Cisco Anyconnect mobile licenses

Similar Questions

• Installing AnyConnect Mobile licenses

  I want to clarify how exactly a Cisco AnyConnect Mobile license is applied to an ASA. Does as a PAK and then a license key is created? Y at - it a separate to enter specifically for the mobile command?

  The mobile license was delivered as a PAK who was converted into a license key.

  But today, you buy the mobile license more, instead you buy 4 AnyConnect more or APEX which includes the mobile service.

  If you already have Essentials or premium, you can get the license migration until the end of the year.

• Cisco Anyconnect Essentials License - What is it

  Hello community.

  I managed to install an ASA with Anyconnect. The Anyconnect client on my laptop works very well.

  But why now to buy a Cisco Anyconnect Essentials License, what exactly is this license?

  AnyConnect works fine without this license.

  But I can not connect with my IPhone with the Cisco Anyconnect for Iphone App. should I buy the Anyconnect for Mobile license and this license just for a single device or all devices. Because this license is really cheap. Cisco licenses normally are expensiv.

  Thank you and best regards patrick

  If you have not all AnyConnect Premium licenses, then you are limited to two simultaneous connections if you do not have the license of anyConnect Essentials. You are right, for i-devices (and Android...) you need the AnyConnect Mobile license.

  AnyConnect Essentials both AnyConnect Mobile are approved by ASA, not user connections. And AnyConnect Mobile needs AnyConnect essential or Preimium AnyConnect license must be activated.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• AnyConnect Mobile license

  Hello

  I have 2 questions about the mobile Anyconnect license?

  1. Why is there a mobile separate license for mobile devices for SSL VPN on an ASA firewall in addition to the regular essentials license, but when using the SSL VPN on the latest IOS routers, that a license is required? (I can connect to the IOS router with our mobile devices without error message)

  2 is supported for setting up Cisco IOS ssl vpn on demand router? (Trying to implement access remote jabber)

  1. it is a business of Cisco and just something we implementers should work with. For what it's worth, AnyConnect 4.0 is licensed differently and do not require a separate mobile license.

  2. I don't know about that one.

• AnyConnect mobile license, help

  Hello

  I'm a little lost with licensing

  I have an ASA 5510, and I would like to be able to use mobile devices (Android/iOS) with anyconnect.

  See below my "sh worm":

  ================================

  Cisco Adaptive Security Appliance Version 8.2 software (1)

  Version 6.4 Device Manager (9)

  Updated Wednesday, 5 May 09 22:45 by manufacturers

  System image file is "disk0: / asa821 - k8.bin.

  The configuration file to the startup was "startup-config '.

  api03 - in 29 days 4 hours

  Material: ASA5510, 512 MB RAM, Pentium 4 Celeron 1600 MHz processor

  Internal ATA Compact Flash, 256 MB

  BIOS Flash M50FW080 @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  Start firmware: CN1000-MC-BOOT - 2.00

  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04

  0: Ext: Ethernet0/0: the address is 0022.90fe.14c4, irq 9

  1: Ext: Ethernet0/1: the address is 0022.90fe.14c5, irq 9

  2: Ext: Ethernet0/2: the address is 0022.90fe.14c6, irq 9

  3: Ext: Ethernet0/3: the address is 0022.90fe.14c7, irq 9

  4: Ext: Management0/0: the address is 0022.90fe.14c3, irq 11

  5: Int: not used: irq 11

  6: Int: not used: irq 5

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  VPN SSL counterparts: 50

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  ================================

  My cisco contact told me: 'you must only ASA-AC-M-5510.

  can anyone confirm? I would like to be sure before buy you.

  Best regards

  Nicolas

  Yes, that is absolutely right.

  Since you already have the AnyConnect Premium license for 50 users (SSL VPN peers: 50)

  , then to connect mobile devices, all you need is the ASA-AC-M-5510.

• iPad, AnyConnect Mobile license question

  Hello

  I'll put up an ASA5505 allow a VPN with the certificate of the Client AnyConnect Secure Mobility Client (iPad)

  However I get a message 'not of License"return of the ASA on the iPad - Anyconnect.

  I remember reading that the ASA5505 came with two licenses. Or am I wrong?

  Thank you for your help

  Edward

  No, the mobile AnyConnect license allow only ASA accept the SSL of the mobile client connection.

  If you want to use the certificate as authentication, then you will need to purchase the certificate from a CA. OR, you can configure the ASA as the CA server and it can produce certificate for the client.

  Alternatively, if you require a certificate, such as authentication, then CA certificate is not necessary at all.

