Cisco Clean Access Update website and Firewall Port required

Hello

I was wondering if anyone might know the site that would be to use the clean Access Manager to put as well as the required firewall port. This is due to a firewall in place. From reading, do not know if it uses another website besides as the next http://www.perfigo.com/clean_machine_1/version-se.txt on port 80.

Thank you.

Hello

For CAM checks and update the rules, this is the only site required.

HTH,

Faisal

--

If you find this article useful, please note so that others can easily find the answer

Tags: Cisco Security

Similar Questions

  • difference between cisco NAC agent and cisco Clean Access Agent

    Hi all

    If anyone has the idea on different between cisco NAC agent and cisco Clean Access Agent, please let us know your ideas.

    Thank you

    In 4.6, the agent has been revised and is now called the NAC agent.  Previous versions were called the clean access Agent.  So roughly, 4.5 and 4.1.3.2 agent are own access agents, and agents 4.6.x and 4.7.x are called NAC agents.

    Some of the changes are moving a lot of the agent configuration in an XML file, redesign of the GUI, adding a service portion (of the sort that the agent of heel is no longer necessary) and the best journaling agent.

  • not able to access Microsoft website and antivirus

    I now use another computer. My own machine running windows xp sp3. The Internet works except that I can't access Microsoft Internet site and anti-virus. In safe mode, the internet works perfectly with full site access. There is no any firewall or anti-virus installed software, so it is not blocked by the firewall. I did the Bitdender anti-scan antivirus, spybot, Malwarebyte s, Ad-aware, FixBlast + FixMydoom of scan of Symantec and CCleaner. But the problem is still there. I searched well internet, but none of the works of the solutions. Microsoft, anyone help me solve this problem please?

    If this computer has been on the Internet without an antivirus and a firewall installed, backup your data and do a clean install of Windows. Despite your scans, the symptoms you describe are caused by an infection. You can have a rootkit that is not visible to Windows programs. MS - MVP - Elephant Boy computers - don't panic!

  • CISCO CLEAN ACCESS AGENT ALWAYS OPENS EVEN ALREADY AUTHENTICATED

    Hello

    Just wonder why officer own access always opens even already authenticated. Please how can I eliminate multiple pop-ups?

    Thank you and best regards,

    Edwin

    Edwin,

    This occurs because of a misconfiguration and is not normal. Give more details about your configuration, a diagram of network if possible.

    Faisal

  • Does anyone know if the version of Cisco Clean Access Server supports the 4.1 (8) SHA - 256 signed SSL certificates?

    Yes, I know they are very old servers and technically, we should move away from CASES in total. But unfortunately, it's an environment I inherited, and I am now dealing with issues.  Because of the requirement to move away from sha - 1 signed certificates that I need to replace my existing certs, certs signature sha-256.  But before I do that I would like to know if anyone knows if CASE version 4.1 (8) supports SHA - 256 certificates?  I did check the release notes, but there is no mention of the supported versions of SHA, etc..  I tried TACS but no joy there either, etc..

    Hello Rafael,.

    SHA - 2 signed the certificate of support was added in 4.7.2 for SCS and CAM.

    We have filed a default document to have it documented in the release notes.
    CSCud99946    Note of support for the NAC should say we support certs of SHA - 2

    Kind regards

    Jousset

  • Since an update to Adobe Flash Player (10.3?), I had many problems to access web sites and play 'videos' on them.

    Since an update to Adobe Flash Player (10.3?), who apparently is not 64-bit capable, I had many problems to access the websites and "videos" by playing on their. There is also a special site that charge but the screen displays a full blank page. What can or should I do? The adobe site indicates that the new application does not support 64-bit, but it doesn't seem to be a solution for it or the option of returning to the previous flash drive that was no problem.

    Hello

    Read this interesting information and use the 32-bit IE browser:

    'http://kb2.adobe.com/cps/191/tn_19166.html '.

    Troubleshoot installation of Flash Player for Windows

    http://kb2.Adobe.com/CPS/141/tn_14157.html

    Uninstall Flash by using the uninstall program Flash Adobe link above.

    Flash is sometimes corrupted.

    http://get.Adobe.com/flashplayer/?promoid=BUIGP

    Reinstall Flash, after 1st unchecking / unchecking the Google Toolbar download option there.

    http://pietschsoft.com/post/2006/12/Vista-experience-update-Windows-Vista-x64-runs-32-bit-Internet-Explorer-by-default.aspx

    The Internet Explorer shortcut in the Quick Launch toolbar, and in the x 64 Vista Start menu will run the 32-bit version of Internet Explorer by default. Why run the 32-bit version if IE on the 64-bit version of Vista?

    There are actually two shortcuts for Internet Explorer in the "Programs" menu Why two and what is the difference?

    This is the title of each and they run exe:

    Internet Explorer
    "C:\Program Files (x 86) \Internet.

    Internet Explorer (64-bit)
    "C:\Program may Explorer\iexplore.exe.

