Cisco ASA 5500 Series end of life

Hello

I noticed that all 5500 series (5510,5520,5540,5550,5580) ASAs are all end-of-life announced in March 2013. However, I don't see ASA 5505 on the list. Can anyone confirm that 5505 EOL has not announced?

http://www.Cisco.com/c/en/us/support/security/ASA-5505-Adaptive-Security...

Thanks in advance

The 5505 is not yet announced EOS/EOL, but the announcement can * t be extreme as 5506-X will be available soon (well, I hope... ;-)).

Tags: Cisco Security

Similar Questions

  • Cisco ASA 5500 Series 4-Port GE SSM

    Currently, we have 2 asa 5510 firewall and need to add the

    Cisco ASA 5500 Series 4 - Port GE SSM extension module. Can it be added when the device is turned on and running or the firewall must be turned off to install the plug-in?

    Hello

    You could try to ask this question of the team of firewall, as this page from the community for the physical security and video surveillance.  The team of firewall is located here:

    https://supportforums.Cisco.com/community/NetPro/security/firewall

  • Back on the cisco ASA 5500 series and PIX 500 series

    Hello

    I fund a site www http://www.searchsecurity.de/themenkanaele/plattformsicherheit/schwachstellenmanagement/allgemein/articles/106752/ (only in German). I have read that it is possible to make a denial of service on cisco PIX 500 series and series 5500 ASA, when the TTL value is enabled.

    How can I check that? or solve the problem?

    I thank you,

    Mary

    What version of the code you run the Pix or ASA. Refer to the "Products affected" section for more information on versions and the products concerned. This should point you in the right direction.

    Also, listed in the URL is bypasses and fixed Versions that you may want to check.

    Kind regards

    Arul

  • Cisco ASA 5500 CSC-SSM-20 Series

    How many subscribers maximum, sessions, licenses are allowed using Cisco ASA 5500 Series CSC-SSM-20 on ASA5540 module

    Use the following command 'See - activation key' to get maximum subscribers, sessions, details County licenses.

  • Step how to configure ASA 5500 Series Security Services Module-10 (model: ASA-SSM-10)

    Dear support,

    I need to configure Security Services Module-10 (model: ASA-SSM-10) on my ASA 5510 firewall. Could you provide configuration step and how to connect to the module?

    Here is the information on the module

    ciscoasa (config) # sh Details of module 1
    The details of the Service module, please wait...
    ASA 5500 Series Security Services Module-10
    Model: ASA-SSM-10
    Hardware version: 1.0
    Serial number: JAF1115066U
    Firmware version: 1.0 (11) 2
    Software version: 1.0000 E1
    MAC address range: 001a.e268.5aa9 to 001a.e268.5aa9
    App name: IPS
    App status. : to the top
    App status. / / Desc:
    App version: 1.0000 E1
    Data of aircraft status: Up
    Status: to the top
    Mgmt IP addr: 133.1.9.144
    Web to MGMT ports: 443
    Mgmt TLS enabled: true

    your help is very appreciate.

    Thank you

    Best regards

    Hi Sothengse,

    Please find the samlpe on AIP SSM module configurations. You can go through this to begin with.

    http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

    https://www.YouTube.com/watch?v=FgYU5ZXwk4g

    Concerning

    Knockaert

  • Configuration of the Cisco ACS 5.3 AnyConnect VPN and management of a Cisco ASA 5500.

    We have configured a Cisco ASA 5505 as a VPN endpoint for one of our user groups.  It works, but it works too well.

    We have a group called XXX we need to have access to the Cisco AnyConnect Client.  We have selected this group of our Active Directory and added to our ACS configuration.  We've also added a group called YYY that will manage the ASA. However, this group has no need to access the VPN.

    We added XXX movies for the elements of the policy of access to the network-> authorization profiles.  We also have a profile of YYY.

    She continues to knock on our default Service rule that says allow all.

    We have also created a default network access rule. for this.

    I am at a loss.  I'm sure I missed a checkbox or something.

    Any help would be really appreciated.

    Dwane

    We use Protocol Management GANYMEDE ASA and Ray for VPN access?

    For administration, you must change the device by default admin access strategy and create a permission policy. Even by the way, you can change the network access by default for vpn access and create a respective policy for that too.

    On the SAA, you must configure Ganymede and Ray both as a server group.

    For the administration, you can set Ganymede as an external authentication under orders aaa Server

    AAA-server protocol Ganymede GANYMEDE +.

    Console HTTP authentication AAA GANYMEDE

    Console Telnet AAA authentication RADIUS LOCAL

    authentication AAA ssh console LOCAL GANYMEDE

    Console to enable AAA authentication RADIUS LOCAL

    For VPN, you must set the authentication radius under the tunnel-group.

