Cisco ise 1.2 installation of certificates for the issue of cluster ise

Similar Questions

• Certificate for the hot spot ISE error

  We have just install an ISE Server (Version 1.3.0.876) and that you have set up a hot spot for guest users portal. Everything on the Portal works fine, however! The question that we run is, we installed a public cert signed by a public CA (Starfield CA), but when you can go to the EULA page on the ISE server, they get an error the path of certificate cert becomes not filled. I watch the cert that it gets, and the path contains only the issued cert, not the case there are on it. (I think that cert requests the browser to go to a site to download the latest public certification for the issued cert)

  I can work around this in order to allow this IP address he strikes in the ACL on the WLC, but I would simply like to have deliver ISE cert WITH public cases that's just in case the IP changes, or it is actually hitting a VIP and it comes to be responsive would be.

  Does anyone know how this is done?

  I tried the following:

  From the cert out of ISE, added public certification in the server certificate and added to the ISE, no luck. (I can this is done properly, let me know if this should have worked)

  Added the case public in ISE and self-confidence, no luck with either.

  Let me know! Thank you guys!

  Good job to fix the problem and for taking the time to post back here! (+ 5 from me).

  What is interesting is that the ISE should warn you and automatically restart the server when a new HTTPs certificate is installed. I wonder if this behavior may be changed with the last patch/version. In both cases, glad your problem is solved!

  Now, you must mark the thread as "answered" :)

• LRT224 - how to have a free installation of LAG for the games

  How can I get a free installation of Lag for the games in LRT224?

  I already tried to give "High priority" ports used by games like Dota 2, heroes of the storm, etc., as shown below, but the latency is still high.

  In our previous configuration with DLink LB604, we used the sticky connection and there is no Lag. We sticky Wan1 related game Ports and 2 Wan for Http and Https Ports.

  Is there a way for Linksys have a free configuration of Lag? We use this router now Internet café with 40 customers.

  Please help me how to reduce the latency/Ping times.  Thanks in advance

  

  If the router of games makes the QOS, then you must disable QOS in the LRA.

  Sorry, Linksys has not approved the agreement of beta tester yet. I'll have an update.

• Setting the SSL certificate for the web user interface

  How can I configure the SSL certificate for the management of a SG300 interface? I don't seem to find the configuration option in the web gui?

  Hello Dirk,.

  For import / create / modify h99350 ssl please go to ' ' security > SSL server > SSL server authentication settings.

  HTTPS is enabled by default.

  Thank you and best regards,

  Siva

• [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Hi all

  12 c

  Win7 64 bit

  I install 12 c, but I encountered error:

  

  [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Cause - failed to access the temporary location.

  
  

  Action - make sure that the current user has required permissions to the temporary location.

  Additional information:

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  
  

  What temp file should grant permissions to?

  Thank you very much

  JC

  Hello

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  Line underscore or annoying characters on your node name cause problem. What is the name of node? Please change it will solve the problem.

  Current version 12101 is to have this constraint. See MOS: 1957895.1

  -Pavan Kumar N

• I bought my free membership of creative cloud and installation of office for the use of the Institution. But accidentally uninstalled and deleted the program files. Now I can't update my apps and have to pay for the installation of creative cloud

  I bought my free membership of creative cloud and installation of office for the use of the Institution. But accidentally uninstalled and deleted the program files. Now I can't update my apps and will pay for the installation of creative cloud. What should I do?

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

• Certificate for the OSB 11.1.1.6.0 Version matrix

  Hello
  
  I couldn't able to find the certificate for the OSB 11.1.1.6.0 matrix - can some body help me.
  
  I need to know the weather above version of OSB supports - DB Oracle 11 g 2 and OS 11 Sunsolaris and candle material T4.
  It would be better if I can get certmatrix for sob11gR1.
  
  I looked on the following link
  http://www.Oracle.com/technetwork/middleware/IAS/downloads/fusion-certification-100350.html
  thre I couldn't find it.
  
