Cisco APs bridge
Cisco always does support bridge APs. As long range once, I know that all the APs can be set to be a bridge, but what about the beach, it is a few meters.
Not interested in since speed mesh deployments can also be a disappointment on this type of especially large deployment.
Thank you :D
The 1300 and 1400 have been replaced by the 1530 and 1570.
Tags: Cisco Wireless
Similar Questions
-
That Cisco APs autonomous work as bridges?
I was wondering Cisco autonomous APs that can function as bridges wireless (station role root and non-root)? Particularly interested in the APs 1602E and 2602E. The documentation that I have watched so far is not expressly that it is / is not supported.
Yes, these model you can set up as a Non-Root/Root as long as you have a stand-alone image loaded. The time function is based on the code of the software.
Release notes available at below URL for details of the features of each version of the software in charge/no supported.
http://www.Cisco.com/en/us/products/ps12555/prod_release_notes_list.html
Here is a basic example of configuration of Root/Non-Root using different model AP, but it can help you get the config of base for these AP model, as well.
http://mrncciew.com/2013/11/09/wireless-bridge-with-EAP-fast/
HTH
Rasika
Pls note all useful responses *.
-
I have a few Cisco 1200 APs series and when I put these to broadcast the SSID even users get ephemeral could.
What is the problem?
What I have to do to put the SSID the same serv access points?
Thank you
Likely your APs higher tower to the other. Do a search on the forums for survey site and you meet several good conversations.
-
Unable to connect to eA4500 to Cisco in bridged mode
Hi, I put the ea4500 Bridged mode, and now I can't connect!
I know that I have to put the new ip address and when I do I choose conect directly, he asks me a password, I put the password, I click to connect, and then it's right there waiting...
What can I do? I have no wifi now! and it cannot deliver in DHCP mode.
Pablovi wrote:
Hi, I put the ea4500 Bridged mode, and now I can't connect!
I know that I have to put the new ip address and when I do I choose conect directly, he asks me a password, I put the password, I click to connect, and then it's right there waiting...
What can I do? I have no wifi now! and it cannot deliver in DHCP mode.
In Bridge mode, verify that you assign a STATIC IP address to the router first. In this way, with a specific set of IP, manage your settings to be a problem. If a powercycle does not let you return to the (at page of the router), do a RESET. Reconfigure your router settings and do not forget to assign a STATIC IP to your EA4500 address.
-
How to set address static IP for cisco APS to the controller via command line
Hello
in our project it 208 APS registered in a WISN-1 controller
How do I assign a static ip address to this Aps via command line in a controller 4404
Thanks to the Internet, it takes more time to assign the static ip address
You don't mention what version of the code, you are on but on 7.0:
ap static IP config activate
You can also add
ap static IP config add domain
ap static IP config add nameserver
-
Cisco's aPs do not broadcast complete device as part of Lighthouse name!
Hi all
We have more than 800 Cisco Aironet 1220, 1230, 1242 APs deployed in our society. I use AirMagnet to check the signal and do some job sniffers. What I've found, is that these Cisco APs do not send full device name. Say my name of the device's gw-cr-lap1242-rp4. what I can see of AirMagnet is only gw-cr-lap1242-r, the last two letters of p4 are cut. I also did the decoding. The length of the name of the HA and includes 30 bytes which is able to retain the full name, but since packets, AP sends only the name of gw-cr-lap1242-r and then fill the rest with the garbage room. It's embarrassing because we have gw-cr-lap1242-rp1,gw-cr-lap1242-rp2,... gw-cr-lap1242-rp32, etc.. I compare the MAC to locate the access point.
Please see the pictures attached.
Well, I understand it is a pain, but maybe you select 'L' for lwapp and 'A' for autonomous? you earn 2 characters.
Why you can set up the long names: because it is also the host of the AP name, as it appears in the list of AP like this, because it is syslogged correctly.
It is the extension of the CCX containing the name of the AP has a limit of 15 characters.
I have no idea about the feasibility of this limit has increased. Perhaps a request for improvement of product with your account team could answer this question. I just noticed made :-)
Kind regards
Nicolas
-
Registration with WLC Cisco 2600 TOWER
Hello
We bought new devices Cisco WLC 2500 and 2600 AP.
