Cisco 526 Wireless Express Mobility Controller

We just bought to UC520, 526 and a LAP521 controller. We got the UC520 upward and running in 15 minutes, but the 526 does not include a lot of documentation. Can not have find the 521 AP on the network nor will it set the layer mode 2. I don't want to configure routing for a 4 Office of PC couche3. During installation, the only option it gives is layer 3 and the documentation says it will make layer 2? Can someone give me any assistance?

First of all, set up like you would a 4400 WLC or 2106. I will attach the link configuration guide here for you.

http://www.Cisco.com/en/us/docs/wireless/controller/4.1/Configuration/Guide/ccfig41.html

Many of the advanced features are disabled on the 526 but you set up substantially the same.

Dennis

Tags: Cisco Wireless

Similar Questions

  • Cisco 526 Wireless Express Mobility Controller supports AIR-LAP1140N?

    Does anyone know if Cisco 526 Wireless Express Mobility Controller supports the AIP-LAP-1140N Access Points?

    This isn't. The WLC526 supports only the AP521.

    HTH,

    Steve

  • Helps to configure a Cisco 4402 wireless controller

    Hello

    I need help setting up a Cisco 4402 Wireless Controller. I want to have users automatically connect to the wireless network, but not to have access to all the resources network until they open a web browser and provide their domain user name and password or a guest account provided by the receptionist.

    I tried many different configurations but can't seem to make it work properly. More time then not when I put on the WIFI network security it causes my wireless network to disappear from the list of wireless avaialbe.

    Here's my network configures:

    1 - 4402 wireless LAN Controller

    2 - Aironet 1130AG antennas

    1 - 5510 cisco ASA

    1 - 4503 core Router\Switch

    8-2960G switches

    Windows domain Server 2003 with RADIUS running on the domain controller.

    Thanks in advance for the help.

    Glad you got it working...

  • in Cisco licenses a single model controller WLAN HA

    Hi all

    I am performing an estimate on the CCW. I have to configure a wireless controller with 12 licenses the AP based on the Cisco model. Please find below the BOM:

    C1-AIR-CT5508-K9 Range Cisco ONE - 5500 controller WLAN w / 0 AP PFR
    CON-SNT-CT5508K9 SNTC-8X5XNBD C1-5500 Wireless LAN Con w / 0 AP PFR
    LIC-CT5508-BASE Basic software license
    ECMU-CON-LICCT8BAS Southwestern Scotian platform upgrades the software Base Licens
    C1-MSE-PAK Cisco MSE license a PAK
    C1FPAIRK9 Cisco ONE perpetual Foundation - wireless
    ECMU-CON-C1FPAIR Southwestern Scotian platform is LEVEL C1 perpetual Foundation - wireless
    C1-WLC-1 THE Cisco Wireless LAN Controller PA license (any WLC)
    C1-WLC-PAK THE Cisco Wireless LAN Controller AP License PAK (all WLC)
    C1-PI-LFA-AP-K9 PI license Cisco FOR LF & as WLAN device
    C1-ISE-BASE-AP Cisco identity services 25 Lic endpoint database engine
    C1-MSE-LS-1 A Base of CMX Cisco (location + Connect) - 1AP license
    C1-CEM-25-K9 Cisco energy Mgmt Perpetual Lic - 25 end Points
    C1-CAND-1 Cisco connected THOSE Analytics Net deployment - 1 Dev Lic 1 year
    C1-LC-5-1Y Cisco a 5 fps 1 year Lic StealthWatch
    C1F1VAIR-02 Tracker PID v02 Fnd Perpetual AIR - no delivery
    SWC5500K9-80 Cisco Unified Wireless Controller version 8.0 SW
    AIR-PWR-CORD-THIS AIR Line Cord Central Europe
    AIR-PWR-5500-AC Cisco series 5500 redundant power wireless controller

    Now, I have to configure a controller HA. In the CISCO model, the SKU is the same as the controller, which I configured above.

