Cisco router some computers were able to access the internet.

I'm having a weird problem recently that some computers were unable to browse some site. I even try to put in place a different router from cisco (cisco 2811) with IOS version 15.0 and the same configuration but still no luck. Tried to reboot all devices and I also try to use the computer that is having problem to access the web connect directly to the router, but the result is the same. FYI the router being works well for a month a few without this problem. I try to use the inexpensive router like the dlink / tplink and there is no problem. Another piece of information, it's the computer that could not browse some site were able to ping the website, but fail to load in the web browser. 10 computer there are 3 unit have this problem and new features such as my customer/guest computer also were unable to browse some site. There are no firewall or any security in our regard. It makes me crazy!

My circuit diagram as below;

WAN-> router (Cisco 2821)-> switch-> computer

-See the version-

Cisco IOS software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4 (24) T6, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Updated Wednesday, Aug 23, 11 01:30 by prod_rel_team

ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)

Linear_Router uptime is 2 weeks, 3 days, 21 hours, 56 minutes
System return to the ROM to reload at 12:49:51 MAS Thu Sep 1 2016
System image file is "flash: c2800nm-adventerprisek9 - mz.124 - 24.T6.bin".

This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

If you need assistance please contact us by mail at
[email protected] / * /.

Cisco 2821 (revision 53.51) with 249856K / 12288K bytes of memory.
Card processor ID FHK1235F3T0
2 gigabit Ethernet interfaces
2 interfaces Serial (sync/async)
1 ATM interface
1 module of virtual private network (VPN)
Configuration of DRAM is wide with parity 64-bit capable.
239K bytes of non-volatile configuration memory.
1000944K bytes of ATA CompactFlash (read/write)

Configuration register is 0 x 2102

-show running-config-

Building configuration...

Current configuration: 8378 bytes
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime localtime
encryption password service
!
hostname Linear_Router
!
boot-start-marker
start the flash system: c2800nm-adventerprisek9 - mz.124 - 24.T6.bin
boot-end-marker
!
forest-meter operation of syslog messages
logging buffered 16000
enable password 7
!
AAA new-model
!
!
AAA authentication login sdm_vpn_xauth_ml_1 local
AAA authorization sdm_vpn_group_ml_1 LAN
!
!
AAA - the id of the joint session
clock timezone 8 MAS
!
dot11 syslog
IP source-route
!
!
IP cef
No dhcp use connected vrf ip
dhcp IP 30 binding cleanup interval
DHCP excluded-address IP 192.168.88.1 192.168.88.141
DHCP excluded-address IP 192.168.88.180 192.168.88.254
!
pool of dhcp IP LAN
network 192.168.88.0 255.255.255.0
router by default - 192.168.88.254
domain losb.local
Server DNS 8.8.8.8 8.8.4.4
0 0 15 rental
!
!
IP domain name losb.local
8.8.8.8 IP name-server
IP-server names 8.8.4.4

