Cisco 2112 and Apple TV Airplay wireless LAN Controller

Similar Questions

• Cisco Wireless Lan Controller 2504

  Hello:

  Hello; I lost the password to my wireless LAN controller. Everything was fine until a few days ago and now can not identify.
  Is it possible to recover. The model of controller is AIR-CAP2602E-A-K9, the software version is 7.4.110.0.

  Please, anyone, help me.

  Kind regards.

  Fernando.

  Check this box:

  http://www.my80211.com/Cisco-WLC-CLI-commands/2009/12/27/recover-your-WL...

  Concerning

  Remember messages useful rates

• Are Cisco 1130ag APs compatible with Cisco Wireless LAN Controller virtual?

  Are Cisco 1130ag APs compatible with Cisco Wireless LAN Controller virtual?

  It's... AP compatibility depends on the code that runs on the WLC. This is a matrix that is a good reference.

  http://www.Cisco.com/en/us/docs/wireless/controller/5500/tech_notes/wire...

  Sent by Cisco Support technique iPhone App

• Routing using Wireless LAN Controller

  I was wondering if Wireless LAN controller (5508) can manage routing? This is our problem.

  We have a remote site, where we have bunch of 2900 series just pass. The router belongs and is managed by the provider of the PHONE company.

  We would like to install a controller (5508) and as the controller would make the delivery for the following subnets:

  The company 10.10.10.0/24 network

  Guest network 10.10.20.0/24

  Mobile (iPhone / iPad) 10.10.30.0/24

  Management Interface (AP) 10.10.40.0/24

  Is this possible? Or we need a layer 3 switch or a router that can do the routing for wireless controller.

  If possible, we prefer NOT to use the TELCO routing router subnet wireless?

  DS

  Unfortunately is the WLC a diverter. It is layer 2 only.

  Steve

  Sent by Cisco Support technique iPhone App

• Cisco WLC and Apple TV Hello

  Hello

  I followed the guide on http://www.cisco.com/en/US/docs/wireless/technology/bonjour/7.5/Bonjour_Gateway_Phase-2_WLC_software_release_7.5.html on activation of Cisco WLC 7.5 with Apple TV good morning however I have a weird problem. I have some clients unable to see the apple TV connected to a different wireless access point while some may see the Apple connected TVs. I have attached my setup for reference. I would like to inquire about the use of LSS and so perhaps someone has encountered similar problems? The apple TV is discovered by the wlc on mdns-domain names.

  According to the document, multicast has been activated not however the discovery of the apple tv is intermittent of apple customers. Customer can discover apple tv 1 and 3 but not apple tv 2 and sometimes it can discover all 3 apple TV while client B is able to perceive all apple TV devices 3. All 3 apple TV devices are discovered by WLC and only apple TV service has been activated on WLC.  I was wondering if anyone has seen a similar question? Not too sure what can be the cause of it?

  Any suggestion is appreciated.

  Some of the docs didn't do it, but it is required as all my installation requiring Hello, set multicast implementation.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• WebAuth LOCAL with Wireless Lan Controller and ISE

  Greetings,

  We intend to set up a centralised comments with sponsored webauth wireless network. I didn't know that this will not work with our current WLC code (6.0.199.4) as 7.2 or later version is required.

  We have a project to upgrade the WLCs but he won't be ready before the deadline for the completion of the reviews wireless.

  I am using local WebAuth temporarily until the WLCs are ready. My questions are:

  1. am I correct that I can still authenticate ISE?

  2. Since local webauth does not cost support, does that mean I can't apply a pre or post auth ACL?

  3. can someone point me to a good guide for configuring local webauth?

  Thank you!

  Hi Leroy,

  In CWA you can push the AVPs desire in the final result because of the nature of the flow:

  -Comments will connect to the SSID.

  -WLC send wireless MAB ask (1st authentication). In response, ISE returns accepted with url-redirect-acl and redirect url.

  -WLC updates the client session and once http (s) generated WLC redirects the customer to ISE according to AVPs received at the 1st auth(MAB request).

  -The customer enters the identification information in the portal. ISE valid creds and refers to WLC one type COA to re-authenticate.

