Cisco Anyconnect NAM module require a license purchase?

Similar Questions

• Cisco Anyconnect to mobile license?

  Dear all:

  Currently, we will activate cisco anyconnect for mobile (IPAD), our license is currently:

  Material: ASA5510, 1024 MB RAM, Pentium 4 Celeron 1599 MHz processor
  Internal ATA Compact Flash, 256 MB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 100
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  VPN SSL counterparts: 10
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5510 Security Plus license.

  as I read, so cisco anyconnect for mobile (IPAD), I need two licenses:

  AnyConnect Essentials and AnyConnect for Mobile, is that correct?

  If I want to activate this just for 10 users, I can do this? What are the available license I have to select by the user issues a year (or over a year?)

  can my final question get these licenses from Amazon, since google shows as these offers.

  Please help thanks

  I would go for the license more. It is much cheaper then the VPN-only-license and you can continue to use it when you change the ASA in a newer model.

• Record of equipment for the Cisco AnyConnect client NAM module

  Hi all

  Forgive me if this has been asked before or on the Cisco site somewhere (I could just find)

  Are there hardware specifications for the Cisco Anyconnect Network Access Manager module?

  Where can I find what wifi chipset is compatible with?

  Thanks in advance for your answer.

  Compatibility with the NAM module is based on the chipset not guest OS. The current operating system compatibility is listed here.

• Cisco Anyconnect license upgrade Questions

  Hi all

  So, we currently have a pair of failover ASA 5515 - X running at one of our sites. This serves as a VPN gateway for our users. I am migrating users from the old Cisco VPN client to the newest Cisco Anyconnect client. I have work and installing anyconnect. Meanwhile, I discovered that process to take care of TLS 1.1 and using the Anyconnect client, you must use the most recent 4.0 Anyconnect client. To use this client, you must have something license called a "Anyconnect more" I think it was a recent change of return in 2014. We currently have the Anyconnect Essentials license installed on the ASA pair. I discovered that not only it a license upgrade available for upgrade Anyconnect positive of the battery, but the Anyconnect Plus license is subscription now. Boo Cisco. But that's another debate.

  I went ahead and reluctantly bought the upgrade license to upgrade Anyconnect positive of the battery. I am trying to understand however the affects of the installation of this license with respect to the current VPN functionality. Currently, we offer the following VPN options for our users:

  RA IPSEC (IKE v1via former customer)

  RA IPSEC (L2TP via the Windows client)

  SSL (Anyconnect 3.0)

  We also use tunneling IPSEC of P2P (IKEv1 PSK) between two sites to serve as a link of relief when our primary site-to-site link fails.

  If anyone knows what would be the effect on the current VPN functionality when installing my upgrade license? He turns off the older IPSEC IKEv1 feature? As I said I want to migrate to the newer platform users but still have need of the oldest customer work until this can be done. I have this in my current setup:

  WebVPN

  AnyConnect essentials

  What happens on this command when I apply the new license?

  Appreciate any help here. Thank you.

  Addition of the new activation key and the client configuration somehow 4.x will not affect the IKEv1, L2TP or VPN SSL. "AnyConnect essentials" rest a command active and valid

  It will give the ability to activate the advanced security features that require the 4.x client.

• Cisco AnyConnect licenses

  Hello

  I know Cisco AnyConnect is free for iOS, Android, BlackBerry devices...

  But what about Windows & Linux?

  Thank you

  AnyConnect is not free for the devices, with the exception of two sessions, allowed by default without any license key.

  Here is the form:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/data_sheet_c78-527494.html

• Cisco Anyconnect Essentials License - What is it

  Hello community.

  I managed to install an ASA with Anyconnect. The Anyconnect client on my laptop works very well.

  But why now to buy a Cisco Anyconnect Essentials License, what exactly is this license?

  AnyConnect works fine without this license.

