Cisco IOS - failed login Admin

Similar Questions

• Cisco IOS device - password enable

  Y at - there a trick to getting the password to enable working on Cisco's IOS device?

  I created my first workflow to connect to a Cisco IOS device recently and initially could not do the work of enable mode.

  Using activity "Send commands to the Interface", I run the command "enable."

  From there on, the activity times out.

  The goal is to use the Cisco IOS expect model, I noticed the option 'raising command privilege '.

  How is it used? Should expect model automatically detect the order of lifting and then use awaits below?

  If so, it doesn't seem to work.

  The only way I could make it work was to add my own manual expect activity "send commands to the Interface. I used the targets 'Elevation of privilege command' variable reference as await them and sent the password for admin users in response.

  It is to open the model waiting for you to use an order of elevation. If you select not those expect the models and you run an 'enable' command and you command prompt, turned to the sign ' # ', then it would not be all wait would expire models and additional orders and not work.

  -shaun

• Where can I download Cisco IOS Software

  Please can someone give me where should I always upload images of Cisco IOS

  Thank you very much

  Directly to the source:

  http://www.Cisco.com/Cisco/software/Navigator.html

  Note that an ORC (Cisco connection) and the valid service contract are necessary for the number of items.

  Best regards

  Ed

• Cisco IOS Software Internet Key Exchange vulnerability Enquiry

  Products affected

  Cisco IOS devices are vulnerable when you run a software image of an affected version of the Cisco IOS software that does not support the IKE version 2 (IKEv2) and is configured to use IKE version 1 (IKEv1).

  Vulnerable products

  This vulnerability affects Cisco IOS 15.1GC, 15.1 T software version trains and 15.1XB. No other Cisco IOS software release trains are affected.

  Ref: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20130327-ike

  If we use "not affected (for example; version". 12.4, 15.0 releases)"and configured with IKE version1?  Can it be affected by this vulnerability?

  Subsys router #sh | include ikev2

  ikev2_cli_registry registry 1.000.001

  Thank you best regards &,.

  Ye

  You are not affected by this vulnerability.

  As described in the notice - "There is no affected 12.4 based rejection" and «There is no rejection of base affected 15.0»

• Defining a 1852nd Aironet AP - Radio Off - Cisco IOS 12.3 (4) JA

  I have a brand new Cisco Aironet 1800 AP series I'm trying to install. Specifically the 1852E. I do not have a controller and try to use the method of deployment of mobility Express. When I received the unit there is a yellow label more precisely declaring outside: "OFF BY DEFAULT note RADIOS: radios are disabled by default for Cisco IOS releases 12.3 (4) JA and later.

  If anyone can please tell me how I am supposed to this access point configuration when the radios are not suite, so the CiscoAirProvision SSID is not broadcast?

  I tried the following:

  1 connect the unit to my PoE switch. Unit Gets power and discovery mode starts (red/orange/green light cycling). He succeeded receives an IP address from my DHCP.

  2. when I try to access the device through my laptop via the local LAN it just times out. Pings meet.

  I apologize if my post seems harsh, I am quite agitated that even after having spent more than 5 hours trying to troubleshoot and get this thing to work, there was nothing else than a nightmare (both for the installation of touted 10 min). I do RTFM. I missed something simple jumps? or am I just to assume that Cisco has really missed the boat the patch appropriate for an assignment in their literature.

  FOR INFO. Thorough searches Google and research on this forum gave me no help.

  Thank you.

  Convert a CAWAP AP an AP express mobility

• Cisco IOS router 837 - configure DDNS / dynamic DNS

  I have an Internet, connected to my Cisco router link. The package that I subscribed comes with a dynamic IP address. I said me, if I need remote access in the Cisco router, I need to enable the DDNS function. Is this possible on a Cisco router? I have been informed that this feature is not supported. Please help me

  Hi Bro

  Yes, Cisco ASA and Cisco IOS router supported DDNS. Just make sure you have the right version of IOS, which you could refer to this URL of Cisco http://www.cisco.com/en/US/docs/ios/12_3/12_3y/12_3ya8/gt_ddns.html#wp1202953.

