Cisco 1250 and AIR-ANT5959

Similar Questions

• Configuration Cisco AP 2600 (AIR-CAP2602I-E-K9) and Cisco 2500 wireless controller?

  This is the first time that I work with this type of devices (Cisco Ap 2600 (AIR-CAP2602I-E-K9) and wlc 2500)... my experience to the CCNP (router and Switch)

  How configuration Cisco Ap 2600 (AIR-CAP2602I-E-K9) and wlc 2500?

  Please find attachment (Cisco device map)

  

  Hello

  Here are the docs for you to configure the Basic for AP switch port configuration IE 2600 s and wlc.

  WLC port must be configured as a trunk.

  Port of the AP must be access.

  CAP2600 series requires software 7.2.110.0 wlc minimum (make sure you have it or above release)

  Upgrade if you follow it.

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

  1. http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml (SW port configs)

  2. http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

  (Another thing very importand, discovery mechanism, choose properly)

  If you choose the option dhcp 43, it uses the TLV format. Type is always f1, the length is 4 * (wlc number for which you want to provide discovery for, in your case) Value = Hex conversion of the wlc management ip address.

  A video for the process of

  http://www.youtube.com/watch?v=oOh_Iv1CHxQ.

  Thank you

  Sahil

• AIR-WLC4402-25-K9 and AIR-WLC2125-K9

  Hello

  I have 20 ROUND 1131 G to deploy with a wireless controller and I have to choose between the AIR-WLC4402-25-K9 and AIR-WLC2125-K9. I would like to khnow the main differance between this espacially products in terms of performance (throughput).

  Thanks in advance

  Anita Nizar

  Hi Anita,

  Cisco documentation;

  "While Cisco 2100 series wireless LAN controllers supports transactional environments such as handheld scanners in retail wireless, Cisco 4400 series wireless LAN controllers are recommended for applications, high speed and high intensity of multicast such as bulky, videos, push-to-talk data files."

  Series 2100 Cisco Wireless LAN controllers

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps6302/ps8322/ps7206/ps7221/product_data_sheet0900aecd805aaab9.html

  I hope this helps!

  Rob

• Need help with printing wireless and Air of printing

  I have a Xerox printer connected to an Airport Express station and I was able to print wireless from my Mac. I just replaced the Xerox with a Brother printer which has built in WiFi and Air feel, although I can't get anything to work. I entered my password WiFi network directly on the printer. The instructions had me download the drivers that I did and I download a wireless configuration program that asked more than about nothing if I already entered my password of the WiFi network of the printer.

  1. I do not remember how I already had the Xerox facility to print wireless from my Mac. I just plugged a USB cable directly linking the Airport Express to the Brother printer to bypass the built in Brother WiFi and use the Airport Express for internet.

  2. any thoughts on the use of construction vs the Airport Express WiFi?

  3. what should I do do AirPrinting work?

  Thank you.

  Post edited by: southwestform

  I use an Epson printer set up as AirPrint rather than as a brother, but I expect the two similar configurations.

  All I had to do first was installing the printer on my network domestic wi - fi.

  Then in system preferences > printers & Scanners

  Select Add printer

  

  Select the printer and set its AirPrint and add

  

  What printer model is Brother and in fact specifies that it is compatible AirPrint, or just a Wi - Fi connection?

• Is it possible to make the back to Pentecost iPhone 6 and Air iPad

  Is it possible to make the back to Pentecost iPhone 6 and Air iPad

  You cannot back up an iPhone to an iPad or vice versa, but you can save them both to a computer via iTunes or you can backup to iCloud. See: How to back up your device using iCloud or iTunes - Apple Support

  You can also synchronize contacts, photos, etc. between the iPhone and the iPad. See settings > iCloud on each device for things that you can synchronize.

• What is printer Apple App and Air printer is best

  What is best Mac Book Pro App and Air App with a value of $39.99 printer printer.

  you don't need an app (menu) file = > print in any application

• Flash Builder 4.7, Flex 4.9.1 and AIR 3.4 for Playbook?

  Hello

  IM, develop an application using Flash Builder 4.7, Flex 4.9.1 and AIR 3.4 for multiple platforms. My question is when I deploy to Playbook, is mentioned the configuration can cause problems or not?

  What should I do to ensure that my apps running on the playbook and other devices too! using Flash Builder 4.7

  Thank you

  PlayBook (and BB10) currently only supports AIR 3.1.

• Cisco VCS and integration Lync2013

  Hello!

  Could you tell me please, when CISCO officially support Lync2013 - free new software for VCS - C and documentation on integration?

  The main interest is the possibility of transferring video between CISCO/MCU and Lync endpoints on the H.264 Protocol, who hails from Lync2013.

  Right now, I've got VCS - C and RTM Lync2013 X7.2. During the video call without AMGW appeal established as audio only.

  When using with Lync2010, it worked on Protocol H.263 and CIF resolution.

  Evgeniy salvation,

  We are currently investigating the possibilities to achieve interoperability between Lync 2013, VCS and video devices on the side of the VCS standards-based, it is a work in progress and at this stage, it is to early to provide any factual information on when interop will be available.

