Cisco 1921: aboard the hw module not used?

Similar Questions

• SIM on the 3G module not found on Portege R700

  Hello

  My configuration: R700-1DP (module 3G: Ericsson F3607GW) with 7 Pro 32bits.

  My problem is that the SIM card on the 3G module is not detected (by my provider Kit or Wireless Manager).

  But:
  -the SIM is OK: try on another PC
  -3G Module is OK: try another disc (with the same OS) on laptop computer and connection is OK

  On my laptop:
  -Wireless Manager was unable to initialize the connection
  -the Device Manager: Ericsson is OK on the Modem
  -We will active the module with Fn + F8 (configfree, we could see Activating/Deactivating the module)

  I have updated to pilots of 3G, remove and reinstall, try to change the COM of DATA modem and modem port.

  After long hours... I don't know how to do now...

  Thank you.

  Kind regards

  I have question about this info in your message:
  > But:
  > - the SIM is OK: try on another PC
  > - 3G Module is OK: try another disc (with the same OS) on laptop computer and connection is OK

  What exactly do you mean by saying try another disc (with the same OS) on laptop computer and connection is OK.
  Once more, you reinstall Windows 7 system? If the connection works well, where is the problem?
  Could you clarify this misunderstanding?

  You know this Toshiba how to create a Dial-Up with the 3G connection?
  [How to create a Dial-Up with the 3G connection | https://aps2.toshiba-tro.de/kb0/HTD9802OF0000R01.htm]

  Please follow the step by step instructions and check if the 3G connection could be established.

• locking the computer: if not using computer for a while, it locks and requires the initial password to get in

  So do not use computer for a while, it locks and requires the initial password to get back in. When it becomes available, we've been thrown off internet, or another program we are.

  I don't know why Mr. Murphy suggested a system restore. Maybe he interpreted your post differently I did. You have your screen standby/power options defined on too short a time. You can also disable the requirement for a password during the recovery.

  Right-click on an empty area of the desktop and click on personalize. To customize the applet opens. Click the screen saver. Change the timeout to something reasonable like 10 or 20 minutes. You will see where you can clear the check box next to the "password required on curriculum vitae... ».

  Now do the same in the (Control Panel) Power Options applet. This link contains pictures showing you how to disable this option:

  http://www.mydigitallife.info/2008/06/29/disable-Windows-XP-and-Vista-from-asking-for-password-to-unlock-on-wake-up-resume-from-sleepstandby/

  MS - MVP - Elephant Boy computers - don't panic!

• How to disable the password screen when the computer is not used for a few minutes

  original title: password problems

  How can I stop my computer from ebb to needing a password, if not used for a few minutes

  Right-click your desktop image and select Customize,

  Click on the link at the bottom right, screen saver

  Uncheck the underlined

  

• Join the nearest date "not used".

  I need to join the following tables by the next date "not previously signed" the nearest:

  start_table:

  st_id	start_dt
  start0	31-dec-2014
  Start1	January 3, 2015
  Start2	January 5, 2015
  start3	January 7, 2015
  Debut4	8 January 2015
  Debut5	January 14, 2015

  end_table:

  end_id	end_dt
  end0	January 1, 2015
  End1	January 2, 2015
  End2	January 13, 2015
  End3	January 15, 2015
  bout4	January 17, 2015
  end5	19 January 2015
  end6	January 20, 2015

  Result:

  st_id	end_id
  start0	end0
  Start1	End2
  Start2	End3
  start3	bout4
  Debut4	end5
  Debut5	end6

  start0 joined end0, because the closer to the date of the next 31-dec-2014 is 1 January 2015

  Start1 joined end2, because the closer to the date of the next January 3, 2015 is January 13, 2015.

  Start2 joined end3, because as well as the date of the next more close January 5, 2015 is 13 January 2015, this is already accompanied Start1, so she joined next January 15, 2015.

  start3 joined bout4, because the date of the next although most close January 7, 2015 is 13 January 2015, this one is already joined by Start1, earliest date is January 15, 2015, but is also already joined by start2, then he joined the next available date January 17, 2015.