• Cisco Anyconnect/WebVPN license for ASA 5510

  Hello

  Someone could please check the licenses for ASA 5510 attachment and let me know. We currently have ASA 5510 with basic license. According to the table attached under VPN sessions, he mentions that "250 combined SESSIONS IPSec and WebVPN" and to "Max box of WebVPN Session" it is mentioned that 2nd meeting, exceeding that we must buy license optional webvpn. While we the 250 combined license for IPSec and webVPN. We must purchase additional anyconnect license to set up remote access for users who want to use the internal resources from outside the network. OrElse, we don't have to purchase license and can configure webvpn/anyconnect of existing combined license existing users basic ASA license? Waiting for your response. Thank you.

  You are welcome.

  1 Yes

  2 AnyConnect requires no Java, but it can he use when connecting to one AnyConnect SSL VPN client and launch the Web browser option start Java-based. There was a bug with the AnyConnect old versions had later who should have addresses. You also have the option to launch via IE and using ActiveX or simply throw AnyConnect directly - neither of these two methods require Java.

  Here is a document TAC on the Java questions if you want more details.

  Please take a moment to note the useful messages and mark your answers questions.

• Question about the license of Cisco's AnyConnect Mobile

  Hello

  I was reading on anycconnect, and I have a doubt,

  Do I need Cisco AnyConnect mobile license if I establish a vpn with the ASA windows desktop using the anyconnect client?.

  or these licenses are needed only when I use anyconnect on mobile platforms (iphone, ipad, Android)?

  hope someone clarify this point for me,

  Kind regards

  Juan Pablo Hidalgo

  It is useless to AnyConnect Mobile licenses for users who connect from a Windows desktop computer. These permits are only required for users with mobile platforms.

• Disable/remove Anyconnect mobile on SAA license?

  Hello

  Recently installed the Anyconnect mobile license to allow users of iPhone/iPad to connect to our SSL VPN from Cisco ASA. However, we want to turn this feature off. Is it possible to remove or disable this license or may not allow users to connect successfully to our Cisco ASA Apple iOS environment?

  BR!

  Patrik

  To remove the license, keep a copy of the current activation key you have. In this case, you want to reactivate the AnyConnect mobile license, then you can just reactivate using the current activation key.

  To actually remove the license activation key AnyConnect, send an email to [email protected] / * /. Include a copy of 'see the version' and advise them that you want to get an activation without the AnyConnect Mobile license key. Once they provide you with the new activation key (which excludes the AnyConnect Mobile license), you can enter this new key on the SAA.

• AnyConnect Mobile and Premium SSL free licenses

  Hello

  I currently have a pair of ASA5510 HA, if I understand the 2 free premium licenses can be used by the mobile client, as long as the ASA has the license for mobile clients?

  Can someone confirm that my interpretation is correct, or I have to buy a separate license to the premium one long with the license mobile client to enable this feature?

  Thanks for your time.

  Hello

  That's right! I did the same action on an ASA5505. In this case, you only need the anyconnect mobile license.

  Please mark answered for useful messages.

• Configure AnyConnect (Mobile) on ASA5505

  I found some tutorials and guides on how to Setup on an ASA5505 AnyConnect, but I wanted to check before to make sure I was going to the right direction.

  Installation program:

  I have a very simple installation and the basic objective.  I have currently just a laptop on my ASA5505 E0/1 and then the ASA is configured with a static IP connected to the Internet.  I have ASA correctly configured and you can browse the web through the laptop.

  I also AnyConnect and AnyConnect Mobile licenses as well.

  Objective:

  I want to configure on the ASA5505 AnyConnect and simply to establish a successful connection to a device mobile android running AnyConnect necessary software on the market.

  ===========

  There are plenty of guides for specifc set ups, but as described, I want to keep it is as simple as possible.

  It would be a good guide to complete this?

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080972e4f.shtml

  Also, I am more comfortable with the CLI. Is it easier to use the ASDM Assistant for this?

  Thanks in advance.

  Hello Joffroi,

  Please check the question as answered so future users can learn from your own resolution

  Kind regards

  Julio

• Cisco Anyconnect to mobile license?

  Dear all:

  Currently, we will activate cisco anyconnect for mobile (IPAD), our license is currently:

  Material: ASA5510, 1024 MB RAM, Pentium 4 Celeron 1599 MHz processor
  Internal ATA Compact Flash, 256 MB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 100
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  VPN SSL counterparts: 10
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5510 Security Plus license.

  as I read, so cisco anyconnect for mobile (IPAD), I need two licenses:

  AnyConnect Essentials and AnyConnect for Mobile, is that correct?

  If I want to activate this just for 10 users, I can do this? What are the available license I have to select by the user issues a year (or over a year?)

  can my final question get these licenses from Amazon, since google shows as these offers.