  I have same info for version till11.1.1.4x osb, I need to 11.1.1.6.0.
  
  inCERMATRIX is given as - 11 GR 1 material (11.1.1.3 +)-supports the update of OS: Solaris 10 hardware: SPARC 4 +, Oracle 11.2.0.1 + > does this mean OSB 11.1.1.6.0 supports DB Oracle 11 g 2 and 11 Sunsolaris
  
  Thanks in advance
  Madhav
  
  Published by: user13839798 on July 20, 2012 12:58 AM

  When he says he is certified with db 11.2.0.3.0. does also implied that he is certified with DB CARS.

  Yes, when he says he is certified with Oracle DB 11.2.0.3.0, this means that it is certified with Oracle DB 11.2.0.3.0 CARS as well.

  Kind regards
  Anuj

• How to set up certificates for the default user profile

  I'm trying to create a package to install Firefox in our corporate environment that contains our locally-issued certificates. We can manually import the certs, but since Firefox is part of our brand, I would like to have the certificates already installed for users they open FF for the first time.

  I wrote a script that installs Firefox 22, copy custom files in the correct location files, creates a new profile folder (C:\Program Files (x 86) \Mozilla Firefox\defaults\profile) and copy the file cert8.db in that newly created file. However, when a user opens FF for the first time, none of our certificates are installed. If I close FF, copy the file cert8.db even in the .default file C:\Users\ < username > \AppData\Roaming\Mozilla\Firefox\Profiles\ < random string > and then reopen FF, CERT now show as installed upward.

  How can I automate this so that each user who opens FF will have implemented CERT?

  This is for the initial installation of Firefox.
  22 of Firefox, version 22.0.0.4917
  Windows 7, 64-bit

  Hello keslaa, since firefox 21 & upward this information would need to go to % ProgramFiles(x86) %\Mozilla Firefox\browser\defaults\profile in order to take effect.

  http://Mike.kaply.com/2013/05/13/more-major-changes-coming-in-Firefox-21/

• Internal error during the installation of DirectX for the user final web runtime install

  Hi all

  I was browsing the forums and reading the discussions that relate to my question.  Unfortunately, each of the solutions that I found do not seem to solve my specific problem.
  I recently got a new laptop (Dell E6540) and thought I'd try world of combat aircraft.  My old laptop did not have a graphics card that has been up to the task, but I think this one does.
  I am running Windows 7, which integrates the latest version of DirectX (11).  I downloaded and installed the game, and when I click on 'Play', I get the message informing me that I'm missing the d3dx9_43.dll.  I then visit the Microsoft Download Center and try to download the installer of web runtime DirectX end-user.  Following the installation of the components in the stage of finalisation of the web installer, I get the following message:
  "An internal system error has occurred.  Please refer to DXError.log and DirectX.log in your Windows folder to determine the problem. »
  I then click OK in the error message, the web installer shows failed to install, so I click "Finish."  At this point, the popsup Program Compatibility Assistant, saying: the program may not be installed properly and gives me the opportunity to 'Reinstall using recommended settings', what I'm doing.  Then run the web installer a second time, giving me the same error internal system presented above.
  I wonder if someone might have suggestions as to how I can resolve this issue (or to find the above mentioned .log files).
  Thanks for your help.

  While Win7 installed DX 9, 10 and 11 it does not install with all files.
  d3dx9_43.dll is the latest DX 9 files.
  The best method when you have not already updated DX is to use the DX Web Installer,.
  then you can try using them.
  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  If you have the same problem with the DX Web Installer trying to boot into Safe Mode with networking
  and try to run the installation program from there Web DX.

  -L' Web Installer does not overwrite the DX files, it only installs the DX 'missing' files, so when it
  is a DX of corrupted files and you do not receive an error with the name that you will need to use the full
  DirectX Redist (2010), which I assume is what you are trying to use, as this will overwrite all the
  DX files.
  -Similarly, you can use Safe Mode (networking not required that you have all files) may
  be used when there is a problem installing DX with the complete installation program.