    I hope this helps.

    Kind regards

    Jousset

    The rate of useful messages-

  • CISCO ADAPTIVE SECURITY APPLIANCES ASA 5500 SERIES

    Hello

    I'm doing a comparison of the above with other offers from different providers.

    Can someone tell me if the firewall feature of this device actually runs the full version of PIX OS 7.0.

    Flipping through the manual, it does not mention PPTP with MPPE or L2TP with IPSEC support while I'm reasonably sure these two would be supported in a pix running OS 7.0

    Thank you

    Paddy

    The PIX and ASA are running the same code, no difference. The reason why you don't see PPTP and L2TP/IPSec mentioned is that these functions have been removed from code of v7.0 PIX / ASA, mainly because they used very little and they need space for the more 50 new features that have been added. It is detailed here:

    http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_70/70_rn/pix_70rn.htm#wp119169

    The ASA actually gives you some extra with 7.0 features that works on a PIX is not, like WebVPN (SSL VPN), load balancing VPN and support the onboard SSM (IDS/IPS).

  • site to site vpn with ASA 5500 series SSL?

    We have routers DLink DIR - 130 5505 s ASA and PIXen, all work well with our PIX 515E, we need to replace.

    We also have Internet satellite in two places. High latency makes IPsec VPN to DLinks on these very slow sites.

    We were informed by HughesNet that a SSL VPN will mitigate some of the problems of latency.

    However, we cannot use a VPN client for the biometric timeclocks in these places, the clocks need static IP addresses and are more or less "dumb terminals".

    The machine of series 5000 ASA VPN site to site similar to OpenVPN or only the most comment client-server type SSL VPN connections?

    Thank you, Tom

    Hi Thomas,

    The SSL VPN on ASAs feature is a client/server relationship where the remote computer can connect without client (browser) or clientbased (AnyConnect) to the ASA.

    Federico.

  • ASA 5500 series as a customer VPN SSL

    Hello.

    ASA 5510 (or other products) usable as SSL VPN site to site VPN client?

    Version 8.4.2 asdm 6.4.9

    On the other end have certificate authentication and authorization through LDAP credentials

    SSL on the SAA isn't only for remote access. For the Site to Site, you must use IPSec.

  • The ACE IPS Cisco and Cisco ASA AIP - SSM (IPS)

    Is there a difference between the features offered by the Cisco ACE IPS and Cisco ASA AIP - SSM (IPS) devices?

    Can we do without Cisco ASA AIP - SSM (IPS) of 'only' configuration/implementation Cisco ACE IPS.

    Cisco AVS/ACE emphasis on commissioning and to secure web-based applications. IP addresses do not focus on just the web applications and trying to get the multiple layers of the OSI stack. Consider the IPS as a general practitioner and the ACE/AVS as an eye surgeon, or something :)

    Here is the response from Cisco itself:

    http://www.Cisco.com/en/us/prod/collateral/modules/ps2706/ps6906/prod_qas0900aecd8045867c_ps6492_Products_Q_and_A_Item.html

    Q: how is Cisco AVS Firewall application differs from an intrusion prevention system (IPS)?

    A. IPSs are solid solutions of protection against targeted attacks of known vulnerabilities in major platforms such as Windows, Solaris, Apache or Microsoft Internet Information Services (IIS). Cisco AVS excels to protect against targeted attacks Web sites or enterprise applications. These applications can be built custom internal applications or software vendor. Signatures and security patches are generally not available for these types of applications, and building these security levels in each application, it would be almost impossible.

    Q: how is Cisco AVS Firewall application differs by a network firewall?

    A. The Cisco AVS 3120 and Firewall network such as the Firewall of Cisco PIX® and Cisco ASA 5500 Series Adaptive Security appliances are complementary products. The application Cisco AVS Firewall secures Web applications; excellent network in the network security firewall. and the Cisco AVS provides defense in depth for Web applications.

    Firewall network apply policy networks, IP addresses and ports; they have a wide range of application for many different protocols layer features. The firewall can and will be deployed in many locations, including the edge, edge of the enterprise network, branch, etc. Cisco AVS imposed the policy on data HTTP as URL, headers and parameters. Cisco AVS is deployed in the data center in front of Web applications

    Concerning

    Farrukh

  • ASA 5500 model

    Hello

    Can what ASA 5500 model I use to replace my PIX515E companies with 6 interfaces.

    Hello o.oresotu,

    Looks like the Pix 515E Flyway is the ASA 5510.

    Take a look at the following links.

