Cisco configuration professional
Hi I downloaded configuration cisco professional, but did not find any installer in the zip file I downloaded from cisco. Zip files included only html files.
I have read the information on the professional page of cisco configuration file I downloaded should be an installer for example: MSI or *.exe in my mind. Where is he?
Thank you
Kind regards
Totardo
Most likely, you have downloaded the 'express' package that is intended for installation on the device itself. the office installation package is known as 'pro' and the current version is 2.8.
Looking for the file name "cisco-config-pro-k9-pkg-2_8-en.zip".
It can be found here:
https://software.Cisco.com/download/release.html?mdfid=281795035&SOFTWAR...
Tags: Cisco Support
Similar Questions
-
Disable or wiping "Cisco Configuration Professional Express."
Hello
We use a new Cisco1921-SEC/K9 comes with a new IOS (15.2 (4) M1). To use the feature of SSL - VPN from outside we activeted 'secure http server. I tried to check the security of the inside (we use ZBF) and it appeared a "Cisco Configuration Professional Express" Web page with Java "and so on" - brrr - who designed this thing?
Now us whant to disable or wiping the "Cisco Configuration Professional Express." Subtract the *.pkg and *.cfg flash with charging has not worked.
How can we remove this 'Cisco Configuration Professional Express', because we do not like ist! I can't find a flag to config or something in the flash...
Grüße
Steve
Steve,
You can follow the procedure in the CCP Admin Guide (here) for the withdrawal of CCP.
TL; DR.? Well (2 c seems to be specific to an AP installation):
To uninstall the Cisco CP Express Admin View of the router flash memory, perform the following steps:
Step 1 On the router, go to the directory in which Cisco CP Express Admin View files using this command:
router# cd flash:
Step 2 Use the delete command to remove all Cisco CP Express Admin display the files and folders of the router flash memory.
Note Ensure that you delete the files extracted from the ccpexpress27Admin.tar file and the ccpExpress_ap_express - security.shtml.gz.
a. remove the home.shtml file:
router# delete /force /recursive home.shtml
b. delete the ccpexp folder:
router# delete /force /recursive flash:ccpexp
c. remove the file ccpExpress_ap_express - security.shtml.gz in the folder ap802-xxxxx-xx.xxx-xxx.xxx/html/level/15/ of the AGP flash memory:
ap# delete flash:/ap802-ccw7-mx.124-25d.JAX/html/level/15/ccpExpress_ap_express-security.shtml.gz
-
Can Cisco Configuration Professional to use the IPS feature?
Dear Expert
Hello.
Could you tell me about Cisco Configuration Professional.
I would try the IOS - IPS on Cisco2901-SEC/K9.
I was looking to the ORC on Cisco Configuration Professional.
Cisco2901-SEC/K9 does not support SDM.
But the Cisco2901-SEC/K9 support the Cisco Configuration Professional.
Can you Cisco Configuration professional to use IPS as SDM function?
Kind regards
Takuro.
Hello
Yes, you can configure Cisco Configuration Professional IOS IPS.
CCP has a wizard to guide you through the process, there is a link for it:
I hope this helps you.
-------
Mashal
-
Cisco Configuration Professional install and usage?
HI can someone help. I am studying for CCNA Security and want to install the CCP. I tried to download from cisco.com, file extensions are not supported, so I'm lost as to how to install it and play with the software. Based on Windows. Thank you
Make sure you download "cisco-config-pro-k9-pkg-2_6-en.zip". It is a zip file with the included Installer if just unzip and run the executable file.
Files with "exp" in the file names are the Express version for installation on routers and not intended for installation of PC.
-
Option not available in Configuration Professional v2 performance routing
I get a router Cisco 2901 put in place and tries to load balancing/link aggregation and/or failover for my double WAN connections. Being new Cisco's IOS software, I'd rather do my setup using the specialist graphic Configuration interface. If I understand correctly, the option of routing Performance will help me set up but I don't have this option, available in professional Configuration; any ideas? I downloaded the latest version of CP (version 2) I think; I've been reviewing on the article often referenced on this feature to: Cisco Routing of Performance and reviewed the Cisco Feature Navigator available on http://www.cisco.com/go/cfn for my release IOS; the feature I'm looking for is documented in a flash to http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/scrcst/PfR/CCPPFR.swf (screenshot below) presentation:
A summary of key results of the command show version 'IOS' on this router are:
Cisco IOS software, software C2900 (C2900-UNIVERSALK9-M), Version 15.0 (1) M, VERSION of the SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc.