We used the Cisco APs in stand-alone mode and I was pretty familiar with these nodes of AP. but I do not know how to set up and attach it to my WLC with AP LWAP mode im totally new. I installed the DHCP server in my network and my 2600 TOWER can take ip from dhcp server, but he does not have part of my WLC, I know not why, and I couldn't find a good intruction on internet.
Can any send my step by step guide on how to join Cisco AP a WLC please? I have a lot of experience on the networking side but not on the wireless world please help
Another thing, my country Code is not included in the Cisco WLC, what should I do? My country is of the Afghanistan, but its code is not exist in WLC version 7.0
The AP we are installing in Afghanistan. but Afghanistan is not included on the list of regularity domains , that is why i chose US during the setup process.
And where the WLC is going to be installed? If it's in the same country, then change the country to the same regulatory domain with your access point or AP will never join the controller.
-
Service pack and security newsletter
Cisco Unity is ok with to apply the service pack or the service published by Microsoft bulletin. This isn't like CCM which must apply only Cisco released. is it not? Thank you
Lower in the policy is detailed:
Microsoft provides monthly updates for Windows Server 2003, Windows 2000 Server, Exchange 2003, Exchange 2000, SQL Server 2000, MSDE 2000, Internet Explorer and IIS. These updates (known under various names, including cumulative security patch fixes, security updates, patches and fixes critical updates) are limited to the changes that fix specific problems. They do not include general defect fixes or new features. All these Microsoft updates are certified by Cisco since the day when Microsoft releases. We recommend that you evaluate Microsoft Updates-ITMU according to your server-software-maintenance policy to determine when to update the Cisco Unity or Cisco Unity Bridge server. If your company does not have a policy, we recommend that Microsoft updates apply to the server as they become available. Cisco TAC supports a Cisco Unity system on which these updates have been installed.
Basically you can install patches - no SPs - as soon as Microsoft releases them.
Thank you
Keith
-
Prevent client to client communication
You are looking for a way to set up a wireless network and have the ability to deny customer access to customer between hosts on the access point.
Hi Chris,
Just to add a note to the great info Scott (5 points for that one Scott :)) This is possible in both autonomous AP;
Activation and deactivation of the secure package transfer Public
Public Forwarding for packages of Secure (PSPF) prevents client devices associated to a file share access point inadvertently or communicate with other client devices associated to the access point. It provides Internet access to devices client without providing other features of a LAN. This feature is useful for public wireless networks such as those installed in airports or on college campuses.
--------------------------------------------------------------------------------
Note to prevent any communication between the clients associated with various points of access, you must configure the ports protected on the switch to which your access points are connected. See "Configuring protected Ports" for instructions on configuring the protected ports.
--------------------------------------------------------------------------------
To enable and disable the PSPF by using CLI commands on your access point, you use Bridge groups. You will find a detailed explanation of the bridge groups and instructions for their implementation in this document:
•Cisco IOS bridging and IBM Networking Configuration Guide, release 12.2. Click on this link to access the Configuration of a Transparent bridging section: http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm_c/bcfpart1/bcftb.htm
You can also activate and deactivate the PSPF by using the web browser interface. The PSPF setting is on the Radio settings pages.
PSPF is disabled by default. Beginning in privileged EXEC mode follow these steps to activate PSPF:
Purpose of command
Step 1
Configure the terminal
Enter global configuration mode.
Step 2
dot11radio interface {0 | 1}
Interface for the radio interface configuration mode. 2.4 GHz radio is radio 0, and 5 GHz radio is radio 1.
Step 3
bridge - a group protected by port
Select the PSPF.
Step 4
end
Return to privileged mode.
Step 5
copy running-config startup-config
(Optional) Save your entries in the configuration file.
No form of the command to disable the PSPF.
I hope this helps!
Rob
-
Hello world!
Is it possible for the skis 'AP' to have ultiple SSID, if yes, then it must affect the performance as "ap" should send the tag for each ssid then pass the traffic of each ssid.
Could someone explain this please?
Thank you very much!
Yes, Cisco APs now take up to 16 SSIDS. And you're right to be beacons for each of them, so you should be smart about how you use. Just use the minimum of what you need!
-
Hi all, I'm going to have bad configure anyconnect VPN on my router. I'm CCENT pre level and especially followed a tutorial, but feel I'm missing something simple here.
It's a fairly simple installation on a Cisco No. 2851 - faces of a single interface my LAN 192.168.1.0/24, the other has a public IP address.