  In contrast to Lync 2010, Lync 2013 does not support H.263 for video and it so that will remove the OCS/Lync integration. I do however think that you should be able to make a two-way video between Lync 2013 and VCS-joined endpoints if you use an AMGW tried that yet?

  Thank you

  Andreas

• Backdoor in Cisco routers and firewalls.

  The more I read on the NSA scandal (and Yes, I apparently a scandal) less I trust corporations hardware and software.  There is no reason for anyone to doubt that all Cisco equipment comes with a backdoor.  Because these probable backdoors exist it's a matter of time before hackers discover and exploit them.  It's happened to Microsoft a number of times and there is no reason that it could not happen to Cisco.  It is no longer our trust Cisco equipment and have already started researching alternatives network.

  It is more a crazy conspiracy theory, that is the reality.

  In all liklihood, we use a series of firewall to further isolate our network against intrusions.  To reduce costs, we can keep our existing in this topology Cisco equipment, but we will replace hardware Cisco when it breaks down or needs to be upgraded.  I do the same thing with my home network.

  In the last months, we already moved all of our e-mail to secure servers overseas and changed all our McAfee, AVG and Avast antivirus software.  We are also researching Linux distributions to replace Microsoft.

  If Cisco wants to protect their brand, they need to take a stand or see their market share continue to erode.  There must be a CEO to a U.S. company that will take this position and be a hero rather that continue to be a lap dog.

  Hello

  use open-source based linux firewalls and routers.

  and check the source cod

• Cisco show and share to publish on the internet

  Dear Experts

  We have new deployment for Cisco SNS, and we publish SNS on the internet. I need help to do it and any recommendations, please.

  Thank you

  Richard

  Hi Richard

  Solve you your problem? I have to make sure of the following.

  1. you can access external SNS internally.

  2-natting is ok between IP Public & private.

  3. for the DNS record, make sure that the name must be the same on the inside & outside. For example internlly vod.bnp.med.ca and create a record public vod.bnp.med.ca should be the same FQDN, otherwise your SNS will never work. For authentication, you must publish the DMM.

  Note: your question this internal FQDN differs from the external FQDN of the SNS.

  Thank you

  Please note all relevant information

• Cisco ISE and Meraki RADIUS

  I am very new to Cisco ISE and Meraki.  I try to get the Radius configuration for wireless authentication.  When I do a test of the Meraki to ISE, it passes.

  When I try to connect from my laptop, I look at the logs of the Radius and it passes; However, it does not connect me to good policy.  I keep hitting the default policy.  I have my Meraki police above the default policy in the strategy defined in article.  I have attached what looks like my strategy game.

  Devices does not really matter. Here is what I see when I create a device group (where you add the access point to this group), and then create the condition:

  networkdevicegroups.PNG

  

  And here is where I create the condition of strategy game and you should be able to select the Meraki access points:

  devicecondition.PNG

  

  This will give you the condition similar to what I posted above. This is perhaps why you aren't hit that is not matching the condition for this game.

• AAA Cisco 600 and 700

  Cisco ACS GANYMEDE + AAA can be activated for telnet to Cisco 600 and 700 routers?

  Unfortunately you can not configure radius AAA or Ganymede in routers series 600 or 700.

• The traffic load between the power of Cisco ASA and FireSight Management Center fire

  Hi all

  I have a stupid question to ask.

  Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

  Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

  Maybe you all have no idea to provide.

  It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

  Generally it is not a heavy load, however.

• 4 Aironet 1250 and a controller?

  Hi guys,.

  I'm about to order a four Aironet 1250 and a Wireless LAN Controller 2106. What I've read, I'm going to need the controller to manage access points if I want that they offer the same broadcast domain and subnet and offer roaming for users. Often times what I have read and understand it turns so little to do with reality, so my question is, do I right about that?

  Thanks in advance!

  Joe

  Hey Joe,

  210 x WLC doesnot support mode of transport Layer 2... support mode is the Layer 3. Yes, we can have the APs in the same field of dissemination that is, APs and WLC management and Manager of the AP in the same subnet works and it uses IP header instead of the Ethernet frame.

  We can connect the access points and clients can roam between. We need to ensure what WLC software takes care of 1252 and use the same or later.

  Concerning

  Surendra

• Configure to integrate Cisco ASA and JOINT

  Hello

  We have Cisco ASA and JOINT, need assistance on the integration of the same thing; Please email me so that I'll share the details of the architecture.

  Thank you best regards &,.

  REDA

  Hi reda,.

  If I correctly your diagram, you do not want to send any traffic from the external switch to the JOINT with a SPAN port and all traffic from your DMZ interfaces with another.

  Is this correct?

  If so, can you tell me why you want to inspect the traffic before it goes through the firewall? As I said in my original answer, we generally advise putting IP addresses after the firewall.

  Not to mention that in your case, I guess that some traffic will be inspected twice so you will need to assign a different virtual sensors to each JOINT internal interfaces to ensure that the same instance does not see the traffic of several times.

  Kind regards

  Nicolas