CIsco first Heat Map influence APs?

Similar Questions

• Generate the heat map to multiple Images

  I am a fairly new user for Photoshop and can bit larger than I can chew with a project I am doing.

  I have several images of a human body. People have made marks on the image based on certain criteria. I need to combine images into a single image and generate a heat map showing the percentage of people who have made marks in a given area. My plan is that this, this was to import the part marked each picture in a layer and normalize the color is the same in all layers. I then put the opacity of each layer at 1%, with the outline of the body on the bottom layer. Finally, I have an image which shows strongly marked areas denser than the lightest points scored.

  My problems as I see them are twofold.

  (1) because the opacity is only a range of integers from 0 to 100, after that I have 100 layers, I run the risk of losing information in areas where each layer has a brand in the same place. Since I now have an opacity of 100% to this place, all the extra layers will not add to the opacity.

  2) there are several combinations of images based on different criteria, and the number of layers in each image is not the same. The final heat maps must show the percentage of marked areas. So an image with layers of 80 and image with 100 layers must display the same percentages for the heat map. I mean, if 40 people over 80 mark a place, which represents 50% of the total, while 40 people on the 100 mark in the same place, if by 40%. However, based on my strategy of opacities coming to overlap, the two will show the same density (40% opacity).

  I hope that someone can suggest a strategy to overcome these limitations, or other method of combining images to create the final heat map.

  This is my first post so I tram don't know if that's an appropriate question or it is the appropriate forum, but no help any who can offer would be immensely appreciated.

  Have you checked the smart objects and stack Mode?

  Stacks images in Adobe Photoshop

• Issue of integrating Cisco first Collaboration insurance LDAP

  Hello

  I 9.0.0 - 24376 Cisco first coverage of Collaboration with lot of fixes 3, and although I added the LDAP protocol successfully to the server of the CPCA, and when I do the connection test it gives me connection is successful with the LDAP server, then I added users to the management of the users using the same user name as the user account on the LDAP protocol and LDAP user check.

  but when the user tries to connect to the CPCA using his LDAP account an error message saying that the user name or password is incorrect.

  If the ideas please?

  Insurance server connects with CN, not sAMAccountName in the LDAP server, make sure that you type in the user name as "John Doe" instead of jdoe.  Check if it works.

• Cisco first Infrastructure 2.2 API GET Interfaces

  Hello

  I am using Cisco first Infrastructure 2.2 and I am trying to get some info of the API in order to build a model.

  But I can't find how to get the name of all the interfaces of an IP address from the device. I tried many queries, but none of them is what to expect. Is there a way interfaces?

  Thank you.

  Guillaume.

  Hello, don't 'SE InventoryDetails' gives you what you need? I believe you can use the features of REST to filter down to only the devices you are interested.

• Collection of newspapers from Cisco first Infrastructure

  Hello

  I am currently working in integrating Cisco first Infrastruture with Qradar siem tool.

  Can someone help me out below questions:

  (1) how and where is the paper stored in Cisco first. ?

  (2) newspapers contains logs first Cisco devices manages?

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Hello

  (1) how and where is the paper stored in Cisco first. ?

  / opt/CSCOlumnos/logs

  (2) newspapers contains logs first Cisco devices manages?

  AS FAR AS I KNOW,

  Infrastructure main Syslogs are directly read the 514 and then filtered udp port
  , no SEV1 and SEV2 syslogs are removed and not be exchanged from db. The
  syslog messages will not be saved in files.

  So far, PI support only syslog SEV 0,1 and 2.

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Unfortunately, this feature is not there in PI so far.

  Thank you-

  Alya

  Ratings encourage contributors *.

• Cisco first Collaboration - what is free

  Hi guys,.

  What is the free version of privileged collaboration of Cisco? I have to deploy for a client and I saw the first Collab provisioning version available for download on Cisco, is it free?

  Can provide you any document that says the same thing. Also the special collaboration of Cisco can be deployed in HA mode using two virtual machines?

  The free versions are called Standard versions, rather than the paid versions, called advanced versions.  The law requires CUCM 10.x and later, using CUWL license and is covered in the commercial documentation of CUCM.

