Cisco first Infrastructure 2.2 DVD installation fails

Similar Questions

• Cisco first Infrastructure 2.2 API GET Interfaces

  Hello

  I am using Cisco first Infrastructure 2.2 and I am trying to get some info of the API in order to build a model.

  But I can't find how to get the name of all the interfaces of an IP address from the device. I tried many queries, but none of them is what to expect. Is there a way interfaces?

  Thank you.

  Guillaume.

  Hello, don't 'SE InventoryDetails' gives you what you need? I believe you can use the features of REST to filter down to only the devices you are interested.

• Cisco first Infrastructure 3.1.3 - patching

  Hello

  a customer has installed a traditional life cycle license, ICC running the 3.1 version. We would like to upgrade to version 3.1.3.

  According to Cisco, ICC 3.1.3 supports the licensing model based on the chips for the cycle of life and insurance licenses. License consumption is based on symbolic weight by device type.

  ICC 3.1.3 takes to support the generation of a file single license with rights acquired to manage existing devices without having to purchase additional licenses. This special privilege is provided to existing customers as a one-off during the first Infrastructure 3.1.3 update installation.

  Does someone of you could advise me the way how to obtain such a license?

  Thank you very much.

  Jozef

  There is no need to change the license type if your existing licenses extend on your managed devices.

  I have updated three separate facilities from 3.x PI to 3.1.3 without changing the type of license.

  If you want or need to do, then open a TAC case, asking permission to support and licensing team will take care of him for you.

• Collection of newspapers from Cisco first Infrastructure

  Hello

  I am currently working in integrating Cisco first Infrastruture with Qradar siem tool.

  Can someone help me out below questions:

  (1) how and where is the paper stored in Cisco first. ?

  (2) newspapers contains logs first Cisco devices manages?

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Hello

  (1) how and where is the paper stored in Cisco first. ?

  / opt/CSCOlumnos/logs

  (2) newspapers contains logs first Cisco devices manages?

  AS FAR AS I KNOW,

  Infrastructure main Syslogs are directly read the 514 and then filtered udp port
  , no SEV1 and SEV2 syslogs are removed and not be exchanged from db. The
  syslog messages will not be saved in files.

  So far, PI support only syslog SEV 0,1 and 2.

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Unfortunately, this feature is not there in PI so far.

  Thank you-

  Alya

  Ratings encourage contributors *.

• CISCO FIRST INFRASTRUCTURE 2.2

  Dear Sir.

  We have purchased preferred infrastructure cisco 2.2 and have just download the software:

  2.2 preferred infrastructure the physics of ISO Image (from GEN 1 device only)

  PI - APL - 2.2.0.0.158 - 1 - K9.ISO

  This is the first time, we will install the first cisco.

  the user has a server with all material specifications recommend for GEN1 and the installed operating system is WINDOWS 7 Professional.

  2.2 first cisco infrastructure will run on this server without any problem?

  awaiting your response earlier.

  Roger

  N °

  This image will only install and be supported on the Cisco Gen 1 (hardware OEM IBM) brand device.

  ISO is self-contained and designed to be installed on this server bare metal only. It includes a distribution of Linux RHEL custom as the operating system. It has built in and not configurable pilots to accurate NICs, hard disk drive controller and configuration etc.

  You should be getting version 3.1 in the form of open virtual appliance (ova) and the installation on a server with VMware ESXi.

• Cisco first Infrastructure 2.0 is compatible with the Hyper-V environment?

  On version 2.0 first Cisco Infrastructure. It is now possible?

  First requires ESXi:

  http://www.Cisco.com/en/us/docs/net_mgmt/Prime/infrastructure/2.0/QuickStart/Guide/cpi_qsg.html#wp46865

• Cannot add WLC 5508 7.2.111.3 Cisco first Infrastructure 2.0

  Although the list of the Cisco Infrastructure compatibility matrix first on this 7.2.111.3 is supported for PI 2.0

  I'm not able to add the controller to the PI 2.0.

  The State of accessibility has always shown "Unknow" and the situation always SNMP "no answer for SNMP Get."

  There is no firewall between the WLC and PI.

  And ping test shows that it is accessible.

  If I try to add the controller to port managers (I know it's not working, but I want to try the accessibility), the State of accessibility showed "Reachable" but the SNMP State always demonstrated error.

  And if I use some SNMP test software to test the SNMP port. SNMP can be cited.

  I try down below the "Maximum VarBinds get PDU" but no luck.