  Database: 11g

  Thanks in advance

  [UPDATE: changed line 37 to add "or cnt > = 0".] [This covers cases where there are more departures that ends at first.]

  Jiri.Machotka - Oracle wrote:

  I found a non recursive algorithm for this problem...

  I came up with something similar: no recursion, no joins, each table read only once.

  1. UNION ALL marked times 1 tables, with lines of departure and end marked lines - 1
  2. Order by date (first lines) and get a combination of 1's and - 1's.
     so when there are too many lines to end, the sum is negative.
  3. Get the previous cumulative minimum! Then take that end with a sum running lines, at less than the previous minimum.
  4. The remaining lines will have an end of line for each line of departure. Now number lines starting from 1 to N and the lines at the end of 1 to N, then match lines start and end in pairs. I use PIVOT to do this.

  WITH end_table (end_id, end_dt) AS (
    select 'end0',to_date('01-jan-2015','dd-mon-yyyy') from dual union all
    select 'end1',to_date('02-jan-2015','dd-mon-yyyy') from dual union all
    select 'end2',to_date('13-jan-2015','dd-mon-yyyy') from dual union all
    SELECT 'end3',to_date('15-jan-2015','dd-mon-yyyy') FROM dual UNION ALL
    select 'end4',to_date('17-jan-2015','dd-mon-yyyy') from dual union all
    SELECT 'end5',to_date('19-jan-2015','dd-mon-yyyy') FROM dual UNION ALL
    SELECT 'end6',to_date('20-jan-2015','dd-mon-yyyy') FROM dual
  )
  ,start_table (start_id, start_dt) AS (
    select 'start0',to_date('31-dec-2014','dd-mon-yyyy') from dual union all
    select 'start1',to_date('03-jan-2015','dd-mon-yyyy') from dual union all
    select 'start2',to_date('05-jan-2015','dd-mon-yyyy') from dual union all
    select 'start3',to_date('07-jan-2015','dd-mon-yyyy') from dual union all
    select 'start4',to_date('08-jan-2015','dd-mon-yyyy') from dual union all
    SELECT 'start5',to_date('14-jan-2015','dd-mon-yyyy') FROM dual
  )
  , start_and_end as (
    select -1 rowtype, end_id id, end_dt dt from end_table
    union all
    select 1, s.* from start_table s
  )
  , running_count as (
    select se.*,
      sum(rowtype) over(order by dt, rowtype desc) cnt
    from start_and_end se
  )
  , filtered_ends as (
    select rowtype, id, dt from (
      select rc.*,
        min(decode(rowtype,-1,cnt)) over(
          order by dt, rowtype desc
          rows between unbounded preceding and 1 preceding
        ) mincnt
      from running_count rc
    )
    where cnt >= nvl(mincnt,0) or cnt >= 0
  )
  select * from (
    select rowtype, id,
    row_number() over(partition by rowtype order by dt) rn
    from filtered_ends
  )
  pivot(max(id) for rowtype in(1 st_id, -1 end_id))
  order by rn;
  

  ST_ID END_ID RN

  ---------- ------ ------

  1 start0 end0

  2 Start1 end2

  3 Start2 end3

  4 start3 bout4

  5 debut4 end5

  Debut5 6 end6

• When the CBO would not use bitmap indexes available?

  I have a large data warehouse table in a star schema classic, with an index number of bitmap for the dimension tables. When you run queries that contain parameters for multiple indexes, the CBO will only use generally one or rarely two bitmap index.

  It seems to me that if the indexes are valid, statistics, the values of the parameters are present, etc and the CBO uses a bitmap index in an AND condition, he would like to use all those she could.

  there all the parameters that affect or bitmap how indexes him CBO will use? I'm looking for some advice on what to look for or research.

  Database is 11.2.0.3 base with no patch.

  Thanks in advance,

  Sean

  rp0428 - who has been deliberate because my question is not "how to solve this problem", that's exactly what I pointed out in my post. Just trying to see if there are all the controls to weight the decision-making community organizations in this area.