I created a network 192.168.2.0/24 VPN users, mainly to have phones Android connection of their mobile phone networks, and have access to the servers/security cameras/etc by using their local IP addresses. When my phone connects, it gets an IP address and is connected, but is not communicating with my LAN correctly.
The VPN client can ping 192.168.1.254 (the router's LAN IP) - but not the other devices on the network. However, the devices on my LAN can ping the VPN clients to their address 192.168.2.x.
Here's a copy of my current config, I have reorganized some elements with #s. Also pasted my ip sh road under him. Do not forget that I am a novice, please forgive the hack :)
Router (config) #do sh run
Building configuration...Current configuration: 5782 bytes
!
! Last modification of the configuration at 02:24:24 UTC Sat Sep 5 2015 by #.
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
host name #.
!
boot-start-marker
boot-end-marker
!
!
enable secret $5 1$ 0 #.
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login local sslvpn
AAA authorization exec default local
!
!
!
!
!
AAA - the id of the joint session
!
!
dot11 syslog
no ip source route
!
!
IP cef
!
DHCP excluded-address 192.168.1.200 IP 192.168.1.254
DHCP excluded-address 192.168.1.1 IP 192.168.1.10
!
pool of dhcp IP LAN
network 192.168.1.0 255.255.255.0
Server DNS 192.168.1.254
by default-router 192.168.1.254
!
!
IP domain name # '.com'
host IP Switch 192.168.1.253
8.8.8.8 IP name-server
block connection-for 2000 tent 4 within 60
connection access silencer-class SSH_MGMT
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TRUSTPOINT-MY
enrollment selfsigned
Serial number
name of the object CN = 117-certificate
crl revocation checking
rsakeypair my-rsa-keys
!
!
MY-TRUSTPOINT crypto pki certificate chain
certificate self-signed 01
###################################################
quit smoking
!
!
license udi pid CISCO2851 sn FTX1026A54Y
# 5 secret username $1$ yv # E9.
# 5 secret username $1$ X0nL ###kO.
!
redundancy
!
!
property intellectual ssh version 2
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
LAN description
IP 192.168.1.254 255.255.255.0
IP nat inside
No virtual-reassembly in ip
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
WAN description
No dhcp client ip asks tftp-server-address
No dhcp ip client application-domain name
DHCP IP address
IP access-group ACL-WAN_INTERFACE in
no ip redirection
no ip proxy-arp
NAT outside IP
No virtual-reassembly in ip
automatic duplex
automatic speed
No cdp enable
!
interface Serial0/0/0
no ip address
Shutdown
!
interface virtual-Template1
!
local IP 192.168.2.100 WEBVPN-POOL pool 192.168.2.110
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
The dns server IP
IP nat inside source list INSIDE_NAT_ADDRESSES interface GigabitEthernet0/1 overload
!
IP access-list standard INSIDE_NAT_ADDRESSES
permit 192.168.1.0 0.0.0.255
permit 192.168.2.0 0.0.0.255
IP access-list standard SSH_MGMT
permit 192.168.1.0 0.0.0.255
permit 207.210.0.0 0.0.255.255
!
IP extended ACL-WAN_INTERFACE access list
deny udp any any eq snmp
TCP refuse any any eq field
TCP refuse any any eq echo
TCP refuse any any day eq
TCP refuse any any eq chargen
TCP refuse any any eq telnet
TCP refuse any any eq finger
deny udp any any eq field
deny ip 127.0.0.0 0.255.255.255 everything
deny ip 192.168.0.0 0.0.255.255 everything
permit any any eq 443 tcp
allow an ip
!
exploitation forest esm config
NLS RESP-timeout 1
CPD cr id 1
!
!
!
!
!
!
!
control plan
!
!
!
!
profile MGCP default
!
!
!
!
!
access controller
Shutdown
!
!
!
Line con 0
exec-timeout 0 0
Synchronous recording
line to 0
exec-timeout 0 0
Synchronous recording
line vty 0 4
exec-timeout 0 0
Synchronous recording
entry ssh transport
line vty 5 15
exec-timeout 0 0
Synchronous recording
entry ssh transport
!
Scheduler allocate 20000 1000
!
Gateway Gateway-WebVPN-Cisco WebVPN
IP interface GigabitEthernet0/1 port 443
SSL rc4 - md5 encryption
SSL trustpoint TRUSTPOINT-MY
development
!