Last update Wed, 30-Sep-09 05:30 by prod_rel_team
ROM: System Bootstrap, Version 15.0 M1 (1r), VERSION of the SOFTWARE (fc1) BPRouter availability is 5 days, 23 hours, 43 minutes system returned to ROM by system restarted at 11:34:47 PCTime Wed Dec 23 2009 system image file is "flash0:c2900-universalk9-mz.» Spa. 150 - 1.M.bin.
Cisco CISCO2901/K9 (revision 1.0) with 483328 K/K 40960 bytes of memory.
Card processor ID FTX134981A3
2 FastEthernet interfaces
2 gigabit Ethernet interfaces
1 module of virtual private network (VPN)
Configuration of DRAM is wide with parity 64-bit capable.
255K bytes of non-volatile configuration memory.
254464K bytes of system CompactFlash ATA 0 (read/write)
License info:
License IDU:
-------------------------------------------------
Device SN # PID
-------------------------------------------------
* 0 FTX134981A3 CISCO2901/K9
Technology for the Module package license information: "c2900.
----------------------------------------------------------------
Technology-technology-current package Type next reboot technology
-----------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
Security securityk9 Permanent securityk9 data uc no no no register None None None Configuration is 0 x 2102
Thank you for your question. This community is for Cisco Small Business products, and your question is referring to a product Cisco Elite/Classic. Please post your question in the Cisco NetPro forums located here: https://supportforums.cisco.com/community/netpro?view=overview this forum is subject to the subject matter experts on Cisco Elite/Classic products that may be able to answer your question.
Kind regards
Cindy Toy
Cisco Small Business Support Community Manager
-
Query VLANS with Cisco configuration example
List of expensive,
I was wondering if there is an error on the Cisco documentation below.
The schema and configuration shows the LWAPs attached to the switch on vlan 5, but the trunk to the WLC is pruning vlan 5.
If this is true, how the LWAPP LWAPs with the WLC to talk?
The proposed config is a few lines of the diagram below.
Thanks for any comments.
http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a0080665cdf.shtml#DIA
Chris.
Management of the AP is on vlan 5, so there's no reason to be vlan 5 allowed on the trunk for the wlc. Only the interfaces configured on the WLC should be allowed.
Management, AP-Manager and all dynamic interfaces... service-port can be included, but should not be routable.
Hope that explains it... If not let me know :)
-
515E Cisco configuration problem
I made a simple configuration for a Cisco 515E on Oct, this year. A small office use it for surfing the net.
Now, they want to set up a web site for themselves. So, I did a static nat for their Web server:
public static x.x.29.198 (Interior, exterior) 192.168.1.1 mask subnet 255.255.255.255 0 0
But then, I found a problem. Although I can ping any Web site successfully for the internal Lan, but I don't ping IP global to the web server (x.x.29.198), and I can't ping external IP address of the firewall (x.x.29.194) too.
On the other hand, I ping the x.x.29.198 (or 194) from the Internet and I can ping the 192.168.1.1 of the internal Lan.The web service also seems very good.
There can someone tell me how to solve this problem? Thank you.
Hello
This isn't a problem and everything works fine. Since the internal local area network, you won't be able to ping the global address of the web server or the PIX outside interface. The ASA PIX won't will not allow this.
Hope that helps.
-
Cisco Configuration Assistant?
Hello guys,.
I am trying to download a CCA software but you should know what type of account, I need to download?
Partner, comments or other?
We have a vanuty URL: www.cisco.com/go/configassist
The most recent is 2.2 (4).
You should be able to get as a registered partner, I think...
Steve
Sales of small businesses
-
Directory of video Jabber Cisco Configuration problem
Hello!