  Please refer to the config below made with dyndns.org.

  !

  hostname INT-RTR1
  !
  IP domain name dyndns.org
  8.8.8.8 IP name-server
  !
  IP ddns update DynDNS method
  HTTP
  Add http://ramraj: [email protected] / * //nic/update?system=dyndns&hostname=&myip=>
  maximum interval of 30 0 0 0
  minimum interval 30 0 0 0
  !
  interface Dialer1
  IP ddns update hostname INT - RTR1.dyndns.org
  IP ddns update DynDNS
  !

  Note: hostname = INT - RTR1.dyndns.org was the host added/registered in the dyndns.org site.

  Note: Press Ctrl + V, then just type the symbol? When to add the CLI adds http://___ above.

  Note: ramraj:cisco123 is simply an example of an IDs in dyndns.org.

  You can also refer to this URL for more details http://www.petri.co.il/csc_configuring_dynamic_dns_in_cisco_ios.htm

  P/S: If you cela this comment is useful, please rate well :-)

• Cisco IOS server certificate - is it supported on routers 857/877

  Please can someone confirm if the certificate of Cisco IOS server feature is supported on the Cisco 857 router. We have checked with the Software Advisor and no picture for the 857 when the server certificate of IOS feature is selected, but advancedIpservices image v 12.4 (11) T arrives to the 877.

  The two 857/877 supports IOS server Certificate

  to 857 you need the ADVANCED SECURITY feature set 12.3 (14) YT

  http://Tools.Cisco.com/ITDIT/CFN/dispatch?Act=feature&ImageID=619356&platformFamily=306&featureSet=8&featureSelected=2208&availSoftwares=iOS

  877 offers more IOSes with Certificate server supports when I chose the certificate server Cisco IOS feature with featured navigator I got a lot of IOSes supporting this feature

  Go to navigator feature

  http://Tools.Cisco.com/ITDIT/CFN/JSP/index.jsp

  Select search by function and select element Cisco IOS Certificate Server, you can filter the results by platform (857/877)

  M.

• Cisco IOS CA

  Team,

  I use software Cisco IOS XE, Version 03.15.00.S - Standard Support version Cisco IOS software, software of CSR1000V (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5 (2) S, (fc3) SOFTWARE VERSION to support my Cisco IOS CA.

  In short, I am trying to support a FlexVPN - client VPN Win7 according to document tac 115907 id

  In this document, he says that OpenSSL CA is used but a Cisco IOS CA can also be used. In tests I am at a point where my certificates do not match the example:

  The example document TAC:

  X509v3 extensions:
  X509v3 Key use: F0000000
  Digital signature

  Non-repudiation
  Encryption key

  Data encryption

  My version of laboratory:

  X509v3 extensions:
  X509v3 Key use: A0000000
  Digital signature
  Encryption key

  How can question - I get these replacement using the IOS Cisco CA extensions?

  Chris

  Chris,

  (Shameless Plug) take a look at IOS CA config I used:

  http://www.Cisco.com/c/en/us/support/docs/security/flexvpn/115014-flexvp...

  M.

• Cisco IOS - XR with ACS

  Hello, my question is if you need to configure the router Cisco IOS XR-activated (it is a series of 12 k by-the-by) differently on the side of the ACS or is it added like any other normal router.

  Hi raul,.

  the ios - xr router will act as a NAS for the candidate countries. If the configuration will be the same as any other NAS on GBA.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resloved

• HSRP in Cisco IOS - XE

  Hi, just got our Cisco 3850 switch newly shipped with IOS - XE. Here is an example of the command 'show version '.

