Chromebook: Printing to the HP Chromebook 8600 office

Similar Questions

• I have problems printing and scanning to an ipad with the officejet pro 8600

  The iPad works on when the HP officejet 8600 scanning and printing to the HP officejet 8600. I have an iPad 2 IOS 5.1.1

  Thank you for the information. It is most probably the cause of your problem. We have noticed with some iOS updates that some features don't work or work differently than before. I think your best option at this stage would be to buy a wireless router low cost of N. sorry for your trouble!

• Office Jet Pro 8600 that printing of the iPad

  I am running Linux Ubuntu 12.04 LTS and have recently have not been able to print from it. My printer is the Office Jet Pro 8600, and on the first week I got it Setup print without problem. Now, I can only print from my iPad and when I try to print from my computer it says that it completed the work.

  Hello frashure11!

  About your problem, I suggest you check if you receive the internet signal or uninstall and reinstall your HP printing software again. The reason of why I tell you to do these is because when you try to print wireless, then you know how much you receive signals. For example, if you do not receive the maximum amount of the signal, then the chances are that printing occurs slowly. Sometimes, you can also try to uninstall the printer software and reinstall it again. But before you do that, re - check that your internet connection is to give a signal properly. I prefer lets you choose a password that has a security code, so that you can receive the maximum signal, somewhat, rather than having several people use it. Thus, your internet will go slowly and your impression will slow down.

  I hope this works!

• HP Office Jet Pro 8600 more. Do not print on the internet

  Hi all

  Today, my printer decided to "throw up" an ontop empty page of the Web page, I tried to print.

  I asked the printer in the right hand mouse button menu drop-down, then 'print '.

  Then the white page appears. You can check the internet on the edges.

  Print my docs and photos.

  Maybe I have changed something in the settings of this morning, but I don't remember what I did?

  Someone at - it ideas? I hope so. Thanks Redocean

  Hi @Redocean

  I might be able to help him, but it's not really something HP is supported. I found a video that asks you to remove Softonic, as well as a link with the following instructions to help you reset Internet Explorer. I think that might help.

• How to print envelopes and labels on an Office Jet Pro 8600 more all-in-one

  Envelopes and labels can be printed using the paper on top of the Office Jet Pro 8600 more printer all-in-one?

  If printing envelopes the lower tray, should I remove the paper from the tray and adjust the margns?

  cor21911,

  You are not able to print labels or envelopes of the ADF, for copying or scanning only. Also, it is not necessary to remove the regular printer paper to print on these types of media, even if it can make it a little easier. All you have to do is go to word or any other type of program allows you to print and select the appropriate model label or envelope and follow the instructions.

  Let me know if you need additional assistance.

• Office Jet 8600 Premium: printing from iPhone to non - Airprint Office Jet

  I'm trying to set up a simple network. I have a router Linksys, Windows 7 computer, HP Office Jet 8600 Premium and a few iPhones.  I want to be able to print from the computer and print wireless from iPhones.

  My first thought was to connect the computer and the printer to the router using Ethernet cables and turn off the radio of the printer.  If I do this, when I connect my iPhone to the network router wireless, will they see the printer and be able to print?

  Or do I need to connect the printer to the wireless router?  If I do this, the computer will still be able to print through the router?

  Thank you.

  Hello

  You can connect the printer to your router with an ethernet cable or wireless.

  As long as the printer and iPhones are connected to the same router, you can print to the printer using AirPrint.

  Kind regards

  Shlomi

• HP OfficeJet Pro 8600 stops printing in the middle of documents

  This has happened recently. Nothing has changed on my end. First of all my ink was low, but even after changing ink it always did. I get an error message in Windows 8 that says: cannot print the Microsoft Word document. There is no error on the computer, but on my screen it says

  HP HPCA89EB (8600 HPOfficeJet) error. Printer couldn't pring Microsoft Word.

  The document is 31 pages and stops on every 5-10 pages on ANY document.

  BTW, my software is updated to date.

  Help! It's so boring!

  Hello eli4,
  Welcome to the HP Forums.
  
  I understand that you are having a printing problem in Microsoft Word with your Officejet 8600. I will do my best to help you with this.
  
  I would say running the print and Scan Doctor.
  * Download and run the utility.
  * Select your printer in the list, press next
  * Select printing fix.
  It will detect and correct problems with printing.
  
  Then, I recommend you update your firmware to the printer. (Get the latest Firmware and product updates).
  After these two restarted the computer, and then test with your word documents.
  
  If your still having the problem, try uninstalling/reinstalling the printer software.
  Also, let me know if you encounter any errors. If you need help, I have to know if the printer
  connected USB or wireless.
  
  Thaks for posting on the HP Forums.

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• Printing envelopes on the Officejet Pro 8600.

  Greetings.

  I'm looking for instructions on printing of envelopes with success on the Officejet Pro 8600.  The printer tries to feed a printer, but stop feeding envelopes because they are pulled in.  Using plain old monarch # 10s.  I realized I have to disable the detection auto-fonction support.  Help.