We have a facility with
VCS 7.2, TMS 13.2.2. and a lot of video of jabber users. TMSPE uses for commissioning and etc., TMS and VCS are configured to import users from the AD:
VCS in AD domain, AD srvices is configured, default Zone is configured as check credentials, sub-area by default is configured as authenticated. MOVI users are configured and imported into TMS of AD - I can see them in the management of the telephone directory, Movi version 4.5, in configuration model [email protected] / * /(asb.by = local to the sip domain) is configured. With movi users group has access and permission to search for the phonebbok. The problem is that when a movi user trying to search another user - failure of the attempt to find: he gets nothing. However it is the contact searcing is connected with movi and appeared in the devices put into service. For example the EX60 ep is configured with directory - it has a full ist of users (contacts) imported from AD and created locallly.
Hello
Can you check the TMSPE diagnoses in TMS and see if the phone book button are red.
Also check the source directory activity in TMS and see if you see errors.
Make sure that you perform a full synchronization with the TMS of VCS (Configuration tab, click on "Synchronize complete now")
Also on the VCS you can actually check if the entries in the directory exists in the VCS and the users have access to them.
Status--> Application--> TMSPE--> directories
Let me know if you see errors about directories in MSDS.
/ Magnus
-
SG 300-Cisco Configuration Assistant
Hi guys, I'm unable to connect a SG 300 alternate with CCA v3.2. I have already connected the switch with CCA, but I see nothing in my CCA façade and topological.
Here's the view my view front once I have connected the switch:
Could be he you guys please help me to find out what is the problem?
Thank you very much!
Hello Michel,
Have you been able to connect with CCA before? In addition, is the switch on the latest firmware?
-
I'm losing configuration when I turned off my Cisco 857 router
I bought the new router Cisco 857 of the shop. Router must have been used before as I couln can't go inside with name of user and password default cisco/cisco.
Well I followed digital and reset the password for the user name and password. Now I have finally connected to Cisco CP express on my IE browser.
I discovered that someone was using a router in the shop that's why I countries: ' t log in to him in the first place. In any case the problem is that when I changed my configuration and applies the settings he remembers until I turned off. When I turn on again he remembers all the parameters of this shop.
He returned everything back: IP address, former account to level 15 and password - just like after the password reset.
I tried again and he again lost the settings. So I found instructions:
http://www.Cisco.com/en/us/products/HW/routers/ps233/products_tech_note09186a00800a65a5.shtml
I followed it and changed once again all the settings of the router. My settings are still lost after the power on/off. I noticed that when I do everything first bit it shows
0x2102 not 0x2142 like they think that is password reset mode.
Here is my output from Hyper Terminal:
=============================
Cisco#enable
Cisco#show start
Using 3359 out of 131072 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Cisco
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 $1$hpKF$Rc1tl6r45J8iHG7EN5jSk.
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-3185909327
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3185909327
revocation-check none
rsakeypair TP-self-signed-3185909327
!
!
crypto pki certificate chain TP-self-signed-3185909327
certificate self-signed 01 nvram:IOS-Self-Sig#5.cer
dot11 syslog
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
!
!
ip cef
no ip domain lookup
ip domain name molinary.com
!
!
!
username admin privilege 15 secret 5 $1$jD3j$r6ROikgGsIlcMTGjkxFQ6.
username username privilege 15 password 0 password
!
!
archive
log config
hidekeys
!
!
!
!
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
description $ES_WAN$
ip nat outside
ip virtual-reassembly
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$
ip address 10.10.10.1 255.255.255.248
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface Dialer0
ip address dhcp
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname [email protected]/* */
ppp chap password 0 netgear01
ppp pap sent-username [email protected]/* */ password 0 netgear01
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 1 interface ATM0.1 overload
!
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 10.10.10.0 0.0.0.7
dialer-list 1 protocol ip permit
no cdp run
!
control-plane
!
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username
privilege 15 secret 0 Replace
and with the username and password you want to use.
-----------------------------------------------------------------------
^C
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#
Cisco#show version
Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(15)T12, R
ELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 22-Jan-10 14:46 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Cisco uptime is 20 minutes
System returned to ROM by power-on
System image file is "flash:c850-advsecurityk9-mz.124-15.T12.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 857 (MPC8272) processor (revision 0x400) with 59392K/6144K bytes of memory
.
Processor board ID FCZ140792J5
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ATM interface
128K bytes of non-volatile configuration memory.
20480K bytes of processor board System flash (Intel Strataflash)
Configuration register is 0x2102
Cisco#
Cisco#
Cisco#
Cisco#end
Translating "end"
% Unknown command or computer name, or unable to find computer address
Cisco#reload
Proceed with reload? [confirm]
*Mar 1 01:19:27.786: %SYS-5-RELOAD: Reload requested by username on console. R
eload Reason: Reload Command.