!
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
!
Crypto pki trustpoint test_trustpoint_config_created_for_sdm
e subject name =[email protected] / * /
crl revocation checking
!
Crypto pki trustpoint TP-self-signed-3132623275
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 3132623275
revocation checking no
rsakeypair TP-self-signed-3132623275
!
!
for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
TP-self-signed-3132623275 crypto pki certificate chain
certificate self-signed 01
30820250 308201B 9 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 33313332 36323332 6174652D 3735301E 170 3134 31323032 31393436
35385A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 33 31333236 65642D
32333237 3530819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8569B 674 5F07B434 8E5F9D59 D298DB7E 51FBB58A B 460084 9 34AE8461 8100D01A
471637 C F6CFC65F 9639C1C6 2 50CF9117 D459482F 1EF22E29 322F39AA 88 42306
F4B6686A 161FDD3D 69B0647B 46FC7CD0 966C03E8 D6CF9181 8E2B3514 300D980B
EE9225A6 173F7673 655A1DE8 FB720F13 0FD8E550 A7DDB314 50461510 A72C5DBE
010001A 3 78307630 1 130101 FF040530 030101FF 30230603 0F060355 A1CF0203
551D 1104 1C301A82 184C696E 6561725F 526F7574 65722E6C 6F73622E 6C6F6361
23 04183016 8014FA7F D98E6D69 462EEAED 41BEC8D3 7042F812 03551D 6C301F06
95B3301D 0603551D 0E041604 14FA7FD9 8E6D6946 2EEAED41 BEC8D370 42F81295
B3300D06 092 HAS 8648 01040500 03818100 043EC1A4 7363A7FD 3AED777D 86F70D01
CAAEC570 99 HAS 02166 A3958A66 0E5A5DD2 368C2F8B D9A96E69 9F57852C ACE0C67F
73 D 17753 53BE14C4 824BE043 B8A52822 E38DBC3C C3F33787 813FD207 0AB04004
E0303A2F 2A3BF5AA 81481429 F53C1EDD 8AC2EC48 D64DF89A 4D047B7C 6B 516970
55EAFF10 B1453DBD ABC96845 FDF7AAF9 77B8C381
quit smoking
!
!
password username privilege 15 7 kent
Archives
The config log
hidekeys
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer crypto isakmp 11
11 key
DNS 8.8.8.8 8.8.4.4
losb.local field
pool SDM_POOL_1
ACL 100
Max-users 11
ISAKMP crypto sdm-ike-profile-1 profile
identity group game 11
client authentication list sdm_vpn_xauth_ml_1
ISAKMP authorization list sdm_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec SDM_Profile1
game of transformation-ESP-3DES-SHA
isakmp-profile sdm-ike-profile-1 game
!
!
Crypto ctcp port 10000
!
!
!
!
!
!
interface GigabitEthernet0/0
Description of connection WAN to Unifi BTU
no ip address
no ip-cache cef route
no ip route cache
automatic duplex
automatic speed
No mop enabled
!
interface GigabitEthernet0/0.500
encapsulation dot1Q 500
no ip route cache
PPPoE enable global group
PPPoE-client dial-pool-number 1
!
interface GigabitEthernet0/1
internal network LAN Description
IP 192.168.88.254 255.255.255.0
IP access-group UDP/TCP in
IP nat inside
IP virtual-reassembly
no ip-cache cef route
no ip route cache
automatic duplex
automatic speed
!
ATM0/0/0 interface
no ip address
Shutdown
ATM 300 restart timer
No atm ilmi-keepalive
!
interface Serial0/1/0
no ip address
Shutdown
2000000 clock frequency
!
interface Serial0/1/1
no ip address
Shutdown

2000000 clock frequency
!
type of interface virtual-Template1 tunnel
11 description
Dialer1 IP unnumbered
ipv4 ipsec tunnel mode
Tunnel SDM_Profile1 ipsec protection profile
!
interface Dialer1
the negotiated IP address
IP mtu 1480
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer idle-timeout 0
persistent Dialer
Dialer-Group 1
PPP authentication chap callin pap
PPP chap hostname [email protected] / * /
password PPP chap 7 15381
PPP pap sent-username [email protected] / * / 132F0 password 7
!
local IP SDM_POOL_1 192.168.88.130 pool 192.168.88.141
default IP gateway - 192.168.88.254
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 Dialer1
IP http server
local IP http authentication
IP http secure server
!
!
overload of IP nat inside source list Internet_List interface Dialer1
IP nat inside source static tcp 192.168.88.89 8001 interface 3389 Dialer1
IP nat inside source static udp 192.168.88.89 8001 interface 3389 Dialer1
IP nat inside interface 80 static udp 192.168.88.102 source Dialer1 5555
IP nat inside source static tcp 192.168.88.102 80 5555 Dialer1 interface
IP nat inside source static tcp 192.168.88.90 80 Dialer1 8080 interface
IP nat inside interface 80 static udp 192.168.88.90 source Dialer1 8080
IP nat inside source static tcp 192.168.88.101 interface 8888-8888 Dialer1
IP nat inside source static udp 192.168.88.101 interface 8888-8888 Dialer1
IP nat inside source static tcp 192.168.88.101 80 Dialer1 7777 interface
IP nat inside interface 80 static udp 192.168.88.101 7777 Dialer1 source
!
Internet_List extended IP access list
IP 192.168.88.0 allow 0.0.0.255 any
!
Access-list 100 = 4 SDM_ACL category note
access-list 100 permit ip 192.168.88.0 0.0.0.255 any
Dialer-list 1 ip protocol allow
!
!
!
!
!
!
control plan
!
!
!
!
!
!
!
!
!
Banner motd ^ CC
#####################################################################
#                            WARNING!!!                             #
# This system is for the use of only authorized customers.        #
# Who is using the computer network system without #.
authorization of #, or their permission, are #.
# subject to having their activities on this computer.
# Network monitored and recorded by system #.
staff of #. To protect the computer network system of #.
# unauthorized use and to ensure that computer network systems #.
# does not work properly, system administrators monitor this #.
system of #. Anyone using this computer system #.
# consents to such monitoring and is expressly informed that #.
# If this control reveals possible criminal conduct.
activity #, the system can provide evidence of #.
# This activity to police officers.              #
#                                                                   #
# Access is limited to authorized users only.           #
# Unauthorized access is a violation of # State and federal.
# civil and criminal.                       #
#####################################################################^C
!
Line con 0
line to 0
line vty 0 4
privilege level 15
password 7
transport input telnet ssh
exit telnet ssh transport
!
Scheduler allocate 20000 1000
NTP-Calendar Update
end

Hello

try changing the size of the "ip mtu" on your Dialer interface to 1492, and/or the 'ip tcp adjust-mss' on your GigabitEthernet interfaces to 1452 and see if that makes a difference.

