Cisco 850 routing issues

I am trying to configure a cisco 850 router but I can't do a ping to the outside world of Vlan1. show running-configLooks follow

Current configuration : 5563 bytes!! Last configuration change at 15:33:02 UTC Sat Aug 13 2016 by ciscoversion 15.2no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname fw2.myfw.tld!boot-start-markerboot-end-marker!!logging buffered 51200 warnings!aaa new-model!!!!!!!aaa session-id commonwan mode ethernet!!!ip dhcp excluded-address 10.10.10.1ip dhcp excluded-address 192.168.1.1ip dhcp excluded-address 129.x.x.5!ip dhcp pool ccp-pool import all network 192.168.1.0 255.255.255.0 dns-server 8.8.8.8 8.8.4.4  default-router 192.168.1.1  lease 0 2!         !         !         ip domain name mydomain.tldip name-server 8.8.8.8ip name-server 8.8.4.4ip cef    no ipv6 cef!         !         !         !         crypto pki trustpoint TP-self-signed-1017650632 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-1017650632 revocation-check none rsakeypair TP-self-signed-1017650632!         !         crypto pki certificate chain TP-self-signed-1017650632 certificate self-signed 01  3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030   31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274   69666963 6174652D 31303137 36353036 3332301E 170D3135 30343037 31303536   30375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649   4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 30313736   35303633 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281   81008B15 A50BCE53 C1A10611 78247737 97E31A5D 653AF401 024B244B F96B48E0   0A1B41EE 16FBFDD1 46F2E1E2 1329D2C6 EEFBCF5B 217DE650 7D2729B0 266008F3   AC4565EA 53D7FA5B 35761F14 6FBDCFAC 24994667 CB0311A9 7FE25580 7D9564C3   BFE10A4A F5F57C4F C4E18EC9 19874BCA 03127F56 252D04B8 9465A23F FBB9045B   D9EF0203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603   551D2304 18301680 146EAE54 B0C95DC2 0561F596 BC47E94B EF80617E F9301D06   03551D0E 04160414 6EAE54B0 C95DC205 61F596BC 47E94BEF 80617EF9 300D0609   2A864886 F70D0101 05050003 81810014 F5B63E51 AD80D4A0 3230E94D 3D1BE457   5D7CF78D 3C911F32 C7238D24 4A8C84D5 D5D4F744 EA2FFD5C 4A40E7A1 A517BFE3   10CC6078 5F446A15 F60EA41E 08C688AF A7834485 0991C739 F3CA38FE CFAA31E2   C72031C1 BAEFA756 719E4903 705C98A7 E20CB004 6FC82D22 D4E62E0C DBA54481   F6A68B3D AA905352 DD76B19F CD4190        quit!         !         username cisco password 0 somepasswordusername admin privilege 15 secret 5 $1$JJZR$kw8yTTHkjUGKIfB8sQiyJ0!         !         controller VDSL 0 shutdown !         ip telnet source-interface Vlan1ip ssh port 2222 rotary 1ip ssh source-interface Vlan1ip ssh rsa keypair-name 1024!         !         !         !         !         !         !         !         !         !         !         !         interface ATM0 no ip address shutdown  no atm ilmi-keepalive!         interface Ethernet0 no ip address shutdown !         interface FastEthernet0 no ip address!         interface FastEthernet1 no ip address!         interface FastEthernet2 no ip address!         interface FastEthernet3 no ip address!         interface GigabitEthernet0 no ip address!         interface GigabitEthernet1 description PrimaryWANDesc_WAN interface ip address 129.x.x.5 255.255.255.0 duplex auto speed auto!         interface Vlan1 description $ETH_LAN$ ip address 192.168.1.1 255.255.255.0 ip helper-address 192.168.1.254 ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1412!         ip forward-protocol ndip http serverip http access-class 23ip http authentication localip http secure-serverip http timeout-policy idle 60 life 86400 requests 10000!         !         ip dns serverip nat inside source list nat-list interface GigabitEthernet1 overloadip route 0.0.0.0 0.0.0.0 GigabitEthernet1!         mac-address-table aging-time 15no cdp run!         !         !         banner exec ^C% Password expiration warning.-----------------------------------------------------------------------

Cisco Configuration Professional (Cisco CP) is installed on this device and it provides the default username "cisco" for  one-time use. If you have already used the username "cisco" to login to the router and your IOS image supports the "one-time" user option, then this username has already expired. You will not be able to login to the router with this username after you exit this session.

It is strongly suggested that you create a new username with a privilege level of 15 using the following command.

username <myuser> privilege 15 secret 0 <mypassword>

Replace <myuser> and <mypassword> with the username and password you want to use.

-----------------------------------------------------------------------^C        banner login ^C-----------------------------------------------------------------------Cisco Configuration Professional (Cisco CP) is installed on this device. This feature requires the one-time use of the username "cisco" with the password "cisco". These default credentials have a privilege level of 15.

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE  PUBLICLY-KNOWN CREDENTIALS

Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use.   

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.