System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
C850 series (Board ID: 2-149) platform with 65536 Kbytes of main memory
Booting flash:/c850-advsecurityk9-mz.124-15.T12.bin
Self decompressing the image : ############################################## [O
K]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(15)T12, R
ELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 22-Jan-10 14:46 by prod_rel_team
Image text-base: 0x8002007C, data-base: 0x814E7240
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 857 (MPC8272) processor (revision 0x400) with 59392K/6144K bytes of memory
.
Processor board ID FCZ140792J5
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ATM interface
128K bytes of non-volatile configuration memory.
20480K bytes of processor board System flash (Intel Strataflash)
no ip dhcp use vrf connected
^
% Invalid input detected at '^' marker.
SETUP: new interface NVI0 placed in "shutdown" state
Press RETURN to get started!
*Mar 1 00:00:03.952: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State change
d to: Initialized
*Mar 1 00:00:03.960: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State change
d to: Enabled
*Mar 1 00:00:07.244: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:08.413: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:00:08.821: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 01:19:27.072: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state t
o up
*Mar 1 01:19:27.352: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(15)T12, R
ELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 22-Jan-10 14:46 by prod_rel_team
*Mar 1 01:19:27.352: %SNMP-5-COLDSTART: SNMP agent on host Cisco is undergoing
a cold start
*Mar 1 01:19:27.436: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 1 01:19:27.436: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 1 01:19:27.540: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, chan
ged state to down
*Mar 1 01:19:28.072: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Ac
cess1, changed state to up
*Mar 1 01:19:28.484: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, cha
nged state to up
*Mar 1 01:19:28.484: %LINK-5-CHANGED: Interface ATM0, changed state to administ
ratively down
*Mar 1 01:19:28.848: %LINK-5-CHANGED: Interface NVI0, changed state to administ
ratively down
*Mar 1 01:19:28.932: %LINK-3-UPDOWN: Interface FastEthernet3, changed state to
up
*Mar 1 01:19:28.936: %LINK-3-UPDOWN: Interface FastEthernet2, changed state to
up
*Mar 1 01:19:28.940: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to
up
*Mar 1 01:19:29.484: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, chan
ged state to down
*Mar 1 01:19:29.932: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et3, changed state to down
*Mar 1 01:19:29.936: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et2, changed state to down
*Mar 1 01:19:29.940: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et1, changed state to down
*Mar 1 01:19:29.948: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to upAuthorized access only!
===========================================
Please help me as I am stuck and can't go any further....
Hi Dragan,
After you run the wizard Cisco CP Express, it should save the configuration set to update the flash on the router. However, in your case, it seems this is not the case. Therefore:
- Configure the device via Cisco CP Express--> do NOT turn off after that
- Connect to the router with Hyperterminal. Enter the configuration mode by typing:
Enable
When you are prompted for a password to put in. The line should now be router #.now type:
write memoryYou see errors? Otherwise, type:
See the startup-configCheck the output matches the configuration you've tried. If Yes, then you are good to go. If this is not the case, let us know all the errors you received.
-
I am trying to configure a cisco 850 router but I can't do a ping to the outside world of Vlan1.