WebVPN install svc flash:/webvpn/anyconnect-linux-3.1.03103-k9.pkg sequence 1
!
WebVPN context Cisco WebVPN
title "Firewall.cx WebVPN - powered by Cisco"
SSL authentication check all
!
list of URLS "rewrite".
!
ACL "ssl - acl.
ip permit 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
Licensing ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
!
login message "Cisco Secure WebVPN"
!
webvpnpolicy political group
functions required svc
filter tunnel ssl - acl
SVC-pool of addresses 'WEBVPN-POOL' netmask 255.255.255.0
generate a new key SVC new-tunnel method
SVC split include 192.168.1.0 255.255.255.0
Group Policy - by default-webvpnpolicy
AAA authentication list sslvpn
Gateway Cisco WebVPN bridge
Max-users 5
development
!
endGateway of last resort is #. ###. ###. # network 0.0.0.0
S * 0.0.0.0/0 [254/0] via #. ###. ###.1
(###ISP))) is divided into subnets, subnets 1
S (# #ISP #) [254/0] via (# publicgateway #) GigabitEthernet0/1
###.###.0.0/16 is variably divided into subnets, 2 subnets, 2 masks
C ###.###.###.0/23 is directly connected, GigabitEthernet0/1
The ###.###.###.###/32 is directly connected, GigabitEthernet0/1
192.168.1.0/24 is variably divided into subnets, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, GigabitEthernet0/0
The 192.168.1.254/32 is directly connected, GigabitEthernet0/0
192.168.2.0/32 is divided into subnets, subnets 1
S 192.168.2.100 [0/0] via 0.0.0.0, Virtual Network1can you try to disable the FW on your internal lan hosts and then try and ping from users of vpn client
-
Hello
I have the following configuration:
Several autonomous Cisco APs, authenticating PEAP with assignment VLAN based on the RADIUS and WPA2-AES encryption. Is it possible to offer fast between my APs roaming so that the whole process of re-authentication with radius server does not occur?
CCKM is supported in my case (with vlan dynamic assignment)?
Hello
When you use security in IOS APs you WDS to achieve fast roaming.
Basically, there is a main access point (AP WDS) that controls the RRM and authentications. All the other APs are the infrastructure APs and to report that WDS.
This allows to centralize the associated users so that when a user goes, there no need of is re - authenticate and homelessness is fast.
You can find more information here:
HTH,
Tiago--
If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
-
Unable to get Air-AP1141N-A-K9 to Apple devices
We just bought 2 Cisco Air-AP1141N-A-K9 stand-alone Cisco APs to broadcast a unique SSID throughout our office two floors. Everything seems to work fine, except that the MacBooks, iPhones, iPads and even Android cannot pick up the new SSID. Any ideas why this is? We can manually enter the SSID, but we must do this every time.
Most of the settings are the default, with the only major change being using the Cipher and TKIP encryption Mode.
SSID is defined by the following:
Methods accepted: open authentication
EAP authentication servers: use default values
MAC authentication servers: use default values
Key management: mandatory
Enable WPA
Select the MFP customer on this SSID
Advertise Cabilities expanded this SSID
Advertise Wireless Provisioning Services (WPS) Support
Advertise this SSID as a secondary program
Lighthouse game mode: single BSSIDThe software is c1140-k9w7 - tar.124 - 21A .JY
Any help would be appreciated, thanks!
Hi Todd,
From the configurations below... I do not see the SSID broadcast configurations... Here is the command to do that...
dot11 ssid PROJECTWIFI
authentication open
authentication key-management wpa
wpa-psk ascii 7 120907001B1909082F3837
information-element ssidl advertisement wps
his comments-mode under the SSID...
dot11 ssid PROJECTWIFI
authentication open
Guest-mode
authentication key-management wpa
wpa-psk ascii 7 120907001B1909082F3837
information-element ssidl advertisement wpsPlease do the changes and let me know if that answered your question..