For more information about Cisco CP please follow the instructions in the QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp -----------------------------------------------------------------------^C        !         line con 0 no modem enableline aux 0line vty 0 4 access-class 23 in privilege level 15 transport input telnet ssh!         scheduler allocate 60000 1000!         end   

I am connected via the port console of the router and can ping the outside world only from port GigaEthernet1 whose IP address129.x.x.5

Clients that connect on VLan1 get IP addresses in the range of 192.168.1.0/24 and these clients can ping each other, the gateway that is 192.168.1.1 and the GigaEthernet1 that has the intellectual property129.x.x.5

What's not in this case?  Any suggestion is appreciated the most.

 
         
        
@[email protected] / * /;
Thanks for your post. I had a look at your configuration, and it is great that you are a few short steps on your NAT is why it does not work. Please follow the steps below in order to get this work properly.
1. first of all, let us remove the old configuration NAT then back to a clean slate with the following commands.
no ip nat inside source list nat-list interface GigabitEthernet1 overloadclear ip nat translation *
2. now, we will create a list of access control allows for NAT traffic and create the new NAT statement for that tie together. * NOTE: If the version of IOS, you are running requires mask rather than generic then change 0.0.0.255 to 255.255.255.0.

access-list 100 permit ip 192.168.1.0 0.0.0.255 anyip nat inside source list 100 interface GigabitEthernet1 overload
3. the next step is to specify the logical role of the interfaces in question, whether they are 'inside' or ' outside'.

interface vlan1 ip nat inside exitinterface GigabitEthernet1 ip nat outside exit
4. Finally, save us the configuration and reload.

copy run startreload
After the unit is returned as a result of charging, please try again. In some cases - depending on the version of the IOS, you have to ping the outside world from a computer on the local network rather than just sourcing of the interface VLAN. Try this back and forth, and let me know how get you there. I can't wait to hear back.


Kind regards

Luke Oxley


Please evaluate the useful messages and mark the correct answers.

Tags: Cisco Network

Similar Questions

  • LAN does not work when the Cisco E1000 router hangs

    Original title: Download sp3

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought recently a new Cisco E1000 router. My computer is a laptop model Lenovo 0769.

    I am running windows XP with sp2. The cisco software requires sp3. I called support of cisco and even they couldn't get to download sp3. My network is wireless on the router and I had to install from another laptop computer on the system. My LAN does not work when hooked. What do you suggest to me.

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi mdenrique,

    1. what exactly do you mean by LAN (Local Area Network) does not work? You get the error message?

    If you have not installed Service Pack 3, try the following steps:
    Step 1: Download Service Pack 3
    see How to obtain the latest Windows XP service pack .
    b. scroll the window and click on "Download now the Windows XP Service Pack 3 package" to download the service pack.
    c. save the file on the desktop.

    Step 2: Install Service Pack 3
    a. open the file downloaded and follow the instructions in the wizard to complete the installation.
    b. restart the computer once the installation is complete.

    For more information, see steps to take before you install Windows XP Service Pack 3

    Note: Once you have installed service pack 3, install the router and check if the problem persists.

    Step 3: To troubleshoot LAN, run home and small Office Networking Troubleshooter
    a. Click Start and then click Help and Support.
    b. under Pick a help topic, click Network and Internet.
    c. under network and the Web, click on resolution of networking or Web problems and then click on home and small Office Networking convenience store.
    d. answer the questions in the troubleshooter to try to find a solution.

    For more information, see the following articles:
    1 see How to troubleshoot a network in Windows XP
    2 see two resources to solve the problems of connection network in Windows XP

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cisco Wireless router model WRT120N guard give up Internet connection

    My wireless router will work for 6-8 hours, and then remove the connection to the internet.   I switch the modem and the router several times to re-establish the connection.  I'm also using a Netgear Access Point.

    I use:

    Charter high-speed Internet

    Motorola Modem

    Model Cisco WRT120N router

    Parameters

    Mixed-mode

    Channel Auto width - 20 MHz or 40 MHz

    Security - Personal WPA2

    Disabled SSID broadcast

    Firmware Version v1.0.04

    Automatic connection Type - Conf DHCP

    Beacon interval - 50

    Fragmentation threshold 2304

    RTS threshold 2304

    All other settings are default.

    When I unplug the modem to the router and plug it on the desktop I have internet service.

    The connection is also falling only on wired or wireless?

    Try to update the firmware on your router.
    Connect to the computer with the Ethernet cable to the router.
    Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
    After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

  • E2500 Cisco's router dual-band

    Hello

    I just install the Cisco E2500 router and set up my wireless network.

    I bought the router hoping it would give me a more powerful than my old G Linksys 2.4 Ghz signal.

    Using inSSider I see my router and unfortunately it seems that both the 2.4 Ghz and 5 GHz range are both at the same time. I need help. The strength of the signal under RSSI is - 60 to-57 for the 2.4 Ghz and 5 Ghz range.

    I have to turn off one of these groups or what should I do to get a stronger signal?... my old Linksys router was to-50.

    Help... I'm not at all intuitive on routers, but I think that I would have only one band at a time or someother setting needs to be changed in order to improve my signal strength.

    Where we cut a band anyway?

    Any help would be appreciated.

    Thank you

    Tom.

    Hi GV Expert,.

    Thanks for your explanation as to what is measured and its relevance.

    I would like to run the test that describe you.

    First; When you say to connect my computer to a single band, I say - would allow a band to achieve this result?

