Cisco 877 as a VPN server

Similar Questions

• Router Cisco 871 as a VPN server

  Hello!

  I have a Cisco 871 router which I want to implement a VPN (PPTP) server at home, so that I could connect to it from outside (from an Internet café, for example).

  All I need is to be able to use my IP of the home across the world just by connecting to the VPN through PPTP. The router would be the only thing connected to the internet in my house and it is not all of the devices connected to the router. Remote access to my IP is all I need.

  The problem is that I have no idea how to do that.

  So I would really appreciate if someone could help me with this,

  Thank you!

  Read the below URL

  http://www.Cisco.com/en/us/products/ps5855/products_configuration_example09186a0080ab7073.shtml

  HTH >

• How to Setup Cisco 1841 as a site to site VPN VPN server, with watch guard

  I would like to implement a cisco 1841 as a VPN server to establish s IP VPN (site to another) of a watch guard firewall,.

  I have looked through some examples of cisco config, but can't seem to get a lot.

  Can you please send me sample config steps I need o perform on the cisco router? and what credentials must be awarded to watch keeps establishing a permanent VPN?

  emergency assistance will be greatly appreciated.

  The cisco router is configured as a lan to lan normal IPSEC tunnel, there is no difference when configuration to create a tunnel to a watchguard/sonicwall or all that peer will use, you can use this link as a guide:

  http://www.Cisco.com/en/us/products/HW/routers/ps221/products_configuration_example09186a008073e078.shtml

  If you have problems make me know.

• Site to Site VPN Cisco 877

  Hello

  I'm trying to set up a VPN site-to site on a cisco 877 that connects to an ISA Server.

  It fails on Phase 2 with the following error:

  000320: * apr 21 12:11:07.028 PCTime: IPSEC (validate_proposal_request): proposal

  Part #1

  (Eng. msg key.) Local INCOMING = 83.X.X.X, distance = 87.X.X.X,.

  local_proxy = 172.16.25.0/255.255.255.0/0/0 (type = 4),

  remote_proxy = 87.x.x.x/255.255.255.255/0/0 (type = 1),

  Protocol = ESP, transform = NONE (Tunnel),

  lifedur = 0 and 0kb in

  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 0

  00323: * apr 21 12:11:07.028 PCTime: map_db_find_best found no corresponding card

  00324: * apr 21 12:11:07.028 PCTime: IPSEC (ipsec_process_proposal): proxy identity

  IES not supported

  In accordance with the foregoing, it seems to be using the public IP address of the peer for the 'Remote_Proxy' and not the local network: 10.0.0.0, 255.0.0.0

  In my definition of the crypto map, I have 'correspondence address 104", which is an access list which reads:

  access-list 104. allow ip 172.16.25.0 0.0.0.255 10.0.0.0 0.255.255.255
  access-list 104 deny ip 172.16.25.0 0.0.0.255 any

  Anyone know what can be the problem?

  Kind regards

  Simon

  If you can, try to ping from another device on the subnet 172.16.25.x.

• Easy vpn server issues of Cisco 800 series.

  Hello.

  I want to deploy the easy vpn server on cisco 876 and 877 10 routers and access from a remote location (company headquarters). When I leave the firewall of the router off the vpn server works. When I turn it on it doesn't.

  Although I allow all traffic to my ip for example 80.76.61.158 I can't access the vpn server.

  I tried a place to let the firewall off and it worked fine.

  I use SDM to configure the vpn server. Any ideas what I can do with the cause of firewall I really can't leave it "open."

  Thanks in advance.

  It would be a good idea to paste the configuration of the VPN server to the firewall.

  Kind regards

  Kamal

• Cisco 877 + VPN Site to Site

  Hello

  I'm new im this forum.
  I've set up a Site VPN site with 2 Cisco 877.

  SITE A:

  Address IP Adreess public: static
  Internal IP Adrees: 192.168.0.XXX
  Mask: 255.255.255.0

  SITE B:

  IP address public Adreess: Dynamics
  Internal IP address: 192.168.2.XXX
  Mask: 255.255.255.0

  I managed to do a ping on both sides, but I can't access file shares, and could rdp on any server in site A, by the internal IP address.