  There is not much difference between PCP standard and advanced design.  The main reasons to choose Advanced if you have a several cluster environment. Standard does support a call (CUCM editor) or GCE and a single message processor (CUC or CUE).  The most frequent reason is that in advanced you can delegate the management of orders for different groups of users (areas of the CFP) to different administrators.  Standard mode does not allow this. There are some additional differences as the API to the North is on in advanced as well as a workflow of order process sometimes required by large companies. Those are the main differences.

  HA is another story.  There is a general process of HA supported by the BU of PCP and PCA using VMWare HA.  HA in general was not popular with the CFP because most of the people do not believe it is necessary and choose instead a different path for the resilience. Most of the deployment in a way people distributed (app + database of VMs) and make the system of database as fault tolerant as possible/necessary using characteristic database process in the industry. The application server uses VMWare HA or FT to come up if the configuration hardware server dies for some reason any. Or is it just launched somewhere else.

  CFP has the ability to re-synchronization of network UC, UC network will continue to operate without running of PCP and the native interfaces of UC apps can still be used (PCP can catch up with the changes later), the need to spend more money and time to configure HA is difficult to justify in most cases.

  Concerning

• Is there someone out there who has built-in Cisco first optical 9.3.1 the Ciena 6500?

  We have an upcoming project where it looks like Ciena is going to be the winner.  Currently, we run first Cisco optical 9.3.1.  Is there someone out there who is actively control and configure 6500 CPO Ciena DWDM equipment?  If so, are there drawbacks, gaps?  All things good?

  Thank you

  Steve King

  Hello
  Unfortunately Ciena unsupported in the Conference of the PARTIES at all. Check it please first Cisco document view Supported Devices, 9.6.3.

• Tools of Cisco first conjunction and multiple Clusters

  I'm on the underside of the UC Applications:

  CUCM - 10.5.2
  CUC - 10.5.1
  REB - 10.0.2
  UCCX - 10.5.1
  CUPS - 10.5.2

  I use the below first of Collaboration Tools to manage

  Deployment of privileged Collaboration - 10.5.1
  Insurance of Collaboration - 10.5.0
  First supply of Collaboration - 10.5.0
  First Manager of licenses - 10.0.1

  I'm looking to install a different Cluster CUCM with connecting the unit and Cisco Unified presence running the version 11.X.

  I need to strengthen my first to more management tools later in order to manage the two clusters?  Will it affect my 10.5.X apps if I do?

  CJ

  You will need 11 PC. x to pick up new support of CUCM 11.x.

  I would upgrade to the last PC which is 11.5 for APC and 11.2 of the CFP (although the CFP 11.5 released this month).  10.x apps will not notice the change.

  Follow-up will show the results of these clusters of 10/11 and PCP knows the difference between the settings and services on groups of 10/11.

  Concerning

• Cisco first Infrastructure 3.1.3 - patching

  Hello

  a customer has installed a traditional life cycle license, ICC running the 3.1 version. We would like to upgrade to version 3.1.3.

  According to Cisco, ICC 3.1.3 supports the licensing model based on the chips for the cycle of life and insurance licenses. License consumption is based on symbolic weight by device type.

  ICC 3.1.3 takes to support the generation of a file single license with rights acquired to manage existing devices without having to purchase additional licenses. This special privilege is provided to existing customers as a one-off during the first Infrastructure 3.1.3 update installation.

  Does someone of you could advise me the way how to obtain such a license?

  Thank you very much.

  Jozef

  There is no need to change the license type if your existing licenses extend on your managed devices.

  I have updated three separate facilities from 3.x PI to 3.1.3 without changing the type of license.

  If you want or need to do, then open a TAC case, asking permission to support and licensing team will take care of him for you.

• Cisco first Infrastructure 2.0 is compatible with the Hyper-V environment?

  On version 2.0 first Cisco Infrastructure. It is now possible?

  First requires ESXi:

  http://www.Cisco.com/en/us/docs/net_mgmt/Prime/infrastructure/2.0/QuickStart/Guide/cpi_qsg.html#wp46865

• CISCO FIRST INFRASTRUCTURE 2.2

  Dear Sir.