Tags: Cisco Network

Similar Questions

  • BlackBerry Smartphones not able to access the internet with the new carrier

    I use a curve 9220. I was using the Vodafone network. But just shifted to Airtel. I inserted the sim card in the handset. Signals come very well. But I'm unable to access the internet even though I subscribed to a prepaid internet pack.  The messege is coming like this:

    Navigation via the cellular network is not part of the includedas of your current service plan. To browse the web, you should use the Wi - Fi or contact your service provider to change your service plan.

    When went to Airtel site for mobile internet settings, I had something like this:

    Your handset does not support live Internet settings. Please refer to the table below to configure the settings manually.

    Name of the parameter  
    Account name: Airtel (GPRS)
    User name:  
    Password:  
    «"" "Home page:»»"» http://live.airtelworld.com
    Proxy: Activated / no
    Proxy address and the server:  
    Proxy port and the server:  
    Data carrier: GPRS or packet data
    Access point name: airtelgprs.com
    Authentication type: Normal
    Use preferred access point NO.

    Please suggest what to do

    Only with BlackBerry 10 you can navigate without BIS, with old devices don't.

    * Like this post

  • Does anyone know what the cause some programs not being able to access the Internet? I had this problem with TurboTax and now with my Magic Jack.

    The TurboTax program told me that I was not connected to the Internet, even though I was and now my Majic Jack, who has worked 10 months told me the same thing.  I did nothing g to my computer except upgrades of Microsoft/Windows and I am at a loss as what to do.  Can anyone help?

    Hi CherieRadigan,

    1. are you able to connect to the internet successfully?

    2. facing a similar problem with other programs on the computer?

    3. What is the full error message that you receive?

    4. do you have security software installed on the computer?

    If you encounter a problem with internet connectivity to TurboTax and MagicJack program, then check out the links below to the Publisher of the software and check if it helps.

    MagicJack

    Error failed to configure magicJack / if please connect to the internet and double click here / Internet provider cannot be found. Make sure that you have an internet connection / unable to connect to the service provider

    TurboTax

    Connectivity errors

  • PlayBook Simulator not able to access the internet

    Hello

    I'm trying to get the Playbook Simulator running to repackage an app, but I'm unable to get the Simulator to connect to the internet.  The browser refuses to connect and just displays a message indicating:

    Error
    A network error has occurred.
    Please try again later.

    I tried some things, like change network card settings in VMware default (NAT) to Bridged and then restarting the virtual machine, but that did nothing. I tried to remove the virtual computer's network card, and then by adding a new.  I disabled the Norton Internet Security firewall and intrusion prevention.  I have disabled the Windows Firewall.  None of this solves the problem.

    I use a Windows 7 laptop connected to a wireless network.  No VPN or proxy is in use.  Windows 7 network adapters screen shows two cards VMware, vmnet1 and vmnet8, both connected to an 'unidentified network'.  I tried to fill these my PC wireless cards, but the VMware adapter did not allow that and threw an error.

    Any suggestions?

    Some basics: Verify there is an IP address on vmnet8. Verify that you can ping your host operating system.

    If it still does not work, cut the developer mode (on-> them security), then try again the browser. Yes, I know it sounds counterintuitive, but it worked for me.

    You can re - switch to developer mode, once you have turned it off and it seems fine. You don't quite know why this is happening, but it might be useful to take a VM snapshot once you've cracked.

    Good luck!

  • When I connect to the start page of mozilla, I can't go to any other sites Web - get "unable to connect to the server", but I'm still able to access the internet through Internet Explorer on the same computer.

    Cannot move to the start page of Mozilla. Any site or search I run, I get a message that Mozilla can not establish a connection with the server.

    See this support article - difficulty of problems connecting to websites after Firefox update

  • can I set up parental controls for a user not being able to access the internet to all___parental controls

    is it possible to disconnect a user on the internet

    Hello

    See this and the 'related links '.