    In addition, how do you transfer a file, we are talking about transfer between my two computers?

    Thank you for your patience and your help.

    Tom.

  • Cisco 871 routing problem

    Hello.

    I have a Cisco 871 router with this network diagram

    10.218.10.117 host - 10.218.10.118 4 | CISCO 871 | 172.18.122.5-FE0 - 172.18.122.6 host

    I want the 172.18.122.6 host can do ping to the 10.218.10.117 host at the other end of the router, but its does not work, what is the problem with this config? could someone give me a hand?

    With the help of 1222 off 131072 bytes

    !

    version 12.4

    no service button

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    no password encryption service

    !

    hostname ALCALÁ-CNT-UIO

    !

    boot-start-marker

    boot-end-marker

    !

    enable secret 5 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

    activate the password XXXXXXXXXXXXXXX

    !

    No aaa new-model

    !

    resources policy

    !

    IP subnet zero

    IP cef

    !

    !

    !

    !

    !

    !

    interface FastEthernet0

    !

    interface FastEthernet1

    !

    interface FastEthernet2

    !

    interface FastEthernet3

    !

    interface FastEthernet4

    IP 10.218.10.118 255.255.255.252

    automatic speed

    full-duplex

    !

    interface Vlan1

    IP 172.18.122.5 255.255.255.0

    !

    router RIP

    redistribute connected

    10.0.0.0 network

    network 172.18.0.0

    !

    IP classless

    !

    !

    no ip address of the http server

    no ip http secure server

    !

    Dialer-list 1 ip protocol allow

    !

    !

    control plan

    !

    !

    Line con 0

    no activation of the modem

    line to 0

    line vty 0 4

    password XXXXXXXXXXXX

    opening of session

    !

    max-task-time 5000 Planner

    end

    Better compliance

    The f

    Jeff,

    Each host can ping their side? You have default gateways configured on the hosts?

    HTH,
    John

    Please note all useful messages *.

  • Problem starting the Cisco 2821 router

    Hello world

    I have cisco 2821 router. I am facing problem starting.

    someone suggest me what is the problem.

    Thanks in advance...

    VERSION of the SOFTWARE system Bootstrap, Version 12.4 (13r) T, (fc1)
    Technical support: http://www.cisco.com/techsupport
    Copyright (c) 2006 by cisco Systems, Inc.

    The ECC memory initialization
    .
    C2821 platform of 262144 KB of main memory
    Main memory is configured for 64-bit with ECC active

    ReadOnly initialized ROMMON
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80
    load complete, point of entry to the program: 0x8000f000, size: 0xcb80

    load complete, point of entry to the program: 0x8000f000, size: 0x26bc2cc
    Decompression of self-image: #.
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################################
    ################################################################# [OK]

    Smart init is enabled
    Smart init is sizing iomem
    MEMORY_REQ TYPE ID
    0003E8 0X003DA000 C2821 Mainboard
    1A 0X0025178C E3 0001AB
    0X00263F50 VPN on board
    0X000021B8 embedded USB
    Swimming pools public buffer 0X002C29F0
    Swimming pools public particle 0 X 00211000
    TOTAL: 0X00D65284

    If all memory conditions above are
    "UNKNOWN", you could use a non supported
    configuration or there is a software problem and
    the system may be compromised.
    Rounded IOMEM to: 14 MB.
    Using iomem of 5 percent. [14 mb / 256Mb]

    Legend restricted rights

    Use, duplication, or disclosure by the Government is
    subject to such restrictions as set out in paragraph
    (c) Commercial - limited computer software
    The rights to FAR clause 52.227 - 19 and subparagraph s
    (c) (1) (ii) rights to technical and computer data
    Clause of DFARS 252.227 - 7013 section software.

    Cisco Systems, Inc.
    170 West Tasman Drive
    San Jose, California 95134-1706

    Cisco IOS software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 T7 (9)
    Version of the SOFTWARE (fc3)
    Technical support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2008 by Cisco Systems, Inc.
    Last updated Friday, January 10 08 16:35 by prod_rel_team
    Image text-base: 0x400B1E74 database: 0x434A9AC0

    ERROR detected on Bus PCI1
    Try REINSTALLING all the modules in the system
    pci1_int_cause 0 x 00000240,
    pci1_err_addr 0 x 00091009, pci0_err_cmd 0x0000000A
    PCI Master Read parity error
    Abort target PCI