  Fix, is the SITES A and B SITE startup configs.

  Could you please someone help me?

  Hi Marcos,

  Really happy to know that the problem is solved. There is no need to apologize. Please mark this message as answered if there is nothing more.

  Rregards,

  Assia

• Cisco 877 using draytek 2600 VPN

  First I want to apologize for my complete lack of knowledge of cisco, I had the problem of replacing our dumped in my lap draytek routers

  Here's the background

  I have a cisco 877 router connected to our adsl broadband to our headquarters. I got this set instead of Nat and DHCP all working for allow multiple users internet access through our unique static ip address provided by the ISP lets say ip 1.2.3.4 address.

  Our internal network is 192.168.1.0 255.255.255.0

  I have a draytek vigor 2600 in a branch set up the same thing with a static IP address provided by the ISP allows to say that the investigation period is 5.6.7.8.

  The internal network is 192.168.4.0 255.255.255.0

  Here's the problem (except me)

  I'm trying to set up a VPN between the head office and branch so that branch office users to connect to our internal server (lets say ip is 192.168.1.2) to receive group policies, access files and also telnet on our database server (lets say ip 192.168.1.3).

  I have attached a kind of running the config that I restored the little I've read on this site and others. I tried these settings and other permutations of these settings, but I can't seem to establish a tunnel even if when I show tunnel0 int on the router it says tunnel is up and line protocol is up, if I show ip route shows that there is an ip address for the tunnel and it's all (no vpn indicator light lit).

  Could someone please take a look at the file and see if it makes sense and I got the right information. I highlighted the parts, I'm not sure in red (quite a bit and obviously not the exact settings, but I think it should be).

  And

  Once all the settings are correct on the cisco it will automatically establish vpn or what I have to deal since the draytek.

  Hello

  Can activate you ' debug cry isa ' and ' debug cry ips "and post ehre. Looks like the acl, transform set crypto or pfs settings might be incompatible. Ensure that all parameters of phase 2 are adapted to both ends.

  Kind regards

  Assia

• VPN ipsec Cisco 877 <>- iphone

  Hi, I'm trying implement the vpn ipsec between my cisco 877 and his iphone/cisco vpn client. First of all, what is the difference between remote access vpn and vpn installation easy? The phase 1 and the phase2 are completed but I don't have much traffic between peers.

  Maybe I missed something conf? Should I add the roadmap with acl 101?

  Here is the configuration of isakmp/ipsec.

  ISAKMP crypto enable
  session of crypto consignment

  crypto ISAKMP policy 10
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  life 3600
  ISAKMP crypto keepalive 10
  ISAKMP crypto nat keepalive 20
  ISAKMP xauth timeout 90 crypto

  ISAKMP crypto client configuration group to distance-vpn
  key to past
  DNS 212.216.112.112
  cisco877.local field
  10 Max-users
  Max-connections 10
  pool remotely
  ACL 150
  Save-password

  Crypto ipsec transform-set VPN-CLI-SET esp-3des esp-md5-hmac
  Crypto ipsec security association idle time 3600

  distance from dyn-crypto-dynamic-map 10
  transformation-VPN-CLI-SET game

  card crypto remotemap local-address dialer0
  card crypto client remotemap of authentication list userauthen
  card crypto isakmp authorization list groupauthor remotemap
  client configuration address card crypto remotemap answer
  remotemap 65535 ipsec-isakmp crypto map distance Dynamics-dyn

  interface dialer0
  remotemap card crypto

  IP local pool remote control-pool 192.168.69.0 192.168.69.20

  IP route 192.168.69.0 255.255.255.0 dialer0

  no access list 150
  REM list 150 * ACL split tunnel access *.
  access-list 150 permit ip 10.0.77.0 0.0.0.255 192.168.69.0 0.0.0.255

  no access list 101
  Note access-list 101 * ACL sheep *.
  access-list 101 deny ip 10.0.77.0 0.0.0.255 192.168.69.0 0.0.0.255
  access-list 101 permit ip 10.0.77.0 0.0.0.255 any

  Should I apply this acl 101 loopback?  Ex:

  overload of IP nat inside source list 101 interface Loopback0

  Should I apply an acl to permit as access-list 169 allow ip 192.168.69.0 0.0.0.255 any in my Dialer interface 0?