    Configure the controller HA without AP licenses?

    Please give me the best way to configure the WLC HA in the Cisco model

    Hi Angel,

    If you get a C1-AIR-CT5508-K9 , then you should not have licenses on the secondary unit (who you called unit HA). However if this is not the case then the usual requirement of license AP 50 County should hold to convert a secondary WLC. The number of licenses AP 50 can be registered license C1-WLC-1 pool.

    Hope I was able to clear the confusion.

    Best regards

    www.wifitrainers.com

    Learn from the best to be the best!

    Change the way you look at connectivity of wireless clients forever by registering to watch this free webinar and also a chance to win our starter kit worth $ 8000 wireless for free!

  • Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.

    Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.  I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor

    Hello

    HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.

    This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1

    If you can't make it work, you must decide between a new card or another router.

    Personally, if it's new and I could return it, I'd get a different router model. But YMMV

    ------------

    My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Wireless Xbox 360 Controller for Windows all of a sudden not connect into any USB port

    Original title: Wireless Xbox 360 Controller for Windows issue.

    Hi, I bought this back in 2008 and it has been flawless since today... I tried to use it and the controller is unable to connect to the receiver.

    There is no light on the receiver, even when I plug it into a different USB port there is still nothing... I even tried another computer. I assume the receiver is nakered?. Can anyone shed some light on this?

    If the receiver is so broken, can I buy this receiver on its own and that it will be compatible with my wireless controller Xbox 360 instead of having to buy another expensive controller...

    Thank you very much.

    Hello

    I suggest you to post your questions or comments about the Xbox 360 Forums, so that you will be provided with the assistance of your Xbox 360 product.

    Link: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

    Hope this information helps you.

  • Disable or wiping "Cisco Configuration Professional Express."

    Hello

    We use a new Cisco1921-SEC/K9 comes with a new IOS (15.2 (4) M1). To use the feature of SSL - VPN from outside we activeted 'secure http server. I tried to check the security of the inside (we use ZBF) and it appeared a "Cisco Configuration Professional Express" Web page with Java "and so on" - brrr - who designed this thing?

    Now us whant to disable or wiping the "Cisco Configuration Professional Express." Subtract the *.pkg and *.cfg flash with charging has not worked.

    How can we remove this 'Cisco Configuration Professional Express', because we do not like ist! I can't find a flag to config or something in the flash...

    Grüße

    Steve

    Steve,

    You can follow the procedure in the CCP Admin Guide (here) for the withdrawal of CCP.

    TL; DR.? Well (2 c seems to be specific to an AP installation):

    To uninstall the Cisco CP Express Admin View of the router flash memory, perform the following steps:

    Step 1 On the router, go to the directory in which Cisco CP Express Admin View files using this command:

    router# cd flash: 

    Step 2 Use the delete command to remove all Cisco CP Express Admin display the files and folders of the router flash memory.

    Note Ensure that you delete the files extracted from the ccpexpress27Admin.tar file and the ccpExpress_ap_express - security.shtml.gz.

    a. remove the home.shtml file:

    router# delete /force /recursive home.shtml 

    b. delete the ccpexp folder:

    router# delete /force /recursive flash:ccpexp 

    c. remove the file ccpExpress_ap_express - security.shtml.gz in the folder ap802-xxxxx-xx.xxx-xxx.xxx/html/level/15/ of the AGP flash memory:

    ap# delete flash:/ap802-ccw7-mx.124-25d.JAX/html/level/15/ccpExpress_ap_express-security.shtml.gz
  • PC wireless to Xbox controller will not sync

    Wireless pc Xbox controller will not work. It installs, but when I sync with the wireless receiver the controller, the controller just flashes and never made a connection, however, when I tried on my brother's computer, it works fine.

    I did search all over the internet I can find about this investigation, but had no luck. Help, please!