    One runs IE in the "Program Files (x 86)" folder, this is the 32-bit version. The second is the 64-bit version.

    http://kb2.Adobe.com/CPS/000/6b3af6c9.html

    Trial of Adobe flash 64-bit

    http://www.ehow.com/how_4670030_adobe-Flash-bit-browsers.html

    Read the above article on the 64-bit browsers

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/babaa5f8-FF06-4EA2-aef6-a9416d65f981

    Read the above information about Flash and 64-bit browser by PA bear MVP"

  • Access VPN ASA and cisco ISE Admin

    Hello

    Currently I'm deployment anyconnect VPN Solution for my client on ASA 9.2 (3). We use the ISE 1.3 to authenticate remote users.

    In the policy stipulates the conditions, I put the condition as below.

    Policy name: Anyconnect

    Condition: DEVICE: Device Type Device Type #All Device Types #Dial - in access EQUALS AND
    RADIUS: NAS-Port-Type is equal to virtual

    I'm authenticating users against the AD.

    I am also restrict users based on group membership in authorization policies by using the OU attributes.

    This works as expected for remote users.

    We also use the ISE to authenticate administrators to connect to the firewall. Now what happens is, Cisco ASA valid also against policy, administrators and their default name Anyconnect.

    Now the question is, how to set up different political requirement for access network admin and users the same Firewall VPN.

    Any suggestions on this would be a great help.

    See you soon,.

    Sri

    You can get some ideas from this article of mine:

    http://ltlnetworker.WordPress.com/2014/08/31/using-Cisco-ISE-as-a-generic-RADIUS-server/

  • Error code: 80072EFE (cannot access Microsoft Update Website)

    Hi I am getting Code 80072EFE Windows Update has encountered an error unknown.
    In addition, can't access Microsoft Update Website

    Any attempt to enter the Microsoft Update Web page online will result in error/connection has been reset.

    I read several threads here that speak of this problem and we have tried a lot of recommended solutions, but nothing helped.

    Tried using Malwarebytes' Anti-Malware and removed about 150 + infected files (by RootKit I think).

    but this error persists.

    Please help with suggestions.

    Thank you

    Hi ReMiNz,

    1. who is the edition of Windows 7?
    2. don't you make changes before the show?

    Try the steps in the following article and check the result.
    See You can encounter errors related to the connection of temporary when you use Windows Update

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

    Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

    Jim Eckland

    Jim,
    In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

    Clean boot your PC, and then run Windows Update.

    Reset the Windows Update components

    Perform operations of KB883825

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I am trying to update my windows xp and I can access updates or down; MS ADO

    I had to reinstall my OS and now I need to update to windows xp.  I can't access updating the automatic updates and I get a server error when you try to install service packs.  I can't do any technical medium of MS and I keep going in circles trying to find answers on the community page.  Help!

    It's no wonder that my employer has chosen to do away with windows computers and goes with Mac.  I use only basic windows desktop until I got back my MAC since its update of migration.

    Hi MiguelinaKrier,

    ·         What is the full error message?

    ·         The issue is limited to a particular update?

    ·         Updates (KB numbers) you are trying to install?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click restart to restart the computer.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

  • Cannot access internet, check HTTP, FTP and HTTPS port settings

    Using Windows XP, cannot access internet.  The problems notified that Windows cannot connect Internet using HTTP HTTPS or FTP.  Said that it's probably caused by the settings of the firewall.  Adiveses to check the settings of the firewall for HTTP (80) port, the HTTPS port (443) and FTP port (21).  Did not inform how to do this.

    Any suggestion would be appreciated.

    Hello

    · What version of internet explore are you working on?

    · Were there any changes made on the computer before the show?

    I suggest you try the steps listed in the links below: how to manually open ports in Internet Connection Firewall in Windows XP: http://support.microsoft.com/kb/308127

    "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer: http://support.microsoft.com/kb/956196

    Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

  • Ports required by the update ThinkVantage Retriever (TVUR) and ThinkVantage System Update (TVSU)

    I need some documetnation which details the ports that are required for the update of ThinkVantage Retriever (TVUR), ThinkVantage System Update (TVSU) and ThinkVantage ThinInstaller work properly.

    Bonus: Would be great a list of guests they link to.

    In this business environment, we do not use a proxy server, but to put the other technologies to protect our potential end-users perpetrators and themselves.  Of course, it has its drawbacks.

    One of those disadvantages is that TVSU and TVUR do not work properly (queries fail, can not download updates).  If we take this home machine run TVSU and TVUR, it works fine.  Clearly its an internal matter which should be corrected.

    However, while our security and network management team is probably pleased to add the exclsusions, they will want to know what ports are used and perhaps what specific external resources we cannot reach.

    It's probably docmented somewhere?

    Hello

    Extent of Lenovo knowledgebase article https://support.lenovo.com/us/en/documents/ht002421 :

    • Make sure that ports 443 and 80 are open on your personal firewall or company.

    but do not mention the host names or IP address ranges, you may need to make a capture of packets, similar to netflow, etc. to determine the servers at the other end.