  But I can not connect with my IPhone with the Cisco Anyconnect for Iphone App. should I buy the Anyconnect for Mobile license and this license just for a single device or all devices. Because this license is really cheap. Cisco licenses normally are expensiv.

  Thank you and best regards patrick

  If you have not all AnyConnect Premium licenses, then you are limited to two simultaneous connections if you do not have the license of anyConnect Essentials. You are right, for i-devices (and Android...) you need the AnyConnect Mobile license.

  AnyConnect Essentials both AnyConnect Mobile are approved by ASA, not user connections. And AnyConnect Mobile needs AnyConnect essential or Preimium AnyConnect license must be activated.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• AnyConnect nam - how to hide the vpn components?

  Hello

  for a project we require the use of begging her to nam (eap chaining), but the customer does not want the vpn module is visible.

  the nam module is conditioned by the main anyconnect secure mobility client.

  is their a setting/option to hide the end user vpn dialog boxes?

  Greetings

  Install the anyconnect following basic component:

  msiexec/package anyconnect-win-ver-pre-deploy-k9.msi /norestart PRE_DEPLOY_DISABLE_VPN = 1 /lvx/passive *.

  And the VPN feature will be disabled, and then install NAM

  Starting from here:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html

• Vision Development Module run-time license?

  Hello everyone, I want to install an application to the University, I built on a laptop computer for use at another University. The application uses the driver NOR-IMAQdx for acquiring 2 USB, as well as various screw cameras since the vision development module. I know that there is no legal issue with Labview Run Time of distribution engine, but I would like to know where I stand with the side of the vision of the things. To install this application on the laptop I need to purchase the Vision Development Module Run Time License and software Acquisition of Vision for this laptop, if yes, how could I inculde it in installation? I noticed that the GUI installation gives me the possibility to include engines of execution and drivers, but I don't know how it works without the permit? Also, any idea on the cost? Any advice would be great, best regards, Joe

  Hey Joe,

  First the license covers the Module's development of Vision so should cover all the required drivers.

  You can download the runtime separately from here:

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/tech/lang/en/PG/1/SN/catnav:, n8:13, ssnav:sup.

  You will need the license to activate it on the installation.

  Whether if it is a better idea completely, it depends on how you want to distribute your application.

  I hope this helps!

• Cisco AnyConnect do IPsec?

  Hi guys

  I have a Cisco ASA5520 with software Version 8.2 (5) in place, most my users are Mac users and I am currently looking into Cisco AnyConnect in comparison using the VPN client.

  I have a few questions

  (1) Cisco AnyConnect does he use IPSec or is it soley based SSL VPN?

  (2) the license information I have in my ASA below, I understand that I can get max 750 vpn peers am however I have reason to say that this does not apply to Cisco AnyConnect peers? and with Cisco AnyConnect, I can only have 2 peers? Also, what are the options for mobility anyconnect for?

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 150

  Internal hosts: unlimited

  Failover: Active/active

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 2

  GTP/GPRS: disabled

  SSL VPN peers: 2

  Total of the VPN peers: 750

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect Cisco VPN phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  (3) when you try to configure Cisco Anyconnect on the SAA by using ASDM, I noticed that I needed to download AnyConnect client images, but when I did this by downloading the .dmg for mac machines file I got the error message 'not an image valid of the SVC'. Is it because I'm under 8.2?

  Your help is highly appreciated

  Concerning

  Mohamed

  Hi Mohammad,.

  I'll answer your questions one by one:

  1 cisco Anyconnect version 3.0 and above all support SSL and IPSECv2 connection. If you want the user to connect using the Anyconnect client IPSECv2 then it will consume the SSL license and not the IPsec license however if you use IPSECv2 for connections such as vpn site to site then it will consume normal IPSec VPN license.