    Hello

    Check out the link and follow the steps.

    Xbox 360 Wireless Controller disconnects or unable to connect

    http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

  • Does anyone have a guide to the Cisco IPS Manager Express Administrator?

    Hello.

    Does anyone have a guide to the administrator of the Cisco IPS Manager Express?, I need to update my license some a procedure?, if I have an IPS with Bypass the configuration at the time of the closing of SPI interfaces will license update or will have no affection?

    Thank you.

    Here you will find guides - everything depends on your version:

    http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/products_installation_and_configuration_guides_list.html

    For example, here is the 7.1 version SEO licenses:

    http://www.Cisco.com/en/us/docs/security/IPS/7.1/Configuration/Guide/IME/ime_sensor_management.html#wp2219086

    Apply a license will not stop interfaces... However, if you apply an update of the signature, you'll stop traffic for a short time during the installation of the signatures up-to-date inspection.

    Hope that helps.

  • Wireless controller Cisco 526 & AP AIR-AP521G-A-K9-Question

    Hello

    We have several AP 521 in our headquarters main building as well as our remote branches, totalling about 16 AP, four in our main headquarters office and one in each brachh distance.    All AP at this moment are stand-alone devices.

    We are contemplating centralized management of ALL our AP devices implementing this controller 526, where we can handle easy to access list of mac or other parameters.

    Here are my questions based on reading some documents based on 526 controllers:

    1. I undersland these models AP and 526 controller model are EOL, - what are these end of Support - at this time we are not planing to migrate to the new AP devices yet, maybe in 2-3 years on the road, but definatetly SmartNET is a must on these.

    2. for 526 be able to handle any device of AP, is the peripheral access point must be converted on KNEES, is that correct?

    3. as I read, 526 controller can support up to 6 devices AP 521, if this is the case for example... I can say install a 526 to the main AC controller which has only FOUR peripheral wireless AP and be able to manage also the 2 more devices AP of REMOTE offices that are not directly connected to main office switches HQ but to have connectivity that are across our links WAN MPLS or (wireless AP) should be directly connected to the LAN so that the 526 be able to manage devices, if possible, then that would allow me to implement 3 526 controllers in the HQ Office to handle all 16 devices AP of our entire company... Please correct me if that's not true.

    4. and finally, for example, say I have MAC ACL applied to each AP devices, now with the 526 controller if we go about using centralized management would be that I could create a MAC acl and indicate to the Scheduler to propagate the ACL to the devices all THE AP which are under its management?

    Thank you for your help

    Concerning

    1. This is the end of life announcement:

    http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/end_of_life_c51-568040.html

    2. Yes, LWAPP APs are easier to manage from the 526:

    http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/product_data_sheet0900aecd8060c22b.html

    3. you will be well on MPLS for AP to join a remote control. You may need to change the MTU if you have problems with the junction of AP.

    However, remember that if you are MPLS connection goes down, you lose connectivity, so it is a design decision to make.

    4. in the list of features, you should be able to:

    http://www.Cisco.com/en/us/docs/wireless/controller/526/1.5/configuration/guide/A3_feature_list.html

  • Configuration Cisco AP 2600 (AIR-CAP2602I-E-K9) and Cisco 2500 wireless controller?

    This is the first time that I work with this type of devices (Cisco Ap 2600 (AIR-CAP2602I-E-K9) and wlc 2500)... my experience to the CCNP (router and Switch)

    How configuration Cisco Ap 2600 (AIR-CAP2602I-E-K9) and wlc 2500?

    Please find attachment (Cisco device map)

    Hello

    Here are the docs for you to configure the Basic for AP switch port configuration IE 2600 s and wlc.

    WLC port must be configured as a trunk.

    Port of the AP must be access.