    Kind regards

    Aryeh Goretsky

  • Clean access - manual update of Nessus Plugin

    Hello

    The last nessus.org 2.2 plugin file is greater than the seemed allowed download size via the clean Access Manager Web Interface.

    When I manually download the plugins through the CAM, I get the following error of the CAM.

    Result: Error: could not download content file length error (15954372 > 10485760)

    You don't seem to be able to remove some of the pluggins.tar.gz file for some reason nessus plugins any (I think it is write-protected), so I can't delete files to archive and download a smaller.

    How will I be able to download Nessus Plugins on the CAM? Is there another way that anyone knows? Surely, we should be able to do so through the prompt as well.

    Thank you

    I finally installed this way, but in a slightly different way. I used the tool to update-nessus-plugins to download and install the plugins in the directory. They appear still not in the GUI until I took an individual and any plugin using the GUI. Then all the plugins appeared in the user interface and can be used.

  • Cannot access the Windows Update site and install updates

    Original title: 2 problems 1 when he goes to win the update, I get, can not display the page. 2 if I'm going in a different direction and I get search updates, scanning (encountered a problem can not display the page) comes up and on the opportunity of the page crashes.

    I did fix it, I disabled all firewall internet security and and also listed win update to a trusted site.

    Hi trski,

    I recommend you to check for possible malware program.

    1 restart the computer using safe mode with networking. If you have a Type of Internet connection wireless, have a wired internet connection. To restart in Mode safe mode with networking:
    a. press the restart.
    (b) at the moment you press the restart button, keep tapping F8 until that Advanced Boot Options appears.
    c. Select Mode safe mode with networking
    2. open the Web browser to explore and go to http://safety.live.com.
    3 scan the OneCare Safety Scanner full Service.
    4. take note of the items that are detected, but cannot be deleted, as appropriate. Get back to me with the names of the infections that cannot be removed, if necessary.
    5. after removing the infection (if any), start in Normal Mode by restarting just the normal computer like you do it.

    Run Windows Update again, and get back to us with your findings.

    If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Unable to access updates for windows xp home edition (sp3) via "Fix - it", Windows Update or Microsoft Update and Windows Update

    Hello

    I have download a new download "Fix - it"; all the convenience of work with the exception of "Windows Update".  Also I went through self-help suggestions in "go-microsoft", but nothing helped.  I also tried the "cmd" method (i.e.: start, run, cmd and then copy and paste each .dll for windows update); 1 a .dll could not be found, and two other 2 couldn't register.  After Windows Update represented existing 'cmd' method, I then, well my system recognized the appropriate software update and allowed me to press the 'Express' butotn to an update of high priority for installation (e.g.: Cumulative Security Update for Windows XP...) Sorry, but I forgot the KB #), unfortunately, he could not install, then I ran Windows Update again and pressed the 'Custom' button and three 3 software update optional appeared, as well as an XP update.  Once again, all the selected custom updates has not installed.  I am therefore at a disadvantage as to how I can access necessary security updates for my computer and would appreciate contact me promptly to address this urgent problem.  Thank you much in advance - arldarl

    Hello Tommy.

    Thanks for sharing the information above to remedy my Windows Update and please accept my apologies for my being too general with my question.

    After many hours of running the programs above, SuperAntivirus found 1 an Adware and 55 Tracking Cookies; MalwareBytes found 1 1 that a horse of Troy, and EsET found Trojan horse more!  My computer is vulnerable, so 'thank you '... I would never have known to load/run these particular l, and nor would I knew I had these TAPI problems in my computer.

    After several attempts of installing/re-installing 'Fix - it' (i.e.: deletion of multiple copies associated with my Microsoft Online ID), I was unable to make progress, so I ended up check my Services and found BITS to be set up as 'Network' instead of 'Local '.  I made this change, Windows Update, and the Cumulative Update has began to download - finally!

    I suspect that any of your suggestions, and my little trick got Windows Update to work?

    Thanks a lot a lot - arldarl

Maybe you are looking for

  • How to use the video port with Vista on Qosmio G30

    Im running windows vista Ultimate edition.How to use the monitor in port?

  • How to reformat without the recovery disks

    Computer my uncle is badly infected, and we want to bring a guy from computer to have it cleaned.  The problem is, my uncle had a lot of personal or sensitive information on the machine, all over the place, and it is extremely difficult to locate all

  • Try to connect a DS to an E3000

    I found most of the info I need, now I just need to know what is my WEP key. Where can I find it in my settings?

  • HP Deskjet Ink Advantage 3525... lack of settings.

    Hello. HP Deskjet Ink Advantage 3525 , I bought recently and I'm misssing some printing features such as color, impression of brightness, print preview and similar adjustments. I have only two tabs in settings page layout and paper settings. I tried

  • Problem of Smartphones blackBerry sync with Outlook 2007.

    I was sync my "BOLD" with none of the problems of all founded. When I tried it sync today, the program stops saying that there is a mistake as soon as he tries to synchronize the calendar. Someone had this problem today? I have a BlackBerry Bold, Out