Regards
Surendra
===
Please dont forget to rate the usefull posts which answered your qustion or was helpful
-
WebVPN cannot access internal network on 2821
Hello, I'm trying to configure WebVPN to my internal network. The client is connected to the router, but I can't ping from my internal network. Also, I've lost ping between hosts on the internal network. I can ping only gateway (192.168.162.0)
IOS Version 15.1 (4) M9
webvpn-pool IP local pool 192.168.162.212 192.168.162.218
IP nat inside source list 1 interface GigabitEthernet0/0 overload
access-list 1 permit 192.168.162.0 0.0.0.255
Gateway Gateway-WebVPN-Cisco WebVPN
address IP X.X.X.X port 1025
SSL rc4 - md5 encryption
SSL trustpoint trustpoint-my
development
!
WebVPN context Cisco WebVPN
Easy VPN title. "
SSL authentication check all
!
list of URLS "rewrite".
!
ACL "ssl - acl.
allow IP 192.168.162.0 255.255.255.0 192.168.162.0 255.255.255.0
!
login message "Cisco Secure WebVPN"
!
webvpnpolicy political group
functions compatible svc
functions required svc
filter tunnel ssl - acl
SVC-pool of addresses 'webvpn-pool' netmask 255.255.255.0
generate a new key SVC new-tunnel method
SVC split include 192.168.162.0 255.255.255.0
Group Policy - by default-webvpnpolicy
AAA authentication list sslvpn
Gateway Cisco WebVPN bridge
Max-users 2
development
!Hello
I saw the VPN configuration:
webvpnpolicy political group
functions compatible svc
functions required svc
filter tunnel ssl - acl
SVC-pool of addresses 'webvpn-pool' netmask 255.255.255.0
generate a new key SVC new-tunnel method
SVC split include 192.168.162.0 255.255.255.0
Group Policy - by default-webvpnpolicy
AAA authentication list sslvpn
Gateway Cisco WebVPN bridge
Max-users 2
developmentACL "ssl - acl.
allow IP 192.168.162.0 255.255.255.0 192.168.162.0 255.255.255.0webvpn-pool IP local pool 192.168.162.212 192.168.162.218
IP nat inside source list 1 interface GigabitEthernet0/0 overload
access-list 1 permit 192.168.162.0 0.0.0.255
I recommend the following:
1 use a local IP pool with a different range that is used in the internal network (routing wise issues)
2. removed the VPN filter, it is completely useless, since it's the same for which the (Split tunnel is):
webvpnpolicy political group
no tunnel ssl - acl filter
3 use an ACL on the NAT and create the NAT exemption for the network to the IP pool inside local outdoors:
NAT extended IP access list
deny ip 192.168.162.0 0.0.0.255 XXXX XXXXX--> network IP of the IP pool
Licensing ip 192.168.0.0 0.0.0.255 any
IOverload nat inside source list NAT interface GigabitEthernet0/0 p
What are the appropriate changes, I recommend you to apply.
Please don't forget to rate and score as correct the helpful post!
David Castro,
-
Cisco 3850 - Direct Connect APs
Can you not - APs to connect directly to a 3850. For example, if you had several offices in a branch of the site and your MC 3850 was in the Bay of server and had 2960 s in other offices. Could you connect your APs to 2960 switch and make them joined MC 3850?
I read that must be connected directly to the 3850, however it supports flexconnect APs?
If you'd be grateful if someone could shed some light.
Thank you
3850 will not support flexconnect. You must also connect the AP to 3850 (no transitional interrrupteurs as 2960).
Refer to this Q & A to answer your two questions
http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps12686/qa_c67-722110.html
HTH
Rasika
Maybe you are looking for
-
After the last update my iPad 2 Air turns off my wifi se option any ideas on how to solve this problem
-
Satelltie P100-387: Question about preinstaled on HARD drive software
I want to know what software preinstalled on new P100-387 on the HARD drive.There are 3 files which I don't know exactly what's in it and if it is important to be on C:\ CMPNENTS I386 VALUEADD (I want to know if I can remove it or put it on DVD). And
-
Change the target of the library Variable shared by program
I have a project in real time with the code that runs on a host PC and a cRIO who communicate using a library of shared on the cRIO variables. I am hosting the variables on the cRIO because who has worked much better than the accommodation on the hos
-
HP Compaq dc7100 Small Form Factor Windows 7 32 bit
-
Deactivated (?) desktop computer - how to re - activate
Windows xp (background) desktop has turned white with a message on the action being a measure of protection. I tried "clicking" on a box for "reactivation" of the desktop. The popup box that offers a choice of 'Yes' or 'No' about a script error. B