    CAP2600 series requires software 7.2.110.0 wlc minimum (make sure you have it or above release)

    Upgrade if you follow it.

    http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml

    1. http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml (SW port configs)

    2. http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

    (Another thing very importand, discovery mechanism, choose properly)

    If you choose the option dhcp 43, it uses the TLV format. Type is always f1, the length is 4 * (wlc number for which you want to provide discovery for, in your case) Value = Hex conversion of the wlc management ip address.

    A video for the process of

    http://www.youtube.com/watch?v=oOh_Iv1CHxQ.

    Thank you

    Sahil

  • have a cisco CISCO2106 wireless controller. I have configured mangement interface and AP-Manager in this. I can now connect to WLC, through the management interface, but the problem is AP-manager interface to SURVEY not so AP aren't the assoc

    What do you mean that's not upward? Can you please upload config and debug? What output do you see on the side of the AP using the console port?

    What is the method of discovery?

  • Questions of VLAN and configuration for Cisco AIR-CT2504-25-K9 Controller

    Hello

    It's my first time thanks to the Cisco wireless solutions, so I was hopping someone could help me with the following:

    We just bought the AIR-CT2504-25-K9 controller with some points of access for the AIR-CAP1702I-E-K9.

    The network is as follows:

    Peripheral layer 3 (managed by third parties): it's on the domain network. (VLAN by default, 1 - unidentified)

    ADSL router - it's the network without comment thread. (Default Vlan 4 - tagged).

    VOIP: VLAN 5.

    Both fittings go into a switch Cisco SG500 52 (Layer 2). There is a port to shared resources on the switch SG500 with VLAN 1 (Tagged) and VLAN 4 (with tag). The WLAN controller is plugged into this port trunking.

    The data and management network are in the same subnet and on the same VLAN (1).

    I used the wizard on the controller setup.

    There are three interfaces:

    management VLAN ID 1 IP 192.168.1.2 Port 1 (configured with a gateway domain network, DHCP, etc.).

    VLAN wireless identifier 4 IP 192.168.5.1 Port 1 comments (configured with modem router ADSL, DHCP, etc.).

    Virtual IP 192.0.2.1

    Proxy DHCP active overall.

    There are two wlan networks:

    (1) area - management Interface - SSID abc.

    (2) comments - comments Wireless Interface - SSID xyz (the wizard put to management, but I changed it to the wireless).

    Are the AP connected to another SG500 switch which is shared resources to the switch with the controller.

    Ports of the APs are connected to have only 1 VLAN unidentified. They don't have 4 VLAN Tag or not identified. However, everything seems to work as expected.

    When I join the guest network (SSID xyz), I get an IP address from the router ADSL and all Internet traffic goes through him. When I connect to the domain network (SSID abc), I get an IP address from the DHCP in Windows Server and all traffic goes through the device of layer 3 (I checked the public IP address in my browser). I can't ping anything from one network to the other.

    My questions are the following:

    (1) how the guest network traffic (VLAN 4) headed the APs controller when they are connected to the ports on VLAN1? Is it because the traffic is encapsulated?

    (2) is set up correctly? After you configure the controller, I saw a note in the forums, this State I can simply enter 0 for the management of VLANS to let it not identified. However, in my case, I kept it as 1, which is the same as the switches and then the tag VLAN on the switch. In addition, the set Wizard wlan of comments to use the management interface but I changed it to use the comments interface.

    (3) when I connect to the APs of the controller, I see several options that can be configured manually. Is it necessary for this? For example, there is an option of data encryption.

    Thank you

    A

    Hello

    (1) how the guest network traffic (VLAN 4) headed the APs controller when they are connected to the ports on VLAN1? Is it because the traffic is encapsulated?

    Yes, I'm with CAPWAP:

    More information: http://lets-start-to-learn.blogspot.de/2014/08/cisco-wireless-understand...

    (2) is set up correctly? After you configure the controller, I saw a note in the forums, this State I can simply enter 0 for the management of VLANS to let it not identified. However, in my case, I kept it as 1, which is the same as the switches and then the tag VLAN on the switch. In addition, the set Wizard wlan of comments to use the management interface but I changed it to use the comments interface.