    Cisco ASA 5500 Series Migration quick look

    http://www.Cisco.com/application/PDF/en/us/guest/products/ps6120/c1031/cdccont_0900aecd80322caa.PDF

    Licenses for features and specifications

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_guide_chapter09186a00806b1c1c.html

    Hope that helps! If Yes, please rate.

    Thank you

  • Cisco ASA 5508 with firepower of speeds VPN

    Nice day

    Can someone tell me which is better performance Anyconnect VPN or Cisco VPN?, I intend to use a VPN for my users to connect and transfer files to a shared folder speed does.

    Also, I don't want my clients to access a Web page or portal to get the client I can install the VPN client on the client labtop.

    Is it possible to do this as well?

    Hello

    The shared screenshot has the correct option is selected.

    Yes anyconnect supports IPSEC thus:

    https://supportforums.Cisco.com/discussion/11501221/Cisco-AnyConnect-DOE...

    http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

    Please visit this link for the plug ASA 5508-firepower:

    http://www.Cisco.com/c/en/us/products/collateral/security/ASA-5500-serie...

    Kind regards

    Aditya

    Please evaluate the useful messages and mark the correct answers.

  • ASA 5500 x new anyconnect VPN license structure

    I wonder if anyone can give me some insight on the new ASA VPN (SSL VPN) structure of license.  Currently, I have anyconnect premium license installed on the ASA 5500 series but want to buy the same type of license for x ASA 5500 series.  I understand the premium license is required for SSL VPN and webvpn.  Can someone find out if the premium anyconnect and anyconnect essentials license has been replaced by the Cisco Anyconnect Apex licence?

    The new AnyConnect Apex maps old Premium licenses. They are now focused on the term (1, 3-5 years) and have been approved by a single user (regardless of the number of devices) vs. concurrent users on the old regime.

    Apex (or the old premium) is required for clientless SSL VPN. Regular-based on the SSL VPN client AnyConnect requires no Apex but can be done by using only more licenses.

    The new AnyConnect Plus is the old Essentials plus mobile licenses. There is an option of perpetual and based on the duration.

    By single user licensing is a terms and conditions / EULA stuff and not enforced by technical means at the moment.

  • RV082 VPN Cisco ASA

    I have seen discussions on people who make reliable VPN connections to a RV082 at a remote site to a Cisco ASA 5500 security series device in a Home Office.  Can we get a FAQ/document displays the settings on both sides so that it works?  Even if mark you it as "This is a configuration not supported, use at your own discretion", it would be better than nothing.  Each Cisco, Linksys device or otherwise, must be able to communicate with other devices, especially on a standard IPSec protocols.

    Please see attached tech note on the definition of the tunnel VPN RVxx Linksys with Cisco
  • Select Cisco ASA to replace Palo Alto PA 500

    Hello world

    Pls suggest a Cisco ASA (equivalent or superior) 5500 series to replace the PA500. Thank you

    Palo Alto PA500

    • Firewall of 250 Mbit/s throughput (App - ID1active)
    • 100 Mbps threat prevention throughput
    • 50 VPN IPSec Mbps throughput
    • 64 000 max sessions
    • 7 500 new sessions per second
    • Tunnels/tunnel VPN IPSec 250 interfaces
    • 100 users, SSL VPN
    • 3 virtual routers
    • Virtual systems (basic/max) N/A
    • 20 security zones
    • 1 000 maximum policies

    Hi you can opt for the Asa 5510 or Asa 5520 two of them correspond to your needs. Here is a link to their characteristics http://www.cisco.com/c/en/us/products/collateral/security/asa-5500-serie... Aditya cordially

Maybe you are looking for

  • Satellite L305D fails to recover with recovery disks

    It gets to the point where I guess it's almost over... It's the first time I had to recover my computer, but I had to replace the hard drive that is entered into the computer once already by Toshiba. But in the end he comes up with the ERROR: 10-FA12

  • Need my license key of Windows 8

    Hi I have a HP Pavillion Slimline PC and hard drive crashed - model S/N - mxu30302p3 - s5-1414 - I need to get the license key of Windows 8, so I can re - build the PC. I don't see on the PC itself.

  • How to count the time exactly?

    I tried to count the time using a VI like the one attached. It's that's not couting correctly. There is a possible reason, I have observed. The computer isn't able to handle the VI as soon as necessary. I thought about this because, when in edit mode

  • E-mail in Windows Live 2011 problems

    I've recently updated my Windows Mail in Vista to Windows Live Mail 2011, but not all of my emails originate by can someone help please?

  • Install the Runtime Error for ATK Hotkey driver drivers for SL500 on Windows 7

    Hello I recently installed Windows 7 on a new hard drive and had a few devices not recognized in Device Manager that ThinkVantage Toolbox also could not solve. Now I am manually install these device drivers and have a few problems. (1) the shortcut k