36684 287196 1907900    0    0     0    26 1423 3288 17 50 33  0
   2  0   5248  41992 287212 1907900    0    0     0    24 1495 3463 18 48 34  0
   1  0   5248  42412 287228 1907920    0    0     0    48 1489 3425 20 46 34  0
   1  0   5248  41876 287248 1907924    0    0     1    26 1392 3106 15 48 36  1
   2  0   5248  41892 287264 1907936    0    0     0    19 1408 3287 17 50 33  0
   1  0   5248  41900 287280 1908056    0    0    18    40 1482 3409 16 51 33  0
   2  0   5248  35800 287304 1908120    0    0     7    40 1363 3244 20 49 31  0
   1  0   5248  35848 287328 1908128    0    0     1    30 1447 3293 18 49 33  1
  bcm@bcm-laptop:~$ 
  

• Use of the high memory on Windows 7 without reason...

  Hello, I had recently a few problems with my computer after going on vacation for a week and turn it off.  When I got home my computer has had some problems of high memory use, I have no idea why.  I looked in my processes tab and it shows that Svchost.exe as the highest [150K] usage, but is not a lot to slow down computers.  Nothing else under it attracts a lot of use, I tried to disable my anti-virus [Norton] and it still didn't work.  All my drivers are up to date.

  Data sheet:
  
  
  Dell Inspiron 560 [2009]
  No upgrade graphics card
  64 bit
  Pentium Dual-Core CPU E5700 @ 3.00 GHz 3 .00GHz
  4.00 GB memory installed
  
  

  Hi Daniel,

  Please follow the methods:

  Method 1:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  Scan your computer by using the Microsoft Security Scanner by clicking Download now to check if there is no virus:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:

  Optimize windows 7 for better performance:

  TP://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance HT

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  300-400 MB is not huge.

  How much RAM do you have?
  
  How AVG reports that Firefox uses?

• Use of the high memory in Windows Vista

  I have a PC laptop Vista with 1 GB of RAM (I know I should get more!) that runs very slowly.

  The problem seems to be that the History graph to use physical memory in Task Manager shows continually near maxed out - usually 90% or more.

  No a process indicates an abnormally high consumption (SVCHost is the highest in 40 000 K with "show processes from all users' selected).

  I defragmented and run several scans of antimalware (analyzers Microsoft, Spybot, Malwarebytes, Superantispyware, etc.) and everything is displayed 100% clean.

  I've disabled Aero, transparency, the sidebar and disabled the services as Windows Search, Superfetch, Readyboost, and with little effect.

  I have run MSConfig and booted the system with everything off, and while the memory usage is a little lower, it is still very high.

  It's the analysis of PCPitstop which was done WITHOUT running programs other than Internet Explorer 7: "this system had a total memory load of 82% during the tests. This often indicates that more programs were running that could be managed by the RAM installed. »

  Here are the typical numbers in the Task Manager!

  (MB) physical

  Total 893

  452 cached

  Free 0

  (Mo) of core memory

  Total 240

  Paginated 188

  Paged 52

  System

  Handles 19405

  Threads 821

  Process of 72

  Page 1024M file / 2915M

  Physical memory 94%

  11% CPU utilization

  Here are the specs:

  Internet EXPLORER 7.0 browser

  System operating system Windows Vista Home Premium SP2

  Description of processor AMD Turion 64 X 2 Mobile Technology TL-60

  Number of processors 2

  Processor clock speed 2000 Mhz

  Description of the graph ATI Radeon X 1200 series

  Configuration of the memory 512 + 512; Unknown DIMM synchronous

  I would be very grateful for your suggestions!

  DG

  Darryl Gittins

  Vista is a memory hog. As you noted, you don't have enough RAM and he's never going to run smoothly with only 1 GB. Increase of at least 2 GB. You can also run the free process monitor utility to see what is eating your processor cycles.

  http://www.Microsoft.com/technet/sysinternals/default.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 seems to have unexplained memory use high after a scan of viruses of several hard drives.