show running-config
Looks followCurrent configuration : 5563 bytes!! Last configuration change at 15:33:02 UTC Sat Aug 13 2016 by ciscoversion 15.2no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname fw2.myfw.tld!boot-start-markerboot-end-marker!!logging buffered 51200 warnings!aaa new-model!!!!!!!aaa session-id commonwan mode ethernet!!!ip dhcp excluded-address 10.10.10.1ip dhcp excluded-address 192.168.1.1ip dhcp excluded-address 129.x.x.5!ip dhcp pool ccp-pool import all network 192.168.1.0 255.255.255.0 dns-server 8.8.8.8 8.8.4.4 default-router 192.168.1.1 lease 0 2! ! ! ip domain name mydomain.tldip name-server 8.8.8.8ip name-server 8.8.4.4ip cef no ipv6 cef! ! ! ! crypto pki trustpoint TP-self-signed-1017650632 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-1017650632 revocation-check none rsakeypair TP-self-signed-1017650632! ! crypto pki certificate chain TP-self-signed-1017650632 certificate self-signed 01 3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030 31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274 69666963 6174652D 31303137 36353036 3332301E 170D3135 30343037 31303536 30375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649 4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 30313736 35303633 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281 81008B15 A50BCE53 C1A10611 78247737 97E31A5D 653AF401 024B244B F96B48E0 0A1B41EE 16FBFDD1 46F2E1E2 1329D2C6 EEFBCF5B 217DE650 7D2729B0 266008F3 AC4565EA 53D7FA5B 35761F14 6FBDCFAC 24994667 CB0311A9 7FE25580 7D9564C3 BFE10A4A F5F57C4F C4E18EC9 19874BCA 03127F56 252D04B8 9465A23F FBB9045B D9EF0203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603 551D2304 18301680 146EAE54 B0C95DC2 0561F596 BC47E94B EF80617E F9301D06 03551D0E 04160414 6EAE54B0 C95DC205 61F596BC 47E94BEF 80617EF9 300D0609 2A864886 F70D0101 05050003 81810014 F5B63E51 AD80D4A0 3230E94D 3D1BE457 5D7CF78D 3C911F32 C7238D24 4A8C84D5 D5D4F744 EA2FFD5C 4A40E7A1 A517BFE3 10CC6078 5F446A15 F60EA41E 08C688AF A7834485 0991C739 F3CA38FE CFAA31E2 C72031C1 BAEFA756 719E4903 705C98A7 E20CB004 6FC82D22 D4E62E0C DBA54481 F6A68B3D AA905352 DD76B19F CD4190 quit! ! username cisco password 0 somepasswordusername admin privilege 15 secret 5 $1$JJZR$kw8yTTHkjUGKIfB8sQiyJ0! ! controller VDSL 0 shutdown ! ip telnet source-interface Vlan1ip ssh port 2222 rotary 1ip ssh source-interface Vlan1ip ssh rsa keypair-name 1024! ! ! ! ! ! ! ! ! ! ! ! interface ATM0 no ip address shutdown no atm ilmi-keepalive! interface Ethernet0 no ip address shutdown ! interface FastEthernet0 no ip address! interface FastEthernet1 no ip address! interface FastEthernet2 no ip address! interface FastEthernet3 no ip address! interface GigabitEthernet0 no ip address! interface GigabitEthernet1 description PrimaryWANDesc_WAN interface ip address 129.x.x.5 255.255.255.0 duplex auto speed auto! interface Vlan1 description $ETH_LAN$ ip address 192.168.1.1 255.255.255.0 ip helper-address 192.168.1.254 ip nat inside ip virtual-reassembly in ip tcp adjust-mss 1412! ip forward-protocol ndip http serverip http access-class 23ip http authentication localip http secure-serverip http timeout-policy idle 60 life 86400 requests 10000! ! ip dns serverip nat inside source list nat-list interface GigabitEthernet1 overloadip route 0.0.0.0 0.0.0.0 GigabitEthernet1! mac-address-table aging-time 15no cdp run! ! ! banner exec ^C% Password expiration warning.----------------------------------------------------------------------- Cisco Configuration Professional (Cisco CP) is installed on this device and it provides the default username "cisco" for one-time use. If you have already used the username "cisco" to login to the router and your IOS image supports the "one-time" user option, then this username has already expired. You will not be able to login to the router with this username after you exit this session. It is strongly suggested that you create a new username with a privilege level of 15 using the following command. username <myuser> privilege 15 secret 0 <mypassword> Replace <myuser> and <mypassword> with the username and password you want to use. -----------------------------------------------------------------------^C banner login ^C-----------------------------------------------------------------------Cisco Configuration Professional (Cisco CP) is installed on this device. This feature requires the one-time use of the username "cisco" with the password "cisco". These default credentials have a privilege level of 15. YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE PUBLICLY-KNOWN CREDENTIALS Here are the Cisco IOS commands. username <myuser> privilege 15 secret 0 <mypassword>no username cisco Replace <myuser> and <mypassword> with the username and password you want to use. IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF. For more information about Cisco CP please follow the instructions in the QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp -----------------------------------------------------------------------^C ! line con 0 no modem enableline aux 0line vty 0 4 access-class 23 in privilege level 15 transport input telnet ssh! scheduler allocate 60000 1000! end
I am connected via the port console of the router and can ping the outside world only from port GigaEthernet1 whose IP address
129.x.x.5
Clients that connect on VLan1 get IP addresses in the range of
192.168.1.0/24
and these clients can ping each other, the gateway that is192.168.1.1
and the GigaEthernet1 that has the intellectual property129.x.x.5
What's not in this case? Any suggestion is appreciated the most.