  OK - then let me simply state it.

  No - there are NO these parameters. But most of the posters are not really looking for a simple yes/no answer even if of many word of questions like that.

  See my response as of March 18, 2012 19:21 in this thread: https://community.oracle.com/message/10219613?

  Here I provide a simple table with SIX bitmap index, a query that uses predicates that combine values since the execution plan and the six columns indicating the different INDEX of BITMAP UNIQUE BITMAP, BITMAP or operations and BITMAP CONVERSION to ROWID.

  I won't repeat everything here, but this example should show you that Oracle will limit itself the way you suggest.

• Locations saved in the card module not migrated

  Hello

  I copied the mac to PC win10 Lightroom Catalog.

  Everything seems fine, except that my locations stored in the card module are not there.

  Where these are stored?

  I looked through the tables with a browser of SQLite, but I have not found where location data is stored.

  Thank you

  Stefano

  If you have the store pre-configured with the box checked catalog then you would have it transferred with the catalogue.

  

  Now you can simply migrate Mac locations for windows in the following locatioon:

  C:\Users\[username]\AppData\Roaming\Adobe\Lightroom\Locations------my position.

  ~ Sarika

• Team a full license can be used by another user, when the user does not use them?

  We currently have 2 cs5.5 master collection or allowed to 2c5.5 standard design.

  2 licenses of master collection are used full-time by 2 designers, but the design 2 licenses standards are shared between 4 users who only needs to access the software from time to time and us enable or disable on their computer as needed. Can do us the same thing with CC for teams and have installed more than users but activate it as a user has a need and then a week later, disable and let another user can access?

  Rafrafi: Hello. Welcome to the assistance of Adobe.

  Rafrafi: I received your request. Allow me a moment to check your account and review the details of your request.

  Ted Newman: ok thanks

  Rafrafi: With each license for creative cloud you can activate the product on 2 different machines but can use only one instance at a time.

  Rafrafi: Means that you cannot use these 2 machine together.

  Ted Newman: We want to purchase 8 licenses complete team, install all 8 on 20 computers and our peak load can be used at the same time, most of the time just 3 or 4 is used, but they will be spread across 20 machines from day to day, not always the same machine, is it possible? Do you understand what I mean. If a maxium of 8 but a dynamic distributed in 20 users who soak in one off but never more than 8 at the same time?

  Rafrafi: With creative cloud you invite users in the team.

  Rafrafi: With 8 licenses, you can invite 8 users.

  Rafrafi: It works 1 license per user.

  Rafrafi: So if you have 2 different users, using the same machine with a different user name to connect to the computer, it will not work.

  Ted Newman: up to 20 users needs 20 licenses of team?

  Rafrafi: Yes.

  Ted Newman: 8 even if only access at the same time

  Rafrafi: For a better understanding, you can contact our team of sales at 800-585-0774.

  Rafrafi: Yes. Because if you have 8 licenses you can activate it on 16 machines.

  Rafrafi: But can only use only 8 machine at any given time.

  Rafrafi: So you can activate creative cloud on 2 machines, but can only use 1 instance at a time.

  Ted Newman: ok purchase 8 licenses and install on 16 machines and use only 8 at the time. Have we not use the administration console to add and remove occasional users whenever they need to access? or is - this a withdraw permanent for users who leaves the company?

  Rafrafi: Yes you can remove users from the administration console and add them to the time where you need to add.

  Rafrafi: whenever you add them back they must accept the invitation.

  Ted Newman: ok great, thanks a lot

  Rafrafi: You're welcome.

  Rafrafi: Is there anything else that you need help?

  Ted Newman: No thanks

  Rafrafi: Should I close this case solved?

  Ted Newman: Yes please

• Should we include the NIC do not use during P2V?

  There are 2 NIC cards in a physical machine, but only one is used.

  During P2V, should we include both of them and remove one not in use on a virtual machine?  It is because we can choose the bad NIC card if we just choose a NIC card during the P2V process.