    How to install and use Parental controls in Vista
    http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

    and these:

    Setting up Windows Vista's Parental control
    http://www.bleepingcomputer.com/tutorials/tutorial139.html

    Set up Parental controls
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Equium P200-1IR - wireless is connected but cannot access the internet

    Hi there,

    Need a little help!

    I just bought an Equium P200 1IR.
    I activated the wi fi.
    I see my router which is Talk Talk.
    Can I get the laptop to connect to the router and it says I'm connected,
    However I can't access the internet.

    I tried the same process by inserting a WiFi dongle into the USB port
    on the laptop, and exactly the same thing happens.
    We have other home computers that connect to the router and the internet
    OK using the wireless dongle.
    I plugged a rigid cable between the laptop and the router connection and I can't
    access the internet immediately without any problem, however, would be delighted
    to use the wireless function.

    Any help really appreciated... Thank you

    Waynec

    Hello

    Try please reboot your router. A few weeks ago, I had a similar problem with my Satellite A300. WLAN is connected but Internet was not available. After the router is restarted all of a sudden everything was ok again.

  • Pavilion G7: Desktop Applications cannot access the Internet but metro apps can

    I have a Windows 8.1. About 5 days ago from desktop applications (IE, Chrome, Google Drive Office) has ceased to be able to access the Internet at all.

    However, apps of metro (metro IE, Facebook, Mail, etc.) can still access the Internet.

    How could it happen? That the two environments use different settings? Is there a setting or registry entry that applies only to the desktop environment?

    Analyses of viruses and malicious software (Malwarebytes and Windows Defender respectively) were not able to do what anyone. But since they are two desktop applications they have not been able to update their files of signatures since this problem started.

    I found the answer on the Microsoft site on this topic.

    The answer is to reset Winsock using this command from an administrator command prompt: "netsh winsock reset" and then restart.

    I did and that fixes the problem immediately.

  • Error message: Windows cannot access the specified device path and the second user cannot access the internet

    Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

    The second user cannot access the internet. Can't access window appears. The other user is not problems.

    Hi Rickravel,

    1. what type of account you use?

    2. This only happens when you access Internet?

    3. when the problem started?

    4. you remember to make changes to the computer before this problem?

    Step 1:

    You can start in safe mode with network and see if the problem occurs in the account.

    You can see the following link to start in safe mode with network.

    Start your computer in safe mode

    Note: Restart the computer to boot into normal mode.

    Step 2:

    If you use Internet explorer, then you can try to disable add ons and check if it helps:

    Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

    a. click on start

    (b) in the search box, type in Internet explore

    c. Select Internet (no add-on mode)

    If you were able to access the Web site without any problems, then the module may cause the error.

    You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

    How the modules of the browser affect my computer?

    Hope this information is useful.

  • Windows Vista cannot access the internet, the link speed and Duplex negotiation seems to be the problem

    I have a desktop running Windows Vista Home basic and I can't connect to the internet through a local network, which is connected through a router (Belkin). Adapter type is Internet: Intel 825562V-210/100

    After consultations with the support of technichal society of router and my PC vendor, it seems that there is aproblem with negotiating the link speed. Here are some symptoms:

    I can access the internet if I connect the cable directly to the modem;

    Connected through the router, I can sometimes connecting to the internet if Imaually change settings of connection speed (10 / 100 Mbps, half/full duplex)

    All other PC connected to the network, using Win Vista and throuhg connected to the same router, have access to the network;

    If I connect my network cable to another PC, it will have access to the internet;

    The status of my PC seems to be 'connected' on the site of implementation of routers. The State of my connection is sometimes "Local only" sometimes "Local and Internet", but in fat, there is no internet access.

    I tried the following:

    Trouobleshooting under the direction of the technical support of the router and PC vendor.

    Update the operating system to restore to an earlier date, to restore to the factory settings; Reformatting my PC 2 times, (first internet worked for a few hours only); update the OS (by connecting directly to the modem); Turning off Win Defender, removing software antivirus. Reset LAN connection...

    Any suggestion please?

    New router solved the problem.

    Thanks a lot, especially Jack :-).

    P.J.

  • in wiraless I can access the internet... but in lan, I can not... It is showing there is no default gateway... How can I solve this?

    I can access wireless internet... but in lan, I can not... It is showing there is no default gateway... How can I solve this?

    Hello

    1. you have from any other computer connected to the same network? If logged in, you are able to access the Internet on the other computer?

    2 have you made any changes to the computer before the show?

    3. What is the brand and model of the router?

    In the meantime, follow these steps and check.