  -When there is a corrupted file of DX and you get the name of this file, an error, as with
  your d3dx9_43.dll, you can delete this file in System32 (sysWOW64 when using 64-bit
  Windows) and when you run the Web Installer will replace the now "missing" with a new file
  copy.

  Absence of the foregoing, it may be your problem is more to do not have the necessary permissions to
  install the DX.
  This could be due to UAC settings too high, does not not as administrator or another
  restrictive framework, maybe even your anti-virus (disable temporarily when trying to install DX).
  Try - R / click the DXSETUP.exe. Then go to Properties-compatibility and check the box
  next to the race... as an administrator.
  .

  .

• Certificates for the DNS (high availability)

  Hi all

  We have CAM and ca in HA mode. We must generate the CSR, but I have a few cofusion on the DNS name.

  the network configuration is like that

  name IP address host name

  ============     ========

  192.168.0.8 CAM01

  192.168.0.9 CAM02

  192.168.0.10 (virtual ip address)

  CAS01 172.30.1.8

  172.30.1.9 CAS02

  172.30.1.10 (virtual ip address)

  all host names are already registered in local dns, and all devices are pings with the COMPLETE domain for example. CAM01.test.com, CAM02.test.com

  and what hostname do I use during the CSR?

  Thank you

  Hello

  Create a third name, call CAM and can be resolved to the IP Address of the Service. Generate your CSR for this.

  The same for CAs. The name must resolve to the IP Address of the service and you should get certificate for that name.

  HTH,

  Faisal

• How to get a certificate for the use of bitlocker?

  I want to use bitlocker to encrypt my hard drive but need a certificate from me. can someone help me?

  Click Start, click Help, and then seek help of BitLocker. It's all explained here. You then follow this process:

  1. Practice with Bitlocker on a USB flash drive until you are completely comfortable with the concept.
  2. Back up your hard drive.
  3. Perform a few spot-checks on another machine to ensure you can read the data.
  4. Follow all the recommendations for the backup of your certificates
  5. Encrypt the drive. This can take several hours.

  If you skip steps 1. . 4 then you are likely to join the Group of people who wanted a crack encryption scheme to the test, only to find out later that it is very resistant to the crack, unless you have a valid certificate. BitLocker does not distinguish between you (the owner) and someone else. You have a certificate, or you don't.

• Help generate the SSL certificate for the Security Server

  Hi people,

  We have server (ss - 01.mydomain.local) security and connection server (cs - 01.mydomain.local). Now intend to install a certificate on the Security server. What should be the common name.

  our Web site is something like access.mydomain.local.

  Also, we plan to install SSL only on security for internet access server, this will affect the internal users, access to the connection to the server.

  Thanks and greetings

  J P Raj

  Take a look at the link below

  https://pubs.VMware.com/horizon-view-60/topic/com.VMware.ICbase/PDF/horizon-view-60-scenarios-SSL-certificates.PDF

  Internal users will not be affected when you install the Security server certificates

  Simply create a CSr file > get certificates and import them to the Security server in the MMC guide explains practically everything. If you already have certificates wildcard certificates, then you can follow the sub process

  (a) export the server certificates

  (1) to connect to the server that has certificates

  (2) for this server to export it to a PFX format certificate.

  (3) open the Microsoft MMC Certificates snap-in for the computer account.

  4) navigate to certificates (Local computer) > personal > certificates.

  (5) right-click on the signed certificate that is to be exported.

  6) click all tasks > export.

  (7) on the Welcome screen, click Next.

  8) click Yes, export the private key.

  (9) if it is an option, click on include all certificates in the certification path.

  (10) enter a password for the private key. This is required for the import certificates.

  (11) to enter a file name and location. For example, C:\certificates\certificate.pfx.

  12) click Next.