  Your opinion is requested.

  Hello

  When you perform a P2V conversion, try to remove all the devices that you do not use from the server.  This is also your chance to allocate hardware resources such as CPU or memory more or less, or adjust the allocated disk space.

  When the conversion is completed, you will need to reconfigure the network settings, so it is not really important which NIC you remove server.

  Best wishes / Saludos

  -

• Insert the statement do not using the MultiSelect values correctly

  I have a set of boxes MultiSelect displayed with in a cfloop. I named the MultiSelect boxes "MultiSelect #ID # with #ID #
  
  the value of KP for each record retrieved. I do this to make sure that each MultiSelect box has a unique name so that when I
  
  Insert data by using a query of < cfloop > names of are not in conflict. Here's the HTML for the selectbox.
  
  < select name = "" MultiSelect #ID # ' several size = "3" > (query #ID 'getNonRoleItemDetails) "
  < cfloop query = "getMultiitems" >
  < option value = "#AddInfoID #" > #Name # < / option > (these two values are taken from the "getMultiItems" query
  < / cfloop >
  
  Here's the query insert I use on the action page that uses this data.
  
  
  
  < cfloopquery getNonRoleItemDetails >
  
  < cfquery = name "Datasource =' #application.dbname # of the Insert_Multi_Records" >
  
  INSERT INTO tblItemDetailUpdates (ItemID, ItemDetailsListID, ItemDetailValue, ActionItemID)
  
  VALUES (#getNonRoleItemDetails.ItemID #, #getNonRoleItemDetails.ID #, ' #form ["MultiSelect" & ID] #', #ArrayOfIds [Counter] #)
  
  < / cfquery >
  < / cfloop >
  
  
  
  The problem I have here is that the query works correctly, but it is the insertion of the ID MultiSelect values selected (104, 105,
  
  (106), rather than the real names of these values (IOC, AP, AR... etc).
  
  
  I looked at the source code and each MultiSelect box is named correctly and uniquely. Insert inserts the correct ID
  
  values, but not the names.

  Sigh too bad I am a fool. Well at least I thought about it.

• How to turn off AutoComplete, using the config files - NOT using the Options &gt; privacy...

  Hello
  I have about 300 computers across the country that needs to turn off the AutoComplete for forms feature.

  Of course, it wouldn't be possible remotely on each machine and change the setting in Options > confidentiality > Firefox Will... > use the custom settings for history > remember search and form of history - it is not practical to use the subject: config screen because the address and toolbars are disabled by default to prevent users from navigating to other pages they are not intended to.

  I was wondering if there was a configuration file or a registry setting where I can change this setting in the backgorund, we can push the configuration files or a registry in a manner change on all the machines that would change this setting.

  Any help would be greatly appreciated.

  Dan

  I realized that you can not hide the AutoFill menu drop-down CSS anyway so abandoned that idea.

  I think that what follows in the prefs.js file could work, however, I am yet to try it on a PC it will be pushed out to. It works on my machine that I can see if:

  user_pref ("browser.formfill.enable", false);
  user_pref ("signon.rememberSignons", false);
  user_pref ("access code. "prefillForms", false);

• Satellite L50-B-177 - after upgrading the BIOS can not use the Polish symbols

  Hi, I'm newbie here. This is my first post, so sorry for the plain text.

  I have a problem with the laptop Satellite L50-B-177 1 month of my wife. After update BIOS (from Toshiba Service Station) to version 1.70 I have this problem: it is impossible to use symbols of Polish that comes with ALT + z, ALT + x, ALT + c. other - ALT + a - works normally.

  Problem is the operating system independent (even on the live session of Ubuntu). I understand that this is a specific problem for the location of the Poles, but causes cell useless for my wife (she is a teacher and write a lot of text). As much as I know BIOS downgrade is not available for customers, and the weeks of waiting for the new package of BIOS is out of the question.

  Any suggestions will be appreciated.

  Hello

  This problem occurred imadiately after updating the BIOS?