  Switch(Config-if) #do show worm
  Cisco IOS software, IOS - XE software, catalyst L3 Switch (CAT3K_CAA-UNIVERSALK9-M), Version 03.02.03.SE VERSION SOFTWARE (fc2)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2013 by Cisco Systems, Inc.
  Last update Mon 23 - Sep - 13 18:24 by prod_rel_team

  Cisco IOS Software - XE, Copyright (c) 2005-2013 by cisco Systems, Inc.
  All rights reserved.  Some components of the Cisco IOS - XE software are
  distributed under the GNU General Public License ("GPL") Version 2.0.  The
  software licensed code GPL Version 2.0 is a free software that comes
  WITHOUT ANY WARRANTY.  You can redistribute it and/or modify it
  Code GPL under the terms of the GPL Version 2.0.
  (http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
  documentation or "Mention of license" file that accompanies the IOS - XE software.
  or the applicable URL listed on the brochure that accompanies the IOS - XE
  software.

  ROM: IOS - XE ROMMON
  BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) 1.18 Version, SOFTWARE VERSION (P)
           
  The availability of HK-CSW001 is 4 hours, 0 minutes
  Availability for this command processor is 4 hours, 3 minutes
  System return to the ROM to reload
  System image file is "flash: packages.conf.
  Reload last reason: reload the command

  This product contains cryptographic features and is under the United States
  States and local laws governing the import, export, transfer and
  use. Delivery of Cisco cryptographic products does not imply
  third party approval to import, export, distribute or use encryption.
  Importers, exporters, distributors and users are responsible for
  compliance with U.S. laws and local countries. By using this product you
  agree to comply with the regulations and laws in force. If you are unable
  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:
  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at
  [email protected] / * /.

  License level: Ipbase
  License type: Permanent
  Then reload license level: Ipbase

  Cisco WS-C3850-24 t (MIPS) processor with K 4194304 bytes of physical memory.
  Card processor ID FOC2007U0YG
  2 virtual Ethernet interfaces
  28 gigabit Ethernet interfaces
  4 ten interfaces Ethernet Gigabit
  2048K bytes of non-volatile configuration memory.
  K 4194304 bytes of physical memory.
  250456K bytes of Crash crashinfo files:.
  1609272K bytes of Flash Flash:.
  0K bytes of Flash model to usbflash0:.
  0K bytes of to webui::.

  MAC Ethernet base address: 00:cc:fc:d1:55:80
  Motherboard Assembly number: 73-16297-04
  Motherboard serial number: FOC20061W6G
  Revision number of the model: Z0
  Motherboard revision number: B0
  Model number: WS-C3850-24 t
  System serial number: XXXXXXXXXXX

  My problem is, I tried to HSRP 1 before using a plotter package and thought since he succeeded, I could do it here in this new switch, but after reading a few articles 1 HSRP went and here HSRP 2 but after I typed in the

  "interface vlan XXX".

  "ip address subnet XXX.XXX.XXX.XXX.

  command "watch version 2" is not available or the day before ipXXX XX. is not available either.

  I'm stuck with this problem now, appreciate any help from you guys.

  Thank you

  The f

  Hello Jeff,.

  We were also quite surprised at the point where we realized, that our brand new 3850 did not support HSRP. This feature was introduced in a second version of the IOS - XE. Currently, we run 03.06.00.E on our WS-C3850-24 t and this version support HSRP.

  I don't understand absolutely, why Cisco released such a combo of software/switch isn't over.

  So, please try a newer version of the software.

  See you soon

  Ichnafi

  Supplement: Cisco Feature Navigator (http://tools.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp) said: HSRP is supported since Version 3.3.0

• Cisco IOS SSL VPN on mobile

  Hello

  I want to know can I use the Cisco IOS SSL VPN on the use of mobile client Anyconnect. If yes what is the prerequisite, is there any kind of additional license required.

  Thank you

  In the following article:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-VPN-client...

  Q. is possible to connect the iPad, iPod or iPhone AnyConnect VPN Client to a Cisco IOS router?

  A. No. it is not possible to connect the iPad, iPod or iPhone AnyConnect VPN Client to a Cisco IOS router. AnyConnect on iPad/iPhone can connect only to an ASA that is running version 3,0000.1 or a later version. Cisco IOS is not supported by the AnyConnect VPN Client for Apple iOS. For more information, refer to the section security devices and software support to the Release Notes for Cisco AnyConnect Secure Mobility Client 2.4, Apple iOS 4.2 and 4.3.