  Other tips? Best regards.

  Hi Alessandro,.

  The access tunnel split list is great!

  If you are NAT on public and private interface that is ip nat inside and ip nat outside etc.

  You must add the command ip nat inside source list 101 interface Dialer0 overload

  +++++++++++++++++++++++++++++++++++++++

  Or you can create a new roadmap

  new route map permit 10

  ACL #match 101

  command: ip nat inside the interface Dialer0 overload route map

  Thank you

  Adama

• Cisco 831 - easy VPN server

  Hello

  I am trying to create an easy VPN server on Cisco 831. When I "test" the easy VPN he said that it tested successfully, but when I try to VPN in the router of the built in Windows XP VPN client, I'm unable to connect.

  Does anyone have recommendations for how to configure easy VPN? I basically just selected all the default options. I was not able to find tutorials in the Cisco online documentation.

  Do I need to have the Cisco VPN client to connect to the Cisco router?

  Other thoughts?

  Your IP address pool you are trying to assign to remote users is part of your local network, which is not the best way to assign the ip address to the VPN Clients, and I've seen a lot of problems in the past were route it not forwards the packets to the client. This allows you to change the POOL of something other than your LAN. E.g. 192.168.1.0/24.

  Also, make sure that you re - configure your 102 ACL accordingly.

  Once you make changes, try to connect again and let me know how it goes.

  Kind regards

  Arul

  * Please note all useful messages *.

• Problem with ping VPN cisco 877

  Hi all!

  I have a working VPN between a fortigate and a Cisco.

  I have a problem with ping network behind the cisco of the network behind the forti.

  When I ping to vlan2 cisco without problem (192.168.252.1) interface, but I can't ping a server in the vlan2 (192.168.252.2) behind the cisco.

  However the Cisco I can ping the server. In the forti, I see that ping to the interface vlan2 and server in vlan2 take in the same way, and I can see package.

  I post my config could see it it as blocking the ping from 10.41.2.36 to 192.168.252.2 while 192.168.252.1 ping is OK?

  IPSEC #show run
  Building configuration...

  Current configuration: 3302 bytes
  !
  ! Last modification of the configuration at 14:42:17 CEDT Friday, June 25, 2010
  ! NVRAM config update at 14:42:23 CEDT Friday, June 25, 2010
  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime localtime show-time zone
  encryption password service
  !
  IPSEC host name
  !
  boot-start-marker
  boot-end-marker
  !
  logging buffered 1000000
  enable secret 5 abdellah
  !
  No aaa new-model
  clock timezone GMT 1
  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
  !
  !
  dot11 syslog
  IP cef
  No dhcp use connected vrf ip
  DHCP excluded-address IP 192.168.254.0 192.168.254.99
  DHCP excluded-address IP 192.168.254.128 192.168.254.255
  !
  IP dhcp DHCP pool
  network 192.168.254.0 255.255.255.0
  router by default - 192.168.254.254
  Server DNS A.A.A.A B.B.B.B
  !
  !
  no ip domain search
  name of the IP-server A.A.A.A
  name of the IP-server B.B.B.B
  !
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA aes 256
  preshared authentication
  Group 5
  ISAKMP crypto key ciscokey address IP_forti
  !
  !
  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac vpntest
  !
  myvpn 10 ipsec-isakmp crypto map
  defined by peer IP_forti
  Set transform-set vpntest
  match address 101
  !
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  interface Tunnel0
  IP 2.2.2.1 255.255.255.252
  source of Dialer0 tunnel
  destination of IP_forti tunnel
  myvpn card crypto
  !
  ATM0 interface
  bandwidth 320
  no ip address
  load-interval 30
  No atm ilmi-keepalive
  DSL-automatic operation mode
  !
  point-to-point interface ATM0.1
  MTU 1492
  bandwidth 160
  PVC 8/35
  VBR - nrt 160 160
  PPPoE-client dial-pool-number 1
  !
  !
  interface FastEthernet0
  switchport access vlan 2
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  switchport access vlan 2
  !
  interface Vlan1
  IP 192.168.20.253 255.255.255.0
  IP nat inside
  no ip virtual-reassembly
  !
  interface Vlan2
  IP 192.168.252.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  interface Dialer0
  bandwidth 128
  the negotiated IP address
  NAT outside IP
  no ip virtual-reassembly
  encapsulation ppp
  load-interval 30
  Dialer pool 1
  Dialer-Group 1
  KeepAlive 1 2
  Authentication callin PPP chap Protocol
  PPP chap hostname [email protected] / * /
  PPP chap password 7 abdelkrim
  myvpn card crypto
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 Dialer0
  IP route 10.41.2.32 Tunnel0 255.255.255.240
  !
  no ip address of the http server
  no ip http secure server
  The dns server IP
  translation of nat IP tcp-timeout 5400
  no ip nat service sip 5060 udp port
  overload of IP nat inside source list NAT interface Dialer0
  !
  IP access-list standard BROADCAST
  permit of 0.0.0.0
  deny all
  !
  NAT extended IP access list
  IP enable any host IP_cisco
  deny ip 192.168.252.0 0.0.0.255 10.41.2.32 0.0.0.31
  !
  access-list 101 permit ip 192.168.252.0 0.0.0.255 10.41.2.32 0.0.0.31
  public RO SNMP-server community
  3 RW 99 SNMP-server community
  SNMP-server community a RO
  SNMP-Server RO community oneCommunityRead
  not run cdp
  !
  !
  !
  control plan
  !
  !
  Line con 0
  password 7 abdelkrim
  opening of session
  no activation of the modem
  line to 0
  line vty 0 4
  password 7 aaaaa
  opening of session
  escape character 5
  !
  max-task-time 5000 Planner
  NTP-period clock 17175037
  Server NTP B.B.B.B
  Server NTP A.A.A.A