    R0 = r1 = r2 FFFFFFFF FFFFFFFF = 0 r3 = 45 80000 r4 = 0
    R5 = 303 r6 = 0 A7 = 1 = 0 = 100000 r9 r8
    R10 = 0 r11 = 465E4369 r12 = 0 r13 = 465E436A r14 = 0
    R15 = r16 r17 8 = 0 = C100 r18 = 0 r19 3400 101 =
    R20 = r21 0 = 40096828 r22 = FFFFFFFF r23 = r24 FFFF00FF = 0
    R25 = 469AAC64 r26 = 0 = 469AAC60 r28 = 0 = 469AAC5C r29, r27
    R30 = 0 r31 = 469AAC58 r32 = r33 FFFFFFFF = r34 = FFFFFFFF FFFFFFFF
    R35 = r36 = r37 = r38 = r39 FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF = FFFFFFFF
    R40 = FFFFFFFF = FFFFFFFF = FFFFFFFF = FFFFFFFF r44 r43 r42 r41 = FFFFFFFF
    R45 = r46 = r47 = r48 FFFFFFFF FFFFFFFF FFFFFFFF = r49 0 = 469AACD0
    R50 = 0 0 = 0 r53 r51 = r52 = 3040A 801 r54 = FFFFFFFF
    R55, r56 = FFFFFFFF = FFFFFFFF r58 r57 A000F000 = = 0 = 465E4358 r59
    R60 = r61 = r62 FFFFFFFF FFFFFFFF = r63 = 0 402E4B10
    GENS = 3400 103 mdlo_hi = my 0 = 251 00
    mdhi_hi = 0 = 0 badvaddr_hi = FFFFFFFF mdhi
    BadVAddr = cause = epc_hi 0 = FFFFFFFF FFFFFFFF
    EPC = 402E4B08 err_epc_hi = err_epc FFFFFFFF = FFFFFFFF

    ERR-1-FATAL %: interruption of the fatal error, reload
    err_stat = 0 x 0

    = Posts from Flushing (02: 37:51 UTC Wednesday, may 18, 2016) =.

    Messages in queue:

    02:37:51 UTC Wednesday, may 18, 2016: interrupt exception, signal CPU 22, PC = 0 x 0

    --------------------------------------------------------------------
    Software fault possible. On reccurence, you perceive
    crashinfo, 'show tech' and contact Cisco Technical Support.
    --------------------------------------------------------------------

    -Trace =
    $0: 00000000, AT: 00000000, v0: 00000000, v1: 00000000
    A0: 00000000, a1: 00000000, a2: 00000000, a3: 00000000
    T0: 00000000, t1: 00000000, t2: 00000000, t3: 00000000
    T4: 00000000, t5: 00000000, t6: 00000000, t7: 00000000
    s0: 00000000, s1: 00000000, s2: 00000000, s3: 00000000
    S4: 00000000, s5: 00000000, s6: 00000000, s7: 00000000
    T8: 00000000, t9: 00000000, k0: 00000000, k1: 00000000
    GP: 00000000, sp: 00000000, s8: 00000000, ra: 00000000
    EPC: 00000000, ErrorEPC: 00000000, GENS: 00000000
    MY: 00000000, MDHI: 00000000, BadVaddr: 00000000
    CacheErr: 00000000, DErrAddr0: 00000000, DErrAddr1: 00000000
    DATA_START: 0X434A9AC0
    Cause 00000000 (Code 0 x 0): Exception of interruption

    Writing crashinfo in flash: crashinfo_20160518-023752
    No reboot to warm storage
    System received a system error *.
    signal = 0 x 16, code = 0x0, context = 0 x 46905718
    PC = 0x40096d7c, Cause = 0 x 20, State Reg = 0 x 34008002

    Software Cisco IOS, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 (9)T7
    Version of the SOFTWARE (fc3)

    OK, the router is running on a train of "T".

    ERROR detected on Bus PCI1
    Try REINSTALLING all the modules in the system
    pci1_int_cause 0 x 00000240,
    pci1_err_addr 0 x 00091009, pci0_err_cmd 0x0000000A
    PCI Master Read parity error
    Abort target PCI

    Remove any all NM/NME or WIC/HWIC cards and restart again.  If the router is able to start properly, upgrade the router to a higher version.  DO NOT use another "T" train if it is needed.  Use instead a train of "M".

  • Cisco IOS router 837 - configure DDNS / dynamic DNS

    I have an Internet, connected to my Cisco router link. The package that I subscribed comes with a dynamic IP address. I said me, if I need remote access in the Cisco router, I need to enable the DDNS function. Is this possible on a Cisco router? I have been informed that this feature is not supported. Please help me

    Hi Bro

    Yes, Cisco ASA and Cisco IOS router supported DDNS. Just make sure you have the right version of IOS, which you could refer to this URL of Cisco http://www.cisco.com/en/US/docs/ios/12_3/12_3y/12_3ya8/gt_ddns.html#wp1202953.

    Please refer to the config below made with dyndns.org.

    !

    hostname INT-RTR1
    !
    IP domain name dyndns.org
    8.8.8.8 IP name-server
    !
    IP ddns update DynDNS method
    HTTP
    Add http://ramraj: [email protected] / * //nic/update?system=dyndns&hostname=&myip=>
    maximum interval of 30 0 0 0
    minimum interval 30 0 0 0
    !
    interface Dialer1
    IP ddns update hostname INT - RTR1.dyndns.org
    IP ddns update DynDNS
    !

    Note: hostname = INT - RTR1.dyndns.org was the host added/registered in the dyndns.org site.

    Note: Press Ctrl + V, then just type the symbol? When to add the CLI adds http://___ above.

    Note: ramraj:cisco123 is simply an example of an IDs in dyndns.org.

    You can also refer to this URL for more details http://www.petri.co.il/csc_configuring_dynamic_dns_in_cisco_ios.htm

    P/S: If you cela this comment is useful, please rate well :-)

  • How to use Layer 2 Ports on the Cisco 1841 router switch

    Hello

    I use the Cisco 1841 router with a single port layer 3 Fe0 and 8 Ports switched.