  Thank you

  Hi BishopB;

  Hope you are doing well and I'm sorry that you are having problems.

  This document shows how to load the envelopes to the printer.

  http://support.HP.com/us-en/document/c02890475

  This article will provide you also with the support of the envelopes by this printers;

  http://support.HP.com/us-en/document/c02858465

  It can be useful;

  RobertoR

• HP OfficeJet Pro 8600 Plus: how and where can I find the year of the printer? HP OfficeJet Pro 8600 more

  How can I get the printer HP OfficeJet Pro 8600 year more?

  I looked in the staus report printer and the different labels I can find on the printer itself. I don't know that I just lack.

  I bought it new, so I have no reason to suspect that the information has been removed before purchase.

  Thank you

  The printer status report has 47 online date (rounded to the week) the print head has been installed.  Except in rare cases where that the printhead has been replaced, this would be the date of the printer has been installed.

• The controls/Officejet Pro Office lost more than 8600

  I lost the ability to contol my printer in my office. Until recently, when I clicked on my HP printer shortcut

  window opens with my controls, including the Device Manager button. Now that the button has disappeared and the only

  the options that remain are: see what's printing - customize your printer and set the preferences. I tried to unplug

  the printer and the desktop. I have also uninstalled and reinstalled the software with no luck. I am running Windows 7.

  Would be grateful for help if someone knows this problem well. Thank you.

  You are welcome.

  Try the Solution below, which should solve the specific problem of the suite:

  http://support.HP.com/us-en/document/c03640384

  Shlomi

• OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

  OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

  Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

• My printer is HP Officejet Pro 8600 Premium, product #CN577A, Windows 7, Office 2007

  The printer is only a little more than 2 months old.  Everything works perfectly except printing envelopes with Office 2007 on Windows 7 64 bit.  I just tried to use it and the first time envelope stuck.  Then I find I need to print with the side flap to the top or the printer is not picking up the envelope even though Office 2007 contains provisions to make or face down.  If the envelope is always printed on the side of Rabat and nothing that change in Office 2007 or on the printer made a bit of difference.  It seems that it should be in warranty, but HP says that it is not even though it is less than 2 months old.

  THANKS A LOT FOR YOUR EFFORT TO HELP!  I was really surprised because I accidentally disconnected from the Chat Session with Wilma.  I'm sorry to say that your link: Hhttp://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=4322914&prodTypeId=18972&objectID=c02890475

  fails and seems to be incorrect in my eyes.  I have a problem of a #10 business envelope printing.  The printer sets the envelope in the center of the ONLY paper tray.  If I followed the exact directions on desktop, Options printing envelopes & labels, it always prints on the side of Rabat.

  By trial and error, I discovered that I can print ignoring directions.  Envelope is placed flap down, with him to the right side, no radio button do check in radio in a clockwise direction, for the flap to the top button is clicked and that the photo shows the configuration which is 3rd from the right office printing mode. It shows that I'm feeding the wrapped on the left side of the paper, with the flap to the top tray, that I can't do with a #10 envelope.  I know I've probably lost go back you there and it is ridiculous to go through such a convoluted process.  Something is obviously wrong with Office, me, the printer, or?.  Otherwise, the printer is perfect!   THANKS AGAIN AND IF YOU HAVE ANY HELP LET ME KNOW. ??  Deno

• The printer Officejet Pro Premium N911n 8600 performs the selection automatic tray?

  I have a printer Officejet Pro N911n, CN577A Pemium 8600 to two trays. My operating system is Win8, 64-bit, there is no error message, no change in System.

  The HP Officejet Pro 8600 e - all-in-One series User Guide indicates that by default, support for prints of printer from the Tray1 Tray1.If is empty, the printer draws media from the bac2 (if it is installed and loaded with media. I have tray lock disabled, Tay1 default tray and automatic selection of the active status bar. Before these selections, I contacted HP email support to report this option did not work. I received a response that there is no method that automatically selects a tray when a drawer is empty. Manual States the user otherwise... This option may not work, but it is part of this series of printers. I have the two charged plates and I will determine if it works after that Tray 1 is empty. Does anyone have one of these printers and auto function set work? Thank you.

  Hello wardell1,

  Please take a look at this document and I would like to know if the troubleshooting steps to help you solve your problem.

  Good luck!

• OfficeJet 8600 super slow printing on the network

  I have a Mac with os x installed Lion couple and uses the model of N911a of OfficeJect 8600 Pro. I have updated drivers recently so as current sound properly.

  Here are a few vitals:

  OS - 10.7.3

  Router: Apple Time Capsule

  He's averaging about 3 to 4 minutes per print page from any computer in the network. I guess that's not normal. How can I trouble shoot? I've seen messages on the definition of a static IP address that I do not know how.

  What suggestions do you guys?

  I suggest to set a static IP address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.