  My computer:

  • 6 GB of installed memory, normal use is about 1.5 GB
  • 3 hard disks of the computer (OS [Raid 0]. 2 data readers)
  • Windows 7 64 bit

  Problem:

  • After analysis the entire computer, the use of memory up to 3.5 GB of jumps and stay until the computer is restarted.
  • Research in the Task Manager and resource monitor shows the memory used, but running programs don't add to what be close to 3.5 GB
  • I tested it with AVG and Avira antivirus, and it happens with both. Then he would lead me to believe it's a matter of Windows.

  Troubleshooting:

  • Tried it with several antivirus, same problem with ones I've tried.
  • Scanned just the OS partition without significant increase in memory usage.
  • Scanned two data discs. Memory usage has jumped about 1 GB during the analysis of the first hard drive and another 1 GB when on the second disc. Use of memory are remained high, once the completed scan. Subsequent analyses retains high memory usage.

  Question:

  • What is causing this behavior? Indexing, or is it some sort of memory leak?

  The answer can be found here.

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/50e505cb-00C2-4c86-BF08-e9c926a4982a

• High disk use and high memory usage

  It seems that my friend helped clean up my laptop I will still have a lot of problems. First my laptop becomes the high memory use. What? The system apparently when I look at the Task Manager. Here's what it looks like:

  

  I don't know how to solve this problem. Keep looking it towards the top online and I haven't found anything that helps. I'm not a tech somehow so when you say something like "have you checked your drivers? I will say that I have no idea how to do that.  As you can see the the Service Host: Local System has a lot of memory for some reason use any. And the system takes a lot of space for some strange reason.  He is also windows modules Installer. I can't update my laptop Windows 8 for Windows 8.1

  Another problem is that I can't get my cell trusts. I go on Internet explore and copy and paste the link that appears on the screen in another tab on him and he always says the same thing 'Open in Internet Explorer' and it still doesn't work!

  I should also mention that my friend had to do a system restore to clean all the problems I had before. Who has worked for the most part. Since my laptop was running slower and he's still but a little better.

  Any help would be great.

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• ISE 1.3.0.876 high memory use

  Hi team,

  Kindly help me on our ISE Cisco version 1.3.0.876 that meets the high memory use. It has a HA configuration.

  Primary school has 83% and secondary 63%.

  Thanks in advance!

  Kind regards

  Mady

  Tehreare some fixes in patches that resolve the problems associated with the use of memory

  Last paych 1.3 patch 6 and included the following fix

  CSCux53910: patch 1.3 ISE 5 augmented memory of lead for authentic latency

  I recommend cosnidering install the latest patches

• vRanger connection 7.1.1 and vCenter 5.5 - open filters causing high memory use vpxd?

  Hello

  Displays the first time, hoping you can help me. We are big consumers of vRanger connection in our environment, we use multiple instances to save the production, test, dev, VDI, etc. (6 cases total). Recently, we met our vRanger 7.1.1 connection servers and our vCenter to 5.5 Update 2 b. Since then, every evening when our nightly backups occur to our use of memory for vpxd on our vCenter server (process vpxd.exe) increases, and it remains standing and rising again every night until the that vCenter grave service failed due to memory exhaustion. After 2 weeks of troubleshooting with VMware, their senior engineers think that connection vRanger not close correctly filters, leaving a large number of them that causes the memory out is not in the system.

  Are you aware of any issues like this being reported elsewhere? I tried to find other peoples identify this problem, but it seems that we are the first. Please help, thanks!

  We have not seen this issue in our lab, but we currently 5.5 2d update.  I recommend that you open a support casel

• Why Windows Media Player Encoder auxiliary continue to use more memory, almost crashing my computer, and how to fix it?

  Whenever I use the Windows Media Player on my computer, the Windows Media Player Encoder auxiliary uses memory more and more every second I have Windows Media Player, no matter what I use Media Player to open.
  in any case, she continues to use more memory the computer almost to the point of freezing, trolling, and I do not know how to fix it.
  The reason why I know this has to do with the memory usage is that when I open the Task Manager, it usually gets above the point of using 300 000 k memory usage before I can put an end to the task.
  If someone can help me with this problem, or it can know the solution, please let me know. Thank you

  Hi Xario1,

  ·         Did you do changes on the computer before the show?