  -WLC re authenticates the client (2nd authentication) session, and at this point ISE can support AVPs custom as names of VLANS, Interfaces or space air dynamic ACLs.

  -WLC overrides the client session with the new attributes.

  Local Web Auth as you mentioned, there are 2 steps but the WLC "considers" cela a single thread.

  To the LWA, the flow is as follows:

  -The client connects to the SSID.  Since there is no involved L2 auth client through DHCP, captures an IP and arrives at WebAuth_Required. Redirect URL is configured statically on WLC and pre auth ACL allows client access to ISE during the auth phase.

  -Customer opens the browser and WLC redirects the customer to ISE, but breast of redirection, there is a 'return to WLC' action which indicates to ISE to send customer WLC virtual IP containing identification information of the client used for auth in portal comments.

  -In this way the WLC now "knows" the handed creds to ISE and this way there is a formal request from RADIUS WLC sends to ISE asking these creds. ISE links in return an accept, and this is how the WLC now "knows" that auth is correct and she should move client to RUN.

  LOA of the simplest way would be to define an Interface of comments and statically applying a restrictive ACL at the level of the interface rather than wait the AVP of AAA server.

  LWA is supported in this version at very low level and basic, but if you want a complex flow involving the pusher of the dynamic attribute you will need something higher to 7.2.110.0.

  Recommended version would be 7.6.130.0 as for now.

  Kind regards

  Antonio

• ALS IP Cisco 2901 and POLITICS with dual gateways LAN-based ROUTING

  Hello

  I am configuring a failover solution combined with the ACB using two bridges already configured. See the attached diagram.

  I currently have two ASA 5505 and a 2901.

  According to the example: http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/861-c... I've set up the following in the 2901:

  Interface Port - channel1.1
  encapsulation dot1Q 1 native
  IP 192.168.200.100 255.255.255.0
  intellectual property policy map RM-Comcast-traffic route

  IP route 0.0.0.0 0.0.0.0 192.168.200.200 track 1
  IP route 0.0.0.0 0.0.0.0 192.168.200.150 track 2
  Route IP 10.10.10.1 255.255.255.252 192.168.200.150

  IP extended ACL-Comcast-traffic access list
  object-group permit COMCAST_Routed 192.168.200.0 0.0.0.255 any

  RM-Comcast-traffic route map permit 1
  corresponds to the IP ACL-Comcast-traffic
  set ip next-hop check availability 10.10.10.2 1 excerpt 2

  object-group service COMCAST_Routed
  Eq ftp TCP
  TCP eq www
  TCP eq ftp - data

  ALS IP 1
  ICMP echo - 192.168.200.200
  threshold 2
  timeout of 1000
  frequency 30
  IP SLA annex 1 point of life to always start-time now

  ALS IP 2
  10.10.10.2 ICMP echo
  threshold 2
  timeout of 1000
  frequency 30
  IP SLA annex 2 to always start-time life now

  track 1 accessibility of als 1 ip
  Track 2 accessibility of ALS 2 ip

  I did some tests and the part of failover seems to work but the configuration of the ACB does not work as expected. Only thing missing track 1 each time delivering properly and trak 2 is declining.

  Any help clarifying the feasibility and practicality of this configuration is greatly appreciated.

  Dan

  Adding a value of AD won't fix ACB (sorry if I gave that impression).

  On the client that you are testing with can you look it's the example routing table ' netstat - nr ' example and see what it shows in terms of gateways.

  It can be that you want to debug your routing policy to see what is happening on the router.

  Jon

• Terms of wireless LAN Controller

  What is the purpose and reason for using virtual interface and port-management service, AP Manager?

  My bad... I mean WLC

  The Strip is telnet, ssh to the ip management. out of band is when the port has no real connection to your network. That is why the ip address of the service port is an ip address that is not part of your network shouldn't be routable in your network. In the case where your connection of loos to management and you do not know the commands for the cli, you can connect to the service port and use the GUI.

• Setting up autonomous HA - SKU Wireless Lan Controller

  Hello

  I ordered an AIR-CT5508-HA-K9. It is not match with WLC assets and there is no permanent AP license on this HA - SKU.

  I wonder if I can make any configuration or perform the software upgrade on the standalone HA - SKU?