    Method 1:

    First, you try to run the troubleshooter from network built into windows 7 and check if it can help solve you the problem of connection to the Internet.

    Access the link below and follow the steps.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    If the problem persists, you can manually assign the IP address and the default gateway and check if it works very well. Before assigning the IP address and the default gateway manually, make a note of the IP address on the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

    To manually assign the IP address and default gateway, follow these steps:

    a. in the system, right click on network icon tray. Choose the open network and sharing.

    b. right-click on the connection to the Local network and click Properties. c. double-click Protocol Internet Version 4 (TCP/IPv4) and assign the IP address manually.

    Example: Old IP address is 192.168.0.1

    Replace the IP 192.168.0.50

    d. let the subnet mask and default gateway are the same.

    Subnet mask = 255.255.255.0

    Gateway by default, would usually 192.168.0.1 or 192.168.1.1

    e. click apply then click Ok and restart the computer and check if it helps to solve the problem.

    Method 3:

    You can also try to contact the manufacturer of the router and try to reset the settings of the router and check if that helps you solve the problem.

    Method 4:

    Also try to uninstall the network card in Device Manager, then restart the computer. Later allow Windows to install generic drivers and check if it works very well.

    Before you uninstall the network card, I you suggests to create a System Restore Point manually, so that in this case, a problem occurs when performing these steps, you can always perform a system restore.

    Follow the steps below to uninstall and reinstall the network card.

    a. click on start

    b. the start search box, type "devmgmt.msc" and press on enter

    (c) in Device Manager, expand network adapters

    d. right-click on the network adapter and uninstall.

    e. restart the computer, and then reinstall the network card.

    When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

    You can also consult the following link:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    I hope this helps!

  • Warning of safety running a SWF file on a computer when you access the internet

    I want to distribute a SWF file to run on computers, not the internet.  However, I want to be able to access the internet through a link that is controlled by a button.  This used to work, now I get a security warning telling me that I need to change the settings on my computer.  For obvious reasons, I don't want anyone running the SWF to have to do that!

    Under Windows, I can create an EXE file that does not have security WARNING, but on the Mac which won't help.  Any suggestions?

    Hello

    How about you editing as an AIR application?

  • The user account cannot access the internet once parental used contract, even after you turn off the parental control

    I created a user account for my child. I am able to access the internet through firefox. Then I set the parental controls and can NOT access the internet more. I turn off parental controls for this user account. I still can't access the internet from this account.

    Parental control is a part of the operating system Windows and not Firefox. You can get help here: http://support.microsoft.com/ask-community/windows/

  • Firefox is unable to access the internet

    Hello

    Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.

    Best regards
    Joel Hedestig

    You can try using the beta version of firefox mobile?

    https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta

  • Is it possible to restrictions to the remote desktop users to access the Internet?

    I'm really stuck on this.

    All clients connect to the server by using Remote Desktop Session of work.

    The condition is now, I want to connect internet connection server.

    I intend to install TeamViewer so I can access the server when I go on vacation, if a problem occurs or the customer need my help something.

    The boss, don't want any employee not be able to access the internet, so now I'm stuck with it.

    Forget to mention, I'm using Windows Server 2008 R2 x 64.

    Is it possible to do this?

    I tried to look for possible ways on GPEDIT. MSC to make the restriction, but it seems that there is not something like that.

    Please help and sorry for my bad English.

    Thanks for all the help.

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

Maybe you are looking for

  • My gif files are not displayed on the web page

    My web page has some gif images that are not loading

  • 'out of paper' error message and there is paper in the printer

    I have a HP 1610 printer/Scanner with an "out of paper" error message  I installed a new cartridge, a few days ago, and the printer ask me to align the cartridge.  When I press 'OK' I get the error message "out or paper. I loaded and re-load of paper

  • Fingerprint to log on

    Hello I have an Asus M70. I created a new user account, I want to be open by fingerprint only, no password. My other user account can be opened by fingerprint or password. Is there a way that I can put my computer only one account can be connected to

  • Run from RAM vs Run of Flash

    I came across a topic in an older reference which mentions these two memory architectures. Looking around, I have could not find web pages referring to the 1600 series routers. Is run from ram a feature specific to the series 1600? What is the standa

  • Advice please: Photoshop (Camera Raw) run slow the new Macbook Pro

    Hi, last week my old Macbook 2012 Pro 13 "(8 GB of Ram, 2.9 GHz, 750 GB of storage) is dead so 2 days ago I replaced it with a new Macbook (2015) Pro 13" (8 GB of Ram, 128 GB of storage).I had heard that this computer would be the same if not faster