@[email protected] / * /;
Thanks for your post. I had a look at your configuration, and it is great that you are a few short steps on your NAT is why it does not work. Please follow the steps below in order to get this work properly.
1. first of all, let us remove the old configuration NAT then back to a clean slate with the following commands.
no ip nat inside source list nat-list interface GigabitEthernet1 overloadclear ip nat translation *
2. now, we will create a list of access control allows for NAT traffic and create the new NAT statement for that tie together. * NOTE: If the version of IOS, you are running requires mask rather than generic then change 0.0.0.255 to 255.255.255.0.
access-list 100 permit ip 192.168.1.0 0.0.0.255 anyip nat inside source list 100 interface GigabitEthernet1 overload
3. the next step is to specify the logical role of the interfaces in question, whether they are 'inside' or ' outside'.
interface vlan1 ip nat inside exitinterface GigabitEthernet1 ip nat outside exit
4. Finally, save us the configuration and reload.
copy run startreload
After the unit is returned as a result of charging, please try again. In some cases - depending on the version of the IOS, you have to ping the outside world from a computer on the local network rather than just sourcing of the interface VLAN. Try this back and forth, and let me know how get you there. I can't wait to hear back.
Kind regards
Luke Oxley
Please evaluate the useful messages and mark the correct answers.
-
Cannot add a Cisco CP 2.1 wireless
Hello
I am very new with Cisco devices. I have a Cisco 851 router wireless and I configured manually (a simple local network with a Wan interface for internet).
Now, I'm trying to add a Wpa wireless network to complete the configuration of my wanted.
I use the new Cisco Configuration professional 2.1 (the thick interface on my laptop and the Express one on the router).
I watched 2 screens casts ( http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/scrcst/ccpsc.html -> "Configuring the Wireless feature on routers with Dot11 Radio Interface" & "Set up a wireless network with WPA personal security enabled").
Basically, these casts screens show how to access the basic graphical interface to simply add a wireless network (see the screenshot in attachment).
Then I got the following error message: "no more than - 1 SSID can be configured for the Dot11Radio0 interface."
It's strange to me because my setup is quiet basic and I haven't even touched the Dot11Radio0 interface.
The other link (at the bottom of the screenshot) wireless application is too complex for me and I want to add my network wireless through the Cisco CP 2.1 Basic interface and see the CLI commands.
Here is some information on my router (if more information is needed, please let me know)
Cisco IOS software, software C850 (C850-ADVSECURITYK9-M), Version 12.4 (4) T7, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Updated Thursday 29 November 06 00:37 by kellythwROM: System Bootstrap, Version 12.3 (8r) YI3, VERSION of the SOFTWARE
GregCisco851W uptime is 1 hour, 45 minutes
System return to the ROM to reload
System image file is "flash: c850-advsecurityk9 - mz.124 - 4.T7.bin".Cisco 851W (MPC8272) processor (revision 0 x 200) with 59392K / 6144K bytes of memory.
Card processor ID FCZ111024RV
MPC8272 CPU Rev: Part Number 0xC, mask number 0 x 10
5 FastEthernet interfaces
1 802.11 radio
128 KB of non-volatile configuration memory.
20480 bytes K of on board flash system (Intel Strataflash) processorConfiguration register is 0 x 2102
Thanks in advance
Hi Gregory,
I discovered that Cisco Configuration Professional-> add wireless network is not supported on the particular IOS image that you use. You need the IOS version to 124 - 15.T or higher. Could you pls try after upgrading the IOS pls image?
Thank you
Chaitra
-
Hi, I want to know whether or not our current phone system uses the CCM? Unfortunately, I know that even with our systems and next thing I know, it's that use us Cisco Configuration Professional utility to configure the phone display names and update the date & time.
Could someone provide me with the steps to check if we use CCM/CUCM? Sorry to be a beginner.