  13) click Finish.

  b) import it to the use of broker or planned connection securityr.

  Certificates of thye 1) import (preferable Pfx format) for the server broker or planned connection security.

  (2) open the Microsoft MMC Certificates snap-in for the computer account.

  3) navigate to certificates (Local computer) > personal > certificates.

  (4) right-click the certificates.

  5) click on Import.

  (6) through the pfx and click Next.

  (7) enter the certificate password.

  (8) select Mark keys as being exportable.

  9) click Next.

  10) click Finish.

  (c) restart Consulting Services

  To restart the services:

  Log in as an administrator on the server that is running the Server VMware View connection server VMware View connection or VMware View Server Security.

  Click Start > run, type services.msc and press ENTER.

  In the list of services, right-click on the VMware View connection Server or VMware View Server Security service.

  Click on restart and wait for service to stop and start.

• Certificate for the server connection warning

  Hi all

  is there a way to disable the red icon on the servers of connection establishes a link for the self-signed certificate, invariably with a certification authority?

  Thank you all!

  Matrix

  It is best to install a trusted CA signed certificate. This will not eliminate only the caveat, but will also allow your users the assurance that they connect to an authentic environment and minimizes the risk of a man-in-the-middle attack.

  Mark

• SSL certificate for the Security Server external facing

  Dear all,

  Today, I bought an external SSL certificate of DigitCert for our security server. I imported the certificates in the personal certificate (computer account) on the Security Server store. DigiCert provided three certificates, root CA, CA server and the other with the name of our domain. I renamed the vdm to the friendly name of the existing self-signed certificate and used the friendly name for the certificate vdm has our domain name. Subsequently, I rebooted consulting on the Security server. They are all released on except the "Display Blast Secure Gateway" service which entered the suspended state.

  On our facility, we have a connection to the server and a security server. To the Security Server, we use a different domain name for connecting to the server. We have an internal PKI and the connection to the server uses an SSL certificate.

  connection to the server = server01.internaldomain.com

  Security Server = server02.externaldomain.com

  Why the certificate cannot be loaded to view Blast Secure Gateway? I missed something?

  Thank you

  Edy

  I solved it. It was with the private key of the certificate. This is the reason that the Blast Secure Gateway could not load.

• Error when connecting on the generator of workflow after the installation... for the first time!

  Hello
  
  I installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I'm trying to connect the generator of workflow (using the name of this particular instance database username/password), it throws me the following error message:
  
  220: cannot set NLS_LANGUAGE.
  210: oracle error: ORA-01403: no data found
  . SQL text: SELECT FROM WF_LANGUAGES WHERE NLS_LANGUAGE: l IN (NLS_LANGUAGE, CODE)
  
  In previous discussions when I searched for the same problem, I found that if
  Select the value from v$ nls_parameters
  where parameter = "NLS_CHARACTERSET";
  Returns the value of other WE8ISO8859P1 then, then that is what I should change my Builder NLS_LANG entry - i.e. AMERICAN_AMERICA. < character set >.
  
  But I don't get where should I change the NLS_LANG, located where... a file any? I'm new to workflow.
  Please help me. I tried a lot of things. Any help will be much appreciated.
  
  Thank you
  Khadi

  Khadi,

  It is windows server? You can try this

  Set NLS_LANG as an operating system environment variable:
  
  1. Select Start - Control Panel - System
  
  2. Select Environment 
  
  3. Set NLS_LANG parameter to AMERICAN_AMERICA.UTF8.
  

  Or try this

  1. define NLS_LANG Environment Variable on your PC, following below navigation :
  
  For Windows
  Start / Settings / Control Panel / System / Advanced / Environment Variables
  Define new "System Variable" NLS_LANG and assign it the value AMERICAN_AMERICA.WE8MSWIN1252
  
  Save
  
  2. Bounce the PC
  
  3. Try again database connection from Workflow Builder
  

  Concerning

  Published by: OrionNet on January 2, 2009 03:28