  We have purchased preferred infrastructure cisco 2.2 and have just download the software:

  2.2 preferred infrastructure the physics of ISO Image (from GEN 1 device only)

  PI - APL - 2.2.0.0.158 - 1 - K9.ISO

  This is the first time, we will install the first cisco.

  the user has a server with all material specifications recommend for GEN1 and the installed operating system is WINDOWS 7 Professional.

  2.2 first cisco infrastructure will run on this server without any problem?

  awaiting your response earlier.

  Roger

  N °

  This image will only install and be supported on the Cisco Gen 1 (hardware OEM IBM) brand device.

  ISO is self-contained and designed to be installed on this server bare metal only. It includes a distribution of Linux RHEL custom as the operating system. It has built in and not configurable pilots to accurate NICs, hard disk drive controller and configuration etc.

  You should be getting version 3.1 in the form of open virtual appliance (ova) and the installation on a server with VMware ESXi.

• Cannot add WLC 5508 7.2.111.3 Cisco first Infrastructure 2.0

  Although the list of the Cisco Infrastructure compatibility matrix first on this 7.2.111.3 is supported for PI 2.0

  I'm not able to add the controller to the PI 2.0.

  The State of accessibility has always shown "Unknow" and the situation always SNMP "no answer for SNMP Get."

  There is no firewall between the WLC and PI.

  And ping test shows that it is accessible.

  If I try to add the controller to port managers (I know it's not working, but I want to try the accessibility), the State of accessibility showed "Reachable" but the SNMP State always demonstrated error.

  And if I use some SNMP test software to test the SNMP port. SNMP can be cited.

  I try down below the "Maximum VarBinds get PDU" but no luck.

  Something I can do to solve the problem?

  Hi, please check on wlc 5508:
  have you enabled snmp on wlc?

  mrncciew.com/2013/02/14/configuring-SNMP-on-WLC/

  Concerning
  Please rate if this can help

  Sent by Cisco Support technique iPhone App

• Cisco first Infrastructure 2.2 DVD installation fails

  We want to migrate to 2.2 first, but management does not want downtime of the device. Try to install the first 2.2 via DVD on a Dell R300 server and then import config of our apparatus to test questions. However, the NCS installation fails due to a problem file. Second burned DVD fails as well. Has anyone tried this before? Using a virtual machine (at this stage), is not an option.

  I have not tried, but don't wait until it works.

  The .iso (DVD) image is tailor-made for the installation on the device of Cisco NCS material. To install on any other material, you must first have the VMware ESXi hypervisor and install using the .ova image.

• Infrastructure 2.0 Cisco first deployment models

  Hello world

  I wanted to deploy a configuration model 'first infrastructure 2.0. I tried with the output of the model "banner Configuration-IOS" box. I have deployed it to a device that is a switch to Cisco Catalyst 2960 - 24PC - L. I chose "Add" in the menu dropdown 'Connection Action' and typed in 'Test' in the field 'login Message. All the rest is the default value. After you apply the changes, I clicked on the Ok"" button. After this IP trying to deploy the model configured on this device. A few seconds later the 'Last Run status' column in the 'jobs' dashboard, said "failure." The 'summary', said:

  "Error in the execution of XDE procedure, Error Message::No 'CLI_ENABLE_PASSWORD' attribute for the device"2344372"

  I tried to figure it out and searched the Internet but I couldn't find a solution.

  Thanks in advance for your efforts!

  Have you confirmed that the enable password is correct in the credentials of the device? (Device Center, select and modify the devices)

• Cisco first 2.1 / 2.2 support for Cisco ise 1.3?

  Hi, I just tried to connect cisco IP 2.1 to cisco ISE 1.3, but fails.
  I read the Release Notes, only 1.2 ISE ist supported.
  But I was wondering that the ssl negotiation fails (I made a packet capture).
  So PI 2.1 has not tried to connect to the ise 1.3 via api, because of the connection fails during the ssl handshake.

  Anyway, does anyone know if ISE 1.3 will be supported with a PI or PI 2.2 version 2.1.x?

  ICC 2.1.2 supports up to 1.2 ISE.  ICC 2.2 release date is scheduled for December 2014.  Read below.

  Table 4 The Infrastructure first, Cisco and Cisco wireless version compatibility matrix