  end

  Alex,

  It's your GRE tunnel:

  interface Tunnel0
  IP 2.2.2.1 255.255.255.252
  source of Dialer0 tunnel
  destination of IP_forti tunnel
  myvpn card crypto

  You also have routing set by it.

  You don't need a GRE tunnel, nor do you need the road to tunnel if you want just IPsec tunnel.

• Cisco asa 5505 and centos VPN server connection

  Hi all

  Please I want to set up a VPN between Cisco asa 5505 and centos server.

  Here's my senerio

  -------------------------

  ASA 5505

  Public IP 155.155.155.2

  Local NETWORK: 192.168.6.X

  CentOS Server

  ------------------

  Public ip address: 155.155.155.6

  Thank you guys

  Apology, do you mean access remote VPN Client of hundred BONE for Cisco ASA 5505?

  If the remote access, here are the sample configuration:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008060f25c.shtml

• PlayBook &amp; cisco Easy VPN Server 831

  I don't seem to be able to connect to my router 831 cisco easy vpn server is configured by using my Blackberry Playbook.  Looking at the console of the router I can see Debugging but don't know what it means.  I have attached debugging as well as glued my setup, if someone is able to help me at all it would be much appreciated.  Thank you very much.

  Current configuration: 2574 bytes
  !
  version 12.3
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  enable secret 5 $1$ FM71$ y4ejS2icnqX79b9gD92E81
  enable password xxxx
  !
  username privilege 15 password 0 $1$ W1fA CRWS_Ritesh $ o1oSEpa163775446
  username privilege 15 secret 5 shamilton wFLF $1$ $ 8eRxnrrgVHMXXC0bXdEGi1
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  AAA - the id of the joint session
  IP subnet zero
  no ip Routing
  !
  !
  audit of IP notify Journal
  Max-events of po verification IP 100
  No ftp server enable write
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  ISAKMP xauth timeout 15 crypto