  Please help thanks

  I would go for the license more. It is much cheaper then the VPN-only-license and you can continue to use it when you change the ASA in a newer model.

• Cisco Anyconnect license users

  Hi all

  Here's my license information:

  Cisco Adaptive Security Appliance Software Version 5,0000 26
  Version 6.4 Device Manager (7)

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 150
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  Total of the VPN peers: 750
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5520 VPN Plus license

  I want to just increase the number of users Anyconnect. Just buy the (ASA5500-SSL-10) license or Anyconnect Essentials.

  In other words, the current license does not support more than 2 users if I buy ASA5500-SSL-10?

  How can I purchase a license and how do I install it in the asa?

  Thank you & your help is very appreciated.

  Omer

  OK, you can buy the option 1 or 2, but option 2, you just need the AnyConnect Premium license as ASA5500-SSL-10 is the AnyConnect Premium license.

  Here is more information about the license AnyConnect:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/data_sheet_c78-527494_ps10884_Products_Data_Sheet.html

  http://www.Cisco.com/en/us/partner/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80402e39.html

  ASA5520, it supports 750 concurrent users with license key AnyConnect.

  Essential AnyConnect is cheaper than the AnyConnect Premium license, however, I don't know how much it costs.

• ASA 5510 Anyconnect licenses with Cisco Anyconnect VPN IP phone

  Hi, hoping someone can shed some light on what I'm just more confused over trying to get by. Not sure if this goes in the section IP Telehpony or here...

  We have an ASA 5510 with the base license. We need to install IP phones to home teleworkers, and I understand there are Cisco IP phones that have built-in VPN clients to enable a tunnel to the central private network. IT seems that you can't use Anyconnect VPN to do this, and I am trying to establish what upgrade licenses, we must apply to the ASA, as both Anyconnect licenses that you get for free on the SAA is not enough.

  This is the phone that we seek;

  http://www.Cisco.com/en/us/prod/collateral/voicesw/ps6788/phones/ps10499/ps11005/data_sheet_c78-603725.html

  I want to know is the Anyconnect Essentials license will work with these IP phones?

  When I do a version of the show,

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  SSL VPN peers: 2

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  It shows "AnyConnect for Linksys phone: Disabled", it is the same for the Cisco IP phones? It is the kind of specific license, should I seek for Anyconnect on IP phones or will Essentials?

  Hi Leo,

  you will need 2 licenses: an Anyconnect Premium license and a permit «Anyconnect of Cisco VPN phone»

  ASA 8.2 and earlier license "for Cisco VPN Phone" has been named "for phone Linksys' it's the same.

  CFR. http://www.Cisco.com/en/us/docs/security/ASA/asa84/license/license_management/license.html#wp1487574

  HTH

  Herbert

• Cisco Anyconnect license upgrade Questions

  Hi all

  So, we currently have a pair of failover ASA 5515 - X running at one of our sites. This serves as a VPN gateway for our users. I am migrating users from the old Cisco VPN client to the newest Cisco Anyconnect client. I have work and installing anyconnect. Meanwhile, I discovered that process to take care of TLS 1.1 and using the Anyconnect client, you must use the most recent 4.0 Anyconnect client. To use this client, you must have something license called a "Anyconnect more" I think it was a recent change of return in 2014. We currently have the Anyconnect Essentials license installed on the ASA pair. I discovered that not only it a license upgrade available for upgrade Anyconnect positive of the battery, but the Anyconnect Plus license is subscription now. Boo Cisco. But that's another debate.

  I went ahead and reluctantly bought the upgrade license to upgrade Anyconnect positive of the battery. I am trying to understand however the affects of the installation of this license with respect to the current VPN functionality. Currently, we offer the following VPN options for our users:

  RA IPSEC (IKE v1via former customer)

  RA IPSEC (L2TP via the Windows client)

  SSL (Anyconnect 3.0)

  We also use tunneling IPSEC of P2P (IKEv1 PSK) between two sites to serve as a link of relief when our primary site-to-site link fails.

  If anyone knows what would be the effect on the current VPN functionality when installing my upgrade license? He turns off the older IPSEC IKEv1 feature? As I said I want to migrate to the newer platform users but still have need of the oldest customer work until this can be done. I have this in my current setup:

  WebVPN

  AnyConnect essentials

  What happens on this command when I apply the new license?

  Appreciate any help here. Thank you.

  Addition of the new activation key and the client configuration somehow 4.x will not affect the IKEv1, L2TP or VPN SSL. "AnyConnect essentials" rest a command active and valid

  It will give the ability to activate the advanced security features that require the 4.x client.