  2. one.  SSL VPN peers: this license gives you information about the number of users that can connect using SSL protocol for example using the Anyconnect and web portal customer also known as the clientless VPN based on. I see here there are only 2 licenses so at any given time only 2 users can connect successfully because 750 is the total number of licenses available for the VPN on the SAA, 698 only will be available for IPSec connections.

  b. Anyconnect for mobile: this license is required whenever a user connects from a Pocket like device: Iphone, Ipad, tablets etc.

  c. Anyconnect of Cisco VPN phone: Cisco IP phones have the ability to connect to an ASA remote using the SSL protocol and to enable this feature, you should have this license is activated on the SAA.

  d. Anyconnect essentials: Anyconnect there are two licenses, one > Anyconnect Premium and b > Anyconnect Essentials. AnyConnect essentials is less expensive as premium per report Anyconnect license. This license is for those who don't use webvpn or VPN without client. When the license is activated, the user can connect only to the Anyconnect VPN client.

  3. I don't know what image you use on the ASA. Please try the image named as anyconnect-macosx-i386 - 2.5.2010 - k9.pkg.

  To apply the changes using the command line, put this image on disk0: and then type this command on the CLI.

  Image disk0:/anyconnect-macosx-i386-2.5.2010-k9.pkg SVC

  Let me know if it helps.

  Thank you

  Vishnu Sharma

• Setup for use with Cisco Anyconnect VPN IPsec

  So, I had trouble setting up VPN on our ASA 5510. I would use IPsec VPN so that we don't have to worry about licensing issues, but what I have read you can do with and always use Cisco Anyconnect. My knowledge on how to set up VPN especially in iOS version 8.4 is limited, so I've been using a combination of command line and ASDM.

  I am finally able to connect from a remote location, but once I log in, nothing else works. What I've read, you can use IPsec for client-to-lan connections. I use a pre-shared for this. Documentation is limited on what should happen after have connected you? Shouldn't be able to local access on the vpn connection computers? I'm trying to implement work. If I have VPN from home, should not be able to access all of the resources at work? According to me, because I used the command-line as ASDM I confused some of the configuration. In addition, I think that some of the default policies are confused me too. So I probably need a lot of help. Here is my current setup with the changed IP address and other things that are not related to deleted VPN.

  NOTE: We are still testing this ASA and is not in production.

  Any help you can give me is greatly appreciated.

  ASA Version 8.4 (2)

  !

  ASA host name

  domain.com domain name

  !

  interface Ethernet0/0

  nameif inside

  security-level 100

  the IP 192.168.0.1 255.255.255.0

  !

  interface Ethernet0/1

  nameif outside

  security-level 0

  IP 50.1.1.225 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  No nameif

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  boot system Disk0: / asa842 - k8.bin

  passive FTP mode

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  !

  permit same-security-traffic intra-interface

  !

  network of the NETWORK_OBJ_192.168.0.224_27 object

  subnet 192.168.0.224 255.255.255.224

  !

  object-group service VPN

  ESP service object

  the purpose of the tcp destination eq ssh service

  the purpose of the tcp destination eq https service

  the purpose of the service udp destination eq 443

  the destination eq isakmp udp service object

  !

  allowed IP extended ip access list a whole

  !

  mask 192.168.0.225 - 192.168.0.250 255.255.255.0 IP local pool VPNPool

  no failover

  failover time-out period - 1

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 645.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 non-proxy-arp-search to itinerary

  !

  the object of the LAN network

  NAT dynamic interface (indoor, outdoor)