  !
  ISAKMP crypto client configuration group ciscogroup
  (deleted) 0 key
  DNS 172.16.60.246 172.16.60.237
  pool SDM_POOL_3
  ACL 100
  Save-password
  include-local-lan
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  crypto dynamic-map SDM_DYNMAP_1 1
  game of transformation-ESP-3DES-SHA
  market arriere-route
  !
  !
  card crypto SDM_CMAP_1 client authentication list ciscocp_vpn_xauth_ml_1
  map SDM_CMAP_1 isakmp authorization list ciscocp_vpn_group_ml_1 crypto
  client configuration address map SDM_CMAP_1 crypto answer
  map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
  !
  !
  !
  !
  interface Ethernet0
  IP 172.16.60.241 255.255.255.0
  IP nat inside
  no ip route cache
  !
  interface Ethernet1
  DHCP IP address
  NAT outside IP
  no ip route cache
  automatic duplex
  map SDM_CMAP_1 crypto
  !
  interface FastEthernet1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet2
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet3
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface FastEthernet4
  no ip address
  automatic duplex
  automatic speed
  !
  local IP SDM_POOL_1 172.16.60.190 pool 172.16.60.199
  pool of local SDM_POOL_2 192.168.1.1 IP 192.168.1.100
  local IP SDM_POOL_3 172.16.61.100 pool 172.16.61.150
  IP nat inside source overload map route SDM_RMAP_1 interface Ethernet1
  IP classless
  !
  IP http server
  no ip http secure server
  !
  Remark SDM_ACL category of access list 1 = 2
  access-list 1 permit 172.16.60.0 0.0.0.255
  Note access-list 100 category CCP_ACL = 4
  access-list 100 permit ip 172.16.60.0 0.0.0.255 any
  public RO SNMP-server community
  Enable SNMP-Server intercepts ATS
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  exec-timeout 120 0
  password xxxxx
  length 0
  !
  max-task-time 5000 Planner
  !
  end

  Stace,

  *Mar  1 06:40:15.258: ISAKMP: transform 1, ESP_AES
  *Mar  1 06:40:15.258: ISAKMP:   attributes in transform:
  *Mar  1 06:40:15.262: ISAKMP:      SA life type in seconds
  *Mar  1 06:40:15.262: ISAKMP:      SA life duration (basic) of 10800
  *Mar  1 06:40:15.262: ISAKMP:      encaps is 61443
  *Mar  1 06:40:15.262: ISAKMP:      key length is 256
  *Mar  1 06:40:15.262: ISAKMP:      authenticator is HMAC-SHA
  *Mar  1 06:40:15.262: ISAKMP (0:14): atts are acceptable.
  *Mar  1 06:40:15.262: ISAKMP (0:14): IPSec policy invalidated proposal
  *Mar  1 06:40:15.262: ISAKMP (0:14): phase 2 SA policy not acceptable! (local 14
  

  The other end offers AES 256 and SHA IPSec transform set.

  While you have configured:

  crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

  Suggestion:

  Add a new set of transofrm and apply it under crypto map.

  HTH,

  Marcin

• How to connect to the CISCO VPN server without using the CISCO VPN client (from dialog Windows VPN)

  Hello world

  I have a cisco router 2800 installed in our company
  and I have it configured as a VPN server for professional help (cisco configuration)
  with the ease of the VPN Server Wizard
  Can I connect to this server using windows XP or 7 dialog VPN?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers community. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• SOHO routers as a VPN server

  Hello

  Do you know if it is possible to use routers soho to accept incoming vpn tunnels, initiated by PC with "Cisco VPN Client"?

  Thank you

  Nuno

  The navigation feature (http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp) will help you here.

  Search by function, function is 'Easy VPN Server'. This will tell you what HW platforms and what code you need for them. You can use the navigation to all the features of IOS, very practical feature.

• 2651xm (IOS 12.4(9T) VPN server - default route

  When my clients connect to the VPN server, their default route prepared to go through the VPN. If they resemble the State of the connection, it shows "0.0.0.0 0.0.0.0" under the secure routes. I want to do so that one class C subnet is in the list. How can I do this?

  Thank you!

  This is called "split tunneling". For maximum security, you should not use it.

  Never done on IOS myself, but this would contribute to the code snippet:

  access-list 150 permit ip 30.30.30.0 0.0.0.255 any

  ISAKMP crypto group of hw-client-name client configuration.

  HW-client-password key

  DNS 30.30.30.10 30.30.30.11

  WINS 30.30.30.12 30.30.30.13

  domain cisco.com

  pool dynpool

  ACL 150

  Of http://www.cisco.com/application/pdf/en/us/guest/products/ps6659/c1650/cdccont_0900aecd80313bd6.pdf