  Thank you.

  You can do both, but you can use this HA - sku only for SINGLE sign-on or N + 1.  You can not use both as independent because you will get an error after 90 days.

  -Scott

  Evaluate the useful ticket *.

• wireless lan controller, allowing lag

  Hi all

  I used more than 47 ap on my 4402, and now he usually adds more, if I activate LAG happens with a WARNING saying it will delete all my interfaces, current - this true? or if I activate LAG it should still work as before?

  see you soon

  Carl,

  Activation of LAG does not remove interfaces.  So, if you activate the OFFSET and reboot, you should be fine.  Alternatively, you can configure another AP-Manager and bind it to the other port.

  See you soon,.
  Steve

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Cisco NAC does support Wireless LAN?

  Hello

  I know that Cisco NAC support LAN wireless. I sent myself with various brands of autonomous APs. These work very well using the in-band, out-of-band mode.

  However, Cisco has been mentioned for Cisco AP, with Cisco switches and Cisco NAC, out-of-band is supported. I tried this today and it's or Cisco's fake, which is highly unlikely, or I have not configured the portion of the NAC or the access point Cisco correctly, which is most likely? I wonder where am I wrong? Please someone advice me on this?

  Kind regards

  RAM

  + 6012-2918870

  Hi Jean Claude,

  You can now do out-of-band with wireless deployments, but you must have a Wireless Lan Controller manage your APs. You can't do it with autonomous APs.

  The guide below will for most of the configuration:

  http://www.Cisco.com/en/us/products/ps6128/products_configuration_example09186a0080a138cc.shtml

  Thank you

  Nate

• Version of the software Cisco Wireless LAN controllers & Licensing (controllers HA and APs Adder & licenses basic questions)

  In fact, one of my clients has two Cisco 5508 wireless LAN controllers installed in a site and back up and running now. one of them running software version 7.4 and the other running software version 7.6. Each of them works as a stand-alone controller with number of access points. Based on this scenario, answer below concerns:

  • Can we transfer all active licenses at one of them and use it as a HA free of charge?

  • Up to which version of the software, we can improve these controllers without any extra charge?

  • What we must do if we want to move two of them to version 8 software?

  Waiting to hear from you soon about my concerns.

  Here are a few notes:

  -Only licenses Adder can be reheberges to another controller. Base license cannot be rehosted unless the unit is THAT RMA would be.

  -Too long the WLC has a minimum of 50 access point license, so that the unit can be used for HA N + 1 or AP SSO.

  s ' it use SSO of AP, the WLC must have connections to subnets for layer 2 even due to the IP address of the interface.

  HA N + 1 can be used in sites different especially if the subnet do not align

  -Scott

• Integration of CISCO ISE with another controller wireless lan of the seller

  Hi all!

  I am currently working on an assignment and eager to integrate the identity service provider in the network. the only problem is that the deployed wireless network earlier of another provider I just need to know that either ISE has integration with the other controller feature wireless provider and can provide guest access control. The LDAP integration is also required.

  Waiting for help!

  Hello

  According to my knowledge Yes, Cisco ISE can be integrated with another controller wireless LAN of the seller, but limited. (Aruba, Rukus) and if you want to add the external identity group to your network, then LDAP integration is required.

• HP USB and wireless Lan update failed to install

  my USB hard drive can not be found and I noticed the Intel USB 3.0 extensible host controller FAILED to install the software update and also the Ralink Wireless network driver update / LAN also failed to install, I tried other USB hard disks, and they can also be seen, whats the fix for this please Thank you

  Well, it's different, I went to the control panel and found find and solve problems and clicked on it and went to the configuration of a device and ran the troubleshooting and it says problem found hardweree changes could not be detected...? which is weird, but Defected said... and it seems to work fine now, I listened to 2 and 1/2 hours of music and watcthed 2 complete movies and it seems to work fine now so there was me but still pretty strange thing that can happen thank you for your help and all who responded ) soon )

• Use AirPlay between my IPad and Apple TV, I have audio but no visual

  Use AirPlay between my IPad and Apple TV, I have audio but no visual. How can I get the picture, but also the sounds?

  Not all applications are enabled for AirPlay, it's the developer to