  Access-group outside_in in external interface

  Route outside 0.0.0.0 0.0.0.0 50.1.1.250 1

  Sysopt noproxyarp inside

  Sysopt noproxyarp outdoors

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec ikev2 ipsec-proposal OF

  encryption protocol esp

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 proposal ipsec 3DES

  Esp 3des encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES

  Esp aes encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES192

  Protocol esp encryption aes-192

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 AES256 ipsec-proposal

  Protocol esp encryption aes-256

  Esp integrity sha - 1, md5 Protocol

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  registration auto

  name of the object CN = ASA

  Configure CRL

  crypto ca server

  Shutdown

  string encryption ca ASDM_TrustPoint0 certificates

  certificate d2c18c4e

  864886f7 0d06092a c18c4e30 308201f3 3082015c a0030201 d 020204 2 0d 010105

  0500303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609

  02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109

  3131 31303036 31393133 31365a 17 323131 30303331 39313331 0d 170d 6f6d301e

  365a303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609

  02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109

  6f6d3081 9f300d06 092 has 8648 86f70d01 01010500 03818d b 30818902-00-818100-2

  8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b

  37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c

  234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c 51782

  3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02

  03010001 300 d 0609 2a 864886 f70d0101 05050003 8181009d d2d4228d 381112a 1

  cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc

  18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6

  beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef

  af72e31f a1c4a892 d0acc618 888b53d1 9b 888669 70e398

  quit smoking

  IKEv2 crypto policy 1

  aes-256 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 10

  aes-192 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 20

  aes encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 30

  3des encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 40

  the Encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  Crypto ikev2 activate out of service the customer port 443

  Crypto ikev2 access remote trustpoint ASDM_TrustPoint0

  Crypto ikev1 allow outside

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 10

  Console timeout 0

  management-access inside

  SSL-trust outside ASDM_TrustPoint0 point

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

  AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2

  AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3

  profiles of AnyConnect VPN disk0: / devpn.xml

  AnyConnect enable

  tunnel-group-list activate

  internal VPN group policy

  attributes of VPN group policy

  value of server WINS 50.1.1.17 50.1.1.18

  value of 50.1.1.17 DNS server 50.1.1.18

  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client

  digitalextremes.com value by default-field

  WebVPN

  value of AnyConnect VPN type user profiles

  always-on-vpn-profile setting

  privilege of xxxxxxxxx encrypted password username administrator 15

  VPN1 xxxxxxxxx encrypted password username

  VPN Tunnel-group type remote access

  General-attributes of VPN Tunnel-group

  address (inside) VPNPool pool

  address pool VPNPool

  LOCAL authority-server-group

  Group Policy - by default-VPN

  VPN Tunnel-group webvpn-attributes

  enable VPN group-alias

  Group-tunnel VPN ipsec-attributes

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  class-map ips

  corresponds to the IP access list

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  Review the ip options

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  inspect the http

  class ips

  IPS inline help

  class class by default

  Statistical accounting of user

  I would recommend buy AnyConnect Essentials. The cost of the license is nominal - list of US $150 for the 5510. (piece number L-ASA-AC-E-5510 =)

  Meawwhile you can use the Cisco VPN client inherited with IKEv1 IPSec remote access VPN using profiles *.pcf.

  I believe you can also use the client Anyconnect client SSL or DTLS transport access remotely (non-IPsec) without having to buy the license Anyconnect Essentials for your ASA focus.

  As an aside, note that if you want to use AnyConnect Mobile (e.g. for iPhone, iPad, Android, Blackberry etc.clients) you will also get the additional license for it (L-ASA-AC-M-5510 =, also price US $150)

• Cisco AnyConnect VPN Client maintains reconnection

  Hello

  We have recently installed an ASA5505 and activated the VPN access.

  Two of my colleagues have no problems connecting to the VPN using Cisco AnyConnect VPN Client, but I do.

  I am still disconnected after a few seconds with the message:

  "A VPN reconnect gave rise to different configuration settings. VPN network interface is to be reset. Applications using the private network may be required to restart. »

  Cisco AnyConnect VPN Client Version 2.5.2019

  I work with Windows 7 but the same thing happens when I try to connect using my computer that is running Windows Vista.

  My colleagues also using Win7

  I also tried to disable the Windows Firewall.

  Any help would be appreciated.

  Best regards

  Peter

  TAC has been able to solve the problem.   For webvpn mtu changed default from 1406 to 1200.

  Not sure why 2 other ASAs we work very well otherwise though!