    I gave the IP on the Fe0 port which is connected to another router.

    Now I don't know how to use Layer 2 of the router switch ports.

    I tried to make one of the port as a Port of access by switchport mode access and connected my laptop and the same subnet given IP, but I can't ping my Fe0 IP port and vice versa, as I am also unable to ping my laptop router.

    Can someone explain to me how to use these ports on layer 2?

    Hi Muhammadatifmasood, take a look at the link below, I'm sure that you will find it useful.

    https://supportforums.Cisco.com/discussion/10919631/how-enable-routing-b...

    BenSamayoa

  • Cisco 2600 router as an IPSec client

    Hello

    Currently I use a Cisco VPN client software to connect to a remote server for IPSec on the workstations.

    I want to set up the IPSec client on Cisco 2600 router that connects to the remote server IPSec so that workstations can access subnet VPN without using VPN software.

    Can someone guide me on how to configure the IPSec client on the router?

    Thank you

    Hi Adam,.

    Sorry for my late reply, I'm a little sick.

    I have checked the logs and did small repro. For me, it seems that the server does not support NEM:

    It is disabled with NEM VPN server:

    Nov 30 00:13:56 [IKEv1 DEBUG]: Group = gsa3mle3, name of user = cisco, IP = 10.10.10.2, MODE_CFG: request received for the DHCP for DDNS hostname is: R1!

    Nov 30 00:13:56 [IKEv1]: Group = gsa3mle3 username = cisco, IP = 10.10.10.2, material Connection Client rejected!  Network Extension mode is not allowed for this group!

    The customer:

    * 1 Mar 00:45:56.387: ISAKMP: (1007): lot of 10.10.10.13 sending my_port 500 peer_port 500 (I) CONF_ADDR

    * 00:45:56.439 Mar 1: ISAKMP (0:1007): received 10.10.10.13 packet dport 500 sport Global 500 (I) CONF_ADDR

    * 1 Mar 00:45:56.439: DGVPN:crypt_iv after decrypt, its: 650BE464

    7BCF116E8E4DFF6C

    * 00:45:56.443 Mar 1:

    * 00:45:56.443 Mar 1: ISAKMP: content of the packet of information (flags, 1, len 92):

    * 00:45:56.447 Mar 1: HASH payload

    * 00:45:56.447 Mar 1: delete payload

    * 00:45:56.459 Mar 1: ISAKMP: content of the packet of information (flags, 1, len 80):

    * 00:45:56.459 Mar 1: HASH payload

    * 00:45:56.459 Mar 1: delete payload

    * 1 Mar 00:45:56.459: DGVPN: crypt_iv after encrypting, its: 650BE464

    Change it to client mode and try it.

    Kind regards

    Michal

  • Cisco 2611 router and RADIUS

    Greetings. First of all, let me start by saying that I am a fool, I know I am a fool and I apologize for wasting everyone's time. In fact, I do RTFM, RTFMs a lot, and I've yet to find a resolution.

    Secondly, I am setting up a RADIUS server in my test network. I installed Yopougon RADIUS on a Windows 2000 System. I have the following Setup on my Cisco 2611 router:

    With the help of 2297 off 29688 bytes

    !

    ! 17:20:27 PDT configuration was last modified Tuesday, May 20, 2008

    ! NVRAM config update at 17:20:29 PDT Tuesday, May 20, 2008

    !

    version 12.1

    no single-slot-reload-enable service

    horodateurs service debug datetime localtime show-timezone msec

    Log service timestamps datetime localtime show-timezone msec

    encryption password service

    !

    host Tester name

    !

    logging buffered debugging 10000

    AAA new-model

    RADIUS AAA server group RadiusServers

    ACCT-port of the server 172.26.0.2 auth-port 1812 1813

    !

    Group AAA authentication login default local RadiusServers

    AAA authentication login local localauth

    AAA authentication ppp default if necessary to group local RADIUS

    AAA authorization exec default local radius group

    RADIUS AAA authorization network default local group

    AAA accounting delay start

    start-stop radius group AAA accounting exec by default

    start-stop radius group AAA accounting network default

    AAA process 6

    Select the secret xxx

    !

    test username password xxx

    !

    clock timezone PST - 8

    clock summer-time recurring PDT

    IP subnet zero

    no ip domain-lookup

    !

    no ip bootp Server

    !

    interface Loopback0

    the IP 192.168.0.1 255.255.255.0

    !

    interface Ethernet0/0

    Description for the main network

    address IP X.X.X.X 255.255.255.128

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    NAT outside IP

    full-duplex

    No cdp enable

    !

    interface Ethernet0/1

    Description of network internal

    IP 172.26.0.1 255.255.255.0

    no ip redirection

    no ip unreachable

    no ip proxy-arp

    IP nat inside

    load-interval 30

    full-duplex

    No cdp enable

    !

    IP nat pool test X.X.X.X-X.X.X.X netmask 255.255.255.128

    IP nat inside source list 3 pool overload test

    IP nat inside destination list 3 pool test

    IP classless

    IP route 0.0.0.0 0.0.0.0 X.X.X.X

    no ip address of the http server

    !

    radius of the source interface Ethernet0/1 IP

    access-list 3 permit 172.26.0.0 0.0.0.255

    not run cdp

    public RO 15 SNMP-server community

    secret key of acct-port 1812 auth-172.26.0.2 - RADIUS server host port 1813

    RADIUS server retransmit 3

    key secret RADIUS server

    !