  Have you tried to set the BIOS settings by default once the update is complete?
  If this isn't it.

  Also, check if the Polish keyboard language was chosen correctly and as a default value.

  Comments are greatly appreciated.

• Cannot close My Documents, the window keeps reopening and is always in the foreground, can not use another program

  I have a serious problem with windows Explorer. It keeps opening in 'My Documents' and it is impossible to close. I can close it but it immediately reopens seconds - not enough time to click anywhere else.

  It is also blocked in the foreground so that I can't use any other program, the cursor will move immediately to My Documents as the active window. I can't even go to start - run - or Start - logoff or anything because as soon as I click anywhere on the active window is new my documents.

  I don't know what happened, but I think my 1 years pressed a weird combination of keys while she was playing with my laptop. It is not a virus, because I ran a full Kaspersky scan and everything seems fine. Everything works fine in safe mode as well. It's only when I go in the "unsafe" mode I have this problem. I tried to watch the registry key as he pointed to similar problems on these forums, but I can't find a userinit registry key. What can I please?

  Hello nikitaghosh,

  I know that you have performed a comprehensive analysis of Kaspersky and nothing came, but have you run any malware removal software?  I've included a link for the removal of malicious software below, please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/antivirus-2010-removal-the-virus-is-blocking/36d884f4-5fcc-46E9-9F27-cf189c131608

  Thank you

• 1 laptop in the House do not using wre54g amplifier - help!

  I have a Linksys wireless router that works very well in the case of beach, but was weaker in some parts of the House, so I recently took the wre54g amplifier and life is good for 2 / 3 computers.  I have 2 laptops running Windows XP, the latest service pack (1 IBM, the other Dell) and both of these laptops use the amplifier.  My Sony Vaio laptop is running Windows Vista 64-bit with the latest service pack and do not connect using the amplifier, but rather the lowest wireless router.  In addition, the connection drops frequently to the router, don't know if it's because the signal is weak or some other problem.  The Sony has a built-in by Atheros wireless card model AR928x, latest version of the driver 7.7.0.331.  I have also updated the wre54g firmware to the latest version yesterday, but he has not made a difference.  All 3 laptops connect using the same WEP key, even though I tried different tones and there is no difference.  It's really frustrating and not sure what to try next.  A few questions:

  (1) when I search or connect you to wireless networks, I see only one network (not a router) and another for the Extender, so I can't connect manually to the Extender.  Is it the way it is supposed to be?  I guess yes because my 2 other laptops with XP are the same.

  (2) is it possible to force a connection through the extender?

  (3) are there problems of compatibility with Vista?  I have searched the forum and read a lot of discussion, but found nothing on it.

  Any help is appreciated, would really like to fix this!

  OK, I solved this problem!  I removed the wireless network connection for my home network in Vista and created a new and now is using the extender connection and not the connection to the wireless router.  The connection to use the height of the 2, I would have expected, but this is not the case.  So, in the end, a simple solution.  Hope this helps someone to another share the same problem.

• tablespace as defined in the model of the index is not used for manually defined indexes

  Hello

  in the 4.0.1.836 version, I defined under model in Modeler, model, physics, use index of preferences / Data (I use the German version, I hope that I have translated correctly) an index template that contains a value for the attribute tablespace.

  For indexes that are generated automatically (as defined in the properties of my model under the generation of index DDL/auto/properties") it works fine. There was a thread on this already Tablespace for the automatically generated index. It works very well. However, for indexes that manually in a table there is no tablespace clause in the generated ddl script generated. Is this a bug or am I missing something?

  Thanks for your help,

  Jochen

  Hello Jochen,

  Yes.  You are right.  For manually defined indexes, the Index model is applied when the Index is created in the first place.  As these properties are in the physical model, it is only effective if the relevant physical model is open when the Index is created in the first place.  The Tablespace defined in the template is applied only if the physical model contains a Tablespace with the same name.

  I guess it's a bit inconsistent for the automatically generated index Tablespace clause is generated when the physical model is not open.

  David