Call Manager Express, another acronym which is CUCME - Cisco Unified Communications Manager Express.
CME/CUCME is function of the router, you can access it via telnet/ssh.
CUCM can be access through GUI and SSH.
Kind regards
Mohammed Noor
-
Hello
I just bought a Cisco 891 - k9. I bought it to learn how to configure the site to site VPN. below are my "sh version' and 'license sh. Can someone explain to me if I have the opportunity to set up the VPN. Also, if anyone can point me in a direction where I can find out what are the exact specifications made my IOS support and license. I bought this router used, and doesn't know what image and license are on the new router. Thank you!
=============================================================================================
yourname (config) #do sh version
Cisco IOS software, software C890 (C890-UNIVERSALK9-M), Version 15.0 (1) M4, VERSION of the SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Updated Saturday, October 29, 10 00:19 by prod_rel_teamROM: System Bootstrap, Version 12.4 YB3 (22r), RELEASE SOFTWARE (fc1)
yourname uptime is 20 minutes
System to regain the power ROM
System image file is "flash: c890-universalk9 - mz.150 - 1.M4.bin.
Last reload type: normal chargingThis product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.htmlIf you need assistance please contact us by mail at
[email protected] / * /.Cisco 891 (MPC8300) processor (revision 1.0) with 498688K / 25600K bytes of memory.
Card processor ID FTX15040E4B9 FastEthernet interfaces
1 gigabit Ethernet interface
Serial 1 interface
1 line of terminal
1 module of virtual private network (VPN)
256K bytes of non-volatile configuration memory.
244440K bytes of ATA CompactFlash (read/write)License info:
License IDU:
-------------------------------------------------
Device SN # PID
-------------------------------------------------
* 0 CISCO891-K9Information about the license for "c890.
License level: advipservices Type: Permanent
Next reboot license level: advipservicesConfiguration register is 0 x 2102
=========================================================================================
votre_nom #sh lic
* 00:56:54.739 Feb 25: % SYS-5-CONFIG_I: configured from console by cisco on consolee
votre_nom license #sh
1 function of the index: advipservices
Time left: life
License type: Permanent
The license status: Active, in use
Number of licenses: not counted
License priority: medium
Function index 2:-ips-updated ios
Period of opportunity: 0 minute 0 second
License type: assessment
Start date: N/a, end Date: December 31, 2025
The license status: don't use, not accept EULA
Number of licenses: not counted
Priority of license: no
Index 3 function: SSL_VPN
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: assessment
The license status: don't use, not accept EULA
Number of licenses: 100/0/0 (active/in-use/Violation)
Priority of license: no===========================================================================================
Sitnikov - Ignat
According to the data sheet of the product, the default license is Advanced IP services. This seems to be what you have. The Office IPS and SSL VPN is an update of license.
You should be able to build an IPSec tunnel with another router by following the steps in the CLI in the Setup Guide. You can also do this via the user interface using Cisco Configuration Professional (CCP). Several times first users are struggling a bit by using only the CLI - I would suggest using the you GUI and then analyze the resulting configure script to understand the various components of a VPN configuration
Maybe you are looking for
-
in your opinion... what choice is the best for my smart phone the FireFox or FireFox Sync? Please answer quickly... « D »
-
Firefox 8 displays the source at insead nested HTML IFRAME
I got IFRAME nested for a few years, Firefox and other browsers display them without problems, but today with Firefox 8, I see the HTML source of the embedded iframe. My test scenario had a graph of Google in it, but because it is only the display of
-
HP DesignJet 750 c: HP Designjet 750 c color issue
This is my story! HP Designjet 750 c (C4709B) worked well with my Windows 7, until it upgraded to Windows 10. After much effort, downgraded the OS to Windows 7 again. Now had a lot of trouble finding the driver for Windows 7 64-bithell. Tried all com
-
Use the type of data "table of container" in teststand
Hello I have a problem with data type "table of container" in the TestStand. I defined an empty local variable in the form "table of the container" with the name "array_of_container1" and also a local variable as 'container' with a name "container1".
-
Is IMAQ write file 2 part of license acquisition?
Hey! We do an application used for presentation and image acquisition. I noticed that if we build this type of application (by using only VI of the acquisition of the vision) on our license labview 2009, no run-time license is necessary for our custo