    Line con 0

    password xxx

    Synchronous recording

    line to 0

    line vty 0 4

    access-class 10

    1234567890 7 password

    Synchronous recording

    !

    NTP-period clock 17208108

    Server NTP 192.43.244.18

    end

    My RADIUS server is in place and respond to queries, but my router does not seem to be transferring applications to authenticate to it. In fact, when I connect to the router using HyperTerminal, it expires, and I find myself authenticate locally.

    I don't really like if my Cisco equipment authenticates with the RADIUS server, but I have to get set up to authenticate my users so that I can follow their time online. What I missed in my router configuration? Therefore no transfer requests to the RADIUS Server user authentication.

    Thanks for any assistance, you may be able to provide.

    If you explore the authentication Proxy and it works, it could make you forget the PPPoE fast enough.

    If you decide to pursue PPPoE, the following link is probably where you will find most of the information on the configuration of Cisco PPPoE:

    http://www.Cisco.com/en/us/Tech/tk175/tk819/tsd_technology_support_protocol_home.html

    "Providers" of Cisco forums could provide some guidance if PPPoE is achievable with your platform and environment?

  • Routing issue of Cisco VPN Client ASA

    Hi, I use a Barracuda NG for firewalls and I would use a Cisco ASA 5505 for VPN Client connections. But I have the problem that I can't get a connection to the VPN PC connected to the internal network. But I can reach the VPN connected PC from the inside. Here is a diagram of my network:

    Here the IP Configuration and the routing of the Barracuda firewall table:

    I have a route on the Barracuda NG to the 10.10.10.0/24 network VPN Client on eth0.

    The 192.168.1.0/24 LAN I ping the Client comes with Client VPN 10.10.10.11 as it should. But I can't ping or access network resources in the local network for AnyConnected customer's PC that connected through the VPN.

    Here is the config Cisco ASA:

     : Saved : : Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz : ASA Version 9.2(2) ! hostname leela names ip local pool VPN-Pool 10.10.10.10-10.10.10.200 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 5 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Vlan5 nameif dmz security-level 50 ip address 172.16.0.250 255.255.255.0 ! ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server 192.168.1.10 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network VPN-Pool subnet 10.10.10.0 255.255.255.0 description VPN-Pool object network NETWORK_OBJ_10.10.10.0_24 subnet 10.10.10.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip object VPN-Pool any access-list dmz_access_in extended permit ip any any access-list global_access extended permit ip any any access-list outside_access_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (inside,dmz) source static any any destination static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 no-proxy-arp route-lookup inactive access-group inside_access_in in interface inside access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz access-group global_access global route dmz 0.0.0.0 0.0.0.0 172.16.0.254 1 route inside 0.0.0.0 0.0.0.0 192.168.1.254 tunneled timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy server-type microsoft user-identity default-domain LOCAL aaa authentication enable console LDAP_SRV_GRP LOCAL aaa authentication http console LDAP_SRV_GRP LOCAL aaa authentication ssh console LDAP_SRV_GRP LOCAL aaa authentication serial console LOCAL http server enable 444 http 192.168.1.0 255.255.255.0 inside snmp-server location Vienna crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto map dmz_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map dmz_map interface dmz crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=leela proxy-ldc-issuer crl configure crypto ca trustpoint ASDM_TrustPoint1 enrollment terminal crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable dmz client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 no ssh stricthostkeycheck ssh 192.168.1.0 255.255.255.0 inside ssh timeout 30 ssh key-exchange group dh-group1-sha1 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.254-192.168.1.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept dynamic-filter updater-client enable dynamic-filter use-database ntp server 192.168.1.10 source inside ssl trust-point ASDM_TrustPoint0 dmz ssl trust-point ASDM_TrustPoint0 inside webvpn enable dmz no anyconnect-essentials anyconnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 1 anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 2 anyconnect image disk0:/anyconnect-linux-3.1.05170-k9.pkg 3 anyconnect image disk0:/anyconnect-linux-64-3.1.05170-k9.pkg 4 anyconnect profiles AnyConnect_client_profile disk0:/AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy DfltGrpPolicy attributes default-domain value group-policy GroupPolicy_AnyConnect internal group-policy GroupPolicy_AnyConnect attributes wins-server none dns-server value 192.168.1.10 vpn-tunnel-protocol ikev2 ssl-client webvpn anyconnect profiles value AnyConnect_client_profile type user group-policy portal internal group-policy portal attributes vpn-tunnel-protocol ssl-clientless webvpn url-list none username tunnel-group AnyConnect type remote-access tunnel-group AnyConnect general-attributes address-pool VPN-Pool authentication-server-group LDAP_SRV_GRP default-group-policy GroupPolicy_AnyConnect tunnel-group AnyConnect webvpn-attributes group-alias AnyConnect enable tunnel-group Portal type remote-access tunnel-group Portal general-attributes authentication-server-group LDAP_SRV_GRP default-group-policy portal tunnel-group Portal webvpn-attributes group-alias portal enable! ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 ! prompt hostname context no call-home reporting anonymous hpm topN enable : end no asdm history enable

    Can someone please help me solve this problem?