  WebVPN
  SVC mtu 1200

• CISCO ANYCONNECT VPN CISCO VPN CLIENT

  Hi, I was in the process of configuring cisco anyconnect vpn for ip phones to our local obtained the license for them either, the question that I get is that I already have remote configured cisco connect via the old cisco vpn client.

  now, if I activate the anyconnect ssl on the same outside the interface both can exist without conflict or maybe I need to migrate users to install the end customer for anyconnect system software to connect.

  I also need help with authentication of certification.

  concerning

  You can run both VPN at the same time without problems.

  However, you should try and migrate everyone to the latest technology Anyconnect SSL anyway.

• Hide the AnyConnect VPN AnyConnect GUI Module

  Dear team

  We are wired deployment 802. 1 x with Posture and that NAM is sufficient for us.

  but when installing AnyConnect vpn module must be installed and cannot be avoided, so VPN tab is also visible in the GUI AnyConnect interface,

  I need to disable the VPN tab from the interface chart anyconnect, because it is not used and confusing for end users.

  We have anyconnect-win-4.1.00028-pre-deploy-k9.

  We have a manual installation of AnyConnect on PC or Client Provisioning, we don't use MSI

  Please suggest 'VPN profile' to end users, which will hide this vpn module.

  Thank you

  Ahad

  Your situation is highlighted in the AnyConnect Administrator's Guide as well:

  When you configure the object Configuration AnyConnect to ISE, unchecking the VPN module under the AnyConnect Module selection does not disable VPN on the customer deployed/put in service. You must set VPNDisable_ServiceProfile.xml to disable the VPN AnyConnect GUI tile. VPNDisable_ServiceProfile.xml is on EAC with other files AnyConnect.

  The xml file, you need should be on the AnyConnect downloads page, but is not. There's a BugID noting that (CSCus26084). Work around the BugID does not work for me, but it could for you.

  The profile CAN be found in the msi file - if you open with 7-zip, you can find the file. She is short, so I'll just paste here:

       true  

• Cisco Anyconnect VPN client cannot establish a connection.

  Hello

  I am trying to connect to my server license from the University. I use 'Cisco Anyconnect VPN', but when it is goinh to initialize the connection it gives me the error "unable to establish a connection to the VPN client. At this point, the network of my Cisco anyconnect adapter gets disable automatically.

  I have no antivirus, and also it happens even when I turn off my firewall.

  Please help me solve this problem that prevents me from my all of the work!

  Thank you in advance.

  In addition to the advice of John I would also look at this document from Cisco for possible help...

  http://www.Cisco.com/image/gif/paws/100597/AnyConnect-VPN-Troubleshooting.PDF

  Cisco help as much as possible...

  http://www.Cisco.com/en/us/products/ps8411/tsd_products_support_series_home.html

  Its also possible you may have to run or reinstall the Cisco client in compatibility mode, if they do not have a version of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Otherwise contact your university network administrators may also be a viable option.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• Requirement of license adapter-FEX

  I have a customer who bought class C servers with maps VIC1225 and 5548UP Nexus switches, but just the basic license. I'm unable to establish the FEX adapter can be used or not given the specifications indicate that it embeds all FCoE.

  DOE anyone have a definitive answer for this?

  Hello Paul,

  FEX adapter requires no license.

  http://www.Cisco.com/en/us/prod/collateral/switches/ps9441/ps9670/guide_c07-690080.html

  ---------- snip ----------

  Check the requirements for the permit

  No A - FEX license is required for A - FEX to function.

  If you use the FC or FCoE, make sure that the appropriate license is installed.

  If you use the 3 layer card, be sure to install the BASE license.

  --------------------------

  If you plan to use VM - FEX, then license VMFEX is required

  Table 3 - Nexus 5000

  http://www.Cisco.com/en/us/docs/switches/Datacenter/SW/NX-OS/licensing/guide/b_Cisco_NX-OS_Licensing_Guide_chapter_01.html#con_24753

  Padma