  I suggest you ensure that all updates are installed. For more information, see the article mentioned:

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  You can also see the following articles for more information:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

   

  Using memory in your storage device to speed up your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-memory-in-your-storage-device-to-speed-up-your-computer

  I hope this helps.

• On the server with a not too high memory use. DBS

  Hi all
  I see the use of memory to 100% to this server. I reduced the parameters of the SGA to the minimum values and bounced these DBs, but again I don't see no improvements.
  
  What can we do? I'm the only one currently DBA & I have to solve this problem. Other teams are dependent on my the memory usage reduction.
  
  A few details
  ++++++++
  OS: SunOS
  For all instances version: 10.2.0.3
  
  Please come back in case you need more details to help me
  ++++++++
  See you soon,.
  Malika

  So far you didn't post any detail, such as
  -the amount of RAM in the server
  -the amount of memory consumed by Oracle
  -How many cases, the size of their EAG and their PGAs
  - and especially WHY someone at decide between several database on a single server.

  ---------
  Sybrand Bakker
  Senior Oracle DBA

• CC of Photoshop-&gt; performance down, use of memory to the top.

  I've recently switched to Photoshop CC.

  I noticed the performance was slow, memory usage has been huge. At first I thought it would be because I'm a little bit bigger than the previous panoramas processing (e.g. merger of 25 images at 21 Mpx each).

  Then my SSD drive crashed when the sysem ran out of memory, and I can't get it back.

  I reinstalled Mac OSX 10.7.5 on the original HD and re-installed PS now, my bandwidth jumped below 1 GB downloaded per day, at 20 GB, 30 GB, 44 GB downloaded.

  I don't know how this can be traced to CC PS, other than to slow performance and high memory usage, but it ' a coincidence is suspected.

  Tom Legrady

  That would be because the memory usage is the same as previous versions, and we know not all major leaks memory in Photoshop CC (we do a lot of testing to find and eliminate memory leaks in Photoshop).

  And because we have seen third-party drivers and third party plugins with memory leaks.

  If Photoshop is consuming that amount of RAM without opening documents - so you have about 6 GB of presets being loaded at the launch (which is predefined settings that you have added, because by default Photoshop doesn't load that many presets and consumes less than 300 Meg to the launch).

  If you mean Photoshop costume that much after the closing documents - then this is how you allocated to Photoshop and used in your documents.  Photoshop does not free memory in the system until the output is perfectly normal behavior (otherwise it would be much more slowly).

  We can try to help you determine which consumes memory on your system.

  But by emphasizing the fact that Photoshop is the cause, when it is easily verified as not the cause, will not help you.

• OptiPlex 960 - can he use DDR3 memory?

  I recently bought a lease Optiplex Dell 960MT.  It came with 2 GB memory DDR2, I need to increase.  I can get 8 GB of DDR3 for the same price as the 4 GB of DDR2 memory DDR2 prices are much higher than for DDR3 RAM.  According to the service manual Dell Optiplex 96, in 960 Opti chipset is 'Chipset Intel Q45 Express w/ICH10DO' http://www.dell.com/downloads/global/products/optix/en/desktop-optiplex-960-technical-guidebook-en.pdf . According to the specifications of Intel for the 960 Opti chipset, it can use DDR3 memory http://ark.intel.com/products/36527/82Q45-Graphics-and-Memory-Controller-Hub.  So, I found a few retailers who sell a refurbed Opti 960 which, claim, have the DDR3 memory in them http://www.amazon.com/Dell-Professional-Professionally-Refurbished-Refurbisher/dp/B0057GPUXE.  So is the Optiplex 960 able to use DDR3 and, if it is, what specs?

  OracleOfDelphi

  N °

  Fails in a DDR2 DDR3 slot.

  If the two are the exact same length and the number of pins, they have a different architecture.

  Also the "notch" on the cylinder is in a different location, so you can't physically put DDR2 ram in one slot of DDR3, or vice versa.

  Bev.