    When I tried to solve this I didn't choose which interface the Packet Tracer?

    The interface inside or DMZ interface?  Inside, he says it will not work with the dmz but the error did not help me

    Anyone here knows why it does not work?

    Hello

    Inside LAN is directly connected to the right firewall VPN... then I don't think you have to have the itinerary tunnele... can you try to remove the road tunnel mode and check.

    entrance to the road that is static to achieve 10.10.10.11 as its display is correct...

    Route by tunnel watch also with 255 administrative distance.  I've never used that in my scenarios... lets see...

    Concerning

    Knockaert

  • Newbie Help Needed: Cisco 1941 router site to site VPN traffic routing issue

    Hello

    Please I need help with a VPN site-to site, I installed a router Cisco 1941 and a VPN concentrator based on Linux (Sophos UTM).

    The VPN is established between them, but I can't say the cisco router to send and receive traffic through the tunnel.

    Please, what missing am me?

    A few exits:

    ISAKMP crypto to show her:

    isakmp crypto #show her

    IPv4 Crypto ISAKMP Security Association

    DST CBC conn-State id

    62.173.32.122 62.173.32.50 QM_IDLE 1045 ACTIVE

    IPv6 Crypto ISAKMP Security Association

    Crypto ipsec to show her:

    Interface: GigabitEthernet0/0

    Tag crypto map: QRIOSMAP, local addr 62.173.32.122

    protégé of the vrf: (none)

    local ident (addr, mask, prot, port): (192.168.20.0/255.255.255.0/0/0)

    Remote ident (addr, mask, prot, port): (192.168.2.0/255.255.255.0/0/0)

    current_peer 62.173.32.50 port 500

    LICENCE, flags is {origin_is_acl},

    #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0

    #pkts decaps: 52, #pkts decrypt: 52, #pkts check: 52

    compressed #pkts: 0, unzipped #pkts: 0

    #pkts uncompressed: 0, #pkts compr. has failed: 0

    #pkts not unpacked: 0, #pkts decompress failed: 0

    Errors #send 0, #recv 0 errors

    local crypto endpt. : 62.173.32.122, remote Start crypto. : 62.173.32.50

    Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0

    current outbound SPI: 0x4D7E4817 (1300121623)

    PFS (Y/N): Y, Diffie-Hellman group: group2

    SAS of the esp on arrival:

    SPI: 0xEACF9A (15388570)

    transform: esp-3des esp-md5-hmac.

    running parameters = {Tunnel}

    Conn ID: 2277, flow_id: VPN:277 on board, sibling_flags 80000046, crypto card: QRIOSMAP

    calendar of his: service life remaining (k/s) key: (4491222/1015)

    Size IV: 8 bytes

    support for replay detection: Y

    Status: ACTIVE

    Please see my config:

    crypto ISAKMP policy 1

    BA 3des

    md5 hash

    preshared authentication

    Group 2

    encryption... isakmp key address 62.X.X... 50

    ISAKMP crypto keepalive 10 periodicals

    !

    !

    Crypto ipsec transform-set esp-3des esp-md5-hmac TS-QRIOS

    !

    QRIOSMAP 10 ipsec-isakmp crypto map

    peer 62.X.X set... 50

    transformation-TS-QRIOS game

    PFS group2 Set

    match address 100

    !

    !

    !

    !

    !

    interface GigabitEthernet0/0

    Description WAN CONNECTION

    62.X.X IP... 124 255.255.255.248 secondary

    62.X.X IP... 123 255.255.255.248 secondary

    62.X.X IP... 122 255.255.255.248

    NAT outside IP

    IP virtual-reassembly in

    automatic duplex

    automatic speed

    card crypto QRIOSMAP

    !

    interface GigabitEthernet0/0.2

    !

    interface GigabitEthernet0/1

    LAN CONNECTION description $ES_LAN$

    address 192.168.20.1 255.255.255.0

    IP nat inside

    IP virtual-reassembly in

    automatic duplex

    automatic speed

    !

    IP nat pool mypool 62.X.X... ... Of 122 62.X.X 122 30 prefix length

    IP nat inside source list 1 pool mypool overload

    overload of IP nat inside source list 100 interface GigabitEthernet0/0

    !

    access-list 1 permit 192.168.20.0 0.0.0.255

    access-list 2 allow 10.2.0.0 0.0.0.255

    Note access-list 100 category QRIOSVPNTRAFFIC = 4

    Note access-list 100 IPSec rule

    access-list 100 permit ip 192.168.20.0 0.0.0.255 192.168.2.0 0.0.0.255

    access-list 101 permit esp 62.X.X host... 50 62.X.X host... 122

    access list 101 permit udp host 62.X.X... 50 62.X.X... host isakmp EQ. 122

    access-list 101 permit ahp host 62.X.X... 50 62.X.X host... 122

    access-list 101 deny ip any any newspaper

    access-list 110 deny ip 192.168.20.0 0.0.0.255 192.168.2.0 0.0.0.255

    access-list 110 permit ip 192.168.20.0 0.0.0.255 any

    !