    If you want that mgmt interface must be unmarked and then put 0 otherwise you can use vlan 1.

    I do not have what is configured under mgmt and comments interface, but according to the name I'll say yes, you must set the comments under comments wlan interface.

    (3) when I connect to the APs of the controller, I see several options that can be configured manually. Is it necessary for this? For example, there is an option of data encryption.

    Yes, there are many things that you can configure, but I'll leave most of the default of things unless you really need to change!

    The following best practices: http://www.borderlessccie.net/?p=270

    Concerning

    Remember messages useful rates

  • Used to synchronize wireless xbox 360 controller for windows

    When I try to sync my controller wireless receiver for windows, the guide button light moving in a circle for a bit and the light on the receiver flashes, then guide button on the controller just flashes while the receiver is solid.  I am running windows XPI tested on two other computers (also XP) and my 360, it syncs very well, and the quadrant 1player lights.

    I installed the software supplied with the controller.
    I tried all the usb ports on my computer.
    I've uninstalled and reinstalled the software several times.
    I have a wireless mouse, and I tried to unplug and turn it off.
    I moved the receiver away from all other objects.

    I am running out of ideas and don't know why it won't work.  Can anyone help?

    Hi thedivinewind

    Welcome to the Microsoft Answers Forum!

    I recommend the methods are:

    Method 1:

    Check the drive Media Sharing service is set to automatic. Steps to follow.

    i. click on start and type services.msc in the search box

    II. Research Media player sharing service

    III. check if the following services are started, otherwise start it and set it to auto

    Steps to set the auto services

    i. search for the service

    II. right-click on the service

    III. If the service is stopped and then starts the service

    IV. Select Properties

    v. and in startup type, select automatic

    Method 2:

    i. Click Start, in the search box, type network

    II. Select network and sharing Center

    III. click on change advanced sharing settings

    IV network discovery. marketing

    c. the file running and sharing printer

    VI. click on save changes

    If the problem persists, you will need to contact Xbox community for additional support. Please visit the link below to find a community that will provide the support you want.

    - http://forums.xbox.com/

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Xbox 360 Wireless for windows controller keeps blinking

    Hello

    I bought the xbox 360 controller for windows with the receiver wireless. My pc detects the receiver and the software on the drive is installed, but my controller keeps blinking and won't connect. I tried to push the button on the receiver, press the small button on the controller between the triggers, but it still does not work. Can someone help me with this?

    Hello

    What operating system is installed on the computer?

    Method 1: See the following article:

    Troubleshooting your Xbox 360 Controller for Windows

    http://support.Microsoft.com/kb/908888

    Method 2: If method 1 is not enough, you can contact Xbox support forums.

    Here is the link: http://support.xbox.com/en-US/xbox-360/browse

Maybe you are looking for

  • export pictures from computer to phone

    are you able to export the photos of your comp. to your phone there are a few pictures that I want to use for the background on my phone

  • Suggestions to stop a sound

    Hi everyone, I am developing a background application that plays a different sound each incoming SMS based on the SmsDemo, I did. I changed the configuration of the profile of the SMS tone to put it on mute, and the app plays a sound when a text Mess

  • How to secure Interview session URL

    Dear developers of OPA,We use the OPA cloud in our project.  Can you please indicate if it is possible to get the URL of interview Web determinations with authentication of the user name and password?  I found security to web service API in the guide

  • Problems with clicking and scrolling when you are using the mouse in IE

    Separated from this thread. Original title: Problems with clicking and scrolling when you are using the mouse I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify. 

  • Error 720 in windows 8

    View your connections Open charm bar (you already know how to open it) or press on "start key"(ancienne clé de fenêtre clavier) and 'C' "» Click networks Select your profile Right click and view the connection properties Go to the Networking tab Clic