  --

  Please do not forget to rate and choose a good answer

• CISCO IOS

  Hello!!!

  I have question for CISCO IOS.  How will I know? What CISCO IOS support SSH version 1 $2? and it is possible to update CISCO IOS Cisco 7200 routers series for supporting SSH

  In General, you know quickly if a version of the IOS support SSH if the name of the image has K9.

  Example: c1700-adventerprise -k9 -12.4.bin

  Otherwise, you can use Cisco IOS Feature Navigator and check taken IOS supported by name of the image featured.

• SHA version supported on Cisco IOS

  Guys,

  What is the SHA version that we support on the devices that support VPN from Cisco IOS? Just configuration options tell SHA...

  I do apreciate if you could point me to a cisco document to support your theory because client would require...

  Thanks in advance.

  hash (IKE policy)

  To specify the hashing algorithm in a policy of Internet Key Exchange, use the command hash policy Internet Security Association Key Management Protocol (ISAKMP) configuration mode. IKE policy define a set of parameters to use when the IKE negotiation. To reset the hash algorithm for the algorithm of hash-1 defaultsecure hash algorithm (SHA), don't use No form of this command.

  hash {sha | SHA256 . SHA384 | md5}

  no hash

  Description of the syntax

  SHA	Specifies the hash algorithm SHA-1 (HMAC variant).
  SHA256	Specifies the family of SHA-2 256 bits (HMAC variant) as the hashing algorithm.
  SHA384	Specifies the family of SHA-2 384 bits (HMAC variant) as the hashing algorithm.
  MD5	Specifies the MD5 (HMAC variant) as the hashing algorithm.

  Default values

  The SHA-1 hashing algorithm

  Control modes

  The ISAKMP policy configuration

  Order history

  Release	Change
  11.3 T	This command was introduced.
  12.4 (4) T	IPv6 support has been added.
  12.2 (33) SRA	This command was integrated into Cisco IOS version 12. (33) SRA.
  12.2SX	This command is supported in the Cisco IOS release 12.2SX train. Support in a specific 12.2SX release this train is dependent on your hardware platform game and platform functionality.
  Cisco IOS XE version 2.1	This command was introduced on the ASR 1000 series Cisco routers.
  15.1 (2) T	This command was modified. Sha256 , sha384 , and keywords have been added.

  Of course, depends a bit on your IOS.
  HTH,
  Ian

• Cisco IOS it helps 3rd party certificate

  Hello

  Can I use a 3rd party such as verisign, on Cisco IOS CA? All I can see on cisco.com is a self-signed certificate to the router.

  Thank you

  -santo-

  Santo,

  That's fair enough. A key piece of information to ensure that customers understand that a private PKI gateway is (for the purposes of deployment for example GETVPN) as secure as provided by the third party.

  Private PKI is not based on self-signed certificates free - only the root CA will take something like that :-)

  That being said, for reliability and flexibility I really suggest CA (ser, CRL, OCSP, public/private key backup) to store files on the external storage to the router.

  Takeway key which is a private PKI properly managed solution for deployments like DMVPN/GETVPN others is as secure as external 3rd party services (and often the time order of magnitude cheaper).

  M.

• Customer Cisco IPSec vpn cisco ios router <>==

  Hello

  I need to implement ipsec vpn for all users of 10-15. They all use the vpn cisco 5.x client and we have a router for cisco ios at the office. We already have a situation of work for these users. However, it has become a necessity which known only devices (laptops company) are allowed to install a virtual private network.

  I think that the only way to achieve this is to use certificates. But we don't won't to buy certificates if there is a free way to implement. So my question is

  (1) what are the options I have to configure vpn ipsec, where only known devices can properly configure a vpn and all unknown devices are blocked?

  (2) if the certificate is the only way. Can I somehow produce these certificates myself using cisco router ios?

  (3) someone at - it an example of a similar installation/configuration?

  Thanks in advance.

  Kind regards

  M.

  Unfortunately if you connect to the router IOS, there is no other way except using the certificate. If you connect to a Cisco ASA firewall, then you can identify the laptop company using DAP (Dynamic Access Policy).