    !

    !

    !

    sheep allowed 10 route map

    corresponds to the IP 110

    The parts of the configuration you posted seem better than earlier versions of the config. The initial problem was that traffic was not in the VPN tunnel. That works now?

    Here are the things I see in your config

    I don't understand the relationship of these 2 static routes by default. It identifies completely the next hop and a mask the bytes of Middleweight of the next hop. Sort of, it seems that they might be the same. But if they were the same, I don't understand why they both make their appearance in the config. Can provide you details?

    IP route 0.0.0.0 0.0.0.0 62.X.X... 121

    IP route 0.0.0.0 0.0.0.0 62.172.32.121

    This static route implies that there is another network (10.2.0/24) connected through the LAN. But there is no other reference to it and especially not for this translation. So I wonder how it works?

    IP route 10.2.0.0 255.255.255.0 192.168.20.2

    In this pair of static routes, the second route is a specific subnet more and would be included in the first and routes for the next of the same break. So I wonder why they are there are. There is not necessarily a problem, but is perhaps something that could be cleaned up.

    IP route 172.17.0.0 255.255.0.0 Tunnel20

    IP route 172.17.2.0 255.255.255.0 Tunnel20

    And these 2 static routes are similar. The second is a more precise indication and would be included in the first. And it is referred to the same next hop. So why have the other?

    IP route 172.18.0.0 255.255.0.0 Tunnel20

    IP route 172.18.0.0 Tunnel20 255.255.255.252

    HTH

    Rick

  • Cisco 867VAE configuration issues - does no routing between LAN &amp; WAN

    Im trying to configure a 867VAE to use our ADSL line. I can do to connect to the ISP, get an IP on their part and can ping 8.8.8.8 (Server DNS Googles) since the CLI routers but the side LAN does not work.

    Im just trying to assign static addresses to the side in the 192.168.1.0 LAN range, but it does not seem to carry the traffic from one side to the other. Can it be related to not being able to assign an IP address to all four ports Fast Ethernet (switch)? I get IP addresses cannot be set up on L2 links so Ive vlan1 configuration instead, but that cannot link to any real interface

    Attached is the current running config

    Can as a question you please recommend a good book to learn how to do this sort of thing?

    Thank you

    Hi ports 800 series which are l2 may not take an ip address like you because they are pure switch ports, so if you your using several VLANS part SVI Layer 3 must be set to the router and the switchports to shared resources, if only using the vlan 1 should not no need to trunk or make changes to these default ports , they are in the vlan 1

    You have a switch involved or are your PC connection directly to these ports, you set the gateway default ip address vlan 1?

    The interface vlan 1 shows to the top and to the top when you run int ip see the brief

    VLAN 1 is related to these ports, so when you connect to a pc with a correct address in this range him vlan will come and you should be able to ping from the local pc to the internet

    You don't have to bother with books that all things CCNA are on youtube and much easier to learn videos and books as you can see it being configured

    https://www.YouTube.com/playlist?list=PLF991927DF086C27C

  • Computer connection on another printer on cisco valet router

    I have a router (R1) provided by Verizon that connects me to the internet. Also connected to this router (R1) is a computer (PC1) and also my Cisco Valet (R2), which gives me connections wireless. Connected to the M20 Highway Cisco is a wireless (PC2) laptop and a printer wireless HP (PR1). Even if the Cisco M20 (R2) is connected to the internal network from Verizon (R1), PC (PC2) and printer (PR1) are on the internal network of Cisco (R2). I want (PC1) to be able to view and print to printer (PR1), but (PC1) on the router (R1) does not see printer (PR1). Laptop computer (PC2) also on Cisco (R2) can see and print it on the printer (PR1) very well, so wireless is not the issue. The issue is that PC1 must pass through and see PR1.

    PC1 <-->R1 R2 <--> <-->PR1

    If anyone can help with the configuration of the router. Thank you.

    What is the IP address of the main router and router M20?

    Ensure that both routers are in the same IP range.

    R1 is connected to the internet port M20?

    You connect 2 routers to each other. Use M20 as a wireless access point.

    Consider that the IP address of the main router is 192.168.1.1.

    Then change the local IP address of the M20 to 192.168.1.2. Disable the DHCP server on the M20.

    Connect the cable to the R1 to the port Ethernet 1 M20. In this way all devices will be in the same IP range.

  • Pavilion dv7. Intel Centrino Wireless-N 6150; Cisco E4200 router = No Wireless N connectivity

    Hello everyone, I need big answers and great help. I recently bought a HP Pavilion laptop dv7, who has a card intel centrino wireless-n 6150 installed. My router is a Cisco E4200 5 GHz wireless router. The pity is that the laptop (dv7) does not recognize my Wireless N (not even standing next to the router). Does anyone have any idea or advice on how to make this work?

    Any help will be appreciated.

    Thank you

    Hello

    Intel Centrino Wireless - N 6150 is a single band card (this card is the product of WiFi only single band 802.11bgn in the Intel Centrino Wireless 6000 series).

    Connect to the router, then activate the 2.4 GHz network (5 GHz network can be defined as being disabled).

    When you do this your wireless card should find network.

    Here you will find the guide of the user for the Linksys router.

Maybe you are looking for