  Something I can do to solve the problem?

  Hi, please check on wlc 5508:
  have you enabled snmp on wlc?

  mrncciew.com/2013/02/14/configuring-SNMP-on-WLC/

  Concerning
  Please rate if this can help

  Sent by Cisco Support technique iPhone App

• Backup folder Configuration Cisco first infrastructure 2.0?

  Hi all

  where is the backup devices folder in PI 2.0 configuration, I tried searching with winscp for *.cfg but have not found anything.

  the most funny thing is when I am connected via the WEB (GUI), I can see the configurations of devices (under configuration of archive).

  so anyone know where is the file?

  Thank you

  Dawit

  Hi Dawit,

  https://supportforums.Cisco.com/message/3975460#3975460

  check the thread above, hope this will answer your query...

  Thank you-
  Alya
  [Note the useful post]
  Ratings encourage contributors *.

• Page Images software Cisco first Infrastructure 2.2 broken after installing patches

  Earlier today, we installed 2.2.1 POODLE Fix (1.0.0) PI and PI 2.2.1 updated corrective (1.0.0) on 2.2 of the ICC. After reloading, we get status 404 when you navigate to the inventory > Device Management > software image.

  Also found this error in the Chrome development tools:

   Error: Unable to load applications/swim/jsp/ImageRepositoryTable.jsp?id=/ status:404

  Does anyone know how to fix this?

  Hello

  You will need to open a TAC case to get the patch published for you.

  Stephen

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

  Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

  A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

  I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

  Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

  I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

  What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

  I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.

• Infrastructure 2.0 Cisco first deployment models

  Hello world

  I wanted to deploy a configuration model 'first infrastructure 2.0. I tried with the output of the model "banner Configuration-IOS" box. I have deployed it to a device that is a switch to Cisco Catalyst 2960 - 24PC - L. I chose "Add" in the menu dropdown 'Connection Action' and typed in 'Test' in the field 'login Message. All the rest is the default value. After you apply the changes, I clicked on the Ok"" button. After this IP trying to deploy the model configured on this device. A few seconds later the 'Last Run status' column in the 'jobs' dashboard, said "failure." The 'summary', said:

  "Error in the execution of XDE procedure, Error Message::No 'CLI_ENABLE_PASSWORD' attribute for the device"2344372"

  I tried to figure it out and searched the Internet but I couldn't find a solution.

  Thanks in advance for your efforts!

  Have you confirmed that the enable password is correct in the credentials of the device? (Device Center, select and modify the devices)

• Tried to install CS5 - has got over 100 errors saying "Adobe CS5 Infrastructure CSXS: installation failed.

  I have a CS5 Design Preumium student edition I had while in College but the laptop I installed it on no longer works and I would like to install it on my new computer. When I tried to install it, I got over 100 error messages.

  What my error message looks like:

  Exit code: 7

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 102 (s), 100 warning (s)

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ERROR:-Adobe CS5 Infrastructure CSXS: installation failed

  And this error continues on a 100 times.

  Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

• First Elements 13 - Installer fail to initialize

  Hello

  I get an error "The Installer failed initialize", when trying to install the first 13 items.

  OS: Windows 8.1

  I tried the below, but did not the program on the list to uninstall when I get to the list of Control Panel programs.

  Please check the help below document:

  Error "Setup could not initialize". Install desktop application | Windows

  
  

  ANY advice would be really appreciated.

  Thank you

  O'Briain
  

  O'Briain you indicated that you had no other Adobe Creative previously installed software.  If this is the case there should be no previous installation of Adobe Application Manager.  Please use the Control Panel programs and features to ensure that all Adobe Creative Software are removed.

  You will then want to use the available CC cleaning tool to use CC Cleaner tool to resolve installation problems. CC, CS3 - CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html to ensure that all entries have been deleted.

• Problems installing items 14 & first items 14 - Installation failed error

  I just bought 14 items & items of Prime Minister for work and cannot take the step of installation.  I tried to delete the files and download and leave, but the same problem occurs.  We do not have broadband here and I wonder if it is corrupt download somehow, but I was able to download and use the trial version of a few months ago and had no problems then.

  Don't know what to try then it's the error:

  

  News of the computer:

  Dell Vostro 360

  I-5 Core Intel

  6 GB OF RAM

  64 bit opperating system

  Windows 7 Professional

  Hello

  Please see item 14 Photoshop installation failed

  Let us know if this helps!